Reconcilation failed ... its urgent
Hi all,
Reconcilation on AD resoure is faling.
I have gone through the all suggested solutions but no luck.
so ,Is it possible to reconfigure the resoure? and then try for reconcilation?
What is the error you're getting? You might try running the system log report to see what's going on. Sometimes that report will show more information than the regular reconciliation status page.
Similar Messages
-
Process chain problem...., its urgent
Hi all
in my process chain we are loading 4 loads into ODS. After 3 loads, 4th load didn't take place. its not yet started even 3rd one successfully ran. its not showing error also. what can i do. after 4th one ODS activation process is there.
Please advice me. will i go for manual loading. if i do manual, what abt activation after 4th load. will i do activation also manual or else it will trigger automatically as part of process chain........../
Advice me frnds..., its urgent
Regards
swethaHi Swetha,
Sometimes, it doesn't help to just set a request to green status in order to run the process chain from that step on to the end.
You need to set the failed request/step to green in the database as well as you need to raise the event that will force the process chain to run to the end from the next request/step on.
Therefore you need to open the messages of a failed step by right clicking on it and selecting 'display messages'.
In the opened popup click on the tab 'Chain'.
In a parallel session goto transaction se16 for table rspcprocesslog and display the entries with the following selections:
1. copy the variant from the popup to the variante of table rspcprocesslog
2. copy the instance from the popup to the instance of table rspcprocesslog
3. copy the start date from the popup to the batchdate of table rspcprocesslog
Press F8 to display the entries of table rspcprocesslog.
Now open another session and goto transaction se37. Enter RSPC_PROCESS_FINISH as the name of the function module and run the fm in test mode.
Now copy the entries of table rspcprocesslog to the input parameters of the function module like described as follows:
1. rspcprocesslog-log_id -> i_logid
2. rspcprocesslog-type -> i_type
3. rspcprocesslog-variante -> i_variant
4. rspcprocesslog-instance -> i_instance
5. enter 'G' for parameter i_state (sets the status to green).
Now press F8 to run the fm.
Now the actual process will be set to green and the following process in the chain will be started and the chain can run to the end.
Of course you can also set the state of a specific step in the chain to any other possible value like 'R' = ended with errors, 'F' = finished, 'X' = cancelled ....
Check out the value help on field rspcprocesslog-state in transaction se16 for the possible values.
Try this solution with your 3rd ODS..hope this will solve your problem for this instance. This is just a workaround.
Before next scheduel of the process chain..remove the link between 3rd ODS and 4th ODS and then reconnect once again and activate the process chain and schedule it as per your schedule cycle. From next upload onwards everything works fine.
Assign points if it is helpful.
Regards,
Sreedhar -
Routine--- help its urgent.
hai gurus,
Here is the scenario.
I am extracting the data from r/3.There is one field called "ITM_DESCRIPTION" in this i am gettting an # char only for single record and due to this delta loads are getting failed.
we had already wriiten the code for eliminating # for that field but dont know its not working. So i am planning out to skip that particular record for a particular Purchase order number.
Is there any such code to eliminate the particular record.
Many thanks in advance.
any one has the code plz send the code.
Help its urgent.
full points assured
regards
KPhai Oscar,
I had already done this one.
still geting the same problem.
can u send me any code that i can add in SR of TR.
regards
Kp -
Workspace error.pls its urgent
Hi All,
I have installed hyperion 11.1.1.2 version.When I have configured workspace,I am getting the following error"Register with shared services status is failed"
Anyone could help me for this.
Please its Urgent for me.
Many thanks to all
selvahmmmm... this is a forum... not an online training portal....
You can google and find out how to create JSP(stepwise)
http://java.sun.com/products/jsp/docs.html -
Its urgent:plz tel me what is the steps move to produection oaf page.
