Recommended Third Party Archive and Purging Software for Oracle Database (Oracle CC&B)

Hi,
We are currently exploring third party archive and purging software for Oracle Database specifically used by an Oracle Customer Care and Billing implementation. Our current data is growing that we think archiving and purging is a now a viable option. Thanks.
Regards,
Dennis

According to the fine Oracle® Utilities Application Framework Administration Guide Chapter 17, "Archiving and Purging" is readily available to CC&B.

Similar Messages

  • Third-Party Licensing and Activation Toolkit for Labview 8.5

    There is any Third-Party Licensing and Activation Toolkit for Labview 8.5 as LV2010. PLS help..
    Solved!
    Go to Solution.

    I know what you are asking and in the other thread, you were told it was for 2010 only. There is some support for 2009 but not for your old version. Go with the dongle suggested or upgrade your version of LabVIEW.

  • Third Party Wall and Car Chargers for ZV

    Hi all. I was wondering if anyone has had any experience with the third-party wall and car chargers that are available on Ebay? I just purchased a Vision: M yesterday and was wondering if I should purchase a bundle pack off of Ebay with a case, chargers, TV cables, and sync cable? Or if I should only purchase the skins off Ebay and get a genuine Creative charger? I love the unit already (I have been a Creative customer for 6 years) but fi've hours via USB is too long a charge cycle for me...
    Any help is greatly appreciated.
    Regards,
    Fenian

    encase makes a combo unit. can be used with USB port, with cigar lighter in vehicle, or 120V wall plug. Quality stuff!

  • Third party ISP and SMTP settings for outlook

    HI,
    we've recently sifgned with BThome because the connections speed where we live is much better than it was with demon. however...
    I can't semm to make a configuration for my outgoing email settings. i'm receivin my incoming messages from a third party POP account related to my website. there is no problem with my incoming mail, despite what the ncie indian lady at the helpline accused me of. with demon it was simple: you just changed the smtp setting to  post.demon.co.uk however there doesn't seem to be an easy solution for that with BT. they insist i take on an btinternet email account. i do not want to do that.
    is there anyone with a similar issue and/or solution, that would be greatly appreciated.
    many thanki, michael

    MAF wrote:
    HI,
    we've recently sifgned with BThome because the connections speed where we live is much better than it was with demon. however...
    I can't semm to make a configuration for my outgoing email settings. i'm receivin my incoming messages from a third party POP account related to my website. there is no problem with my incoming mail, despite what the ncie indian lady at the helpline accused me of. with demon it was simple: you just changed the smtp setting to  post.demon.co.uk however there doesn't seem to be an easy solution for that with BT. they insist i take on an btinternet email account. i do not want to do that.
    is there anyone with a similar issue and/or solution, that would be greatly appreciated.
    many thanki, michael
    Hi Michael.
    In order to send emails via BT you need to alter the smtp server to mail.btinternet.com - however this may also need other things to be set, i.e. smtp authentication.
    You may need to use something called address verification (see my shortcuts section 0e).
    Now, with a 3rd party email provider - you should normally be able to use their smtp server (unless they don't have one), and maybe need to alter the port to say perhaps 587 rather than 25.
    As Ian said, you will have a btinternet email address - either you chose one on joining or you were allocated one, typically based on your name. This will be needed for address verification.
    There are a couple of other ways to do it, e.g. use live.com from MS, or a Gmail verification, but the latter typically shows strange receipt details for some people showing the actual Gmail address as well.
    http://www.andyweb.co.uk/shortcuts
    http://www.andyweb.co.uk/pictures

  • Data archival and purging for OLTP database

    Hi All,
    Need your suggestion regarding data archival and purging solution for OLTP db.
    currently, we are planning to generate flat files from table..before purging the inactive data and move them to tapes/disks for archiving then purge the data from system. we have many retention requirements and conditions before archival of data. so partition alone is not sufficient.
    Is there any better approach for archival and purging other than this flat file approach..
    thank you.
    regards,
    vara

    user11261773 wrote:
    Hi All,
    Need your suggestion regarding data archival and purging solution for OLTP db.
    currently, we are planning to generate flat files from table..before purging the inactive data and move them to tapes/disks for archiving then purge the data from system. we have many retention requirements and conditions before archival of data. so partition alone is not sufficient.
    Is there any better approach for archival and purging other than this flat file approach..
    thank you.
    regards,
    varaFBDA is the better option option .Check the below link :
    http://www.oracle.com/pls/db111/search?remark=quick_search&word=flashback+data+archive
    Good luck
    --neeraj                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

