Recommended Video Cards for K8MM-V

Hello ALL......Looking for any advice on choosing a AGP 8X that plays nicely with this MoBo.

I like these two,
http://www.newegg.com/Product/Product.aspx?Item=N82E16814102085
http://www.newegg.com/Product/Product.aspx?Item=N82E16814131042
Good Luck
Bretware

Similar Messages

Can anyone recommend a video card for a stock Acer Aspire X AXC-605-UR11?

Can anyone recommend a video card for an Acer Aspire X AXC-605-UR11 with stock 220 watt Power Supply?

Hi Shaun, here's some video card choices, but check which Mac Pro they work on, might even ask OWC for Motion details...
http://eshop.macsales.com/Search/Search.cfm?Ntk=Primary&Ns=P_Popularity|1&Ne=5000&N=7418&Ntt=video+cards

Which video card for Aperture and dual monitors?

I have a G5 dual 2.0 with a GeForce FX 5200 video card that is driving one 23" Cinema display. I need to upgrade my card per the specs to run Aperture. I have also been thinking of getting a second 23" display. Can someone recommend the best video card for me. I know very little about video cards and have been reading a lot this morning. Thanks,
Dave

Hi Dave;
No. PCIx and PCIe or PCI Express are not the same thing.
PCIx is an extended or slight sped up version of PCI. While PCIe is a switched bus structure instead.
Hence they are not the same. That is what all of the big news is about Apple has made the leap over to PCI Express.
Allan

Best Video Card for non 3d/compositing work in Premiere CS4?

Hi all, I'm looking to optimize my system where I can to speed up the editing process. I edit 1080p footage from the Canon 5D MKII (h.264 MOV files)using half-res h.264 proxies, but CS4 seems to hang a lot in the timeline view and clips just disappear and instead show green. I'm switching to half-res MPEG-2 (.m2v) proxies now and so far that problem seems to have gone away (still testing), but when timeline display quality is at "High Quality" (vs. automatic) there's still some chop during slow pans (not seen with "Automatic" or "Draft Quality").
Anyway, I'm looking for the weakest point in my system and suspect the video card. My system is an 2.66 i7 processor, 6GB 1333 ram, 1x160GB sata II HD (OS/Apps), 3x1TB SATA II RAID 0 (paging file, data), and an $80 ATI 4650 512 MB video card running Vista 64.
So all that said, what's the best general graphics card for editing HD video in Premiere CS4? I don't care about 3d or compositing at this stage, just basic editing of unrendered (timeline playback) HD video, maybe sometimes 1-3 HD layers, some basic color correction effects (b+w, contrast, etc), dissolves, text overlay, some clip speed manipulation.
Many seem to recommend the Nvidia quadro cards, but I haven't found any information to suggest they help with anything other than 3D/compositing, which I don't need (and therefore don't need to pay the premium).
There's also the Nvidia CX card, but it's main feature is touted as encoding h.264, whereas I could care less about that and ideally need decoding of h.264 in the timeline to be better. I haven't seen any great reviews on this card of heard of average user testimonials, probably because it's $2k and it mainly marketed as "zoom more fluidly in photoshop, export h.264 4x faster", which seem like minor issues vs. "better realtime playback of HD video".
I sort of rambled, but if any informed CS4 users can help answer the question regarding the best video card for general CS4 editing use (not 3d/compositing stuff) I'd love to get more insight.

So in Media Encoder CS4, I tried encoding one of the clips that plays back the least smooth in the Premiere timeline (a slow pan across intricate patterns on a sand dune in death valley) to the following:
Format: P2 Movie, Preset: DVCPRO HD 720P 30
(this was the only format in media encoder that mentions DVCPRO HD)
I noticed when trying to customize the setting, that there is no 30 fps option, just 23.976, 29.97, and 59.94. I just went with 29.97 as that was the closest to the 30 fps of the source MK II footage. The width and height were also unajustable at 960x720 for the DVCPRO HD format.
Playing the output in the timeline view of Premiere was comparable in smoothness to the m2v file. I looked at my resource monitor during playback looking for bottlenecks, and the CPU does seem to spike at 100% initially when playing this clip back. I reverted to the m2v version and also saw the same CPU spike. I also reverted back to the down-res'd mp4 version, same spike. Moving display quality down to draft does allow for smooth playback here.
So I guess there's something about this clip that is CPU intensive to play back in the timeline in any of these formats. The original 1080p version plays back perfectly in both quicktime and VLC player.
Anyway, for now I think I'm content with using the m2v proxies as a big chunk of the clips are fairly smooth, and using a reduced quality display mode for clips that don't play as smoothly is accpeptable for now. At least so far I'm not seeing the hanging/video not displaying (and instead showing a green screen) that I was with the mp4 proxies.
If anyone has any other suggestions as to how to get smoother timeline playback for these proxies (or the original h.264 .MOV files), however, whether it be a hardware upgrade (e.g. better video card) or a different proxy codec, I'd love to hear them and give it a shot.

What is a recommended Graphics card for G4MDD running tiger and sometimes..