Hi All,
I developed one oaf page.that page move to production.
i already move to produection but its not working fine.
its throw an error.
plz tell me what is the steps follow when move to production.
oracle.apps.fnd.framework.OAException: Application: FND, Message Name: FND_NO_REGION_DATA. Tokens: REGIONCODE = /wnsgs/oracle/apps/ap/agingbuckets/webui/AgingBucketsPG;
at oracle.apps.fnd.framework.webui.JRAD2AKMapper.getRootMElement(JRAD2AKMapper.java:529)
at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.getWebBeanTypeDataFromJRAD(OAWebBeanFactoryImpl.java:3719)
at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.getRootApplicationModuleClass(OAWebBeanFactoryImpl.java:3452)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1005)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:508)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:429)
at oa_html._OA._jspService(_OA.java:85)
at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
at oracle.jsp.JspServlet.service(JspServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
at oracle.jsp.provider.Jsp20RequestDispatcher.forward(Jsp20RequestDispatcher.java:162)
at oracle.jsp.runtime.OraclePageContext.forward(OraclePageContext.java:187)
at oa_html._RF._jspService(_RF.java:102)
at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
at oracle.jsp.JspServlet.service(JspServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
at org.apache.jserv.JServConnection.processRequest(JServConnection.java:456)
at org.apache.jserv.JServConnection.run(JServConnection.java:294)
at java.lang.Thread.run(Thread.java:534)
## Detail 0 ##
Exception:
oracle.adf.mds.MetadataDefException: Unable to find component with absolute reference = /wnsgs/oracle/apps/ap/agingbuckets/webui/AgingBucketsPG, XML Path = null. Please verify that the reference is valid and the definition of the component exists either on the File System or in the MDS Repository.
at oracle.adf.mds.internal.MetadataManagerBase.findElement(MetadataManagerBase.java:1350)
at oracle.adf.mds.MElement.findElement(MElement.java:97)
at oracle.apps.fnd.framework.webui.JRAD2AKMapper.getRootMElement(JRAD2AKMapper.java:503)
at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.getWebBeanTypeDataFromJRAD(OAWebBeanFactoryImpl.java:3719)
at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.getRootApplicationModuleClass(OAWebBeanFactoryImpl.java:3452)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1005)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:508)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:429)
at oa_html._OA._jspService(_OA.java:85)
at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
at oracle.jsp.JspServlet.service(JspServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
at oracle.jsp.provider.Jsp20RequestDispatcher.forward(Jsp20RequestDispatcher.java:162)
at oracle.jsp.runtime.OraclePageContext.forward(OraclePageContext.java:187)
at oa_html._RF._jspService(_RF.java:102)
at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
at oracle.jsp.JspServlet.service(JspServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
at org.apache.jserv.JServConnection.processRequest(JServConnection.java:456)
at org.apache.jserv.JServConnection.run(JServConnection.java:294)
at java.lang.Thread.run(Thread.java:534)
Exception:
oracle.adf.mds.MetadataDefException: Unable to find component with absolute reference = /wnsgs/oracle/apps/ap/agingbuckets/webui/AgingBucketsPG, XML Path = null. Please verify that the reference is valid and the definition of the component exists either on the File System or in the MDS Repository.
at oracle.adf.mds.internal.MetadataManagerBase.findElement(MetadataManagerBase.java:1350)
at oracle.adf.mds.MElement.findElement(MElement.java:97)
at oracle.apps.fnd.framework.webui.JRAD2AKMapper.getRootMElement(JRAD2AKMapper.java:503)
at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.getWebBeanTypeDataFromJRAD(OAWebBeanFactoryImpl.java:3719)
at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.getRootApplicationModuleClass(OAWebBeanFactoryImpl.java:3452)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1005)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:508)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:429)
at oa_html._OA._jspService(_OA.java:85)
at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
at oracle.jsp.JspServlet.service(JspServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
at oracle.jsp.provider.Jsp20RequestDispatcher.forward(Jsp20RequestDispatcher.java:162)
at oracle.jsp.runtime.OraclePageContext.forward(OraclePageContext.java:187)
at oa_html._RF._jspService(_RF.java:102)
at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
at oracle.jsp.JspServlet.service(JspServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
at org.apache.jserv.JServConnection.processRequest(JServConnection.java:456)
at org.apache.jserv.JServConnection.run(JServConnection.java:294)
at java.lang.Thread.run(Thread.java:534)
thanks
Seshu.
