Reconnect issues

Hi,
I'm having an odd issue with Color that's ruining our project. We did an edit in FCP 6.0.4 with R3D footage converted to ProRes and did an offline edit. After the edits were made, we offlined the timeline clips, and batch captured the footage as REDCODE, and moved it all over to Color. Here's where things went wrong. I copied the Color project file, all related media, and the media-managed FCP project file to an external drive and sent it to the post house for online. When they got it, all the colors looked crunched. All the settings were the same, REC709, ISO320, grades were the same.
They called and said that by changing the ISO of the REDCODE clips, it comes out ok for them, so I'm guessing there's a discrepancy with our 1.0.3 version compared to whatever they have. That's problem 1, figuring out what caused the color crunch.
The second problem came when I tried to load the Color project on our end again. All the media was disconnected, and using the Reconnect utility under File, or clicking "reconnect" under the right-click menu didn't do anything, despite selecting the exact clip. I updated to 1.0.4 from 1.0.3 after learning about the reconnect and ISO issues of 1.0.3, and Color only reconnected half of my clips. Does anyone know what the reconnect issue is?
Thanks in advance.

Right click on the COLOR timeline and see if the reconnect media dialog helps.
jPo

Similar Messages

Cellular reconnectivity issues with 3rd Gen iPad 3G/4G/LTE

I've read a few other threads regarding a reconnection issue with the new (3rd Gen) iPad. I'm creating a discussion so people can put there thoughts here regarding the issues they are having with reconnection of cellular data connections.
I have AT&T 64B iPad Gen 3 with 4G/LTE. Black. Works just fine on wifi and my LTE screams at home and work. Faster than my cable at home. I have noticed something behavior regarding data connection when it's lost (like in a tunnel). I ride DC Metro to work and go through a few tunnels. Of course, my data connection drops in the tunnels. When I come back out the indicator on the iPad indicates 5 bars signal and LTE again. Problem is the data connection isn't there, no matter what app I try. I even get a popup window say my cellular data plan has not been activated (huh?). This isn't true since I am on, and have been using a plan. It does this whether it's 4G or LTE reconnection. Not sure about 3G because I haven't seen 3G icon popup on this iPad yet.
I'm thinking this may be an authentication issue? Else, why would it popup that warning? Anyway, all I do is is go into settings turn cellular data off and back on again and everything is fine.
I'm guessing that there could be a software fix for this in the future as there are quite a bunch of people having this problem with reconnection to cellular.
Please post your issues here in this discussion if you have this problem. Maybe we can figure something out.

I have the same iPad (3rd gen, 4G ATT, 64GB, Black). When it arrived last Friday, everything seemed to work fine, except the cellular data connection. It would constantly drop, and I had to toggle cellular data off and back on to get it back. Also, I was getting really slow speeds (on cellular data only - wifi works fine). I tried some simple fixes (restarting, resetting the network settings, restoring), but I kept having the problem. I finally made an appointment at the Genius Bar, and they immediately gave me a new iPad, saying "it could be a bad antenna." Here is the bad news. Even with the replacement, the connection seems to drop less often, but it still drops. The part that concerns me most is that the data speeds on my iPad are considerably slower than on my iPhone 4S when I test them in the exact same spot (I use the Speed Test app). So on my iphone, I get speeds around 3 Mbps, and on the iPad, I get speeds of less than 1Mbps. I can't see any logical reason that the 3rd gen iPad would not get at least as good or better data speeds as an iPhone 4S. The fact that I have now had two 3rd gen iPads with cellular data problems concerns me. However, it is very hard to tell if this is a software, hardware, or network issue. The fact that my iPhone is running the same update of iOS (5.1), and has no problems would seem to eliminate the software and network as causes, but I can't really be sure. I am going to watch the posts in the support communities for another day or two and then head back to the Genius Bar. Overall I love the new iPad, but this has been a real downer.

