Recon acct ready to input field- in G/L Master data

Hi Gurus
What is the importance of field- Recon account ready to input in G/L master data?

Hi,
If you need more details with example, i will try to expalin you.
when ever user want to change the reconcilitaion account at the time of creation of document, its not possible to change bcoz one account has only one recon a/c
But with the help of this check box we can able to change that recon a/c at the time of document for that particular vendor /customer/ asset
Pls go through this link
[G/L account must be marked as ready for input;
Regards,
Gamidii

Similar Messages

Supplement Auto Posting/Recon. acct ready for input

Hi SapGurus,
I need help, i want to know the details like as why and when to use in which type of GL
1) Supplementary Auto Posting
2) Recon. Acct ready for input.
As the difference between Recon. account for acct type (like K,D,A etc.) and Recon. Acct ready for input.
Regards.
Tej

Hi,
1. Supplement for Auto Postings : This can be used when a GL Account determined by automatic Account assignment is to be replaced manually. If you do not have this tick in the GL, you cannot change GL's which are generated by automatic posting.
2. Recon Account Ready for Input : This is used in case of Alternate Reconciliation Accounts. The Recon Account is usually entered in the vendor/Customer master and all postings happen to that GL's only. But in case for a single Vendor, you want to post in different Recon Accounts at run time, then you need to config the alternate recon accounts and mark this field"Recon Account ready for input' in GL master in FS00.
When you mark a GL for Recon Account type for A, K, D then that GL is marked as Reconciliation Account, but when you tick the Recon Account ready for input tick, then this Recon Account can be changed in run time at the time of posting.
Regards,
SAPFICO

Profit center field in production order master data in KKF3

Hi GUrus,
is there any way of mass updating the profit center field in production order master data in KKF3 transaction. PLease help
Anusha

HI charlie,
When i try to change the profit center, the system gave this message. We already have a profit center for a production order and we need to change the profit center, That is when we are getting the errror message.
You have changed the profit center from AR00620800 to AR00620301. This is only allowed when the corresponding configuration was made in Customizing. Then this message is only a warning, which you can ignore. PLease help
Thanks
Anusha

Custom Fields in the Product Master Data

Hi Experts!
I have to add some custom fields in the product master data on SRM and I also need to have this data to be synchronized with the same in ERP.
After having added this fields, can you pelase suggest a way to syncrhonized them with the ERP? is there a BADI I can leverage as in CRM?
Thanks in advance.
Points promised.

Hi,
See these related threadS:
Re: Replicating additional fields (R/3 4.7) to SRM product master
Transfer Inforecord Conditions Scales to SRM Product Master
https://www.sdn.sap.com/irj/scn/threadmessageid=6669812#6669812
Extending SRM Product Master
BR,
Disha

Field 'material' in service master data and material requisition

Hello, all!
Could anybody say, what is the purpose of field 'material' in service master data ('other' tab) and why system after setting the object type in that tab to 1 'material' will never show service in search help?
This first question comes from the second problem: I thought that I can make a service group, containing materials and services (like routings in PP), so system will be able to make material requisition for a case in automatical manner.
But now I'm confused. It looks like material requisition can only be made manually throught NMM7.
Is there any abilities to make requisition in automatical manner?
Thanks a lot!
Edited by: Pavel Sidorov on Feb 15, 2008 4:30 PM

Hi Pavel,
ad1) we support the creating of services based on material consumptions via service rules. Users are able to activate services rules which generate services based on the material consumption per case. But we need two entities material and services. Service rules are running automatically and no further manual work is necessary.
You will find the Service rules via IMG -> Patient Billing -> Service Rules. Service Rule R24 is the relevant service rule to generate services based on matierial consumption.
ad2) The field object type is not been used in Patient Management. It is only used by our clinical partner solution i.s.h.med. I understand that this field is confusing and not very well documented. In Patient Management we use the service master only for "services". i.s.h.med uses the field "material" and "personel" (e.g. physicians time). But it has no relevance for Patient Management.
Best regards, Robert
Edited by: Robert Mathiowetz on Feb 28, 2008 2:51 PM

Warranty Date field in the equipment master data

Hi everyone!
I wanted to display the warranty date field in the equipment master data (IE01). I have already made the configuration and added the additional tab and screen thru this path:
Plant Maintenance and Customer Service > Master Data in Plant Maintenance and Customer Service > Technical Objects > General Data > Set View Profile for Technical Objects
But still, the tab is not added and the warranty date field is not found in the "Define Field Selection for the Equipment Master Record". please help me with this. We need this data because we are not using serial numbering and warranty master data that's why a way to track the warranty date is thru this adjustment in the equipment master data screen.
Thank you very much.

Marlon,
Make sure that you have assigned this specific profile to the Equipment category of the associated equipment that you are creating under SPRO > PM> Master data> tech object > Equipment > Equip category.
Regards
Narasimhan

"Region" field in Cost center master data needed as mandatory

Hello Gurus,
I would like to ask you where exactly in SPRO we can customize the field "Region" in Address tab in Cost center creation as a mandatory? so far its only optional
is this possible?
thanks in advance for your help.
Hana

Hey Hana,
According to [this thread|Re: KS01 , Field status Cost center master data;, you will need a user exit to accomplish that.

