Recon 3d Control Panel needs 30 seconds to start

I've bought the Recon 3d PCIe. My operating system is windows7.
My problem: when I click on the Control Panel Symbol it need about 30 seconds to start. I've the latest driver update. I tried a new clean installation but got the same problem.
I there anyone else with this problem ?
Greetings

Originally Posted by juettnla
I've bought the Recon 3d PCIe. My operating system is windows7.
My problem: when I click on the Control Panel Symbol it need about 30 seconds to start. I've the latest driver update. I tried a new clean installation but got the same problem.
I there anyone else with this problem ?
Greetings
Same here, but it only happens when it's first opening of CP, other times it opens fast.

Similar Messages

Tactics 3D alpha headset control panel doesnt want to start!

First of all the USB thingy isn't working... no sound is heard no matter I plug it in usb 3.0 2.0 front back ports...
Asrock Extreme 6 P67 Motherboard. Windows 7 x 64 ultimate
When I plug the 3.5 jacks it works fine, well the sound atleast, Though the controll panel still says not detected!
Installed this driver: SBTA_PCDRV1_WIN8_LD_1_01_0001
The audio device supported by this application cannot be detected. This application will now close..
Can someone please assist thank you.
Or I will have to return this product.

First, thanks for your help.
Here are the options I have for playback devices:
Speakers
Headphones (Used when headset is attached via jack -- issue is present)
Digital Audio (S/PDIF)
Digital Audio (HDMI)
Headset (SB Tactic3d Alpha) (Used when headset is attached via USB -- issue is present)
And for recording devices:
Microphone (3.5mm jack) (Used when headset is attached via jack -- issue is present)
Microphone (Internal laptop microphone)
Headset Microphone (SB Tactic3d Alpha) (This setting is used when the headset is attached via USB -- issue is present)
The headset does not act just like a normal headset. It has not been working since I purchased it, unfortunately, and I did try to connect it after a system restore without the USB attachment. The default settings are for the speaker and internal microphone, but in order for sound to play out of the headset I have to set it as the default, either as "headphones" or "headset" regardless of how it is attached to the computer. I did not have to do this with my previous headset, and my old headset did not have this issue.
Also, if I remove the microphone and mute/unmute the headset microphone with the in-line switch, it registers as noise in the sound settings menu. I suspect that there's something wrong with the wiring at the in-line controller.

HT204144 control panel need to be open to use airdrop?

hi, every time I want to send a file with airdrop, did I need to ask to my friend to open their control center?
because I don't see them until they open it.

Actually, we want both...
Most of the time, SSO is desired, but when testing role changes etc we need to be able to log on with a test user.
The desired scenario:
When you try to run a web report/query and have not logged on, the system should offer you two options:
1) Manual log on
2) Single sign on
If you wait for a specified time (say 3 seconds) without selecting an option then SSO is used automatically (to avoid having to select SSO every time you need it).
If you click manual log on then you should be prompted for a username/password and be logged on as the specified user.
Can this be done at all?
Kind regards
/Kenneth

When I try to set up Icloud control panel in Windows Vista, I get "your setup couldn't be started because the Icloud server stopped responding. I've tried loads of fixes suggested on the net but none worked. Can anyone help me please?

When I try to set up Icloud control panel in Windows Vista, I get "your setup couldn't be started because the Icloud server stopped responding. I've tried loads of fixes suggested on the net but none worked. Can anyone help me please?

Hello, ksb2.
Thank you for visiting Apple Support Communities.
We are investigating this issue. This article will be updated as more information becomes available.
iCloud: iCloud Control Panel setup cannot be started
http://support.apple.com/kb/TS5178
Cheers,
Jason H.

Java Control Panel applet won't run

I am running Windows 2000 Server and I need to import a certificate into the certificate database. Both the jpicpl32.cpl and jpicpl32.exe fail to run. When I try to execute either of them they launch an instance of javaw.exe (confirmed in the task manager) but the interface never comes up. Java Web Start misbehaves in the same way.
I am using JRE 1.4.2_04 and I have uninstalled and reinstalled it without solving the problem. One possible issue is that the person who did the initial install of the JRE moved the directory to a different drive after the installation was complete. When I discovered this I edited the windows registry and changed all of the pointers to the new location. That did not help and that is when I uninstalled and reinstalled the JRE.
I have found several messages in this forum indicating similar problems with prior versions of the JRE but none of them had any replies (except for some who said they were having the same problem). I have also searched the web but all that I can find is information on how to troubleshoot java applications, not the JRE itself.