Edited by: its urgent on Feb 8, 2012 2:31 AMDeployement steps:
1) Copy the Class files and move to into server
We can get class file >>F:\OAF\jdevhome\jdev\myclasses\imp
\myprojects
(imp) Load into server (java TOP) >>D:\oracle\viscomn\java\
2) Run the XML import Scripts in Command Prompt
F:\OAF\jdevbin\jdev\bin
For every Page and every Lov region
3) Next Go to apps
System administrator Create Function for a page
Description tab:
Function Name : IMP_STUDENT_REGISTRATION
User Function Name: Imp Student Registration
Description : Imp Student Registration
Properties Tab:
Type: SSWA JSP function
WebHTML Tab
Function:
HTML call: OA.jsp?page=/imp/oracle/apps/po/student/webui/ImpStudentResitrationPG
Note: DO the same for all the pages
4) Attach these Functions to Imp Student Operations menu to Imp Student Operations responsibility to User.
5) Bounce the apache.
Regards
Meher Irk -
PLZ ITS URGENT!!!!!!!!!!
hi i developed a smartforms......
in it i am using 'SSF_OPEN' and 'SSF_CLOSE' functions to suppress the print preview box which was coming again n again.....
firstly it was working properly bt i made some changes in my smartforms and then it started giving me the problem n giving the error after executing'Previous Output Request was not finished'...
plz help me out how to solve this problem....
PLZ ITS URGENT!!!!!!!!!!!!!!!!!
plz tell me anyone...........
Edited by: Pardeep Sharma on Dec 24, 2007 11:38 AM
Edited by: Pardeep Sharma on Dec 24, 2007 11:57 AM
Edited by: Pardeep Sharma on Dec 24, 2007 12:12 PMHi,
Is the requirement to supress the print preview or the dailog box containing the parameters for the print?
Regards,
Kk -
How to Fix the row in sap script, its urgent......
Hi Experts,
first i explain my sap script, i have print void check in my script client give readymade format means box are there, lines are there. i have to fix in box and line data form database table. everthing is working fine. i got all data. i have total 6 window in my script .but i have one issue In my sap script in header window total five rows... like below
Check voucher no:8888
check No: 1234
Date:1/28/2007
Bank:xyz
Batch no: 5678
now sometime check voucher is balnk....
Check voucher no: BLANK/NULL
check No: 1234
Date:1/28/2007
Bank:xyz
Batch no: 5678
because of that all rows are move up side and all window also move up side and so script not fix to the box and line all data are seen not perfectly... so guru`s how to fix the row and window in script....
its urgent...
Waiting for ur reply
Thanks & regards
JigarHi,
Follow the below steps . Definately your issue will bve resolved.
Let us suppose you are printing following fields
PH &v_text&
PH &v_text1&
PH &v_text2&
you will get the output as you expected.
and if you have any conditions for these fileds
/: if v_text is not initial.
PH &v_text&
/: endif
PH &v_text1&
PH &v_text2&
if you have data in each field then you will get output as expected .
But when v_text is initial.
the data will be moved up wnhich is happening in your case.
so what you need to do is?
/: if v_text is not initial.
PH &v_text&
/: else
PH (Here you need to mention empty line with same paragraph format
/: endif.
PH &v_text1&
PH &v_text2&
Reward points if useful
Regards,
Nageswar -
Hi All how to add new payscale for an employee in sap hr-abap,its urgent
Hi All ,
how to add new payscale for an employee in sap hr-abap,its urgent.
Message was edited by:
bharat kumar
Message was edited by:
bharat kumarHi
If that field which you wants to add is available in one of the structures like EKKO,EKPO then you can add that field just beside the other fields
If that field is not there in the any of the structures then you can define a variable using define command
/: DEFINE &VAR&
/ &VAR& = <some value>
or you can write subroutines to fetch the data from outside tables and can use those fields data in the script
<b>Reward points for useful Answers</b>
Regards
Anji -
Hi All,Please send me abap-hr material .Its urgent please.
Hi All,Please send me abap-hr material .Its urgent please.
These are the FAQ's that might helps you
http://www.sap-img.com/human/hr-faq.htm
http://www.sapgenie.com/faq/hr.htm
http://www.sapgenie.com/sapfunc/index.htm
http://www.sap-img.com/abap/sample-hr-reports-allocate-petrol-allowance.htm
http://www.sap-img.com/hr021.htm
http://www.sap-img.com/human/hr-faq.htm
http://www.sap-img.com/human/finding-the-list-of-hr-module-tables.htm
additional info......
