Recommended settings for TP-Link ADSL Router

Hi Everyone,
After spending 6 months trying to troubleshoot the disconnections with my HH3, i've bitten the bullet and bought aTP-Link TD-W8951ND ADSL2+ router.
I've got the router up and working without any issues, but there are loads of settings that I'm unfamiliar with.  Rather than just poke and hope, I'll take any advice on how i conifgure this router to get the most out of my ADSL connection, and get most fro my Wifi coverage.
Thanks in advance!

Ok, the situation has now become a nightmare.  Spent all last night suffering from Xbox live disconnects, and time outs.  Lots of Xbox codes, that all appear to relate to the response for their servers being too slow.  Tried forwarding all advised ports on the router but no improvement whatsoever.
Tried this on 2 xboxes in different parts of the house, both the same issues.  Also nticed that XBMC on media PC would not connect to content servers.  Internally, the streaming from my server to media PC seems better than ever.
Following morning tried xbox again, and it still times out.  Swapped the TP-Link router for my BT Homehub and getting the same issues, and it's still timing out.  Eliminated everything else from the set up, so that it goes router to xbox direct, nothing else plugged in.  This seems to have resolved the issues.  Tried again with a direct connection using the TP-Link but once again it times out.
It does all seem to point towards the TP-Link not working as expected.
Anyone any ideas?

Similar Messages

  • Settings for Parellel sequence in routing

    Pl. tell me hoe to do settings for Parellel sequence in routing , if there are 4 opn s , 10, 20 ,30, 40 .
    10,20,40 are in standard seq. , but  30 is in parellel with 20.
    pl. revert.
    Regards,
    RM

    Hi,
    In your standard sequence, create operations 10, 20 & 40 as per normal.
    Now click on Sequence icon (Ctrl + F5), then click on new & in the pop up box select parallel operation.
    In the popup box give a meaningul description, give the branch & return operation as 0020. Now a parallel sequence is created, double click on this one & add the operation 30 in this.
    You can go to the graphical view & check if it as per your need.
    Hope the above solves the issue.
    Regards,
    Vivek

  • What are Novells recommended settings for policies

    Hello,
    Who can tell me please what are Novells recommended settings for policies? Should we make a few big Policy where everything is handled (for example a policy for standalone workstations, one for desktop PCs, one for notebooks etc..) or single policies (for example "Desktop Wallpaper", "Enable Active Desktop", or "Turn off Aero Shake window minimizing mouse gesture" and so on) and put them in a PolicyGroup. What is the best way?

    The fewer the policies the better.
    Generally Folks do something such as a WS assigned policy as a baseline
    and then a user one to over-ride.
    Trying to create one policy per setting would likely cause windows great
    confusion as well as being very slow.
    On 3/14/2011 7:36 AM, Schneekette wrote:
    >
    > Hello,
    >
    > Who can tell me please what are Novells recommended settings for
    > policies? Should we make a few big Policy where everything is handled
    > (for example a policy for standalone workstations, one for desktop PCs,
    > one for notebooks etc..) or single policies (for example "Desktop
    > Wallpaper", "Enable Active Desktop", or "Turn off Aero Shake window
    > minimizing mouse gesture" and so on) and put them in a PolicyGroup. What
    > is the best way?
    >
    >
    Craig Wilson - MCNE, MCSE, CCNA
    Novell Knowledge Partner
    Novell does not officially monitor these forums.
    Suggestions/Opinions/Statements made by me are solely my own.
    These thoughts may not be shared by either Novell or any rational human.

  • Creating a PDF from Word 2003: recommended settings for screenshot pictures without artifacts?

    My Word 2003 document shows screenshots from text dialogs (some 100% and some in reduced size).
    While the quality of the pictures is good in the MS Word viewer, my created PDFs show artifacts mainly at the black texts:
    the single characters are eroded or dilated!
    The viewing quality does not increase if I zoom in (e. g. to 200%).
    I tried settings without picture compression, but there are still artifacts.
    a) I add the screenshots via copy&paste using a snipping tool (= "snagit").
       Can I improve the import of pictures to Word?
    b) How can I select PDF creator settings which do not apply any compression (= original bitmap)?
        Or is it the priciple of PDF to compress the pictures anyway?
    Hope for some helpful hints!