I have been working on a project rolling out J2RE1.4.1_02 onto approximately 100 pc's. Half of them are Windows 2000 laptops and the other half use Windows XP sp1 (a few with SP2) Desktops varying in spec. To date I have yet to have this issue on the Windows 2000 laptops. Of the 50 XP machines, so far I have encountered this problem on 20 of them.
I used almost every method described in the forums as well as loads of other options to resolve the hanging of javaw.exe. We havent rolled out the application that requires this JRE version yet and I am only trying to run the Java contol panel to change user settings.
At first I thought it was conflicting software, so I uninstalled package by package. Halfway through, the console worked, but on reboot, did not work again. I eventually figured out that once you install JRE and it does not work, just log off and then on again without rebooting and it starts to work. We cannot give this as a solution to our users. I also edited the registry removing all refrences to any other java files after uninstalling all java related apps. Re-installing after this did not fix it either. I tried to avoid using Javaw.exe by chaning the path in the registry to java.exe, but this did not work either.
Sometimes I could get Java Web Start working, but not the control panel, then when i could get the control panel working, java web start wouldnt work. These 20 machines were part of our original image of XP that was rolled out. The other 30 machines are a slightly newer build but have the same applications. Do you think it could be a way the group policies are applied? They are local policies as we are still building our 2003 servers and I set everything to 'not configured' but it still did not change anything. If I rebuild the image and install all their apps, it works fine. But i would like to avoid rebuilding 20 PC's. I have already rebuilt 10 of them and hate using that as a solution. The group policy settings were initially created by one team and then later a second team created our new image that we use. So it may be just a configuration that the first team have implemented or locked down that the second team did not.
What is strange is that it doesnt run on first boot up, but does run after logging off and on again. Somebody in one of the other forums mentioned that it may have something to do with explorer.exe, but i doubt it. I am exasperated and would appreciate any ideas I have not tried.
Thanks guys,
Kerri

A205-5809 - I cannot bring up the Control Panel or do a System Restore

Hello. I am the Chairman of our church fundraiser and I have inherited a laptop from the previous Chairman. I am not used to working on a Toshiba and really not used to working with Vista.
When I first got the computer I downloaded Microsoft Office Home Ed 2007 and a few anti-virus programs. At some point the computer started acting up. I tried to do a System Restore to a few different System Checkpoints and had no luck. The System Restore would not complete.
My immediate concern is the Control Panel. If I go to the Start Menu and click Control Panel, a small white appears as if the Control Panel is opening and then it immediately disappears. I can access the Control Panel by going through My Computer though.
I mentioned both issues in this one post because I do not know if one issue is causing the other. Please give me any suggestion as to why I cannot do a System Restore or why the Control Panel will not open up from the Start Menu.
Thanks in advance!
Solved!
Go to Solution.

Satellite A205-S5809
In case Christopher's fix doesn't solve all your problems...
Have you installed Service Pack 1? If not, do so.
How to obtain the latest Windows Vista service pack
Does this fit the situation?
Icons are missing from Control Panel, or you cannot start Control Panel, the Welcome Center, or game...
Restore Points get corrupted from time to time. The fix is to turn the function off and then on again. Unfortunately, all previous restore points are lost.
Turn System Restore on or off
-Jerry

I cant sign in icloud control panel

It said You cant sign in because of a server error. what can i do to fix it?

Hi xkenkulx,
If you are having issues signing in to iCloud or the iCloud Control Panel, you may find the troubleshooting steps outlined in the following articles helpful:
iCloud: Account troubleshooting
http://support.apple.com/kb/TS3988
iCloud: iCloud Control Panel setup cannot be started
http://support.apple.com/kb/TS5178
Regards,
- Brenden