What is a recommended Graphics card for G4MDD running tiger and sometimes 9.2.2
I really need to have both in accelerated mode, looking at my stats I currently have 9000 PRO with 64mb ram... don't need it for games but high end graphics applications currently using Starta Pro 2.5.3 on 9.2.2 which for my current purposes is afficient

The 9600 runs like crap in OS 9.2.2 with any ATI software you can find because ATI never wrote OS 9 drivers for the 9600. OS 9 ATI software does not recognize the card. You get a basic 2D monitor output that is soft, dull, slightly off-color, and cannot be enhanced with the Monitor's Control Panel calibration utility.
If you spend any amount of time in OS 9.2.2 or you want to use OS 9.2.2 for any of your old games (even 2-D video clip type games), don't get the 9600.
I have a 9600 installed in my MDD G4 and now have an original Radeon for Mac PCI video card installed as well. When I want to use any of my OS 9 games, I move the DVI cable from my LCD monitor over to the old Radeon card and restart.

Dual Monitor video cards for HP Pro 3400

I am looking to add a 2nd monitor to my HP Pro 3400 MT and want to make sure I get a video card that will not have any compatibility issues. I'm not doing any gaming so I don't think I need anything super fancy and I would prefer not to have to upgrade the power supply.
So my questions are:
Is the HP Pro 3400 MT compatible witha PCI Express 3.0 card? 2.1 ?
How much power draw from the video card would require me to upgrade the power supply (my PC is stock, no added peripherals). Is there a way for me to determine how much is being currently (no pun intended) drawn?
Are there any drawbacks to usnig the built-in video card for 1 monitor and a new, single-ouput card for the other (vs a dual-output card) ?
Anything else I need to consider when deciding on a new video card?
Thanks.

Hi,
You might get better assistance on the HP Enterprise Business Forum since you have a business class PC.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

ATI 5770 1GB Video Card For Mac Pro dvi hdmi cable

I am sending video signal over a 50FT HDMI To DVI from my Mac Pro (3,1) via ATI 5770 1GB Video Card For Mac Pro (5.0 GT/s) (181062917108) and I cannot get a constant signal to my TV. The signal stays on for a few seconds or several hours or my TV (Samsung) says there is no signal or I get just a gray static screen.
I never had a problem before with my previous video card the 512MB nVidia GeForce 8800GT with a 25ft long cable. Any ideas people?

A cable of about 5 meters (16 ft) can be manufactured to Category 1 specifications easily and inexpensively by using 28 AWG (0.081 mm²) conductors.[114] With better quality construction and materials, including 24 AWG (0.205 mm²) conductors, an HDMI cable can reach lengths of up to 15 meters (49 ft).[114]
from: http://en.wikipedia.org/wiki/HDMI
You may need a higher-quality cable or a lower resolution for your display to make this work without an HDMI Repeater.

Can I replace an ATI RADEON 9800 PRO-(256MB)-MAC EDITION with Mac ATI Radeon 9800 Pro 128mb Video Card For G4/G5

Hi,
I am trying to help a friend whose graphics card has bust.
The old one was an ATI RADEON 9800 PRO-(256MB)-MAC EDITION.
I've been looking on ebay and it seems a lot cheaper to get a Mac ATI Radeon 9800 Pro 128mb Video Card For G4/G5.
Can I just swap them over? The connectors are not identical according to the photographs.
Thanks.

I'd like to thank everyone for all the really useful information in this thread. It helped me solve a similar problem, which I'll describe here briefly in case it helps someone else.
I have a 2004/5 dual 2 Ghz PowerPC G5 and an Apple Cinema HD display linked, as I later found out, with the now defunct ADC connector. The display suddenly started to look like that scene in The Matrix, when code falls like rain down the screen, and I worked out I needed to replace my Radeon 9800 pro video card (I discovered the board was blue when I removed a thick layer of dust).
I took japamac's excellent advice and bought a Geforce 6800 Ultra from the linked eBay seller in Hong Kong, who delivered it extremely quickly, along with the cables to plug it into the DVD drive power source and a CD with installation instructions. It was only then that I realised the card had two DVI connectors and my display needed ADC (I hadn't understood the difference).
eBay came to the rescue again with a seller who had a secondhand DVI to ADC adapter, which Apple produced when it phased out ADC about six years ago but no longer sells. It has its own power supply and looks like a large version of the Mac laptop power cables - and has added signifcantly to the pile of spaghetti under my desk.
Installing the Geforce 6800 Ultra is fiddly, and a bit scary if you're not used to delving into the insides of a Mac, but the instructions were clear and illustrated with useful photos. The video cable has four connectors. Two fit into the end of the card, the other two (linked in a Y shape) form a bridge between the DVD/superdrive and its power cable. You have to remove the DVD drive, unplug it, and then plug one of the two Y video card connectors into the DVD power cable and the other into the DVD drive itself. Then you replace the DVD drive, plug the two remaining cable connectors to the video card and ease it into the old card's AGP slot.
Finally, with the G5 reassembled, plug the adapter's DVI connection into the back of the card, plug the Cinema Display ADC cable into the adapter block, plug the adapter's USB cable into the G5 (this enables the the USB ports on the back of the display to work), and power up.
At the time of writing, the display has been up and running for a couple of hours and all seems fine.
Thanks again everyone for all your help and advice. If it wasn't for communities like this, it would be virtually impossible to solve problems with old but still serviceable Macs.

