Recommended SCCM 2012 R2 Minimum Hardware Requirements For Small Environment?

We plan to deploy SCCM 2012 R2  CU1 and SQL 2012 SP2 for the following purposes and want to use the minimum hardware to do the job reliably:
Keep reports on hardware and software inventory and monitor performance and events on clients and servers. 
Deploy operating systems with MDT integration.
Install and uninstall applications on clients on the local LAN (as replacement for GPO software installation during reboots) as well remote laptops on the Internet (we do not have Direct Access do not have Direct Access and do not want to depend on remote
laptops needing to being logged into VPN to reach them).
Install Windows Updates and third party patches and updates (Adobe/Java updates etc.) on local LAN as well as to remote laptops on the Internet.
We only have about 500 clients.  80 percent are on the local LAN all in one building and the rest are laptops for people working on the road and at home who only sporadically connect to VPN.
Can we do it all on one server or will we need a separate server for LAN clients and a different server in the DMZ to reach remote clients?
Will we need separate disks for OS, SCCM and SQL with such a small environment or can it be all on a single physical disk or VM VHD?
Is 8GB RAM, 1 CPU and 500GB disk space enough for this (assuming 50 GB WSUS database and similar amount is OS deployment space for MDT)?

It will work, no doubt. My point was that if you want fast and responsive system, focus on the disk speed. You're good to go with single server, all in the same box.
I understand that it will "work" because I just installed SCCM 2012R2 and SQL 2012 CU10 in a lab in a VM using a single VHD and it is working fine with zero clients.
Should it still work with reasonable performance on a fast hard drive (10-15K drive or SSD) with 500 clients without having to break it out into separate dedicated disks for OS, page file, SCCM, SQL and logs?

Similar Messages

  • Minimum Hardware Requirement for Siebel CRM 8.0 for Linux Platform?

    Hi,
    What are the minimum hardware requirement for Siebel CRM 8.0 for Linux OS?

    Following are the Linux Platforms supported & officially listed in Siebel 8 Requirement Doc:
    Red Hat Enterprise Linux 4
    Siebel Gateway Name Server
    PIII XEON @ 500 MHz with 256 MB memory
    Siebel Server
    PIII XEON with two processors @ 500MHz with 1 GB memory
    Web Server
    PIII XEON @ 500 MHz with 512 MB memory
    Database Server As recommended by DB vendor
    Oracle Enterprise Linux 4 Siebel
    Gateway Name Server
    PIII XEON @ 500 MHz with 256 MB memory
    Siebel Server
    PIII XEON with two processors @ 500MHz with 1 GB memory
    Web Server
    PIII XEON @ 500 MHz with 512 MB memory
    Database Server As recommended by DB vendor
    Novell SUSE Linux Enterprise Server 9
    Siebel Gateway Name Server
    PIII XEON @ 500 MHz with 256 MB memory
    Siebel Server
    PIII XEON with two processors @ 500MHz with 1 GB memory
    Web Server
    PIII XEON @ 500 MHz with 512 MB memory
    Database Server As recommended by DB vendor
    Regards,
    Shalabhsneha

  • Minimum Hardware Requirement for SAP Business One For HANA

    Hello EveryOne,
        I want to install SAP Business One for HANA (On Premises) Version on my Laptop. What would be the minimum hardware requirement for that so that it can run smoothly on the system.
    Is it can install on laptop or I need to buy giant server.
    Thanks in advance

    Hi Idrees,
    Check following links:
    http://help.sap.com/hana/SAP_HANA_Server_Installation_Guide_en.pdf
    http://help.sap.com/hana/SAP_HANA_Master_Guide_en.pdf
    http://help.sap.com/hana/SAP_HANA_Server_Installation_Guide_Unified_Installer_en.pdf
    http://help.sap.com/hana/SAP_HANA_Installation_Guide_en.pdf
    One more thing to note that you can use only HANA Certified Hardwares for B1 (Dell, Fujitsu, HP, IBM, HUAWEI)
    Hope it helps.
    Thanks & Regards
    Ankit Chauhan

  • Minimum Hardware Requirements for MDM 5.5 SP2

    What is the minimum hardware requirements for MDM 5.5 SP2?  For what I am doing, I expect to have 25-50K records stored in it.