Reconnecting issues

after i did a operating system update, a few months ago, i lost connection with my printer. now i am trying to reconnect and the computer cant even find the printer. my computer said to make sure my bluetooth was working on the computer and i cant even find that. I also have a hp computer (dont know the model.)

Hi @peanut87,
Welcome to the HP Forums!
I understand that you are having reconnecting issues with your HP Photosmart c4795 on Windows 8.1. I am happy to look into this connection issue for you!
How is your printer connected? Wireless or USB?
In the meantime, please try the HP Print and Scan Doctor, and let me know what happens!
Hope to hear from you soon, and have a nice day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

RFC Adapter reconnect issue

hi
We have a problem with RFC connection with SAP System on production.
I consuder to change initialRfcClientConnectCheck to false.
But in this case RFC adapter will check connection each time. It is not good for performace.
What doy think is it good practice to have initialRfcClientConnectCheck=false on production system? I don't see another way How to force XI reconnect after shutdown of SAP System.

Hi,
Apart from setting this option there is no other way out.
We have made this change in our production and we have faced no issue in terms of perfromance after setting the parameter!
Regards
Bhavesh

Reconnecting Issues with Batch List

Hello,
I am working with a client who created a ton of sub-clips and sent me a batch list of them. He is using FCP 7.0.3 and I am using 6.0.6. When imported, all of the subclips show up with the same name in the browser window (not sure if this is standard as I haven't used batch lists before).
I am having two issues:
- Since there are a ton of subclips, I am obviously hoping to reconnect all of them at once. However, when I go to reconnect, even though I highlight all the clips in the browser window and have checked off the "reconnect all files in similar path" box- it will only reconnect one sublicip at a time.
- For some reason when the sublips do reconnect (one at a time) they are converted to 4:3 from anamorphic- so I have to go into Item Properties and manually check off the anamorphic box to make them normal.
Obviously I can continue with the project, but it will take me a long time to reconnect each sublicip individually and then re-anamorphic (sorry for the made up word) each one manually. It's going to take a long time.
Any suggestions?
Thank you.

Michael,
Thanks again. I understand now what you are saying. When I reconnect, the dialogue box lists the files as coming from an "Unspecified Path." However, It's finding the files just fine- and it says it can reconnect the clips. However, when it does, it only reconnects one subclip at a time, even though I have highlighted them all. That's the issue. Since all the sublicips I am trying to reconnect have the same name in the browser (they are all named the same as the original clip), FCP will only connect one at a time (apparently it seems to think that the files are all one because they have the same names).
Same thing with selecting multiple clips and then going to Item Properties and clicking on anamorphic- FCP thinks all the clips are really one clip, so it only reconnects one at a time.
Hopefully I am being clear with the problem.
Thanks!

CSS 11501 - Network reconnection issue

Using a CSS 11501 switch to configure both Load balancing and server hot standby between two servers (of same config). Clients are connecting to the server using tcp/ip sessions.
The configuration used is shown below:
=========================================
configure
ip route 0.0.0.0 0.0.0.0 10.167.50.1 1
!************************* INTERFACE
interface e2
bridge vlan 9
interface e3
bridge vlan 9
!************************** CIRCUIT
circuit VLAN1
ip address 10.167.50.108 255.255.254.0
circuit VLAN9
ip address 10.167.70.1 255.255.254.0
!************************** SERVICE
service abc_service1
ip address 10.167.70.2
protocol tcp
port 6300
keepalive type tcp
active
service abc_service2
ip address 10.167.70.3
protocol tcp
port 6300
keepalive type tcp
active
!*************************** OWNER
owner xxxxx
content abc_crule
vip address 10.167.50.109
add service abc_service1
add service abc_service2
protocol tcp
port 6300
balance aca
active
===============================
We conducted three tests to verify the hot standby while client sending the data to server app thro tcp/ip.
1) Brought down the service on one server 2) Restarted the OS (Windows 2003) on one server 3) Removed a network cable of one of the server connecting to CSS.
client app lost the conn to the service/server, but when it tried reconnecting to the alternate server, it was successful.
CSS status reflected the actual status of the service/server.
But in third test (removing network conn) the service state changed from "Alive" to "Down" and client app lost conn to the server. Client app tried reconnecting and it was successful connecting to the alternate server.
But when we connected the network cable back, the CSS state was continue to be in "Down". Also,the network connection between CSS and server was not available after reconnection. Also, the status of alternate server changed to "Down", but still client app was successfully transmitting to the alternate server. Stopping the client app and tried reconnecting,
the connection was not going thro.
The connection could be established between CSS and server boxes only after restarting the OS(running windows 2003).
Issues:
1. Service status in CSS continue to be down even after reconnecting the cable with the service running.
2. CSS status of the first service also went down after reconnecting the other server.
3. Client app could not reconnect to any of the servers.
Are we missing any configuration parameter in CSS which will address the above?
regards
Param