  • Archival and Purge for Workflow Approvals

    I am looking for a way to archive at least 10 years worth of Workflow Approvals for Oracle R12 EBS Financials environment. I cannot find any good notes on My Oracle Support or whitepapers other than a basic paper on general archival and purge programs for Oracle R12 EBS. Any tips on how to setup an archival process for Oracle R12 EBS Workflow approvals would be appreciated.
    Thanks
    Ben

    1. SHould have automatic schedules that run to purge/archivePlease see this link -- https://forums.oracle.com/forums/search.jspa?threadID=&q=data+AND+archival+AND+tool&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    2. Keep log of data that is archived/PurgedPlease see this link -- https://forums.oracle.com/forums/search.jspa?threadID=&q=data+AND+archival&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    Thanks,
    Hussein

  • Do I need antivirus and firewall software for my MacBook Pro?

    New to the world of Mac. Just purchased MacBook Pro notebook. Will be using for basic personal use (internet browsing, sending and receiving e-mails, MySpace activity, and using Final Cut Express for creating videos). Do I need to purchase and install third party antivirus and firewall software? I see some information in the discussion forum that this is not really necessary with Mac/Leopard OS X.
    Also tried to search Apple site to see if Apple "recommended" certain antivirus software, but could not find anything specific in that regard.
    If antivirus software is recommended for use, would like to hear what other users recommend for purchase. Thanks

    Krwest
    Welcome to the world of Mac - I hope you will like it here
    I came from the Windows world some years ago and have never regretted the switch - on the contrary. I love the ease of use, stability and security of OS X.
    There are a lot of opinions regarding whether you should use antivirus and/or third party firewall on a Mac.
    I was used to having all the security I could, so to speak, on my Windows machines, and with good reason - my antivirus program stopped "nasties" on more than one occasion.
    With OS X I have never quite felt the need to install antivirus. One reason for this is that there are very few, if any, viruses or other "nasties" in the wild for OS X. Another is that OS X works differently from Windows and is less vulnerable (but not invulnerable!).
    Regarding firewall, I have found OS X own firewall to be sufficient since I also have a router with built in firewall on my network.
    That said, there are those who suggest that we should install an antivirus program if most of those we communicate with run Windows. This is in order to avoid unintentionally spreading viruses to them, viruses that may not affect us but might affect a Windows machine.
    In addition, OS X in not invulnerable, and there are those who think Apple might be more open to peoples interest in writing "nasties" for OS X if the market shares increase enough. Then again - it is all speculation and no one knows what the future brings.
    I am very security conscious, but would tend to agree with those who suggest that a third party firewall and an antivirus program is not strictly necessary.
    Should you still want to have added security, I would suggest antivirus and stick to OS X own firewall.
    Two excellent antivirus programs for OS X are ClamAVX (free) and Intego VirusBarrier X5 (pay) (Intego also has firewall and anti-spam solutions). They put little strain on the computer and are considered among the best.
    http://www.clamxav.com/
    http://www.intego.com/
    All the best,
    Espen

  • I renewed my subscription for a third party app and was charged TWICE! $38 bux a pop. How do I go about getting one of the charges refunded?

    I renewed my subscription for a third party app and was charged TWICE! $38 bux a pop. How do I go about getting one of the charges refunded?C

    You can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • Recommended antivirus and antimalware software for MaC

    My computer is hanging up way to frequently and I think it is either a virus or lots of malware operating in the background.  Does anyone know of a good Antivirus and Antimalware software for the MacBook Pro.  mine is 4 years old and just updated the operating systerm OSX 10.8.5.
    thanks Kristinafromtacoma

    I agree that there would not be a virus causing the slow down, hackers can't be bothered to create a virus for a Mac, it is really hard to do and Apple only have 5% of the market/users.
    Its more likely age.
    Suggestions
    -Full backup of your data(time machine) and then an erase and reinstall of the operating system. Then only return applications that you use and files that you need.
    -Add more RAM, this will speed up your applications and startup time etc.
    -Your hard drive may be reaching the end of its life, so replace it if you can.
    Apple stores will do the erase and install of the operating system for you (free) and replace  the hard drive if need be(not free). They are also good for a tune up(free). Are you close to one?
    What are the specs of your computer (about my mac) serial number is better. This will tell me if you can get more RAM.

  • How to Archive and Purge SLA data?