Failed to bring up UDS Control Panel

Hi,
I have installed FORTE-UDS 5.0.3 on a Windows 2000 professional machine. The problem is, when I tried to bring up the UDS Control Panel, I see the start up screen flashed by and nothing happened.
From the DOS prompted, I manually invoked the command:
C:\forte\install\bin\ftexec.exe -fs -fss -fi bt:c:\forte\USERAPP\ENVIRONM\CL0\FCONTROL
and got the following error message:
ftexec Forte Version 5.0.3
Windows NT
Copyright (c) 2001 Sun Microsystems, Inc. All rights reserved. Use is
subject to license terms. Third-party software, including font
technology, is copyrighted and licensed from Sun suppliers. Sun, Sun
Microsystems, the Sun logo, Forte, iPlanet and Unified Development
Server are trademarks or registered trademarks of Sun Microsystems, Inc.
in the U.S. and other countries. Federal Acquisitions: Commercial
Software - Government Users Subject to Standard License Terms and
Conditions.
Copyright (c) 2001 Sun Microsystems, Inc. Tous droits r�serv�s. Distribu�
par des licences qui en restreignent l'utilisation. Le logiciel d�tenu
par des tiers, et qui comprend la technologie relative aux polices de
caract�res, est prot�g� par un copyright et licenci� par des fournisseurs
de Sun. Sun, Sun Microsystems, le logo Sun, Forte, iPlanet et Unified
Development Server sont des marques de fabrique ou des marques d�pos�es de
Sun Microsystems, Inc. aux Etats-Unis et dans d'autres pays.
Tue Nov 13 18:45:58 2001
Process ID 516 (Native threading)
Type Service Flags Level
err sh * 255
Loaded Forte Message Catalog 'fortemsg/en_us.cat'
NLM Startup is Complete - Partition's Locale is 'en_us.win'
SecurityManager Using: Default-Export-Security
ERROR: Exiting due to following exception:
SYSTEM ERROR: Could not find the transport provider library named windows
sockets.
Class: qqsp_SystemResourceException
Error #: [501, 13]
Detected at: qqcm_CommManager::InstallTransportProvider at 1
Error Time: Tue Nov 05 16:00:33
Exception occurred (locally) on partition "Forte_Executor", (partitionId =
0x0, taskId = [0x0.8]) in application "Forte Runtime", pid 516 on node
WW730BNN1 in environment <unknown>.
SYSTEM ERROR: System Error: The specified module could not be found.,
loading the library 'windows sockets.dll'
Class: qqos_DynamicLibraryException
Error #: [101, 29]
Detected at: qqos_DynamicLibrary::OSLoad at 1
Error Time: Tue Nov 05 16:00:33
Exception occurred (locally) on partition "Forte_Executor",
(partitionId = 0x0, taskId = [0x0.8]) in application "Forte Runtime",
pid 516 on node WW730BNN1 in environment <unknown>.
Any help would be greatly appreciated!

Thanks Roberto for your reply. I could not find "windows sockets.dll" anywhere. This .dll file does not exist even on the Win 2000 machines that I had no trouble invoking UDS Control Panel. My machine has wsock32.dll in the C:\WINNT\system32 directory and the system path is also set to point to that directory.
By the way, when someone else logs onto the same machine, he has no trouble bringing up UDS Control Panel. The problem occurs only if I logon. I also compared the environment variables with that person's environment variables and they are exactly the same.

Icloud control panel server error in widows vista

Had to uninstall all icloud, itunes, apple update, etc in order to clear a "file not found" message at windows boot/restart. That worked fine, but now after reinstalling icloud control panel for windows vista, I can't sign in to configure. Getting "You can't sign in because of a server error" message.

Hi there PoPpOper,
You may find the troubleshooting steps in the article below helpful.
iCloud: iCloud Control Panel setup cannot be started
http://support.apple.com/kb/TS5178
-Griff W.

Windows Update is not available in Control Panel

Hi.
I upgraded Windows 10 ETP 9926 to 10041 and Windows Update disappeared from the Control Panel.
How to add it back? I made a lot fo restarts, but nothing has changed.

Hi Lukas,
In 9926, if you changed the regedit value you could display the windows update in the old control panel.
See these steps:
Enable Windows Update in Control Panel - Windows 10 Build 9926
In 10041, this will also show the windows update in the old control panel but I have had problems checking for windows update. When I disabled the windows update from the old control panel, my windows update started running normally. So I guess, they have
finally blocked checking updates the old way.
Hope this helps..