Company code field in cost center master data

I am trying to create some cost centers, but noticed that the company code field is not available for entry in the cost center master data. In other words, the company code field does not appear or is hidden. My understanding is that an entry in company code field in cost center master data is mandatory. Can someone advice as to what setting is missing?

Hi MG,
Appearance of the field "Company Code" in cost center master data depends on the following point...
In Controlling Area settings in OKKP, if you have opted for single company code, then, whatever the cost center you create under this controlling area is obviously belongs to that company code only. So, system will not display the filed "Company Code" in cost center master data.
If you have opted for cross-company code controlling in OKKP settings, then, when you create a cost center in that controlling area, then the system will give the field "Company Code" in cost center master data so that in which company code you need to create the cost center.
I hope u got it...
Srikanth Munnaluri

Recon account ready for Input-Not possible to change during MIRO

Hello
We are on ECC 6.0
System does not allow users to change Vendor Recon A/c during invoice verification through MIRO. Recon A/c field is greyed out under Details tab in MIRO.
Recon Account has been declared as Ready for Input and Alternative Recon A/c has been mapped wrt GL A/c by assigning it an ID.
However, i am able to change recon A/c during invoice booking through FB60 or F-43 t codes.
What am i missing?
Does sytem allow change of Recon A/c in MIRO? If yes, how?
Thanks.
Vimal

Hi, check vendor rec. account for this Company code, then check Accounts Receivable and Accounts Payable-Business Transactions-Postings with Alternative Reconciliation Account-Define Alternative Reconciliation Accounts
If there exists such Defining, so check may be Alternative account just for Aut.posting, or forbided for posting in this Currency

Where is the "not ready for input" field stored in SAP?

Hi,
In the tcode CT04, the 'Additional Data' tab has a field called 'not ready for input'. I want to find this value in a table. I thought it was in CABN-ATINP but this does not seem to be populated all the time.
e.g.
1. characteristic ABCDE has the value checked in CT04 but there is no entry in CABN-ATINP
2. characteristic ZYXWV has the value checked in CT04 and there is an entry in CABN-ATINP
Does anyone know:
a) why?
b) how to find the value for point 1 above?
Thanks,
Kroc.

obviously, that is wrong.
It is true that the ATINP value for batches which have a reference field in CT04 does not ever change but having a reference field does not necessarily mean that it should be display mode.
Anyone know why the reference field stops the ATINP field update?
And how does the program know that it should be 'not ready for input' when the ATINP flag is not changed?
Thanks.

Add a custom field to Business Partner(master data screen)

Hi MM experts,
My requirement: Basically have to pass special accounting number (from FI module to MM module ). For that, we need to create new custom field in the standard screen (master data) of business partner.
How to achieve this?
Is that by creating field exit (create a new field in the standard screen and updating business partner master data with this special accounting number)? IF so, could you please explain how to achieve this little bit clearly?
THANKS IN ADVANCE... YOUR INPUT IS HIGHLY APPRECIATED.

Hello Solemn,
You should catch the FormLoad event of form 134 (Business Partner), and add a static text and editbox. In addition, you need to do the data binding right after adding the item.
Or, you just use the standard UDF function of B1.
Hope this helps,
Nick

How to Add new fields in Cost element Master data transaction: KA01/02/03?

New fields ZORGUNIT(CHAR 4) is needed to be added in a separate tab. The data should be updated in cost element master data trx.

>
Sr!^^ wrote:
> Hi
>
> try with PM01
Is there any relevancy in your answer?
Have you read the question?

Which table of field "EXTENSION1" of vendor master data

Hi Experts,
I key in data in filed "EXTENSION1" (data line) for vendor master data, which table I can get this field?
Thanks.

Use this trick I learned from an ABAP friend of mine. Has a little of trial and error in it but its really good.
1. Open 2 SAP windows
2. In window 1, Go to ST05
3. Activate Trace
4. Go to window 2, access the field which you need to learn what table it is in. Ex. Go to XK02 to view the field. enter data in it.
5. Go to window 1, Deactivate Trace
6. In window 1, display trace
7. Check each table written there in SE11 and see if your field is in that table.

How to set default field values in customer master data.

hi,
I want to set default values in customer master data (account group wise).
but
I don't know how to set it .
please help me.
(I don't want to change field status in account group rather than I want to set default values for field. )
thank you.

hi,
this is to inform you that,
in SAP there is no such a provision.
but
in LSMW there is an option of CONSTANT VALUES.
check in SHD0 - also
please check and confirm
balajis\a

How to create new field groups in AA master data screen layout?

Hello,
We are using ECC 6.0
We have created bunch of new fields for asset master data, but we want to make them visible only for particular asset class. So we need to customize in SPRO Asset Master Data Screen Layout, but there no specific field groups that we can customize. So how to create and add new field groups to manage them by radiobuttons Required, Optional, No or Display?

hi,
think, it's not possible.
look here:
http://help.sap.com/saphelp_47x200/helpdata/en/4f/71e05a448011d189f00000e81ddfac/frameset.htm
"The field groups and their respective fields are defined in system tables"
kind regards
Andreas

Recon acct ready to input field- in G/L Master data

Similar Messages

Maybe you are looking for