Recommends memory for Equium M50-164 does not fit

I have the Equium M50-164 in its original configuration.
I wanted to add more memory so, on the recommendation of the Toshiba Product Support page, I purchased the Toshiba PA3411S-2M1G memory module (from eBuyer).
http://uk.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/jsp/individualOptions.do?service=UK&OPTION_ID=118626&t oshibaShop=true&selCategory=4700
On attempting to fit the memory module into my machine, I found that it does not fit! The plastic 'divider' between the two contacts in the laptop does not match the position of the notch between the two sets of pins on the memory module.
Tosh recommends Part Number: PA3411S-2M1G 1024MB (1GB) Memory PC2-4300 DDR2 (533MHz)
The memory that arrived has PA3411S-2M1G 1024MB (1GB) Memory PC2-4200 DDR2 (533MHz) on the box.
Someone in the forums says PC2700 PA3313U-2M1G is the part number.
The manual that came with the M50 states that PC2700 memory is required.
Does anyone know the correct part number, or a suitable alternative by a different manufacturer?
I'm quite annoyed, as the support helpline suggested I phone their Sales department! So they can sell me more incorrect memory modules?!? Now looking forward to the running the returns gauntlet with eBuyer...
Cheers,
Andy

Hi there,
I believe its annoying since they told you the wrong information. I wish you good luck for returning the memory module, maybe you can also try to sell it to another ebayer.
Regarding your memory: I agree with Ghost UK, you have to use DDR1 memory and not DDR2.
Dont forget to assign some reward points to GhostUK, I think he would appreciate it. ;)
Cheers guys

Similar Messages

  • Equium M50-164: IE not displaying pages correctly

    I have a Toshiba new Equium M50-164, but it will not display my internet page correctly at http://myweb.tiscali.co.uk/lorne.anderson/Bridge/
    It should look like this:
    http://myweb.tiscali.co.uk/lorne.anderson/NormalView.gif
    with the Bridge anaylser logo in the header but on my Toshiba it looks like this:
    http://myweb.tiscali.co.uk/lorne.anderson/ToshibaView.gif
    I have 4 other computers that all display it correctly (running XP,2000,98SE) and several friends say they can see it OK. If I look at the unlying html code via right click and view source in IE the bit that displays the logo should read:
    "align="left"></p>
    </td>
    <td width="610" align="center" height="65"><a href="../index.html" target="_blank"><img border="0" src="Images/Bridge%20Analyser.gif" width="311" height="57" align="left" alt="Opens my software home page to see more programs">
    </a>
    <font face="Arial Rounded MT Bold" color="#000080">
    <a href="../index.html">
    but on the Toshiba view source displays:
    "align="left"></p>
    </td>
    <td width="610" align="center" height="65"><a href="../index.html" target="_blank">
    </a>
    <font face="Arial Rounded MT Bold" color="#000080">
    <a href="../index.html">
    Note the 2 blank line where the code to show the logo should be. If I open the page from files on my hard disk it display correctly so my guess is that Toshiba have done something to overide default IE security settings but I can't see what. How can I get IE on my Toshiba to work the way Microsoft designed it to work?
    Just as a check, can anyone using this forum read the page correctly or do you also get the missing logo?

    Out of curiosity are you running any toolbars, add-ons or content filtering for IE?? As you pointed out the source code isn't the same as the original it's been altered and since the <IMG> html tag is missing that would explain why Internet Explorer isn't loading the image.
    I can't see anything particularly wrong with the code however your filename does have a space in it "%20" and might be triggering some kind of content filtering.
    As a suggestion rename the image file removing the space then update your html page and try again.
    Richard S.