    The question is clear but answers may vary from one repository to another. How many fields your main record will  have, how big lookup tables will be, how complex your taxonomy with attributes will be, and so on. But! The good news is you may try it even on your laptop. I got an impression it's for your own playing and experiments but not production yet. If you computer allows to run MSSQL and it has other I'd say 50-100Mb of memory free it may be enough. But again, it really varies.
    For production-oriented precise estimations you can read an official sizing doc at SMP - quick link /instguidesnw04
    The rule of thumb - the faster/bigger computer the better:-)

  • Minimum hardware requirement for Report server with 4 engines ??

    Hello all ,
    Can someone please tell what is the minimun Hardware requirement to be able to run a Oracle 91 AS with report server having 4 engines ??
    and where I can find this kind of documentation.
    We have a Oracle9iAS Containers for J2EE running on a machine with under 1 ghz power and around 300 mb RAM
    , but the report server seems to keep crashing ..
    Can anyone pls advice
    Thanks

    Hi,
    For calculating the minimum hardware requirements, you may need to look at various factors:
    1. No of reports requests that need to be processed per second
    2. Whether all these requests are synchronous or asynchronous
    3. Response time required
    4. Type of reports - large amounts of data, large no of images, etc
    5. How much caching you are using
    6. No of queries in your report
    7. Simple / complex layout of the report
    and so on.
    So just the information of 4 engines may not be sufficient for trying to calculate the hardware requirements. One useful reference point for you may be the Oracle9i Reports Scalability whitepaper:
    http://otn.oracle.com/products/reports/index.html
    It lists the number of users supported on some pre-defined hardware configurations, and the average response time for the reports server.
    You might also want to take a look at the paper on "Tuning Oracle Reports":
    http://otn.oracle.com/products/reports/htdocs/search.html?cat=SAP&col=ALC&submit=Search
    However, it is also possible that your Reports Server is crashing due to some other problem (not the hardware configuration).
    By the way, your RAM seems to be too low for Oracle9iAS installation. See the installation guide for minimum hardware requirements.
    Navneet.

  • The minimum hardware requirements for Windows 8.1 Update 1

    Hi
    What are the minimum hardware requirements to install Windows
    8.1 Update 1 on a computer?
    Thanks
    Bye
    Balubeto

    does every machine not have 1ghz+....   
    go ahead and try running windows 8 with those specs and even better run the steam overlay too and see what happens.
    any decent processor is 3.4ghz+ with 8gb of ram not to mention that dx11 came out with windows 7... 
    there is cell phones with better specs than the min requirements so both your posts are useless.  
    there is a standard to uphold and that is exactly what i always trying to do my best at.
    why sell a copy of windows if its just going to frustrate a customer when its not perfectly compatible with the system?
    o... lets just have everyone install windows 8 because its new and this page says it can handle it...
    lets make it 64bit too because higher numbers are cooler...  because it wont matter if its suppose to have 32bit...  
    iron8orn AMD FX [email protected] on MSI 970A-G46 8gb ram cas 8 1600mhz cpu-nb 2400mhz MSI hd7850x2 ht-link 2400mhz

  • Minimum Hardware Requirement for Oracle11gAS Client PC

    as subject, can anyone give me some feedback? thanks!

