Reconciliation key within SAP FS-CD

Dear all,
Once a reconciliation key has been closed and all CD bookings have been posted into FICO I was wondering if there is a transaction code to reverse the reconciliation key and as well at the same reverse the postings that have made in SAP FICO
Is this possible at all within SAP FS-CD?

Latifaa:
If the original postings are not correct, then they should be reversed, not the reconkey.  But you can reverse the key transfer with txn FPG8.  After reversal, the key will need to be re-transferred so the underlying postings will remain in effect.
regards,
bill.

Similar Messages

  • Loans document error Document header does not have a reconciliation key

    Hi All,
    I am trying to post a loans document through EK25 and while saving the document following erros is coming
    Formal error: Document header does not have a reconciliation key
    Message no. >0037
    Diagnosis
    You tried to post a document but a reconciliation key is missing from the document header. Since mass processing does not apply here (where the reconciliation key is automatically created) you must enter a reconciliation key.
    System Response
    Error message. Processing is terminated.
    Procedure
    Contact your system administrator.
    Procedure for System Administration
    If the program error occurred in an
    SAP standard program, enter a problem message
    Own program, correct the program
    Any input appreciated.
    Thanks,
    VR

    Hi,
    You need to assign the reconcilation group to the SAP user ID you are using to post the loan document.
    The reconciliation group is required if user-specific reconciliation keys are to be proposed automatically.
    The reconciliation group is freely selectable.
    Go to the following path in IMG-
    IMG->Financial Accounting->Contract Accounts Receivable and Payable->Basic Functions->Postings and Documents->Document-.Define Default Values->Maintain Rules for Reconciliation Key Default Values->Maintain Reconciliation Groups for Default Values
    Maintain the SAP User ID that you are using along with a reconciliation group.
    After, you maintained the user ID and saved it, try to post the loan document again.
    Hope it helps..
    Thanks,
    Amlan

  • Un-reconciled Report within SAP

    Hello,
    I am wondering if there is a standard report within SAP which shows all un-reconciled transactions for a particular bank as of a certain date?
    I have tried running the following: Banking  Bank Statements and External Reconciliation  Manual Reconciliation. However this doesn't appear to give me what I want.
    Regards,
    Juan

    Hi Juan,
    Do you want to see unreconciled transactions on a GL/bank account or transactions on a bank account?
    Unreconciled transactions can be viewed on the GL's account balance.
    If you want to see the transactions that have gone thru on a bank account, you would use the External Reconciliation as you indicated. You would select the transactions that are showing on your bank statement; the remaining entries are the outstanding entries that have not gone thru that bank account.
    Heather

  • FS-CD reconciliation key

    Dear all,
    Is there a transaction code in SAP FS-CD whereby I can see which reconciliation keys have not been processed successfully.
    Kind regards

    Why don't you check FPG4.
    Automatic Reconciliation Key Closing
    The program reads reconciliation keys that are still open according to the selection criteria. All keys that are not reserved for a specific group of postings (for example, postings to a payment lot, a returns lot, a payment run, ...), are closed.
    In addition, keys that are reserved for posting billing documents from SD are read.
    If necessary, you can also delete reconciliation keys that have been created but are not used. To do this, select the parameters Delete Unused Open Keys or Delete Unused Closed Keys.
    -- choose Processing mode as Test Run and it will display all the reconciliation which are open.

  • Dunning Activity FPVB - Document No - Reconciliation Key

    I would like to know how SAP system determines document number for late payment charge documents and reconciliation key for those late payment charge documents during dunning run FPVB.
    I wonder whether there are any customization for that or FPVB is calling any particular FM for that.
    Thanks in advance

