Reconciliation profile is not appearing after execute Reconciliation
Hi , I can create the reconciliation for the user (untrusted) , when OIM creates the user isn´t appear the resource profile, why is that?
Thanks.
For the xellerate user I have three Reconciliation Action Rules
No Matches Found - Create User
One Entity Match Found - Establish Link
One Process Match Found - Establish Link
And for Ad User I have these
One Entity Match Found - Establish Link
One Process Match Found - Establish Link
Is it correct ?
Thanks.
Similar Messages
-
Hi, My iOS device (Ipad mini) only appears in iTunes while cable-connected, but does not appear after diconnect the cable. How can I Wifi sync ?
Documents say
Whenever the computer and the iOS device are on the same network, the iOS device will appear in iTunes, and you can sync it....
But I can't see my iPad Mini in iTunes.
And my Ipad (Settings, General, iTunes Wifi Sinc) shows a message :" Sync will resume when xxx(my PC with iTunes) is available "...
Both are in the same network,
Ipad mini is is plugged in to power
. iTunes is open on the computer
what can i Do ???Hi Skydiver119, and tks for four interest.
I have done exactly as you say, but it does not work for me.
You indicated " Navigate to the info tab and scroll down. There'll be a check box for 'sync over wifi' or something to that effect. Check that box and sync to affirm your choice."
I navigated to Summary tab (not Info Tab) and checked "Sync with this ipad over Wi-Fi"
I disconnect the wire,
and my iPad disappears from my iTunes screen.
in my iPad ->Settings -> General -> iTunes Wi-Fi Sync -> says " Sync will resume when (my PC) is available.
So, I can not sync via wi-fi
I appreciate if you can help me. -
E-Rec Reference Code in the Publication tab should not appear after enddate
hi,
There is a requirement from the client after the end date of the publication ,the reference code should not be displayed to the candidate in the Candidate page ,presently the same is manually done in the system by changing the status to withdrawn.
Is there any way by which we can automate the process by change in customising by which the reference code does not appear after the end date
Please provide a solution if something can be done in the standard setting or do we require any Zworkflow to be developed for the same.
Regards
RKHi RK,
this is nothing the standard supports.
But I would not use a workflow here. As this is a mass handling workflow is no good idea. This is a task for a customer periodical service. Just build a class implementing the periodical service interface which gets all released publications which have a publication end in the past and status released and change their status using the cl_hrrcf_posting_inst_bl. This should be done in a couple of hours. Add the customizing and the issue is solved.
A requirement in this context where a customer workflow is quite handy in my opinion is a customer workflow which closes all postings and withdraws released publications when you close the requisition. This reduces the steps a recruiter has to do and ensures that no candidate applies although you are already done with the requisition.
Kind Regards
Roman -
Why MLB.TV is not appearing after the last update?
why MLB.TV is not appearing after the last update?
Make sure the store is set to the US.. Also restart the ATV.
-
The new Sony DSC-RX10 Lens Profile does not appear in the Enable Lens Profile Develop Module.
The new Sony DSC-RX10 Lens Profile does not appear in the Enable Lens Profile Develop Module.
The wrong lens F3.5/6.3 profile is checkmarked and I can not find the new RX10 Sony 70-200 F2.8 G SMM11 profile. The meta data in the Library module correctly list the Sony RX10 and the Correct lens.
How may I select the correct lens profile for my Sony DSC-RX10?Ask in the PS/ LR/ ACR forums
Mylenium -
Why new contacts are not appearing after some time?
I Am using iPhone6, iPad New and iPad mini. The contacts which I saved in iPhone are not appearing after some time. I don't know whether it is related with synchronisation of other devices. Please help me if you know the reason.
Hi,
Have you checked the filtering option in contacts? Open contact menu button > filter. Perhaps you have a filter hiding the contacts.
What are your thoughts about this forum? Let us know by doing this short survey. -
The Facebook video chat icon is not appear after upgrading to mavericks X
The Facebook video chat icon is not appear after upgrading to mavericks X. Please help.
http://support.apple.com/kb/ht5404
Scroll down to the bottom, read and then perform the troubleshooting steps provided. -
CRT results are not appearing after successful payroll run
CRT results are not appearing after successful run of US payroll, however, RT results are appearing.
Please suggest ideas to find the results of CRT.Hi Rémi Corriveau,
Thank you for spending your time to answer my question.
Here are the answers to your questions . . . .
QUESTION: Did you run a Payroll Simulation or a live Payroll Calculation ?
ANSWER: We did a LIVE payroll run for a period of 3 months.
QUESTION: Did you use t-code pc_payresults ?
ANSWER: Yes, we used the t-code pc_payresults but still it doesn't show the CRT results.
QUESTION: Did you check Processing Class 30 and 70 for your WTs ?
ANSWER: As per the process, we copied the SAP standard (model) Wage Type M010 to
our customized Wage Type, hence, hope that it wouldn't disturb any of the standard SAP settings.