    Assuming you are referring to Fusion Middleware 11, I will start by saying that this is a product set of many components and install options. To even offer a suggested recommendation for hardware would heavily depend on exactly what you are planning to install and do with this installation.
    I would recommend review the product installation guides. That said, when reviewing the minimum requirements for memory (RAM), I would recommend that you consider at least adding 15-20% more than what is document. Remember that these are minimum requirements for installation and basic use and not requirements to actually use these products in production with load.
    Product Documentation
    http://download.oracle.com/docs/cd/E21764_01/index.htm
    System Requirements
    http://download.oracle.com/docs/html/E18558_01/fusion_requirements.htm
    Also note that in most cases, reference to memory (RAM) is for the product and not necessarily the box. Unless otherwise noted in the document, you need to consider everything else you are running on the machine including the OS. So, for example, if the install guide says you need a minimum of 2gig of RAM, this does not take into account what the OS needs. So, in this example, consider the 2gig documented plus 20% (as suggested above) plus about 1.5 gig for the OS and other minimal apps running, you would need approximately 4gig of RAM just to complete an installation and execute basic features. In many cases the documentation now refers to "minimum RAM" and "available RAM". "Available RAM" in the document refers to RAM plus swap (virtual memory). My recommendation is not referring to swap. Although the documentation is correct and does work, you will be much happier with more RAM installed.
    Bottom line, in the case of RAM, more is always better. However, remember that on some 32bit OSs there is a limitation as to how much RAM can be accessed. Be sure to refer to the OS documentation for details.
    I forgot to mention, your question would probably get better feedback in the "Applcation Server" forum area:
    Oracle Application Server - General
    Edited by: Michael Ferrante on Aug 2, 2011 10:21 AM

  • Hardware requirement for hosted environment

    we want to host SAP B1 for one our client at our premises. all users of client will access SAP through Citrix. we are planning to host SAP and citrix on single server. number of users will be 10-15. what will be hardware requirement. there is one sap add on (copy express) and one customized add on.
    Processor= number of cores and speed
    RAM=
    internet bandwidth=

    hi ash7319,
    greetings of the day.
    well the hardware and software requirements are as per the need of ur usage.
    if u r looking at 15 users, then u need to have atleast 1GB for every 4 users in the intranet.
    if again via citrix, then u need more.
    well the suggestion that can be recommended is that u can have the following.
    8 GB RAM
    250GB HDD if no other application is running, if any other application then its better u have 500GB with RAID 1+0.
    Xeon Processor would be the best with two processors.
    two sockets.
    preferably IBM server.
    thanks and regards.
    Vijay M. Patil.

  • Minimum Hardware Requirement for AVCHD-Video & Final Cut Express 4

    Hey there,
    I am currently searching for a computer to cut my private HDTV-Video (AVCHD format) and tend from rather buying a 4-core water-cooled Windows-PC to switch to a mobile apple solution.
    Who knows which models of the current MacBook Pro - line are fast enough to handle AVCHD-Videomaterial in real-time? Is a 13inch 2,4GHZ Core 2 Duo fast enough, or the 2,66GHz version required, or even the 15inch with the better graphic card an issue?
    Thanks,
    Tom

    You can edit AVCHD without to much of a problem on any Mac model. Most operations can be done realtime, though some it will be impossible to pull of in realtime. If you are using Final Cut, the operations that can be performed real-time are clearly indicated. Those that aren't realtime are typically things that go beyond basic composition.
    For non-realtime manipulations, the speed is directly proportional to the CPU and bus speeds of the Mac.
    When you export your finally rendered edits, however, that process can take time, depending on the nature of the transcoding and rendering involved. There's not much you can do about that. Even a dozen CPUs won't typically speed that up. However, there's hope that future versions of iMovie and Final Cut will support GPU-accelerated codecs that will improve that situation a lot.
    That said, what's really important for video editing is: gobs of fast storage, and a really big display. Imagine that you are editing 1080i content. At full resolution, that's 1080x1920 pixels. If you're video editor is a typical NLE, you've got to accommodate the timeline window, the viewer, the canvas, and the clip library on screen all at once. In a pinch, you might be able to work with a tiny screen on the go (with the windows overlapping one another, or tabbing between them), but you're going to want to do most of your work using something with a LOT of pixels. AND, if you are doing it professionally, you're going to want to make sure that the displays are properly color-calibrated.

  • [SOLVED] - Minimum Hardware Requirements ??