  • SAP DSD - geocoding for customers - field format does not fit to examples

    Hello to all,
    We have a customer requirement behind this. We intend to use the DSD-Addon for several issues. One of these issues is to store geocoding information for our customer data within SAP. The SAP-Release is 4.7 with the DSD-Addon active. I checked all threads within the network and also checked SAP-Help and OSS-messages. Now our issue:
    When I look at the fields for storing the geocode (Longitude and Latitude) they do not fit to the testdata I got from our customers. The data look like this:
    customer:       x-Coord           y-Coord_
    10001             744264,3384   6657823,32
    10002             813368,6494   6699051,344
    10003             790475,8379   6702787,298
    10004             862729,1893   6690792,612
    The fields in the DSD-Customerdata have the format "123.123456789012". So I wonder how my data could fit into these fields. Is there anybody who has experience with this? I did not find any information or examples in the SAP-Help for this. What is wrong the format of the fields or the format of the x/y-Coordinates?
    Thanks in advance!
    Best regards,
    Gerlinde von Calle and Thomas Vomhof
    Edited by: Thomas Vomhof on Oct 8, 2008 6:12 PM

    Hi Srinivas ,
    Let me confirm which version of SAP your using
    As per your post -
    1. Table total does not fit into window 
         Check your table is fit in the window or not (window will be main window)
    2.Error occured while sending mail SO_OBJECT_SEND, return code L (message type: warning)
    Check your parameters that passing to the SO_OBJECT_SEND
    3.Page format with orientation unknown (message type: warning)
         Check your styles that are using  in the form 
    4.Form TOTALS has wrong page format (message type: error)
         Chekc your page format that is going to to support printer what your using - check the printer settings.
        I think your are using the u r own z page format
    Let me know if any concerns...

  • The memory for each PDF file does not add up to the Adobe Reader App size

    Why does the memory for each individual PDF file (about 250 MB) not add up to the total memory (690 MB) of the Reader app for my iPad 2?

    What version of Reader and OS X?

  • Bought video adapter for orig ipad, it does not fit

    I bought a new composite video adapter cable for my original ipad.
    It came in and does not fully seat. Ipad doesn't recognize cable.
    Apple sent a new one...same story.

    And?

  • Equium M50-164: Question about Fan usage & battery timer

    Hi !!
    Just got hold of my equium m50-164 laptop today and I wanted to clarify a few issues
    firstly,
    I flashed my bios with the latest version and upon the reboot the fan kicked in at full power and didn't turn off until i put the laptop into standby mode, this seemed to of rectified the problem but the fan seems to be kicking in a lot more than compared to before, luckily the fan isn't kicking into 100% speed but more like 15% - 20% every 30 secs or a minute then goes into silent mode, the fan hasn't hit 100% unless i do a reboot :),
    I know the fan will speed faster based on the cpu usage etc (thermal) but is this normal? I spoke to support and they wanted me to have an instant replacement but I said I would wait a few days to see if it would calm down :)
    and finally looking at the power meter and other software tools there seems to be no battery calibration, with previous laptops i noticed that numerical calculations are made based on battery usage and time left [i.e a timer] but with this laptop i kind find a timer - i would of thought tha every laptop has this facility nowadays !
    any advice would be helpful
    cheers
    Ephid0r UK

    Hi
    Please dont be mad on me but I really dont understood why your first step is BIOS update. The unit is delivered with actual BIOS and it is really not necessary to make it before you notice some problems. I just hope that you have enough experience with it because I have read a few postings on this forum about BIOS damage while BIOS update and to make it good again costs a lot of money.
    Your BIOS is updated and there are new values that should be used by Power saver utility (responsible for cooling fan monitoring). I recommend you to remove preinstalled power saver, restart the unit and install it again. I hope that the result will be better.
    Battery calibration I dont know what you want exactly but the battery usage can be control by power saver tool. On the task bar there is symbol for power saver and if you move the mouse pointer on it the battery capacity and left time will be shown.