PC went south. Geeks brought it back. PS elements and premier 11 can't start. Error msg sez configuration incorrect needs to be reinstalled. When I load the disk I get a blank screen. Try to uninstall and can't find apps i control panel. How can I get the

PC went south. Geeks brought it back. PS elements and premier 11 can't start. Error msg sez configuration incorrect needs to be reinstalled. When I load the disk I get a blank screen. Try to uninstall and can't find apps i control panel. How can I get the apps back?

adobeamatuer
Thanks for the reply.
Although the security of Windows XP SP3 32 bit is compromised by Microsoft no longer supporting XP, if Windows XP was restored as claimed, you should still be able to install/uninstall Premiere Elements versions of it that you did before the Microsoft support removal.
I think a revisit to the Geeks would be in order. It may be that they could not restore Windows XP because of the Microsoft non support. I would take along the Premiere Elements installation disks so that you do not leave there without actually seeing Premiere Elements (or a non Adobe program) running on your restored Windows XP. What was the other software that you tried to use that did not work?
Please update us on your progress when you get a chance.
Best wishes
Thanks.
ATR
Add On...spelling correct 12 03 2014.

Need help removing Creative Audio Control Panel

So I've been trying to get the Creative Consol Launcher to work with my soundcard again and found that in my "Programs and Features" list in windows 7 there is one item of Creative labs software that I can not remove. It is called "Creative Audio Control Panel" and when I attempt to uninstall it it tells me "C:\Program Files (x86)\InstallSheild Installation Information\{7E96A7F-AFE3-47-87B-583E37639E8}\SUPPORT.Cab not found."
Whenever I try to use the Creative Console Launcher it tells me "There are no supported audio device[sic] available. You need to close the application. Click OK to close the application now."? I assume it's trying to launch Creative Audio Control Panel which for some reason or other is no longer present on my system but was never properly uninstalled. Also, great work on that error message - seems like Creative needs more proof readers.
In other words it seems the file I need in order to uninstall this broken program is missing - any idea what I should do? I've tried seeing if I can reinstall the program but I can't find any setup file for it online - all I can find is "Creative Console Launcher" which seems to intigrate a launcher feature into volpannel, but since it doesn't have the Creative Audio Control Panel to actualy launch it just gives me error messages if I want to get into my EAX settings or mixer or anything like that. If anyone knows how I can uninstall/reinstlal this program (in windows 7) I'ld be very greatful.

Well I believe I have found a solution to my problem and it is manyfold so here goes.
First off, Creative Customer Support Americas corresponded with me via e-mail and notified me that there are known issues with all PCI cards and Creative Audio Consol in Windows 7 (which is to say they don't work together at all).
After getting this info I removed my SB 0790 card and plugged in another one I had handy - it's still a SB X-FI Xtreme Audio but this one is has a PCIe interface and a digital audio in/out jack on the back to boot - this card is manufactured not by Creative but by MSI (licenced I assume) and came with my motherboard (good thing I had it laying around).
Initialy I had the same issue - even uninstalling everything related to creative and re-installing the hotest newest drivers from the site simply wouldn't resolve the issue. Finaly I downloaded a 3rd party program called CCleaner - a freeware utility that can clean up registry errors and delete items off the program list by force if need be (and it was in this case). I used that to completely eradicate Creative Audio Console and Creative Console Launcher, re-installed the latest drivers and audio pack for the PCIe card, and then even had windows update the driver again after that (the result of which was not a new driver version but it did seem to download and install something - no clue what). After all of that I once again had a functioning version of Creative Audio Consol back on my computer - and now it recognizes that I have a valid card installed and I've got access to all the features I was missing. The interface for Creative Audio Console looks a bit different than it used to (no longer a fake looking stero but instead a fairly plane interface) but whatever it's working and that's what I care about.
Oddly enough with all those installs it never put Volume Panel or Creative Consol Launcher back on my computer, I wound up having to install those off of the MSI card's driver disk to get easy access to the Creative Audio Panel again (otherwise I'd have to either make a shortcut or go straight into the install directory any time I want to launch it - now though I can launch it right through the Volum Panel).
One persistant issue still remains: In my recording audio device list I am still missing: "What U Hear" but it has been this way since I installed Windows 7 for the first time in October when it releaed, and I have given up hope on ever seeing What U hear again - If I want to record from my soundcard I have a 3rd party freeware utility called "Virtual Audio Cables" that are a bit clunky but get the job done.
Conclusion:
Though it may claim on Creative's support page for the SB0790 (Sound Blaster X-FI Xtreme Audio) soundcard that the latest drivers support Windows 7 it is abundantly clear that this is NOT the case. You will manage to get audio out of it, but almost no other creative aplication is going to work with your card or even detect that a valid working SB card is installed. It seems the only aplication I could get working relyably was the auto updator (which was able to see I had the card installed) and Volume Panel. By the admission of Creative Customer Support America, however Creative Audio Panel will not work, and I have observed that Creative Consol Launcher does not function properly either. Indeed even plowing through the file system you'll find support only for XP and Vista versions of the drivers - there is no Win7 specific driver for either this card or it's PCIe counterpart.
Also don't expect to have access to the "What U Hear" utility - this goes for the PCIe version of the card as well. As ever, it seems the marketing guys are making claims about the card that can't actualy be backed up, sure it's techincaly illegal, but only if your customers are willing to start a class action lawsuit over a 50 dollar soundcard that sort-of works anyway.
Issue resolved for now - and I am no longer pulling my hair out in frustration.
Links to the Utilities I used to make my card functional:
CCleaner
http://www.ccleaner.com/
Virtual Audio Cables
http://software.muzychenko.net/eng/vac.html