Param,
what software version for the CSS ?
Did you see an ARP entry on the server for the CSS ?
Did you see an ARP entry on the CSS for the server ?
is the server directly connected to the CSS or is there an L2 switch inbetween ?
Could you configure 'bridge spanning-tree disabled' on the CSS and see if this improves the situation.
Regards,
Gilles.

WRT350N: Unable to connect or ping wireless client on LAN, and reconnect issue

I own a WRT350N (V2.00.17), it's a great piece of hardware. But I can't seem to connect to a client connected over the wifi. In the terms of "ping":
* ping wifi-client from wired-client - Not OK
* ping wifi-client from other wifi-client - Not OK
* ping wired-client from wif-client - OK
* ping wired-client from other wired-client - Not OK
Another example:
I have a server (192.168.1.100) on wifi serving Windows shares, this server is on wifi. All the clients on the LAN is also on wifi, however trying to connect to the server with \\192.168.1.100 returns a timeout message. I have created a port forward rule that forwards all traffic on 137-139 to 192.168.1.100. If my public IP is 123.123.123.123 I then can connect to my Windows shares on the server via \\123.123.123.123
Another issue is that if a wifi-client is inactive network-wise for some time (perhaps as low as 5 minutes) the wifi-client needs to reconnect to the router, could this be "fixed" on the router-side?
Regards
//archangel
Solved!
Go to Solution.

It seems that the "AP Isolation" option had a hickup. Enabled it, saved, disabled it, saved. Now it's working.

Reconnect issues w/FCP 6 with "phantom missing clips"

Ok folks it's kinda hard to describe in a concise way what's going on so please bear with me.
We are working with FCP6 on multiple machines.
We have one master project file that Edit 1 houses.
We work on the other machines on a copy of that master project file and bring in the work sequences into the Edit 1 master project as they are completed.
We do this a lot and move sequences around.
Ever now and then we have serious reconnection to media issues on the main machine where when I go to reconnect a sequence to the media files it will bring up a ton of "blank" or "phantom" clips in the missing files box in the reconnect window. Basically instead of a list of clip names that FCP wants me to reconnect it will list a batch of clips that are blank with no txt and therefore we have no way of connecting that media.
Has anyone experienced this issue before and how have you worked around this?
any help very much appreciated and if you need more info to understand what the **** I'm talking about then please let me know!
J

I've never been able to truly get that to happen properly.
Over the break I will give that one more shot.
On the two main systems we work with we do have the same size and config of drives etc so it can be achieved. I'll take a look at that option over the break and see if I make make it happen.
I do take the project home at times and media manage the footage into a much smaller drive to work on sections of the project so in that case there's no way around it. Although I guess if I keep the naming and folder structure the same it's possible. I'll give that a try too.
thx.