    I generally just print to the Adobe PDF printer, but then I am generally not using links and such (actually I don't tend to use MS products and thus don't even have PDF Maker in my applications. However, the bookmarks and links are the most useful to a lot of folks. The tags provide the accessibility aspects and the formating information. The latter is useful if you want to try to come backwards at some point (or allow others to do that). However, it is almost always better to keep the original so you never have to come backwards. I can see the accessability aspects to be useful, particularly for universities and government organizations. For businesses, it may vary with the type of business (unless the government puts more regulations in place!).
    Typically, the tags are the factor that causes the most bloat in the resultant PDF. If you use lots of different fonts and embed them (always recommended), then that creates another form of bloat. Graphics that maintain more resolution that is needed can cause a lot of problems. I used to have one student who would embed 2400 dpi graphics in word files. I had to turn off graphics viewing in word because it would crash my system (the memory leaks in MS products are some of the worst). Simply reducing the resolution to 300 dpi (or 600 dpi) helps a lot. Keep in mind that the resolution of the eye is on the order of 100 dpi. You have to start using a magnifying glass or zooming to see the higher resolution (useful in some cases, but not usually). The intermediate step in creating a PDF is to print to a PS (you do not see this step normally), the step that often causes the problem with memory (you are limited to the size of free memory allocated to the TEMP folder -- not the free memory on your hard drive). Hope that explains some of the limitations.

  • Recommended settings for encoding a 20 min flv file?

    can anyone recommend which settings i should use for the
    attributes below for a 20 minute video for the web (just individual
    people talking, no complex animation or graphics) that has a width
    of 379 pixels and a height of 284 pixels?
    i am looking for the best quality possible for a streaming
    web video that will not take long to load over standard home dsl
    lines.
    - for video codec should i use sorenson spark or on2 vp6?
    - what should the max data rate be for kilobits per second?
    any advice or pointers would be appreciated!

    I have tried sorenson spark, it did it's job. As far as I
    remember there were 3 quality settings, the low and medium seem to
    be most appropriate. Testing will give you the best option for your
    individual case.

  • What are the recommended settings for multiple iPhones and iPads in the same family?  I don't want my family members contacts in mine...or them receiving texts that are intended just for me.  Help!

    I don't want my wife's or children's contact information in my contacts during syncing...or them receiving texts that are intended or me.  Can someone please tell me how they handle multiple family members settings in regard to emails, iCloud, and iTunes?  Does each phone have a separate computer login, iTunes account or iCloud accounts?  Help!

    Yes, set them up with their own Apple IDs:
    http://appleid.apple.com
    An Apple ID may have been entered in the following places:
    Settings > iCloud > Account
    Settings > Messages > Send & Receive
    Settings > FaceTime
    Settings > iTunes & App Stores

  • What are the correct settings for my wireless-n router?

    I was just upgraded at home with a Huawei HG8245 Fiber Optic Wireless-N router.  The default Setting is:
    WPA/WPA2 Pre-Share, TKIP/AES, Auto Channel and 20Mhz Channel Width.
    I cannot surf past 10 feet from the router.  I switched the Security to TKIP, and it goes to Wireless-G and I can surf all around my apartment.  I did AES only, goes back to Wireless-N, and again the 10 feet issue.  Selected WPA2 only...same thing.
    Any ideas or solutions?
    Paul

    I have opened ports 80, 443,and 4125 to PCP.  The  router address is http://192.168.1.1, my address is 221.40.138.170.
    Thank you.