    We are looking for a solution to archive and purge SLA tables. I have opened an SR with Oracle and they suggested to work with third party who specialized in archiving and purging data. I would like to see if any of the clients have developed a custom solution for this and if so what is the criteria that has been used for this
    Thanks in advance,
    Prathibha

    Hi,
    Thanks for the information.
    But this traditional way of doing is archiving is for maintenance and backup operations.
    We want to have this process online, without taking db offline. In this case will this approach work?
    In our case, the rules can be like -
    1. For table 'A', if rows exceed 10Million, then start archiving of the data for that table.
    2. For table 'B', if data is older than 6 motnhs start archiving of the data for that table.
    3. Archiving should be on for 15 minutes only after that should pause, and should resume whenever user wants to resume.
    4. Archiving should start on specified days only... ETC...

  • Third party apps and peripherals to blame?

    I am wondering what applications and external add-ons are working and which ones are not?
    It appears to me a lot of people are having problems with external hard drives and previously installed applications.
    I did a clean install and have only added Apple programs so far (iLife, iWork). I am hesitant to add any other programs for fear of messing up my install, or worse... my Macbook.
    The big question is who did the research and development (lack of) on Leopard.
    It is beginning to look more and more like Apple focused all it's attention on perfecting the OS and left all the responsibilities for software compatibility to the third party software developers.
    Bad idea. Companies that make software for Apple computers are catering to a far smaller market than our PC brothers, which leads me to believe they do not have the resources to insure 100% compatibility. Apple should have anticipated this and performed more testing.
    When I installed Roxio Toast 7 I could not burn a disk image. Shortly thereafter my superdrive stopped working completely. I found out from other posts, that you need version 8, or an older version of 7 to get it to work. On Roxio's website there is no mention of this at all. No a peep.
    Apple had a few years to check compatibility and work software engineers to make sure their products worked on Leopard.
    I further confirmed my suspicions when I visited the apple store today. I was there because my superdrive stopped working. After I installed Leopard and started to re-install my applications (Office, Toast), the drive quit accepting disks. They replaced the drive while I was at the store. By the way they said it was a coincidence. Mmmm.
    While I waited (Fantastic customer support by the way, even on a Sunday) I noticed all the computers in the store happily running Leopard without a hitch. I looked deeper and found little or no third party software installed. External hard drives and cameras appeared to be working fine, but with no added software.
    My suggestion is be real careful with what you install.
    To Apple... Pleeeaaase test your products more thoroughly before sending them out the door. It may not be your responsibility, but if there are known issues then they should be disclosed.
    On the other hand how sad it that... Imagine- "To install our software you must take the weekend off, back up all your data, delete all third party apps, and hope you hardware works with our new OS. Some of you will be lucky and others will not. Meeting our system requirements does not really guarantee anything... Good luck".

    It seems they deleted my post from discussions. Thanks.

  • Third party sale and stockable item

    Hi all , We have some products . For example "A " . We buy it from one vendor and maintain its stock and sale it as and when order comes . Same product when there is demand we sale it by third party process instead of holding the stocks we instruct vendor to send the delivery directly to customer . Process is similar to third party process in SAP . For such material how can I make material master.
    1>> which Material type I have to maintain on first screen ?
    2>> what will be the other configuration or values in other fields of master

    Hi,
    Please search for the SAP building blocks for Third party sale with Shipping and Third party sale W/O shipping
    U can use FERT as material type only
    regards,
    sujit

  • Third-party keyboard and mouse

    I’m buying a “third-party USB keyboard and mouse”, as quoted in the FAQ. I cannot afford the original keyboard and mouse because here in Brazil they’re extremely expansive. But some of these third-party sets have an indication: “for both windows and MAC OS”, and some don’t. Does that mean that the ones without the indication will not work? Or it only means that these with the indication have been projected more properly? The equivalent keys quoted in the FAQ are not rare, on the contrary, they exist in any keyboard – the one with the windows sign (equivalent to the apple sign) and the ALT command, equivalent to the optinons, right? Is there any other special care I should have when buying them?

    "But some of these third-party sets have an indication: “for both windows and MAC OS”, and some don’t. Does that mean that the ones without the indication will not work?"
    It means that the ones with the indication that it is "for both windows and Mac OS" will work on both Windows and Mac but will generally have the Windows style keyboard.
    About the time I ordered my Mini, I ordered one of the Windows/Mac compatible keyboards from one of the major online stores. I was concentrating on the fact that the KB was compatible with the Mac and not being aware of the keys being Windows style. It's a nice KB but I'm sorry that I didn't buy a dedicated Mac KB because I keep forgetting which Windows key relates to which Mac key. It's not a major hassle but an annoying inconvenience when referring to a Mac manual and having to translate Mac keyboard instructions to my Windows layout KB.

