Reconcile the data in sap bw and sap r/3

Hi Experts,
How to reconcile the data in SAP BW and SAP R/3?
Thanks,
Sathya

Pl read this:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/7a5ee147-0501-0010-0a9d-f7abcba36b14
Ravi Thothadri

Similar Messages

Verify the data between SAP R/3 and SAP BW

Hi Experts,
How to verify the data between SAP R/3 and SAP BW at the time of data mismatches in reports.
give me the proper solution.
Thanks,
Syam

Hello,
You must know what is the infoprovider source of the data shown in the report.
Once you know it, check the content filtering by same restrictions as in the mismatch report. Now you have the data in BW.
Then you have to know the proper transation or table in R/3, from where the extractor retrieves the data to populate the infoprovider; make same restrictions and compare it with data in BW.
Regards

Taking the data from interactive forms and load the data into SAP system?

hi all,
I want to know how to take the data from interactive forms and load the data into sap system?
if u have any sample scenario, explain with that.
thanks in advance
Raja

Hello,
Check the program...
SAPBC480_DEMO.
Check the below threads
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/88e7ea34-0501-0010-95b0-ed14cfbeb85a
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bfbcd790-0201-0010-679d-e36a3c6b89fa
Thanks
Seshu

Question on the flow of the data from SAP R/3 to SAP BW

hai bwgurus,
I am learner of sap bw ,i have small doubt in the extracting the data from sap r/3 to sap bw i.e
Extraction is always performed only on master data table not on transaction table , Am I right or wrong pls correct me with an detailed explanation ?
EmailId:[email protected]
Regards
Raju

Hi raju,
Extraction is always on Masterdata and as well as transaction data.
a transaction is event that ocurs on masters(like business example would be there will be a distributor who orders certain quantity of material so Disturbutor will be the companies sole distrubutor who comes under master and transaction data is the qty of materila he purchsed).All the transactions occur in SAP r/3 and that data will be replicated to BW for Data ware hosue and reporting.
Reg
Ram
""assign points if it helps""

How to retrieve the data from SAP database.

Hi Pals,
How to retrieve data from SAP R/3 System to my third party software. I will make my query little bit more clear. There is a list of assets entered and stored in the SAP system. For example 3 mobile phones.
1) Mobile 1- Nokia
2) Mobile 2 - Samsung
3) Mobile 3 u2013 Sony
Now think I do not know what all assets is there. I have to retrieve the data and get it on my third party software. Just display the list of assets. Lets say SAP XI is also there. Now how will I map it and get the details.
Please give me step by step method.
N.B: Just to read the data from SAP database.
Please make the flow clear step by step.
Thanking you
AK

Hi,
You can use RFC or ABAP Proxy to make synchronous call with SAP.
Under RFC or ABAP Proxy Program you can get the data from SAP tables. Direct access to SAP Database is not preferrable even if its possible.
The better way to go for RFC or PROXY.
You will send the request from Third party system and the it will be as input parameters from RFC/ Proxy it will response based on it.
This got it all..
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5474f19e-0701-0010-4eaa-97c4f78dbf9b
/people/siva.maranani/blog/2005/09/03/invoke-webservices-using-sapxi
/people/stefan.grube/blog/2006/09/21/using-the-soap-inbound-channel-of-the-integration-engine
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit - File to RFC
HTTP to RFC - A Starter Kit
/people/community.user/blog/2006/12/12/http-to-rfc--a-starter-kit
Refer
Thanks
Swarup
Edited by: Swarup Sawant on Jun 4, 2008 9:32 AM