  • Equium M50-164 - Touchpad problem if AC/DC adaptor is connected

    Hi
    Can anyone help? My Toshiba Equium M50-164 has an intermittent problem with the touchpad. Sometimes its fine, other times the cursor will jump around the screen uncontrollably then just lock up, the problem goes away when I remove the power cable and returns when it is reconnected.
    Other times it is fine with the power cable connected, this suggests possibly the power supply is causing a problem to me, but I was hoping someone with more experience could give me some advice.
    Thanks in advance.
    lbansal

    Hi
    Are you using an original Toshiba AC/DC adaptor or one from a 3rd party manufacture?
    Its not easy to say what the reason is, it could be a problem of AC/DC adaptor or mainboard.
    I think the best way is you contact the nearest authorized service provider. Go to them with the notebook and AC/DC adaptor and ask a technician for help. They can check the notebook and hardware.
    Good luck! :)

  • Hello everyone. I have recently installed a Samsung SSD (solid state hard drive) into my destop PC. For some reason Lightroom does not see it ? So i cannot ingest photos from it, or copy photos from a card to it. It is not listed as a drive option. LR see

    hello everyone. I have recently installed a Samsung SSD (solid state hard drive) into my destop PC. For some reason Lightroom does not see it ? So i cannot ingest photos from it, or copy photos from a card to it. It is not listed as a drive option. LR sees every other drive. My computer sees it fine, so i was able to create a catalogue there. Im running windows 8.1. Any ideas ? I will also add that this drive became corrupt and was repaired by Samsung. Maybe they didn't do a very good job.. ..

    Yes pretty much that, but to clarify sorry
    Opened Lightroom.
    Create new catalogue.
    This opened the Windows 8 file explorer window and Windows recognises the drive. So I was able to create a catalogue there and save.
    I then inserted my memory card into my card reader which LR recognised. I selected it, chose all the photos within and then navigated to the right side of the Lr import dialogue window to locate this problem drive as on this occasion i want the RAW files on the same drive as the lrcat. However all my other drives are listed but not this Samsung SSD.
    In addition this Samsung SSD is not listed a drive to import from in the same dialogue window.

  • I updated my computer to os x 10.5.8 so I can synchronize iphone with itunes.  For some reason computer does not noticed it has been updated.  Can anyone advise?

    I updated my computer to os x 10.5.8 so I can synchronize iphone with itunes.  For some reason computer does not noticed it has been updated.  Can anyone advise?

    Try what Terence Devlin posted in this topic:
    Terence Devlin
    Apr 14, 2015 11:21 AM
    Re: Is Iphoto gone ? i want it back!
    in response to Johannes666
    Recommended
    Go to the App Store and check out the Purchases List. If iPhoto is there then it will be v9.6.1
    If it is there, then drag your existing iPhoto app (not the library, just the app) to the trash
    Install the App from the App Store.
    Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
    http://support.apple.com/kb/HT4928
    One question often asked: Will I lose my Photos if I reinstall?
    iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.

  • I have a macbook 13"screen purchased in 2007; I want to hook it up to my HDTV; I purchased a mini display port to hdmi adaptor but it does not fit.   what kind of adaptor will work for this model?

    I have a Macbook, 13" screen, purchased in 2007.    I want to hook it up to my HDTV; I purchased a mini display port to hdmi adapter but it does not fit.   Any suggestions?

    If you connect yourMacBook using a MiniDVI/HDMI adapter you will need to use external speakers for audio since the pre-2010 MacBooks will only send video through the MiniDVI or MiniDisplay Port . The MiniDVI/HDMI doesn't carry audio and there's no audio plugs on the TV to work with HDMI since it's expecting audio with the HDMI.
    If your TV has a DVI input plug you can use a MiniDisplayPort/DVI adapter. Then a DVI cable to the DVI input plug on the TV. The TV will have RCA audio plugs for use with the DVI. Plus DVI gives a sharper image than HDMI.