However, we did check the Processing Class 30, but did not check the processing class 70.
Shall update you once PC 70 is also checked.
Please educate, if there are any particular specifications that need to be entered while checking
for our WTs in PC 30 & PC 70. -
Simple floating clock does not appear after shut down
Hi,
On my iMac oxs 10.9.4. my simple floating clock does not appear after shut down.
Can anybody tell me how to overcome this?
CheersAnd now I am at the stage it wont automatically start despite it being ticked in the Log In Items.
As Imp68 has asked, do you mean the "Hide" Checkbox is selected?
If you have checked the box, that says, to start the application, however, hide it so it is not visible when you start.
If you run Applications -> Utilities -> Activity Monitor, can you find Simple Floating Clock as a running app? (Activity Monitor has a Search box to make this easier).
Is Simple Floating Clock on your Menu bar?
Is Simple Floating Clock set to float? -
SHCess field not appearing after using utilization tab in excise invoice
Dear All,
SHCess field not appearing after using utilization tab in excise invoice.The other fields and values releated to SHCess are appearing.
Please give the inputs.
Regards,
deeptiissue resolved
-
Camera Profiles Not Appearing After Download
Hello all, I properly downloaded the camera profiles (shut down Lightroom, ran executable, started up Lightroom), but none of the profiles are appearing. I have Canon 20D and 30D models but also it says in Camera Calibration is "Profile: Embedded". There is no choice in the drop down menu. I am on Windows Vista with full version Lightroom 2.0. Any hints?
>Profile: Embedded
This means you are looking at a non-RAW file such as a tiff or jpeg. The profiles only work on RAW. -
Appset not appearing after import
Hi Friends,
We are on bpc75nw sp04.
Custom appset(A) is correctly imported into target system. I'm able to see in backend(BW), but in fron-end(BPC admin/BPC excel) not appearing. Could any one suggest, what might be reason? How to know install user id of BPC system?
Basis consultant, tried with different user ids like install user, & other users, but he couldn't see at server level as well client level.
I checked uje_user table, it shows appset(A) avialable to USER1.
I hope with USER1 id only, we are able to see appset (A).
Regards,
NareshLog: import ended with warning.
Start of the after-import method RS_APPS_AFTER_IMPORT for object type(s) APPS (Activation Mode)
Start After Import for AppSet XXXX in Client 500 for RFC MDX PARSER
Import Step UPDPTAB completed without errors
Import Step ADMIN_DEF_UPD completed without errors
Import Step APPS_ADD completed without errors
After Import method for AppSet XXXX finished successfully
Start of data checker messages
The file service structure is correct.
Dimension ACCOUNT's master is empty!
Dimension ACCT's master is empty!
Dimension CATEGORY's master is empty!
Dimension CHANNEL's master is empty!
Dimension COST_COMP's master is empty!
Dimension C_ACCT's master is empty!
Dimension C_CATEGORY's master is empty!
Dimension TIME's master is empty!
BPF: Validation error; No template access is defined for template "Sales Flow"
BPF: Validation error; member item "REGION 2" is not in drive dimension "LOCATION"
BPF: Validation error; hierarchy "PARENTH1" is not in drive dimension "LOCATION"
BPF: Validation error; member item "REGION 1" is not in drive dimension "LOCATION"
BPF: Validation error; hierarchy "PARENTH1" is not in drive dimension "LOCATION"
BPF: Validation error; member item "REGION 2" is not in drive dimension "LOCATION"
BPF: Validation error; hierarchy "PARENTH1" is not in drive dimension "LOCATION"
BPF: Validation error; member item "REGION 1" is not in drive dimension "LOCATION"
BPF: Validation error; hierarchy "PARENTH1" is not in drive dimension "LOCATION"
BPF: Validation error; member item "INDIA" is not in drive dimension "LOCATION"
BPF: Validation error; No template access is defined for template "SALES_PLANNING FLOW"
End of data checker messages
End of after import methode RS_APPS_AFTER_IMPORT (Activation Mode) - runtime: 00:19:35
Start of the after-import method RS_APPS_AFTER_IMPORT for object type(s) APPS (Delete Mode)
Nothing to delete.
End of after import methode RS_APPS_AFTER_IMPORT (Delete Mode) - runtime: 00:00:00
Post-import method RS_AFTER_IMPORT completed for APPS L, date and time: 20110207110512
Post-import methods of change/transport request BQ1K900069 completed
Start of subsequent processing ... 20110207104537
End of subsequent processing... 20110207110512
Execute reports for change/transport request: BQ1K900069
on the application server: sparbdb
Ended with return code: ===> 4 <=== -
Sessions Not Closed After 'Execute Unix/Linux SSH Script' Activity
Hello,
Wondering if anyone out there has some experience with running "Execute Unix/Linux SSH Script" activities against a "Unix/Linux System" target and able to help?