    I've searched the forum and used Google to search for the Minimum Hardware requirements for Arch Linux (archlinux-2011.08.19-core-i686).
    References in the searches state that the information is in the Install Guide, but I can't locate it in there.  I do see the reference to the CPU type.
    Some references in the searches state 128M RAM and others state 192M?  Has this been updated for the latest Version?  Or, has this information
    been moved or deleted from the Install Guide/Wiki?  If so, where is it located?  Please help me find the Current Hardware Specifications.
    Thanks.
    Larry
    Last edited by lkraemer (2012-02-22 13:41:56)

    "A Pentium Pro, Pentium II or AMD Athlon (K7) processor or higher is required. (technically, cpu's without the cmov instruction such as AMD K6 and via C3 are also i686, but we use gcc and it uses cmov instructions)."
    # cat /proc/cpuinfo | grep flags
    If there's a "cmov" in there it should be fine.
    http://askubuntu.com/questions/5807/wha … nstruction
    Ubuntu dropped support for it with the 10.10 release (2010).

  • Hardware requirement for J2EE

    I am on the evaluation of different technologies, I tried to get out the details of minimum hardware requirements for
    Developers' Desktop,
    Developement Server,
    Production Server,
    with regards to the J2EE. I could not find the same on any of the documents, I may be searching wrong docs. Can any one help me on finding the Hardware specs required for the above 3 categories?
    regards
    Mehul Trivedi

    Hi Sudeep,
    On the following links you will find the Composition Environment Product Availability Matrix and the installation guide of Composition Environment 7.1 Developer Edition.
    SAP NetWeaver Composition Environment 7.1
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0e9cc7b-0469-2a10-d3a8-f4f04b30fb0b
    For accessing the Product Availability Matrix document the service marketplace access is required.
    Best regards,
    Yasar

  • Hardware requirement for Fusion Applications HCM installation

    Hi Team,
    I want to install fusion applications for HCM.
    Can any one suggest the minimum hardware requirement for installation.
    Please help me with any documents.
    Thanks,
    Chandra

    Dear Chandra,
    Please note that Fusion Applications installation involves following components.
    1. Oracle Identity and Access Management components (Middleware infrastructure)
    2. Oracle Database for IDM
    3. Oracle Database for Fusion Apps
    4. Fusion Applications Domains (includes Admin and managed servers for Fusion Applications)
    I have posted a guide on installing Fusion applications on 2 node setup and if you have sufficient hardware to host 2 VMs then it can be done on single server as well.
    http://www.oratraining.com/blog/2013/03/oracle-fusion-applications-installation-step-by-step-guide-11-1-6/
    This will explain the 2 node architecture which I have prepared.
    http://www.oratraining.com/blog/2013/03/fusion-applications-architecture-for-2-node-setup/
    The minimum memory requirement changes if you select more products since in Fusion apps each products have their own domain and if you select more products then there will be more application managed servers (even if you don't select a product family, it will still create some managed weblogic servers based on dependency with selected products)
    The minimum memory requirement to host IDM and consolidated DB in 1 node is 10-12 GB
    The minimum memory requirement to host Fusion Applications domains on 2nd node is 64 GB (for 1 product family, for all products selected then 128 GB)
    Please note that these are "minimum" requirements based on my experience, not as per the documents since what we are talking about is installing for "learning", not for production, where you will host various components in separate nodes.
    Thanks
    Tushar
    www.oratraining.com

  • Hardware requirement for CE7.1 for the development purpose

    Experts,
    How to calculate the hardware requirement for using CE7.1 for the development purpose? Do you have some parameters or guidelines for it?
    We will be using CE7.1 for the development of EP contents,  Web dynpro, Web services and Guided procedures.
    We need to calculate minimum hardware requirement for this purpose, but could not find the authorised document from SAP.
    I searched in the SDN. It is available for NetWeaver 7.0 but not for CE7.1.
    Any hints will be highly appreciated.
    Regards,
    sudeep

    Hi Sudeep,
    On the following links you will find the Composition Environment Product Availability Matrix and the installation guide of Composition Environment 7.1 Developer Edition.
    SAP NetWeaver Composition Environment 7.1
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0e9cc7b-0469-2a10-d3a8-f4f04b30fb0b
    For accessing the Product Availability Matrix document the service marketplace access is required.
    Best regards,
    Yasar

  • Minumum hardware requirement for Siebel Document server?

    what is the minimum hardware requirement for Siebel document server?