    Thank you William for such a precise answer.
    I am having a peculiar problem during dunning activity run FPVB. I ran a dunning proposal with following parameters:
    DateID :  05/20/2011
    Identifcation :  FPVA1
    SAP suggested by default following dunning parameters :
    Date of Issue :  05/20/2011
    Reconciliation Key : 11140FPVA1
    After completion of dunning run, we got late payment charge documents. Out of those documents, some documents took reconciliation key same as it's document no. (as follows) :
    ..._DateID_  ........          Identification      ............ Document No.   ..........  Rec. Key
    05/20/2011........ FPVA1    ............    342076625 ............ 11140FPVA2AN
    05/20/2011........FPVA1     ............     329388504 ............ 000329388504   (Rec key same as document no.)
    05/20/2011........FPVA1    ............   329546609 ............ 000329546609   (Rec key same as document no.)
    05/20/2011........FPVA1      ............  349378503  ............ 11140FPVA2AM
    ....... and so on
    Now I don't understand why it is taking reconciliation key same as document no. And why those document numbers are random and not sequential.
    Edited by: Poddar Anujit on May 27, 2011 11:19 PM

  • RECONCILIATION KEYS

    Does anyone knows how to transfer closed rec keys (Contract Accounting) to G/L. Here the situation is that there were some rec keys which were closed formonth of september but the posting date on them is not right and needs to be changed. Before transferring into G/L,we need to change the posting date of the rec keys. How do we change them once the reconciliation key is closed. I have been looking for the answer but no one has replied. Please if someone has worked in FI-CA, Iam sure that eprson can answer my question.
    THanks
    Lakshmi

    Hi,
    SAP Easy Access Menu: Utility Industry u2192 Contract Accounts Receivable and Payable u2192 Periodic Process u2192 Forward Postings u2192 Preparation u2192 Delete and Close Reconciliation Key (Transaction FPG4)
    This transaction allows the utility to close a range of reconciliation keys in one transaction. In addition keys which have been opened, but not used, can be closed and deleted in this process.
    once key closed it will be blocked for further transactions.
    Regards,
    Harshal

  • Reconciliation key status - Correction levels

    Guten tag allein,
    I have transferred FIKEYs through FPG1 and then run FPT1.
    After which I am getting status in
    1. Status in FPT4 shows as "OPEN" and FPF3 as " Correction level 01 not yet transferred "
    2. Status in FPT4 shows as "Adjustment Records not Transferred" and FPF3 as " Correction level 01 not yet transferred " .
    3.  Status in FPT4 shows as "Transfer of Incomplete Adjustm.Records" and FPF3 as " Correction level 02 not yet transferred ".
    Could anyone guide what is way forward for status of above mentioned each item i.e. action points for handling these items.
    Quite honestly, sufficient documentation is not available to troubleshoot this.
    Regards,
    Paresh
    N.B. How to reward forum points as against each genuine answer forum points shall be given.

    Hello thepathless,
    firstly, helpful informations to the compare reports you can find in each report, if you press the button "information".
    The report RFKKABS1 (tr. FPT1) and the report RFKKGL20 (tr. FPG2) contains a repair option, if you set the flag "correction run". Exist differences in your system, the report RFKKOP10 (tr. FPO2) shows red traffic lights you should check the
    reconciliation keys with the both reports RFKKABS1 and RFKKGL20 (without mark the flag correction run), then you must find
    the reason for the differences (create an message to sap), after this is it possible to start the correction run. To start the correction reports the rec. key must have the status "close", if the flag "correction run" is marked a correction will be execute and this correction must be also transfer to FI-GL via FPG1.
    Please attend that if you start the reports  as correction run, without to remove the source reason you can get further inconsistencies and the removal of such errors is quite difficult!
    To your question:
    you wrote that you transfered FIKEYs through FPG1 and then run FPT1.
    What was the output of compare report RFKKABS1 - differences?
    I think you has start the correction run for one fikey, which had differences, but the correction wasn't transfered to FI-GL
    --> status: FPF3 Correction level 01 not yet transferred
                      FPT4 Adjustment Records not Transferred
    --> correction level 02 means, the second correction
    --> I hope this isn't the production system!
    You should schedule regulary the report RFKKOP10 (Reconcile open items) in a time where no postings take place and all existing fikeys are closed and transfered. The traffic lights should be green, not red. Have you red lights start the compare
    reports (see above) without correction run.
    I hope I could help you with this informations.
    Christiane

  • EWA for Business Objects (XI 3.1) within SAP Solution Manager

    Hello!
    We use Business Objects (XI 3.1) and would like to get weekly a EWA report within our SAP Solution Manager.
    Our SAP Solution Manger has only ABAP stack and it has the SPS version 25.
    We also do not use Wily Introscope/Diagnostics and E2E tools within SAP Solution Manager.
    Question
    Is it possible to set up EWA for Business Objects with our requirements (SOLMAN with ABAP stack and without E2E/Diagnostics tools)?