  • UWF recommended settings

    Hi,
    what are the recommended settings for a x86 system with 2/4GB RAM, an industrial SSD with 2 partitions D: (Protected by UWF) , D: unprotected for data ?
    The SSD has hardware protection against power loss.
    Now I have UWF on RAM (512 MB @2GB, 1024 MB @4GB) and no page file.
    This is the configuration with the minimal write access to disk.
    But after 2 ... 4 days UWF and Windows goes out of memory.
    What are the recommended settings of UWF to get a longer up time?
    UWF with disk overlay (at C:) or RAM overlay?
    Additional page file?
    If pagefile: On protected C: or unprotected D: ?
    If the pagefile is on C:, have I exclude it manually or it is always excluded by UWF?
    I assume, that the SSD protection against powerloss is working and the additional write access of disk overlay / page file will not damage the file system during power loss. And actual SSD have
    enough write cycles for some years.
    Peter

    You responded to the memory leak issue with UWF -
    https://social.msdn.microsoft.com/Forums/en-US/a048c499-6955-40ac-914c-dd06b85ea3d6/uwf-every-day-out-of-memory?forum=wes8
    You can try a page file on C, but MS needs to fix UWF.
    www.annabooks.com / www.seanliming.com / Book Author - Pro Guide to WE8S, Pro Guide to WES 7, Pro Guide to POS for .NET

  • WRT54GP2 security settings for HP Ipaq 111 handheld

    I have a home wireless network, using a Linksys WRT54GP2 wireless router. I'm trying to secure the network, with has 3 wireless systems, my home PC, a notebook, and my Ipaq 111. I can get my home PC and the notebook to work when I setup the WRT54GP2 router using Authentication: WPA-Pre-Shared Key and Data Encryption: TKIP, but the Ipaq 111 will not even see the router with any security setting. When the security settings for the Linksys Wireless Router WRT54GP2 are disabled the Ipaq 111 sees the router and connects to the internet.
    The HP Ipaq 111 handheld has the following security options: Authentication: Open, Shared, WPA, WPA-PSK, WPA2, WPA2-PSK. Data Encryption: Disabled, WEP, TKIP, AES.
    Does anyone have any ideas of how to get the Ipaq 111 to work on the secured Linksys WRT54GP2 router?
    Thanks for any help.
    John

    On your Router setup page, Click on the Wireless tab and below change the Wireless Channel to 11-2.462GHz and click on Save Settings, then click on the Sub tab Advanced Wireless Settings and below Change the Beacon Interval to 75,Change the Fragmentation Threshold to 2304,Change the RTS Threshold to 2304 and Click on Save Settings...
    Now see if you can locate your Wireless Network and attempt to connect to it on your Ipaq.

  • WRT54GP2 security settings for a HP Ipaq 111 handheld

    I have a home wireless network, using a Linksys WRT54GP2 wireless router. I'm trying to secure the network, with has 3 wireless systems, my home PC, a notebook, and my Ipaq 111. I can get my home PC and the notebook to work when I setup the WRT54GP2 router using Authentication: WPA-Pre-Shared Key and Data Encryption: TKIP, but the Ipaq 111 will not even see the router with any security setting. When the security settings for the Linksys Wireless Router WRT54GP2 are disabled the Ipaq 111 sees the router and connects to the internet.
    The HP Ipaq 111 handheld has the following security options: Authentication: Open, Shared, WPA, WPA-PSK, WPA2, WPA2-PSK. Data Encryption: Disabled, WEP, TKIP, AES.
    Does anyone have any ideas of how to get the Ipaq 111 to work on the secured Linksys WRT54GP2 router?
    Thanks for any help.
    John

    What is the model no of the Wireless Adapter you are using on the HP laptop...?
    Have you tried updating the driver for the adapter...?
    Try to adjust the wireless settings on the router...Open the setup page and  Under the Wireless tab,Change the Network Mode to mixed...Keep the Wireless Channel on 11-2.467GHz and click on save settings...Under the Advanced Wireless Settings, Change the Beacon Interval to 50,Change the Fragmentation Threshold to 2304,Change the RTS Threshold to 2304 and Click on Save Settings...