We have a process that runs an ssh script on a Unix/Linux target and in the 'Target' tab we specify to open a new session on the target we want. It was our assumption that once the script is executed successfully that the session would be closed, however, that does not appear to be the case. It seems the target receives a "disconnect" from CPO but if we run "who -a" on the host, the session still exists. We are trying to run our activity/script in a while loop with a 60 second pause in between, and after 30 loops (30 minutes) the next call fails.
What appears to be happening is, the session opens on the Linux target and every occurrence of the "Execute Unix/Linux SSH Script" activity is merely connecting and disconnecting using the same session that was originally opened. But after the 30 minute idle timeout on the Linux host, the session is closed and the next occurrence of the SSH Script activity fails with the following error:
This activity xyz did not return within the expected time period and was abandoned.
Is there a setting in the target properties or activity properties that we're missing here??
Thank you for any feedback or suggestions that may be out there!
NeilNeil,
I will discuss with you through email to find what exactly happened in your case.
Thanks,
James -
Actual Activities not appearing after Confirmation
Hi,
I got a situation where in we are using CO11 for confirmation.
We have 3 Activities in the Std Values viz, Machine, Labour and Actual Weight
After entering the Yield Qty and pressing Actual Data, Machine and Labour are appearing, but Actual Weight is not Appearing.
Necessary settings in OPK4 and OPK0 are already in place.
Please guide.
Thanks in advance,
HarrisHi,
Thanks for the prompt response.
- System is calculating the Activities as required in the Production Order which i can see in the details information of the Operation.
- They are using CO11 for the confirmation.
- There is no Manual entry at the time of Confirmation.
- In OPK0 Default Confirmation Profile SAP001 is being ticked marked.
- Default Values , Qty and Service in OPK0
Procedural Steps for CO11:
- I run CO11
- Enter Production Order No. and give enter
- Here it shows the Yield Qty
- Then i press ACTUAL DATA icon and i get only the Machine and Labour Activity, but not the ACTUAL WEIGHT.
Procedural Steps for CO11N:
- i also tried running it in CO11n
- Here i enter the production order no. on the time ticket screen and give enter
- Here too only Machine and Labour is seen, Actual Weight is still missing.
- Then i once again hit ENTER and i am getting the Actual Weight Now.
- But as soon as i press Actual Data button, the Actual Weight disappears and the field appears Blank.
It is very strange, but this is the problem.
Please guide
Thanks and regards,
Harris
Edited by: Harris Panchal on Mar 12, 2010 3:19 PM -
Crystal Report Viewer is not appearing after hosting on server
Dear Friends
I developed a web application in Visual Studio 2010, and my Database is SQL Server 2008 R2.
I created reports using Crystal Report 13 in Visual Studio and my Operating System is Windows 7 32-Bit.
All reports are running fine at my machine.
When I copied published folder into "wwwroot" folder and hosted, all reports are working Good.
Here i have my web application in "Default Web Sites" in IIS.
Then After I added a new website in IIS with a port No. and created a virtual folder and hosted my web application.
The application is running fine, But the problem is Reports are not appearing on Web Page.
I have created an toolbar to export the report. And when I am exporting the report to PDF, It is working well and reports are exported successfully.
I didn't understand why this is happening?
Is this a problem of port no. ?
or
Is this a problem of IIS?
or
Is this a problem of Browser?
or
Is this a problem with CrystalReportViewer?
or
something else?
In fact I have the folder for "C:\inetpub\wwwroot\aspnet_client\system_web\4_0_30319\crystalreportviewers13". for crystal reports.
Dear All kindly help me in this issue, it is disturbing me since 5 days.
All helps are appreciable.
Thank you.Enter the following:
viewer blank net crystal
into the search box in the top right corner. You should get a number of hits (Kbases and articles) that should point you to a solution.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]
Maybe you are looking for
-
Date in Report is not correct !!
When i look in a PC´s daily Report the weekday is not korrekt, so NM for the 13th of March says, it was a Fryday, but its Saturday.
-
Creating an expandable text field without a scrollbar
Hi All! Hope someone can help. I need to create a flowable subform that will allow text fields to expand without a scrollbar. I have been researching the forums and have found this thread: http://forums.adobe.com/message/2372965 When modifying the te
-
Cannot download Adobe Flash Player on Equium M40X-189
I am unable to download the latest version of Adobe Flash Player on my Equium M40X 189. This is needed for many applications, and has recently become absolutely essential as BBC radio now only broadcasts on the internet via BBC i-player, which I cann
-
Power Mac won't boot, a few issues....
My PowerMac was sitting dormant for about 2 years when I decided to get it going. I hauled out the 10.3 install discs a new 80 GB hd and got to work. The cd's booted good and when I got to the installer the screen was black, white and grainy. I thoug
-
Files corrupt when saved as Jpeg.
Recently I have been creating invitations in illustrator but when I save them as a JPEG file it says file corrupted when I try to upload them for printing. How can I fix this without creating an entirely new invitation?