Recommended setting for good guitar tone

Hello all,
I'm a new garageband user and would like some recommendations on getting some good guitar tones. I have been fool'n around with the amp settings and have found some fairly decent tones but if anyone would like to chime in and post their settings that would be most excellent.

Very true, Let's say something like a 65' deluxe reverb ( ala Roy Buchanan )

Similar Messages

What's the recommended setting for "Process memory usage" ("process virtual" in UI) for a 64-bit host on a 64-bit OS?

Hi gurus
In resource based throttling, what's the recommended setting for "Process memory usage" ("process virtual" in the resource based throttling tab of the UI) for a 64-bit host
on a 64-bit Windows OS?
According to MS (http://msdn.microsoft.com/en-us/library/ee308808(v=bts.10).aspx):
"By default, the
Process memory usage throttling threshold is set to 25. If this value is exceeded and the BizTalk process memory usage is more than 300 MB, a throttling condition may occur. On a 32-bit
server, you can increase the Process memory usage value to 50. On a 64-bit server, you can increase this value to 100. This allows for more memory consumption by the BizTalk process before throttling
occurs."
Does this mean that 100 is the recommended setting for a 64-bit host on a 64-bit Windows?
Thanks
Michael Brandt Lassen

Hi Michael,
Recommended setting is the default setting which is 25 .dot.
If your situation is abnormal and you see message delivery throttling state to “4” when the following performance counters are high or if you expect any of you integration
process could have impact on following counters, then you can consider the suggestion by Microsoft. Don’t change the default setting.
High process memory
Process memory usage (MB)
Process memory usage threshold (MB)
You can see these counters under “BizTalk:MessageAgent”
You can gauge these performance counter and its maximum values if have done any regression/performance testing in your test servers. If you have seen these counters having
high values and causing throttling, then you can update the Process memory usage.
Or unexpectedly you’re process high throughput messages in production which is causing these counters to go high and cause throttling, then up can update the Process memory
usage.
The above two cases where I know my expected process usage (by doing performance testing) or suddenly my production server processing has gone high due to unexpected business
hike (or any reasons) which caused throttling, then do changes to default throttling setting.
Just changing the default setting without actual reason could have adverse effect where you end up allocating
more processing capacities but the actual message processing message usage ever is low means you end up investing in underutilised resources.
Regards,
M.R.Ashwin Prabhu
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

Why is my iphone 5 not using default ring tone even though it is set for my personal tone in defaults!!

Why is my iphone 5 not using default ring tone even though it is set for my personal tone in defaults!!

Hello Rob,
Welcome to the Apple Support Communities. You may have a contact that has a different ringtone assigned to it. Just navigate to the contact and see what ringtone is assigned to them.
iPhone: Ringtones
http://support.apple.com/kb/ta38610
Setting Ringtones
In addition to the default ringtone, you can assign individual ringtones to people in your contacts so that you can tell when a particular person calls.
Alternatively you can reset all settings in Settings > General > Reset > Reset All Settings. This would put your iPhone at factory default on everything settings wise and it does not touch the data on the phone
Regards,
-Norm G.

Export Media from DV Pal to AVI: Best recommended setting for Output file?

I have a project in CS4, on Windows, in DV format (original videos were M2t).
What is the optimal setting for export (and possibly for the sequence settings too) for the best quality and then smallest size?
If my input is M2T files - is the best settings to work in Premiere is DV 1 for Pal?
I always use Progressive Interlace - is that required or is the default of Lower field OK as well (I am not sure exactly what is the impact of using just one field, but from previous versions of Premiere Progressive always improved the video image)?
Is the frame rate of Pal as 25 FPS must be adhered in the sequence setting and export to avoid re-rendering?
As for the Export side:
Is using the DV Pal is best for quality without going uncompressed?
Is starting with 16GB of DV as m2T and ending with 20GB of DV reasonable?
Is the method of exporting to DV and then compressing it using a 3rd party is the best way going about the creation of the movie and then compressing it for distribution?
What is the the recommended tool for compressing - and with which format?
The end result is meant to be consumed as an AVI on people's desktop. Not on mobiles or YouTube or DVD.
On BitTorrent I see many files that are in HD but have an amazingly small size of less 1 GB - what do these guys use to achieve such small sizes yet amazing quality?
What is the best tool and codec to achieve a compression based on a file size?
Is DivX better than XVid? And is "Multipass nth pass" is the way to configure the DivX for best results?
I really feel we lack any guidance on these aspects and a huge of time is wasted every time I get to this stage when it should all be pretty standrad for me.
I know I am asking a number of question but if someone is able to jot down the basics of the tool, codec and settings to achieve best quality (regardless of the time it takes to get to it) - I'd be very grateful!
Merry Xmas and a Happy New year to all,
Eroka00

I find your post somewhat confusing.
These m2t are they converted?
Run a file that you are using in Prmeiere through Media Info and post a screendump.
http://mediainfo.sourceforge.net/nl
What is the endproduct going to be? YouTube, DVD, media player or .....