    Hello,
    The short answer is no. You can verify this in SAP Note  1507629  - Preparing a BOE system for Service Sessions in Sol. Manager.
    "...1.) Managed System Setup
    Perform the Managed System Setup for SAP BusinessObjects Enterprise as
    described in the "End-to-End Root Cause Analysis System Landscape Setup
    Guide". This guide can be found in the SAP Service Market Place:
    -> http://service.sap.com/diagnostics
        -> Navigate to the "Media Library"
           -> Open the document "SAP Solution Manager Landscape Setup Guide"
    Please ensure that you perform all steps mentioned in the guide which
    are relevant for your product and version. Please read also SAP note
    1357901, which is also referred to in the above mentioned setup guide."
    So this is a requirement. There are also pdf documetns attached to this note  that describe how to setup the EWA in Solution Manager. EGI_SBOP_EWA_part1.pdf and EGI_SBOP_EWA_part2.pdf.
    The fact you have no Java stack and have not installed Diagnostics, just means it has not been done. It can be done and then you can do a managed system setup, and the balance of tasks required to prepare the system and Solution manager to generate EWA reports for the BOE system. Its just more work, not a show stopper.
    Regards,
    Paul

  • Possibility to execute Acrobat Pro's "Combine files into PDF" function from within SAP?

    Good day.
    Presently, a company uses Acrobat Pro to manually combine files such as *.pdf, *.jpg, *.doc, which have been downloaded from SAP's Document Management System, into one pdf file. I would like to know if it is possible to automatically execute Acrobat Pro's "Combine files into PDF" function from within SAP (ECC 6.0) application system. I'm wondering if this could be achieved from a program via OLE (Object Linking and Embedding) or RFC (remote function call).
    Thanks in advance for your thoughts and inputs.

    Yes, you can combine PDF files via IAC/COM methods.

  • Monitoring of jobs within SAP

    Hi,
    Can anyone tell me the ways of monitoring jobs within SAP. Please provide me some details..
    Thanks..
    Swetha.

    Hi ,
      In SM36, Background jobs can be created.
      These Jobs can be monitored in SM37.
      Pl.reward if useful.
    Thanks,
    USR

  • Using Document Management within SAP

    Hi,
    I'm relatively new to SAP and need to have some information about using the Document Management Services within SAP.  As with other ERP products there are drawbacks to allowing this functionality such as disk space concerns, upgrades, performance issues.  Based on some other threads I've read about this it looks like some of the options can be disable to eliminate some of the disk space concerns. 
    Could anyone point me to a good document that describes Document Management Services and the benefits/drawbacks?  I would also be extremely interested in personal experiences of why you would and wouldn't use it.
    Thanks,
    Julie

    Hi, Julie
    Purpose;
    The Document Management Service (DMS) is a service of the information management infrastructure provided by the Knowledge Provider within the framework of SAP Web Application Server. The central task of the DMS is to process documents and document-like objects on the basis of application-specific content models. Only the DMS can modify document administration data and save this data in a storage medium, such as the SAP database.
    Implementation Considerations;
    In order to use the DMS, you need to implement some Customizing steps. For details, see the Implementation Guide (IMG) under the following path: SAP Web Application Server ® Basis Services ® Knowledge Provider ® Document Management Service. The IMG modules contain details on the individual Customizing activities.
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/1a/aea9375d79fb7de10000009b38f8cf/frameset.htm
    Also go through these urls for further information
    DMS
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/04/92713a46f311d189470000e829fbbd/frameset.htm
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/c1/1c31a243c711d1893e0000e8323c4f/frameset.htm
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/bd/8063fbbc43c54e901dd7733d946198/frameset.htm
    Benkaraj
    ??P
    Edited by: benaka rajes on Jul 23, 2009 11:42 AM

  • Reconciliation Key in FICA

    Can anyone tell me if it is possible to reopen a closed reconciliation key that has NOT been transferred to the General Ledger?