How to add a nvidia ge force video card for a pavilion g6 which has a intel hd 3000?

How to add nvidia ge force 525 video card for this laptop?

Hi,
The answer is no way you can add a video card on your laptop. Actually nearly all laptops including many which have dedicated video cards.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Upgrade video card for Late 2005 PowerMac G5

I am looking for an upgrade video card for a Late 2005 PowerMac G5, which has the PCI-Express slots. I need at least 256 MB of VRAM.
Since this computer is a discontinued model, there doesn't seem to be too many options for video cards. I've seen some cards like the NVidia 6600 or 6800, or even ATI's X800, but they appear to be difficult to find.
The one card that is readily available still is the ATI X1900, which looks great, but a little on the pricey side ($349).
I did notice the NVidia 7300 GT, which is more moderately priced ($145), but it only mentions being an upgrade card for the Mac Pro. Will this also work with the PowerMac G5 (Late 2005) model? I would hate to buy this video card and then find out that it won't work.

The only available upgrade card for the Late 2005 G5s is the X1900GT (aka G5 Edition). It's basically on par with the nVidia 7800GT that was available as a BTO option.
You can get the 7800GT and QuadroFX 4500 as replacement parts, but they're exorbitantly priced.
The Mac Pro cards won't work (even though they're also PCI-Express) due to the ROM on the card. It's only setup to work with the Mac Pro's EFI boot system and doesn't have the necessary code to work with the PowerMac's Open Firmware boot system.

ViewPowr Video card for Powerbook 1400

Just got one of these video cards for my PB1400 -- guess what? no drivers! Surely someone out there can point me in the right direction or just pass the software along. Already tried Newer Technology, no go.
VIEWpowr 1400/16 video output card Newer Technology
Much obliged.

I put part of that product name into google and got a bunch of applicable hits:
Google search: VIEWpowr 1400/16 video
Some users indicated the driver is not needed, it just works.

Color with NO recommended video card?

The recommended video card is no longer an option. The minimum card would be the nvidia 8800. This card doesn't support rendering in 10 12 or 16bit only 8 and 32 as far as I know. Does anyone know this to be different? Yes it does matter. render times and such with no render farm blow in 32bit and 8 bit is just not enough color depth to prevent banding.

jmdbrady wrote:
I have an iMac 20" dual 2.4Ghz with ATI Radeon HD 2600 (if it's what you're talking about) and Color works flawlessly(much faster than the original 25fps) with all the bit depths supported(8, 12, 16, float).
This does not tell anything when you are not telling what kind of footage (resolution, fps) you are using.
Color's limiting factor is GPU's power to handle pixels per second (resolution x fps), when you are not choking hdd pipes.

ATI Radeon 9600 Pro 256MB 8x Dual (DVI/DVI) (AGP) Video Card for PC/Mac

We want to be able to use our 30" cinema display from the G4 and was advised in a previous discussion to buy the ATI Radeon 9600 Pro 256MB 8x Dual (DVI/DVI) (AGP) Video Card for PC/Mac. It doesn't seem to be available anywhere. Does anybody know of an alternate video card that's currently available that will get us there? (We had the display running from a G5 that quit / logic board failure).
Many thanks,
Philip

The Nvidia 7800GS is a flashed card, runs a 30" with ease.
BruinMacs on Ebay is a great place to get one, you support the guy who wrote the original ROM for these.
He doesn't seem to have any for sale right now, but if you email him, maybe he will list one.
There are also flashed X800s that work on your MDD and can run a 30". They are pricey but will offer dual DVI while the 7800GS is single DVI with VGA for second display.
There are also flashed 6600GT AGP cards which will work, but harder to find.
Any of the above 3 will run circles around a 9600.

Best video card for my mac

Hey,
I just need help finding the best video card for my Powermac g4 fw800. One that my system can use fully. I currently have a Radeon 9000Pro with 64MB. Thanks
~R

Hi
The ATI 9800-256MB is currently the best card for your system. Actually, there are no other NEW video cards available.
BTW, xlr8yourmac hasn't done a video card review in years, they are just a bulletin board/newsletter now. If you are interested in seeing current testing of available video cards, check out:
http://www.barefeats.com/rad98pro.html
Regards,
Dave

Best video card for Archlinux?

What is the best video card for Archlinux distribution?
Is it possible to make Radeon HD 4870 work somehow in Archlinux, the same way like it works in Ubuntu?

Just see what drivers are you using with your ubuntu install? Catalyst/xf86-video-ati/radeonhd and install the same on arch.

Recommended Video Cards for K8MM-V

Similar Messages

Maybe you are looking for