Zen MicroPhoto 8gb - Any advice on changing the customize equalizer setting for good sou

Hi, I was wondering if those of you who?customize your equalizer, what setting do you guys put it on to listen to music. Any recomendations that would make my music sound good?. Thanks.

80Hz = 2250Hz = 5Khz = 34Khz = 63Khz = 7?Bass Boost = ON?Try that....

Setting for best quality in compressor

Hi.
I'm running FCP 5.1 and Compressor 2.3.1. For best quality videos on youtube I've heard it's a good idea to max out the free space they make available to you. What are the best settings I should use in Compressor for maximum quality uploads to youtube? Also what's a good setting for good quality video with a smaller file size? Also I should note most of my videos uploaded are of short duration 1 minute to 5 minutes. I've been using the settings DVNTSC and it's okay but maybe there's something better you can recommend? Also I tend to use Toast to burn DVD's. What's a good setting for best quality dvd's?
thank you!

For Youtube encoding, read these: http://www.kenstone.net/fcp_homepage/you_tube_redux_gary.html and http://www.kenstone.net/fcp_homepage/you_tube_hd_gary.html
Keep in mind that the more compressed the file is (smaller file size), the lessor quality.
As for DVD compression, I've always found Toast's encoder to create poorer quality DVDs than Compressor or DVD Studio Pro. The best method would be to export a self-contained or reference movie from FCP (Do NOT use QuickTime Conversion), then import that file into Compressor. Use the DVD preset in Compressor that best matches your movie's duration. You can duplicate and adjust presets as needed for your particular movie. Compressor will create the needed MPEG-2 video file (.m2v) and Dolby Digital audio file (.ac3). Import those two files into DVD Studio Pro for authoring and burning.
-DH

Help required: Configure output for goods issue

Dear All,
My requirement is to trigger an output type for a goods issue only when the goods movement
scenario involves cross company accounting. What is the TCode for doing the requirement setting
for goods issue output.
Thanks.

Hi,
Please check it out,is there any standard requirement is there for your scenario,if it is not there as ABAP people to write one requirement in VOFM and assign to this condition type.

Output Determination Configuration Setting for GoodsIssue(Transfer Posting)

Hello Gurus,
Can any one give the details for Output Determination Configuration Setting for Goods Issue(Transfer Posting).
Thanks N Regards,
Venu MG

hi,
PRINT OUT OF MATERIAL DOCUMENT AT GI/Transfer posting:
1. Maintain the Printer Name in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Printer Setting
2. Ensured in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Item Print Indicator, 1 stands for Matl Doc print out
3. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Print Version, maintain Print Version 2
4. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Maintain Print Indicator for GI/Transfer Posting Documents
5. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Maintain Output Types, for the Output types WE01, WE02 and WE03, ensure the foll:
a. Default Values: Dispatch Time is 3 or 4 as per reqmt. and Tr medium is 1
b. Print Parameter is 7
6. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Printer Det->Pr Det by Pl/StoLoc, maintain the Output device for all your Plants
7. In MN21, for Tr Type WE, Print Version 3, maintain Print Item as 1.(Condition records)
8. While doing MIGO, ensured that in General Tab, you get "3 Collective Slip" beside the Print Indicator and you tick mark the field.
Now go to MB90 entered the output type as WE01, Tr m as 1, Sort or. 01, Pro.mode as 01, and executed. Sytem outputted all the material documents that has to be taken print out.
Regards
Priyanka.P

CIN Setting for Capital goods (RG23C)

Hi,
Presently, after doing Goods Receipt (MIGO) when trying to update RG23C Part 1 in J1I5 with reference to the material document and choosing classification as ROP, the system doesn't find any data.
When trying to Capture Excise Invoice in J1IEX, the ETT comes GRPO whereas it should have been CAPE.
Can any one provide the complete setting details for handling of Capital goods as well as the configuration details for CIN Setting for Capital goods (RG23C)?
Thanks in advance
Note : Please search forum before posting.
Edited by: Jeyakanthan A on Jun 4, 2011 11:17 AM

Hi,
try to open now,
[http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/808c60ca-013b-2c10-34a2-94d1eb442e6f?quicklink=index&overridelayout=true]
Check it once again now
Regards
Kailas ugale