Download the ABAP e-book for HR in the below link under the section 'Free ABAP eBook Download'
http://www.sap-img.com
Also have a look at the following links-
http://www.sapbrain.com/TUTORIALS/FUNCTIONAL/HR_tutorial.html
http://www.sapdevelopment.co.uk/hr/hrhome.htm
http://planetsap.com/index.htm
http://www.atomhr.com/library_full.htm
http://www.sap-basis-abap.com/saphr.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/60/d8d8c7576311d189270000e8322f96/frameset.htm
http://www.sapfriends.com/sapstuff.html
http://www.atomhr.com/know_preview/Reading_Payroll_Results_with_ABAP.htm
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci1030179,00.html?track=NL-142&ad=500911#Payroll
http://www.sap-press.com/product.cfm?account=&product=H967
http://www.sapdevelopment.co.uk/hr/payres_abap.htm
http://www.sapdevelopment.co.uk/hr/payres_tcode.htm
http://help.sap.com/printdocu/core/Print46c/en/Data/Index_en.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAPA/PAPA.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAPD/PAPD.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PYINT/PYINT_BASICS.pdf
http://www.atomhr.com/training/Technical_Topics_in_HR.htm
http://www.planetsap.com/hr_abap_main_page.htm
you can see some Standard Program examples in this one..
http://www.sapdevelopment.co.uk/programs/programshr.htm
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci1030179,00.html?Offer=SAlgwn12604#Certification -
Is it possible to export contacts from Outlook 2011 for Mac and importing this file back into Mac Address Book.? please reply me its urgent
Is it possible to export contacts from Outlook 2011 for Mac and importing this file back into Mac Address Book.? please reply me its urgent
-
Hey , why always when i want to update my Ipad to ios 6.1.3 at the end tills me that the update was failed , its always ,please if you can help me, and thank you.
Try disabling your firewall and antivirus software and see if that helps - if you are trying to update using iTunes on your computer.
-
HELP.
tried to update to ios 6.1 and it crashed my phone, plugged it into itunes like it told me to and it said i needed to restore it, so tried and it failed and it just keeps failing. its an iphone 4. what do i do?!it just says restore failed error 3194 but i can't find anything useful on google or anything i can understand, i don't get technology at all.
-
Hi All requirement on Purchase Order.Its Urgent
Hi All,
Pls provide me the soure code for the following requirement ASAP. Its urgent.
Program: Z_PO_PRINT_MAIL
Transaction: ZPOP
Purchase order number: (should be a parameter not a select option) (Code the lookup using search help MEKK)
Radio button for: 1. Print Preview
2. Print
3. E-mail
Additional parameters based on above selection:
1. No additional parameters needed
2. Printer (code the F4 to search printers)(default users default printer)
3. E-mail address, cc (should also have same validations as e-mail address)
Description:
On pressing enter, use the Purchase order number to look up vendor number and name and display either to the right or below the purchase order number.
Vendor Number: EKPO-LIFNR
Vendor Name: LFA1-NAME1
1. Print Preview: Use function ME_DISPLAY_PURCHASE_DOCUMENT with 2 parameters only:
I_EBELN = PO Number
I_PREVIEW = X
2. Print: For this we have to do a BDC.Use transaction ME9F. Enter the purchase order number, blank out the rest. Select the first message, hit Message details. Enter a new message via Edit>new Entries. For new entries, you will need to enter NEU for Output type with Medium 1 (Print output). Hit enter. Select the message and click on further data. Set dispatch time to 4. Green arrow back. Select the message and click on Communication method. Enter the Logical destination as the printer, select Print Immediately and Release after output. Green arrow back and save.
3. E-mail: Use the following function modules:
ECP_PO_OTF_CREATE
CONVERT_OTF_2_PDF
SO_NEW_DOCUMENT_ATT_SEND_API1Hi,
You can explore following link for more details;
http://www.sap-basis-abap.com/sapmo017.htm
http://www.erpgenie.com/sap/sapfunc/purchasing.htm
Bye,
Muralidhara -
Maximize Purchase Order -- Error -- Its Urgent!!!!
Hai To All,
Iam customizing Purchase Order Form. There iam adding one button near cancel button. If i maximum purchase order form i got the following error and SAP Application is closed.