How to retrieve the data from SAP-BAPI by using VB Code

Hi ,
I am new to BAPI.
V have created an application in Visual Basic with the following fields
EmpNo , EmpName, Addr1, Addr2, City and Phone (Only for Test)
We have written the code for SAVING the data into SAP. Already we have
constructed a table with the respective fields in SAP.
For that we ourself created our own BAPI Structure / Function Group /
Function Module/ Business Object - RELEASED related elements.
1)Established the connection successfully.
2)Stored the data into SAP Successfully and v r in need of
3)HOW TO RETRIEVE THE DATA FROM SAP (USING GETLIST.....GETDETAIL....)
Following is the code :
'BAPI Structure : ZBAPIEMP
'Function Group : ZBAPIEMP
'Function Module : ZBAPI_EMP_CREATEFROMDATA
'Business Object : ZBAPIEMP
'Function Module : ZBAPI_EMP_GETLIST
Dim bapictrl As Object
Dim oconnection As Object
Dim boEmp As Object
Dim oZEmp_Header As Object
Dim oImpStruct As Object
Dim oExpStruct As Object
Dim oreturn As Object
Dim x As String
Private Sub Form_Load()
Set bapictrl = CreateObject("SAP.BAPI.1")
Set oconnection = bapictrl.Connection
oconnection.logon
Set boEmp = bapictrl.GetSAPObject("ZBAPIEMP")
Set oZEmp_Header = bapictrl.DimAs(boEmp, "CreateFromData", "EmployeeHeader")
Set oImpStruct = bapictrl.DimAs(boEmp, "GetList", "EmployeeDispStruct")
End Sub
Private Sub cmdSave_Click()
    oZEmp_Header.Value("EMPNO") = txtEmpNo.Text
    oZEmp_Header.Value("EMPNAME") = txtEmpName.Text
    oZEmp_Header.Value("ADDR1") = txtAddr1.Text
    oZEmp_Header.Value("ADDR2") = txtAddr2.Text
    oZEmp_Header.Value("CITY") = txtCity.Text
    oZEmp_Header.Value("PHONE") = txtPhone.Text
    boEmp.CreateFromData EmployeeHeader:=oZEmp_Header, Return:=oreturn
    x = oreturn.Value("Message")
    If x = "" Then
        MsgBox "Transaction Completed!..."
    Else
        MsgBox x
    End If
End Sub
Private Sub cmdView_Click()
End Sub
COULD ANYBODY GUIDE ME, HOW TO RETRIEVE THE DATA FROM BAPI, FOR THE WRITTEN CODE.

I didn't seen any other answers but here's how it's been done previously in our organization for a custom BAPI. In this example, we give material and language to return the part description. It's not specific to your project but may give you ideas..
-Tim
Option Compare Database
Dim SAPLOGIN As Boolean
Dim FunctionCtrl As Object
Dim SapConnection As Object
Sub SAPLOGOUT()
On Error GoTo LogoutFehler
    SapConnection.logoff
    SAPLOGIN = False
Exit Sub
LogoutFehler:
    If Err.Number = 91 Then
        Exit Sub
    Else
        MsgBox Err.Description, vbCritical, "Fehler-Nr." & CStr(Err.Number) & " bei SAP-Logout"
    End If
End Sub
Function SAPLOG() As Boolean
'Verbindungsobjekt setzen (Property von FunctionCtrl)
   Set FunctionCtrl = CreateObject("SAP.Functions")
   Set SapConnection = FunctionCtrl.Connection
'Logon mit Initialwerten
   SapConnection.Client = "010"
   SapConnection.Language = "EN"
   SapConnection.System = "PR1"
   SapConnection.SystemNumber = "00"
   'SapConnection.Password = ""
   SapConnection.GroupName = "PR1"
   SapConnection.HostName = "168.9.25.120"
   SapConnection.MessageServer = "168.9.25.120"
     If SapConnection.Logon(0, False) <> True Then 'Logon mit Dialog
         Set SapConnection = Nothing
         DoCmd.Hourglass False
         MsgBox "No connection to SAP R/3 !"
         SAPLOGIN = False
         SAPLOG = False
         Exit Function
      End If
    SAPLOG = True
End Function
Function MatDescr(MatNr As String)
Dim func1 As Object
Dim row As Object, X As Integer, ErsteNr As String
Dim DatensatzZähler As Long
Dim RowField(1 To 50, 0 To 1) As String, RowLine As Long
    If Not SAPLOGIN Then
        If Not SAPLOG() Then
            MsgBox "No connection to SAP !", 16
            SAPLOGOUT
            Exit Function
        End If
    End If
' Instanziieren des Function-Objektes
Set func1 = FunctionCtrl.Add("Z_BAPI_READ_MAKT")
' Export-Paramter definieren
func1.exports("MATNR") = MatNr
func1.exports("SPRAS") = "EN"
DoEvents
If Not func1.call Then
    If func1.exception <> "" Then
        MsgBox "Communication Error with RFC " & func1.exception
    End If
    DoCmd.Hourglass False
    SAPLOGOUT
    Exit Function
Else
MatDescr = func1.imports("MAKTX")
End If
If MatDescr = "" Then
    MatDescr = "PART NO. NOT FOUND"
End If
End Function