GI:How to set Indicator:Item Not Relevant for Goods Movements LIPS-NOWAB

Hi,
does anybody know what i have to do to get the Indicator: Item Not Relevant for Goods Movements set for a good issue delivey position? (Table LIPS field NOWAB)
thanks in advance
Steffen

Hi,
the thing is the following (maybe it doesn't work at all, i don't know) :
a) i have a "Non-stock" material (e.g.material type NLAG)
b)this material should be picked, so it should be relevant for the delivery (e.g.item category TAX)
c) for a special reason the "Total goods movement status" in the outbound delivery header shouldn't be "Not relevant", therefore i assigned the item category TAX to a shedule line category that has a movement type (e.g. CN)
d)but the bad thing is, that the customer has set the indicators "quantity updating" and "value updating" for the material type NLAG, and so the goods issue posting gets some errors. eg.g missing storage location etc.)
During debugging i found a coding that checks the sign NOWAB of lips, the documentation says:
"You can use this indicator to control whether the item is relevant for goods movement when the delivery is still being created.
When this indicator is set, goods movement is not posted for this item - regardless of the movement type assigned to it."
So i head the idea it might be possible to set this indication (Lips-nowab) somewhere in the sales order or somewhere else but maybe this conflicts with point c) above .
Maybe shomeone knows what to do or has a better idea.
Best regards
Steffen

How do you host your external videos for good interactive PDF playback? Recommendation needed.

I'm trying to find out a good solution for adding externally hosted video content to an interactive PDF.
I understand that Vimeo/YouTube is out so I'm hoping to host content with a dedicated (payed service) video host.
Does anyone have a recommendation of a good video host for this purpose or indeed any tips/pitfalls in doing it this way?
The document needs to be lightweight so I can't embed videos.
Thanks!

I use iDefrag.
http://coriolis-systems.com/iDefrag.php
The also have a program called iPartition that does non-destructive partitioning very well. Coriolis Systems seems to do an excellent job writing their software in a way that respects OS X. Check out their website for a demo and a list of features.
I use the online defrag (it's quick and easy) once a week or so, and every three weeks or month I run a full defrag. To do a full defrag you need to either start up from another drive with iDefrag on it (I use my external Firewire drive) or burn a CD using the included utility to start up from.
I've been very impressed with this software and have found it invaluable for installing BootCamp on some laptops that had fairly full HDs where otherwise Boot Camp would say it couldn't partition.
iDefrag also optimizes the order of files on the disk and places metadata at the start of the drive for quick access. You can specify or create custom optimization algorithims if you have particular needs that vary from the norm.

Is there a way to set up a dial tone or a way for someone who is hard of hearing to have the phone set up to make a noise when I hold it up to my ear?

Is there a way to set up an dial tone or set the phone up to make a noise when I hold it up to my ear when i use it

I'm also not sure what you want to accomplish by this. Until you hit the "call" button, the phone is not 'off hook' like a traditional landline would be. There is no such thing as a dial tone on any cell phone. The dial tone was simply a carrier signal from the central office that prepared that end to listen for the pulses (later tones) generated when you dialed.

How to set up different ring tone for Facetime

how to set up different ring tone for Facetime

I don't think that on an iPhone that FaceTime has a separate setting, you can only set a ringtone (which will apply to phone calls) via Settings > Sounds, or set different tones for different contacts via the Contacts app - but you can't have a separate sound for FaceTime

Looking for good quality head set

I am looking for a good quality in head set for my 8100 pearl. The problem is that all the really high quality headphones have a 3.5mm plug. Does any use the 2.5mm in ear sound isolating head set sold on the Blackberry site? Do they have a good quality sound?

Oh, so for a Browser/Internet, not the OS!
A Slider...
http://download.oracle.com/javase/tutorial/uiswing/components/slider.html
Here's one Menu builder...
http://dhtml-menu.com/
Not sure what the requirements are, but it looks like it uses Java.

What is the recommended set up for Final Cut Pro re: Scratch Disks etc

What is the recommended set up for Final Cut Pro with regards to Scratch Disk etc.
I have a lot of projects and at the moment they are all over the place on various external HDDs etc.
I just bought a new Firewire 800 External HDD and want to get everything straight but I'm not quite sure where to start...
Any advice would be appreciated.
Thank You

Media Manager (available from the File menu bar item) will consolidate all elements of your project together with a linked copy of the project file to a single folder in a location of your choice. There are various options to leave out unused footage, include handles etc. Safest way is to copy the files. Delete the originals when you are sure the copy works.
The user manual has a detailed description of how MM works.

Recommended setting for good guitar tone

Similar Messages

Maybe you are looking for