Sound Blaster Z Control Panel - does it need to be in startup?

Hey gang,
I built a new system this past week and put a new Sound Blaster Z card in it - which I am very thrilled with. I ran this new system for about 3 days with the onboard Real Tech sound, which at the time I thought was pretty good - till I put this new card in. Really liking it so far.
My question has to do with the Sound Blaster Control Panel, showing as a startup item. I have the option " start sound blaster Z control panel at startup " unchecked.
However in task manager startup tab, it shows Sound Blaster Control Panel as a startup item. It does show the sound blaster control panel listed as running in the processes tab of task manager using app 45mb of ram.
Does this process need to be running or can I disable it? Maybe it needs to be running to process sound with the settings I have chosen in the control panel?
Just curious, thanks for any tips on this.
- Don

And of course now that I have asked the question, the last couple of times I have booted and checked, that is not the case - the Sound Blaster Control Panel is not showing as a running process...
The only items I see as running processes for this card in task manager now are:
Creative Audio Service
SoundBlaster Audio Service
Strange, but I can live with that .

Control panel added to start page

On Windows 8.1 and Server 2012R2 I can add a link to the control panel and the command prompt to the start page.
couldn't see that I was able to do that in Windows 10 tech preview

On Windows 8.1 and Server 2012R2 I can add a link to the control panel and the command prompt to the start page.
couldn't see that I was able to do that in Windows 10 tech preview
You do not say which Win 10 TP build you are now using.
If you are using one of the latest, i.e. 10041 or 10049, you might not need a link to Control Panel or Command Prompts in Start Menu screen.
Right click at Start button > the popup box gives you a list which, among others, includes Control Panel link and 2 Command Prompt links.
Adding.....
Slightly off topic: when you login to your account, it opens to the desktop. Right ?
So, wouldn't it be more convenient to create shortcuts to desktop ?

Need help installing Control panel for Creative Roar speaker!!!

I am trying to download the control panel to my Windows XP PC, or my Windows 8 laptop but when I download the try to install the control panel both my PC & laptop says, Setup unable to detect a supported product on your system. What does that mean?

hiawa23,
You need to press and hold the PLAY button to activate the sound card feature. You may refer to this article for more information.
You can also do the following if your PC is still unable to detect the speaker as a USB audio device:
1. Ensure you use the supplied USB cable. It is able to handle both power and data.
2. Power cycle the speaker (turn off and then turn it on)
3. Connect the speaker to another USB port and try again.
4. Do not use any USB hub; ensure the speakers is connected directly to your PC
5. Try to connect the speakers to another computer and then try again.
If the speaker is still not detected as a USB audio device, perform the following:
1. Hardware reset: In any state, press and hold the Power button for more than 10 seconds, and then press the Power button again to turn the speakers on.
2. Master reset: While the speaker is in pairing mode, press and hold the Multifunction and Volume down (-) button together until a voice prompt is heard that 'master reset' is completed.
Cheers,
Colin-CL

Recon 3d Control Panel needs 30 seconds to start

Similar Messages

Maybe you are looking for