  • Third party sales and individual purchase order MIGO DIFFERENCE?

    Hi experts,
                     any difference between third party sales and individual purchase orders goods receipt(MIGO). What's the stock levels chages after goods receipt in both cases? How the system knows that its third party migo and individual purchase order MIGO? Can anybody clarify my question?
    regards,
    raju

    Hi
    In third party you will not be able to create automatic PO
    The schedule line category CS settings in VOV6 order type NB, MM item category 5 and account assignment category settings as X and in VOV7 for TAS create automatic PO ticked will ensure PR creation only and not PO
    As suggested by the other friend you need to run t code ME59N or ME59  for automatic PO creation but certain condition to be met
    1) In the Purchasing View of the material master data, the "Autom. PO" field must be clicked;
    2) In the Purchasing View of the Vendor Master Data, the "Automatic Purchase Order" field must be clicked;
    3) The Outline Agreement or Purchasing Info Record shall be maintained which will allow the automatic copying of unit price and other conditions into PO;
    4) The Source List shall be maintained for the nominated vendor which was shown in either the Outline Agreement or Purchasing Info Record.
    You have to run ME59N transaction  manually or schedule this as  a background job
    Regards
    Raja

  • Third Party Items and Receiving Calendar

    Hi Gurus,
    I have a question about third-party items and receiving hours.  I've searched this forum, OSS, and other sources, but I'm stumped.
    First some background: our company ships product from stock and third-party items.  For each customer we maintain a single unloading point, and the receiving hours for this unloading point are the days the customer is open. 
    For stock items, we have transportation scheduling switched on.  SAP determines the delivery date for these items based on the route and the receiving calendar. 
    For example, assume an order is placed on Monday 9/24, we are using a 1-day route, and the customer is only open on Fridays.  The system will schedule the delivery for Friday 9/28 - based on the customer's receiving calendar.
    For third-party items we have a committed 1-day delivery time from our vendors.  My problem is that in this case SAP does NOT consider the receiving calendar.  For example, if an order is placed on Monday 9/24 and the customer is only open on Fridays, the system will schedule delivery for Tuesday 9/25.
    This is a big issue for us because we drop-ship refrigerated product to the customer.  If the product arrives on a day the customer isn't open, it will be damaged.
    Does anyone know how to get SAP to consider the customer's receiving calendar for third-party items?
    Thanks
    Rick

    Hi Navneetha,
    Thanks for d reply.
    I hv checked d mentioned tables and Itm Categories nothing is +ve there. All 3 itms hv TAS itm category. Also I agree with ur MIRO statement.
    I found one thing which might b d cause plz check.
    As we knw dat we cant change the schedule ln date and quantity once the Pur. Requisition created. and we cant make changes in sales order itm line if the PO is created for that Pur. Requisition. Bcoz afteward the PO wont be updating  the Pur Requsition and sales order automatically.
    But here the schedule line date at d schedl ln category for itm 2 is changed by a certain Batch job after the PO cration.
    Therefore I think this wd b d reason that the item line 2nd is not getting updated in sales order from the PO and looks open.
    The change of schedule line dates is not maintained in the PO manually ever.
    So would it b d reason for the inconsistent doc flow updates and 2nd item being open as not invoiced yet?
    regards,
    Sandesh

Maybe you are looking for

  • CCMS Monitoring - csmreg user settings

    Hi Y'all, We are having problems with our alerts triggering. All the essential settings according to alert setup is done. 1.Alert category set in ALRTCATDEF 2.Rules set up 3.SXMSALERT_PROCESS_DATA_GET has been scheduled as a back ground job. 4.RSALER

  • Serialized item stock discrepency

    Hi, For a material in MMBE it shows stock has 10 nos. If I see it in IQ09 serial number report for the same article it shows 11. How it can be possible Pls advise

  • Unable to create a new instance in Hyperion Conf Utility

    Hi, I have installed Planning 9.3.1 on XP Prof. Everything is configured correctly except for the instance. I try to create a new instance and system gives out the following - "System failure : Error while retrieving xml from database" I have re-inst

  • Disable imessage without an iPhone

    Hey all, my iPhone recently broke and until i get a new phone i'm on my old brick nokia, however people keep sending me imessages instead of normal text, which is obviously annoying as i dont get them to my phone.. I have imessage on my macbook but i

  • Where can i find examples for Adobe Interactive Form

    Hi, i am new to this forum and to Interactive Forms.Currently working on Interactive forms in WebDynpro for java...i wanted to develop some example application using developer studio but iam not knowing how to start and do, i went ahead and created a