Getting an error in while transfer the data to SAP

Hello Everyone,
I am getting an error
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="MAPPING">JCO_COMMUNICATION_FAILURE</SAP:Code>
<SAP:P1>Error opening an RFC connection.</SAP:P1>
when i was transfing the data to SAP R/3.
But i found the error In SM59 , TCP IP connections ,
AI_DIRECTORY_JCOSERVER , AI_RUNTIME_JCOSERVER and SAPSLDAPI are failed to connect.
ERROR                program AI_DIRECTORY_SXI not registered
LOCATION             SAP-Gateway on host starxi / sapgw00
DETAIL               TP AI_DIRECTORY_SXI not registered
COMPONENT            SAP-Gateway
COUNTER              15736
MODULE               gwr3cpic.c
LINE                 1621
RETURN CODE          679
SUBRC                    0
RELEASE              640
TIME                 Sun Oct 12 16:23:18 2008
VERSION              2
How to register these program?
Can any one please help me.
Thanks
Subash.

Did you create the entry for this in the J2EE visual admin -> Cluster -> Server -> Services -> JCo RFC Provider ?

How we will pull the data from Sap-Bi to sap-Bpc

Dear Experts,
Thanks for watching this thread.The whole data is available in SAP-BI.
My system environment is SAP-BPC MS7.5.
Now i want to load the data from Sap-Bi to Sap-Bpc ms.For that we need any Interfaces.
How we will pull the data from SAP-BI to BPC-MS for Master data and Transaction Data.
could you please provide me step by step guide.
Please guide me what should i do.
Regards,
Srinivasan.
Edited by: srinivasan.singari on Jul 22, 2011 8:20 AM

Tough Ask..
Because i have done dashboarding thru scritping (Dyanamic fashion tough) ..It is very good ..But when, coming to the one you asked i have the idea how it works but cannot really tell you wich would be better.
Each Route has its own limitations.That really depends on what exaclty your client is looking after..
So if you new to xcelsius and eager to learn ..I suggest you to give a go at all those..May be you can let me know wich is the best one..
1. QAWS,
2. Bex Query --> Crystal Reports --> Live office --> DashBoard.
3. Bex Query --> WebI --> Live Office --> Dashboard..
4. Webservices consuming BI Query,
5. Xcelsius SAP Netwever Connector.
But i suggest as of now use Xcelsius SAP netweaver Connnection...

How to save the data to sap abap using Adobe Flex

Hi Everybody......
I am new to Adobe flex with sap abap.
      How to save the data in sap abap using Adobe Flex coding is Action Script and using RFC web service.
Please give me any suggisions on that.
Thank you
Venkatesh V

Hi Venkatesh,
Try with folowing coding...
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute"
     initialize="initApp()">
     <mx:Label x="10" y="23" text="Airline" width="90" id="lblAirline"/>
     <mx:TextInput x="108" y="21" id="txtAirline"/>
     <mx:Button x="10" y="49" label="Get Data" id="btnGetData" enabled="false" click="getData()"/>
     <mx:DataGrid x="10" y="97" id="dgFlightData" dataProvider="">
     </mx:DataGrid>
       <mx:Script>
          <![CDATA[
               import mx.collections.ArrayCollection;
               import mx.rpc.AbstractOperation;
               import mx.rpc.events.FaultEvent;
               import mx.rpc.soap.LoadEvent;
               import mx.rpc.events.ResultEvent;
               import mx.rpc.soap.WebService;
               [Bindable] public var flightData:ArrayCollection;
    private var flightWS:WebService;
     private function initApp():void{
          flightWS = new WebService();
          flightWS.wsdl = "http://uscib20.wdf.sap.corp:50021/sap/bc/soap/wsdl11?services=ZGTEST&sap-client=000";
        flightWS.addEventListener(FaultEvent.FAULT,onWSError);
          flightWS.addEventListener(LoadEvent.LOAD,onWSDLLoaded);
         flightWS.addEventListener(ResultEvent.RESULT,onFlightWSGotResult);
          flightWS.loadWSDL();
private function getData():void{
          var operation:AbstractOperation = flightWS.getOperation("ZGTEST");
          var input:Object = new Object();
          input.Airline = txtAirline.text.toUpperCase();
          operation.arguments = input;
          operation.send();
     private function onWSError (event:FaultEvent):void{
     private function onWSDLLoaded(event:LoadEvent):void{
          btnGetData.enabled = true;
     private function onFlightWSGotResult(event:ResultEvent):void{
          flightData = event.result.SFLIGHT;
          ]]>
     </mx:Script>
</mx:Application>
Regards,
Vinoth

Validate the data for SAP system

How do you validate the data for SAP receiver system (RFC or IDOC adapter)?
It is necessary to recognize does exists reference object or does field has the right value.
Do you validate it in BPM or you handle application/technical acnowlegment? Or Messaging monitoring is enough for your requirements.
In case of ABAP Proxy will it enough to catch Fault Message in order to define what happens?