  • Services for WBS - Links on the WebDynpro don't work

    Hi SDN,
    please, can anyone help me with the links for WBS Service on the Account Assignment for Projects ?
    I had no success on searching for this answer on the SDN.
    The web Links on the screen are not set up for the services.
    1 - Open a Project in cProjects
    2 - Select Accounting tab
    3 - Click on any Account Assignment Element
    4 - On "Services for WBS" screen, click on any Service.
    An ITS (SAP GUI for HTML) window should open, with relative transaction for the selected WBS Service.
    However, nothing happens.
    We have an environmet where it works, and the link points to the following address:
    http://server.company.domain:8000/sap/bc/gui/sap/its/webgui/!?MESSAGESERVER=SERVER.COMPANY.DOMAIN&PROJ-PSPID=PM/6728&PRPS-POSID=PM/6728&OKCODE=UCCOST&~TRANSACTION=CJ9ECP&sap-client=400&sap-language=EN
    But on the environment where it's not working, there is only this in the reference of the link:
    https:///scripts/wgate/webguiPROJ-PSPID=PM/101&PRPS-POSID=PM/101&OKCODE=UCCOST&TRANSACTION=CJ9ECP&=&=
    Please, where can I configure these links, so that the new window is called pointing to the HTML SAP GUI, when a Service is selected ?
    Many thanks,
    Fabio

    Hi Fabio,
    Please check the Service SAP GUI for HTML is active for the environment in which it ia not working, Tcode to access the service is : SICF.
    Please take help of your basis person for the same.
    Secondly,
    There are certain customizing settings also to be done.
    1) In IMG activity : Make settings for calling an SAP transaction under Object link in SAP system, for activity :Alias for the Web Server of an SAP Transaction, enter the Web server Alias and assign Web server address to your Alias.
    2) In IMG activity, make settings for the linked SAP Objects under Object link in SAP system, select  0WBSELEMENT object and in its details view check in Destination field the RFC is defined or not (If your cProjects and R/3 are on same system then your RFC will be NONE), and for the field Web server defiine Alian for your web server which you created in previous step.
    3) For IMG activity Define Object Links for Accounting Integration under Accounting Integration, for object type 0FIN_INT_ERP_PS, define destination and Web server as mentioend in point 2.
    Hope this will resolve your issue.
    Reagrds,
    Niraj
    Edited by: Niraj Sikligar on Mar 18, 2010 5:34 PM

  • SQL DB Settings for system 9 BI Plus Stack

    Does anyone have the recommended settings for the sql server for the BI Plus repositories (i.e. for SS, WKSPCE, FR, WA, AAS, IR, PLN etc)?
    We keep running into issues where our SQL server runs out of disk space after about 4 months of regular usage. I think there are some no brainer settings we missed b/c we installed SQL with all default settings and then never addressed it until it was too late.
    Thanks.
    Keith

    SQL Server's default setting is to auto allocate space. Unfortunately, if too much data is loaded at once, then the auto allocation churns and it looks like the database is full.
    If you leave SQL Server to its own devices it figures this out.
    Are you backing your databases up? If you back it up a checkpoint is created and the transaction logs are cleared free more space. A simple Maintenance Plan might take case of the 4 month issue.
    There are no recommended repository sizes that I can find. I think most are less than 100Mb.
    Brian Chow

  • Settings for exporting MPEG for Vista MCE

    Hi
    I'm new to video editing and I am currently playing with the Premiere Elements trial before I decide to buy or not.
    My video is imported from a Canon HF100 in AVCHD format.
    Can someone please post the settings I should use on the first screen when I create my project. I'm just setting it to 1080i AVCHD which seems correct.
    Also I'd like recommended settings for exporting my final movie. I'd like to export onto DVD and some file type that is suitable for viewing using Vista MCE (MPEG I assume)
    I dont mind waiting for the rendering if that means better quality. Should I just whack everything up to max quality? Or are there better ways to export?
    Vista MCE is viewed on a Pioneer 42" plasma if that makes any difference.
    My PC seems powerful enough as I've rendered a couple short files already.
    Thanks
    Alan