    To install the Document Server, perform the following steps:
    Obtain the required hardware.
    Install the Siebel Server.
    Install third-party applications.
    After installing the Siebel Server, you may have to follow some of the steps described in Configuring the Document Server. The Document Server is a component of Siebel eDocuments, which can be installed during installation of the Siebel Server. Consult with your system administrator to verify that the Document Server has been installed and configured according to the requirements listed in the following sections.
    Hardware Requirements
    The Document Server is supported on the Windows 2000 platform. To maintain stability and performance, the Document Server must run on a dedicated host machine. The Siebel Server on this machine should host one instance of the Siebel eDocuments component group. No other components should be running other than required system components.
    To support more users, you can run additional instances of the Siebel eDocuments component group on additional dedicated host machines.
    Installing the Siebel Server
    Install the Siebel Server on the dedicated host machine of the Document Server. For more information about installing the Siebel Server, see Siebel Server Installation Guide for Microsoft Windows.
    During installation, you will have the option to enable component groups. Select the Siebel eDocuments component group. Do not enable any other component groups.
    This step can also be performed after installation is complete, as described in the section Enabling the Component Group.
    Installing Third-Party Applications
    You must install Microsoft Word.
    To install Microsoft Office
    Log on to the server machine using the same user account that the Siebel Server NT service uses. This user account must belong to the Administrators group.
    NOTE: The install must use the same account to be used by the NT Service. The installer configures COM security settings so that the installing user account will have the correct permissions to access and launch the application. If the install uses an account other than the Siebel Server NT service account, errors may occur when the Document Server tries to launch the application.
    Install Microsoft Office using a Typical, or complete, installation. Verify that your version of Microsoft Office will install the Web Authoring Tools (HTML) component with the Typical installation. If it does not, you will need to use the Custom installation option, and install all of the typical components as well as the Web Authoring Tools (HTML) component.
    Start the applications that will be used by the Document Server. This forces the applications to register themselves.
    Close the applications.
    Regards,
    Joseph Arul Dass

  • Hardware Requirements for SOLMAN

    Hi everybody,
    I'll appreciate (with points ) if somebody can give me the minimum hardware requirement for installing Solution Manager in a Windows machine.
    We are about to install a ECC 6.0 (with IS-U/CCS) for building a Demo.
    Thanks,
    Jessica.

    H/W specification for Solman 4  for Windows/Oracle Standalone
    RAM -  3 GB min
    HDD - 80 GB 
    CPU - 2 (1 CPU also will do)
    You can check under https://websmp107.sap-ag.de/instguides under SAP Components->Solution Manager
    You check the hardware and software requirements for your operating system (OS) and the SAP instances using the Prerequisite Checker tool.
    The Prerequisite Checker provides information about the requirements that you need to meet before you start the installation. For example, it checks the requirements for the different installation services.

Maybe you are looking for

  • Can't see 0ven_purorg(vendor number - purchasing view) in the AWB

    Hi Experts, I used the 0ven_purorg_attr & 0ven_purorg_text master datasources & loaded the master data into 0ven_purorg infoobject. I started the proceedure from the source system replicated the data sources on the BW side & assigned the BC infosourc

  • Why leopard DVD not installing to powerbook G4 with Mac OS X 10.3.9? Help.

    I'm trying to install leopard DVD to my daughter's powerbook G4 with os x 10.3.9. During the installation process, it says unable to install 10.5, mac os x 10.4 or later could not be found.....how am I gonna do this. Please help...

  • Does the address returned by GetDirectBufferAddress() change over time?

    Let say I have a direct ByteBuffer instance allocated from the Java side using the ByteBuffer.allocateDirect(capacity) factory method. This buffer instance lasts for the entire lifetime of my application. Can the address of the buffer change over tim

  • FIM Maintenence jobs

    Hi, We are facing some issue in FIM performance and came to know that there are some FIM maintenance/housekeeping jobs  are not running properly. Due to this there are lot of  orphaned object and ERE are created. Could any one please suggest below. H

  • CS6 master collection Cross OS compatibility

    Just bought the CS6 master collection (student edition). Problem is, I've got a Mac, and the box says windows (on only one side in small print ) Can you install/activate the Windows version of this software on a Mac with the disc from the Windows ver