Hi,
there are two different kinds of validations:
syntactical validation (length and data types of fields etc.) and semantical validations (correct customer in order, allowed number range etc.)
From a theoretical point of view, only the first kind should be carried out in XI, all semantical validations should be part of the backend inbound processing. And indeed for IDocs and RFCs you will get according error messages in the backend. If you call proxies, you will need to code that yourself.
In General i'd implement syntactical validations in XI, if more a necessary then XI already carries out (e.g. mandatory fields filled). For data validations i would rely on the backend, meaning for IDocs you should look into using ALEAUD IDoc, which will return any error messages during IDoc inbound processing. For RFCs you can have Exceptions defined which will translate to a negative application ACK.
Regards
Christine

How to upload the data to SAP-DMS(Document Management System)

Dear sir,
How to upload the data to SAP-DMS (Document Management System) please give me the code for this .ex for (excel format or tab deliminated) to sap system through BAPI i have to pass.
regards
R M Patil

Hi,
May be following link may help you.
/thread/315373 [original link is broken]
/message/205534#205534 [original link is broken]
Thanks,
Sree.

What are the data elements of 0material and 0customer

Hi,
What are the data elements of 0material and 0customer??
Thanks

Hi.......
Dataelement for 0MATERIAL is MATNR
Dataelement for 0CUSTOMER is KUND1
Check these links :
http://help.sap.com/saphelp_nw04/helpdata/en/df/3ff438520e6a71e10000000a11405a/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/0a/802e1c120511d4973900a0c930e0da/frameset.htm
Hope this helps you......
Regards,
Debjani......

Pull the data from Azure sql and load into the on premises data base

Hi friends,
I have small requirement here, I have to pull the data from Azure sql and load it to the on premises data base.
I am using Azure sync process to do that, but it will take so much time to do that..
I know that azure have some limitations, is there any other way to do this..
Please help me on this...

Hello,
Check the program...
SAPBC480_DEMO.
Check the below threads
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/88e7ea34-0501-0010-95b0-ed14cfbeb85a
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bfbcd790-0201-0010-679d-e36a3c6b89fa
Thanks
Seshu

My performance is very slow when I run graphs. How do I increase the speed at which I can do other things while the data is being updated and displayed on the graphs?

I am doing an an aquisition and displaying the data on graphs. When I run the program it is slow. I think because I have the number of scans to read associated with my scan rate. It takes the number of seconds I want to display on the chart times the scan rate and feeds that into the number of samples to read at a time from the AI read. The problem is that it stalls until the data points are aquired and displayed so I cannot click or change values on the front panel until the updates occur on the graph. What can I do to be able to help this?

On Fri, 15 Aug 2003 11:55:03 -0500 (CDT), HAL wrote:
>My performance is very slow when I run graphs. How do I increase the
>speed at which I can do other things while the data is being updated
>and displayed on the graphs?
>
>I am doing an an aquisition and displaying the data on graphs. When I
>run the program it is slow. I think because I have the number of
>scans to read associated with my scan rate. It takes the number of
>seconds I want to display on the chart times the scan rate and feeds
>that into the number of samples to read at a time from the AI read.
>The problem is that it stalls until the data points are aquired and
>displayed so I cannot click or change values on the front panel until
>the updates occur on the graph. What can I do to be a
ble to help
>this?
It may also be your graphics card. LabVIEW can max the CPU and you
screen may not be refreshing very fast.
--Ray
"There are very few problems that cannot be solved by
orders ending with 'or die.' " -Alistair J.R Young

How to read the data from Excel file and Store in XML file using java

Hi All,
I got a problem with Excel file.
My problem is how to read the data from Excel file and Store in XML file using java excel api.
For getting the data from Excel file what are all the steps i need to follow to get the correct result.
Any body can send me the code (with java code ,Excel sheet) to this mail id : [email protected]
Thanks & Regards,
Sreenu,
[email protected],
india,

If you want someone to do your work, please have the courtesy to provide payment.
http://www.rentacoder.com

Reconcile the data in sap bw and sap r/3

Similar Messages

Maybe you are looking for