  • Text ID  for text object MATERIAL does not exist - MM01

    Hi All,
    I am getting below error message when trying to save Material Master in MM01.
    Text ID  for text object MATERIAL does not exist
    Message no. TD603
    Diagnosis
    You want to edit a text. However, the text ID (text type) of the specified text object does not exist.
    Procedure
    You can display a list of valid text IDs (text types) using F4=Possible entries. You can select the required text ID from this list with F2 or a double click.
    The valid text objects are listed in table TTXOB. The valid text IDs (text types) for an object are specified in table TTXID.
    I have searched the forums but couldn't get relevant message.
    Please assist.
    Thanks,
    Raj

    Hi Jurgen,
    This is the complete message i am getting.
    Text ID for text object MATERIAL does not exist
    Message no. TD603
    Diagnosis
    You want to edit a text. However, the text ID (text type) of the specified text object does not exist.
    Procedure
    You can display a list of valid text IDs (text types) using F4=Possible entries. You can select the required text ID from this list with F2 or a double click.
    The valid text objects are listed in table TTXOB. The valid text IDs (text types) for an object are specified in table TTXID.
    If I enter MM02 and without changing anything if i save still i get this error message.
    Thanks & Regards,
    Raj

  • Text ID for text object BUT000 does not exist

    Hi Experts.
    I am doing data migration using LSMW with IDoc. I have this error message "Text ID for text object BUT000 does not exist" when processing the IDoc.
    Can anyone tell me what is this error about and how could i fix it. A step by step guide would be nice. Really need advice urgently.
    I'll definitely rewards points.
    Regards,
    Julianna

    for this u need to maintain the text object and its related text id using the TC: SM31 in rel. view of  ur tcode( like MM01, Va01 etc).
    first get the view names(1 for text object and 2 for text id) from fun. people.
    then go to sm31 with 1 view, create BUT000 .
    then go to sm31 with 2 view, maintain text id for the text object:BUT000.

  • Anyone else had issues with phone network being unavailable on iPhone 4 since updating to iOS 5.0.1? My iPhone 4 is continually searching for a network and does not find my provider. I swapped SIMs with another iPhone 4 on ios 4 to confirm device problem.

    Has anyone else had issues with phone network being unavailable on iPhone 4 since updating to iOS 5.0.1? My iPhone 4 is continually searching for a network and does not find AT&T, my provider. I swapped SIM cards with another iPhone 4 running ios 4 and established this is a device problem, not a SIM card problem.

    Does the device get any signal? 
    Sounds like the device may have had a hardware failure.  If it is out of warranty, the only option is the Out of Warranty replacement.
    AppleCare is only an option if it is still under the original warranty.

  • Category for service category S046 does not exist

    Dear Experts,
    This is regarding the Bdoc error "Category for service category S046 does not exist". ECC service materials are trying to replicate from ECC to CRM. In our scenario we doesn't required ECC service material in CRM. I have not downloaded service materials relevant data. Still i am facing the above error.
    Please help to fix the above error.
    Regards
    Ashwini

    Hi,
    Thanks for your reply. I have maintained the filter on service_master  object is not working.
    I have not downloaded the service material from ECC to CRM.Then what could be the reason for the above bdoc error.
    Please help me.
    Regards
    Ashwini

  • How do I create an executable for a computer that does not have IVI drivers

    I'm creating an executable driver (based on the NI drivers) for a TDS 3054 intended for a computer that does not have the IVI engine. I would prefer to install as little software on this computer as possible. Is it possible for me to build the driver with the appropriate support DLL's without installing IVI on the user's computer? How do I do this?
    Thank you,
    Zach Oberman

    Zach,
    Since the tkds30xx driver you are using is IVI based, you will not be able to use it without the IVI Engine.
    If you must build an executable that does not require the IVI Engine, then you will need to use a traditional LabVIEW driver or convert a VXIpnp driver into LabVIEW. Neither of those drivers would require the IVI Engine.
    At this time the only TDS 3054 driver on NI's IDNet website is the IVI-based tkds30xx driver.
    You may be able to obtain a traditional LabVIEW driver from
    Tektronix
    Developer Exchange
    Requesting a
    driver
    Other Resources
    Thanks,
    --Bankim

Maybe you are looking for