    You closed the reconciliation key for postings but have not transferred it to FI.
    Use transaction FPG1 to transfer to FI.

  • Adobe Flex within SAP NetWeaver Developer

    Hello,
    I can't find Adobe Flex within SAP NetWeaver Developer Studio.
    I am using  Version: 7.0.09
    Build id: 200608262203
    Is it necessary to download additional software for it?
    Regards
    sas

    Hi
    NetWeaver provides the ability to develop portal content without programming through Visual Composer (Outside-in approach).
    SAP NETWEAVER VC
    • Visual Composer is a visual modeling tool that enables sophisticated
    content development for the SAP NW Portal merely by dragging and
    dropping appropriate objects and establishing relationships between them.
    No programming required.
    • Visual Composer is completely Web based. Business experts can sit next to
    the business users and access Visual Composer from any machine to build or
    customize to reflect the business needs on demand
    • The purpose of Visual Composer is to provide a visual tool that enable
    customers quick and easy content development thereby
    – Minimize the time and effort to create content
    – Lead to quicker go live decision
    – Reduce Total Cost of Ownership (TCO)
    – Increase ROI
    Please check out the following links:
    http://help.sap.com/content/documentation/netweaver/docu_nw_vc.htm
    http://help.sap.com/download/netweaver/nw04/visualcomposer/VC_60_UserGuide_v1_1.pdf
    http://help.sap.com/download/netweaver/nw04/visualcomposer/html/en/fd/4a7e40417c6d1de10000000a1550b0/frameset.htm
    Here the installation guide:
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/45bfd990-0201-0010-e1b3-a38f22a5b5b2
    For download info check this thread:
    Where to download VC?
    Visual Composer as Modelling Tool
    Models designed in Visual Composer can be deployed to run in one or more technology engines, including SAP HTML/B and Flex. The same model can be deployed to more than one environment, although not all components and controls are fully supported in each. Visual Composer implements a proprietary XML-based Visual Composer Language as its source code for creating the models. Only at deployment is the model actually compiled into the executable code required by the selected UI technology. The result is a model once run
    anywhere capability.The models that you build in Visual Composer are generated in Generic Modeling Language (GML) code. To deploy your application to a portal, the GML code
    must be compiled into a language supported by the portal. During compilation, warnings and possible errors may be discovered, enabling you to check the model validity. The compiled content is deployed directly to the portal, in the runtimeenvironment that you select.In runtime, transactional content can run through HTML/B and Flex, while
    analytic content which may require a more animated environment may run through Flex. The models deployed by Visual Composer to the portal include runtime metadata, which is stored with the model in the PCD and exported in the business package, for delivery to customers.
    Thanks,
    Tulasi Palnati

  • Exception reports within SAP

    I am looking for any information on built-in exception reports within SAP, do these exist? The company I work for typically runs custom reports to identify duplicate payments, receiving errors, missed opportunities based on payment terms, etc. These reports are generated outside SAP. I have been able to use screen MB5S (GR/IR Balances) to isolate over received purchase orders, but I am interested to learn more about the tools that are built into SAP. Any help is appreciated!

    Hi.......
    Welcome to SAP Business One Forum.......
    You can not get the query for inbuilt reports.
    But for some of the reports saved in Query manager by System you get.
    But i would suggest you to create your own SQL queries.....
    More beneficial to you.......
    Regards,
    Rahul

  • Please Provide a Key for SAP Predictive Analysis 1.15 32-bit

    please provide a needed a key for SAP Predictive Analysis 1.15 32-bit to be used in University Lab computers.

    Hi Ye,
    I am afraid but the only way today is to delete your document without PA / Lumira.
    By default, local files are stored at :
    User/Documents/SAP Lumira Documents
    In this folder you'll see the list of all the documents you have created with SAP Lumira or SAP PA.
    Delete the document that you don't want anymore and (re)start SAP PA.
    The delete functionnality from the desktop tool is an idea accepted by the Labs (Delete Files in Lumira Desktop : View Idea), but not implemented yet.
    Hope it helps,
    Edouard

Maybe you are looking for