    Alan,
    I *believe* that you have the proper Project Preset. As I do not do AVCHD work, Paul_LS, or Steve will have to verify that 100%.
    Now, for your Export/Delivery there are some considerations:
    1.) If you edit your AVCHD footage in it's native state, the ultimate delivery would be BD for play on your 42" plasma TV. You would Burn the BD with the proper BD settings. Encoding will be handled there. (see below)
    2.) If you deliver on DVD-Video, it will be down-converted to a DVD-compliant MPEG-2. One option that this gives you is having all of your editing done in HD, should you decide to later go to BD.
    3.) Another possibility would be to choose a Preset for SD DVD-spec. material and let your camera do the down-converting to SD. This will speed up both the editing and the Burning to DVD. However, if you later decide to do an HD version of your Project, you'll be looking at starting pretty much from scratch and doing an HD Capture.
    4.) In your particular delivery scheme, you will be using a software player, instead of a physical DVD, or BD. It is the file, and not a physical disc, that you will be using. That is about the only difference.
    Unfortunately, I do not know which player/players come with Vista MCE. I would *assume* that it/they can easily handle a DVD-spec. MPEG-2 file (the same as Burned to a physical DVD disc, but without the pure DVD-Video structure - just the raw file, with no VOB, VIDEO_TS folder etc. That would allow the movie to play. However, the software player can *probably* also handle the full DVD-Video structure and allow for navigation, just like on a DVD hardware player.
    I would *assume* that this OS might well have BD equivilent capabilities, as well. There, you would be Exporting to an MPEG-4 AVC or VC-1 format for HD playback. This would keep your delivery in HD (like your footage) and allow the best possible image in playback.
    Those are just some rough thoughts. Others will have some very specific suggestions for your particular editing and playback schemes.
    Hunt

  • Settings for streaming to XBox 360 over Connect360

    Anyone have recommended settings for transcoding/encoding to stream on XBox 360 from Mac via Connect360?

    I just did a bunch of encodes, tried all kinds of settings.
    I found that both MP4 and ipod/iphone 640x480 worked well.
    I haven't tried any HD settings yet, but that will come.
    It was pretty cool. I took my son's football game on DV, dumped it into FCP, encoded it to a QT Movie, and played it down in the basement on the big screen. (Coaches Film Session)
    The only thing that didn't work as well as I would like is that the chapters that I set up weren't as accurate as I would like (I set a chapter marker at the beginning of each play. If I remember correctly, i may need to force an i frame with each chapter marker.)
    Connect 360 Rocks imho. It was very frustrating for video until this last xbox software upgrade, but now it will play both mp4 and h.264.
    If you run into any trouble, just export a short clip from FCP, then use compressor and try all kinds of settings. Then see which one works for your desired quality.
    Like I said, apple devices, ipod/iphone 640x480 worked great. Looked awesome on a 1080p projector at 120" diag!
    Ken

  • Need web intelligence server memory threshold settings for SAP BO BI XI4.0

    Hi,
    We have found that WIreportserver.exe process taking high memory in our BO systems. We are in SAP Business objects XI 4.0 SP 07 Patch 2 version now.
    We have found that the Web intelligence server memory threshold settings to be changed in case of these issues.
    But there are no documents that says about the recommended settings for SAP BO BI XI 4.0 version.
    The XI 3.1 recommendations(SAP Note:1544103 ) can not be taken as its a 32bit server and the X14.0 is a 64 bit one.
    Please let me know the recommended settings for web intelligence server memory threshold settings  SAP BO BI XI 4.0 version or any SAP note that says about it.
    Any suggestions/ recommendations are welcomed that will fix the issue.
    Thanks in advance.
    Regards,
    Sithara.S

    Hi Henry,
    PFB the answers inline:
    which setting are you referring to?
    There is settings for 'Web Intelligence Server Memory Threshold Settings'  where we will set values for  memory max threshold,memory lower threshold and memory upper threshold values .You can check the SAP note 1544103 which says the settings , but its applicable for 3.1.
    and which ones have you changed already?
    We have not done any changes in settings yet. We are actually searching for the recommended values.
    what errors / symptom are you trying to avoid?
    We are facing  issue in  'WIreportserver.exe' occupying 100% memory.
    Please suggest and let me know if any other information is needed.
    Regards,
    Sithara S

Maybe you are looking for