The instruction at "0x77fcb333" referenced memory at "0x000c0101". The memeory could not be "written".
Click on OK to terminate the program
Click on CANCEL to debug the program
OK CANCEL
Can anyone help me........... Its Urgent
Regards,
Anitha
Edited by: ani nazir on Mar 27, 2008 11:43 AMHello Petr,
S where i change place also its showing error.
The following code i used to place the button
oItem = PO_Frm.Items.Add("rm", SAPbouiCOM.BoFormItemTypes.it_BUTTON)
oItem.Left = PO_Frm.Items.Item("2").Left + 75 '150 '
oItem.Width = PO_Frm.Items.Item("2").Width '65 'PO_Frm.Items.Item("51").Width
oItem.Height = PO_Frm.Items.Item("2").Height '20 '
oItem.Top = PO_Frm.Items.Item("2").Top + 10 '505 '
oItem.Visible = True
oItem.Enabled = True
Dim d As SAPbouiCOM.Button = oItem.Specific
d.Caption = "RateMaster"
Regards,
Anitha -
hi experts'
i have to generate asset utilization report in webdynpro
inputs for report are some rfcs
i get result from rfcs
i need to float report i used bussinessgraphic object
its not interactive
if i go for tables
how to create tables with drill down inside table
how to set color for each cell of table depending on condition
please help me
its urgent
and send me code n linkHi Vani,
Your requirement has many things
1. How to call RFCs
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/28113de9-0601-0010-71a3-c87806865f26?rid=/library/uuid/49f2ea90-0201-0010-ce8e-de18b94aee2d#15 [original link is broken]
2. Once you have data, how to work with BusinessGraphics ?
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ba2db0e5-0601-0010-9790-e271902f2c38
(This docs contatins all the required info on webDynpro UIElements)
3.Tables
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/28113de9-0601-0010-71a3-c87806865f26?rid=/library/uuid/49f2ea90-0201-0010-ce8e-de18b94aee2d#46 [original link is broken]
Regards,Anilkumar -
Lsmw issue plz help its urgent
Hi Experts ,
i need to create a LSMW using batch input .
but the requirement is on the basis of conditions my recording need to be changed .
dat means
3127POL09 3127POL09-1 CTR 3127-1003E 100 FUL
3127POL09 3127POL09-2 WBS 3127POL01 60 FUL
for ctr i ill have to post data in screen number 200
and for wbs i ill have to post data in screen number 400 .
can we put some conditions in recording in lsmw ?
i no we can create multiple recording but how can we use them to fullfill my requirement .
plz help its urgent
thanx in advanceHi,
Within LSMW, there is an option to write our own code wherein this code can be incorporated.
This is in the Field Mapping Option...
Just go to the Menu Extras->Layout
and click on the check box Form Routines
Global Data.
Here you can define Global Variables and also perform your ABAP Coding.
Regards,
Balaji.
Maybe you are looking for
-
Slow system when 1TB Store.E USB drive connected
HI, I bought a 1TB Store.E USB drive. After I installed the drive the whole system reacts very slow when the drive is access after not being use for a while. Is there a standby modus and if yes, can it be switched off? Regards Heinz
-
Can I set up Receivables in order to overapply a receipt?
I was wondering if is possible to set up Receivables somehow in order to be able to overapply a receipt? Example: A receipt is for $100. An invoice is for $200. I would like to be able to apply the amount and have a negative amount (-100) in the fiel
-
InDesign CS5.5 crashes when deleting empty pages. Help!
Hello all, I'm having an issue with InDesign CS5.5 running on 10.7.5. I have two empty spreads that I need to delete but everytime I try to, it prompts: "The affected pages contain objects. Delete the pages anyway?" I click Okay and InDesign crashes
-
Cost Items and Time Schedules in T&EM
I have created certain Cost Items and Time Schedules in Development Server. Transferred them to Testing. But I am unable to edit them or included new ones through tcodes in Testing Server. But my client wants to edit them or include new ones accordin
-
Cant boot up after the 10.4.9 update :(
Well, I too am now stuck, unable to boot after the 10.4.9 update. My problems are a bit different than others on this forum. When I boot up, I get the dong startup sound. Then it switches to the white screen with the apple logo. The spinner NEVER sho