Wireless Reconnection Issue (broadcom-wl)

I installed the broadcom-wl driver from the AUR to use the wireless chip in a Dell Inspiron 1525, and I have a strange issue now. When I boot the machine, I can connect to one of the building's two WEP-encrypted networks (yes, I know they should change to a different encryption standard). If I disconnect or need to switch to the other AP, dhcpcd seems to fail. I'm using wicd to connect to the network. It throws "could not get an IP address" when I try to reconnect. The only solution is to reboot the machine—I even tried unloading all the associated network modules (lib80211_crypt_tkip and wl), restarting wicd, and prowling for any remaining instances of dhcpcd. What can I do to fix this?
Here is some information that might help:
$ lspci -vnn | grep 'Broadcom'
0b:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g [14e4:4315] (rev 01)
wicd.log during a reconnection attempt:
2010/11/18 11:43:17 :: Attempting to authenticate...
2010/11/18 11:43:17 :: ['wpa_supplicant', '-B', '-i', 'eth0', '-c', '/var/lib/wicd/configurations/0024c8835230', '-D', 'wext']
2010/11/18 11:43:17 :: ['iwconfig', 'eth0', 'essid', '<essid>']
2010/11/18 11:43:17 :: iwconfig eth0 channel 8
2010/11/18 11:43:17 :: iwconfig eth0 ap 00:24:C8:83:52:30
2010/11/18 11:43:17 :: WPA_CLI RESULT IS DISCONNECTED
2010/11/18 11:43:18 :: WPA_CLI RESULT IS COMPLETED
2010/11/18 11:43:18 :: Running DHCP with hostname thopkins
2010/11/18 11:43:18 :: /sbin/dhcpcd eth0
2010/11/18 11:43:18 :: dhcpcd[4732]: version 5.2.8 starting
2010/11/18 11:43:18 ::
2010/11/18 11:43:18 :: dhcpcd[4732]: eth0: broadcasting for a lease
2010/11/18 11:43:18 ::
2010/11/18 11:43:41 :: found backend in configuration external
2010/11/18 11:43:48 :: dhcpcd[4732]: timed out
errors.log from around the same time:
Nov 18 11:42:44 localhost dhcpcd[4591]: dhcpcd not running
Nov 18 11:42:44 localhost dhcpcd[4597]: dhcpcd not running
Nov 18 11:42:44 localhost dhcpcd[4604]: dhcpcd not running
Nov 18 11:43:10 localhost dhcpcd[4697]: dhcpcd not running
Nov 18 11:43:15 localhost dhcpcd[4706]: dhcpcd not running
Nov 18 11:43:15 localhost dhcpcd[4712]: dhcpcd not running
Nov 18 11:43:15 localhost dhcpcd[4719]: dhcpcd not running
Nov 18 11:43:48 localhost dhcpcd[4732]: timed out
Nov 18 11:43:48 localhost dhcpcd[4743]: dhcpcd not running
Nov 18 11:43:48 localhost dhcpcd[4749]: dhcpcd not running
Nov 18 11:45:24 localhost dhcpcd[4615]: dhcpcd not running
Nov 18 11:45:24 localhost dhcpcd[4621]: dhcpcd not running
Nov 18 11:45:24 localhost dhcpcd[4628]: dhcpcd not running
Let me know if you want to see anything else to diagnose this.
Last edited by Snowknight (2010-11-18 18:47:28)

Improper forum aside, I do not have this issue with networkmanager. I'll poke around a bit later and see if I should report a bug somewhere. I would mark this as solved, but it's not really solved as much as allayed.
Last edited by Snowknight (2010-11-20 01:47:11)

BlackBerry 10 WiFi reconnection issue

If for any reason i reboot my BlackBerry Z10 I cannot reconnect to my work WiFi network unles i switch off WiFi before i reboot. Please Help
BES 10.2

Hi, yspatro
I have a few questions for clarification:
1) Are you able to connect to the network on the router, but not the Internet?
2) How long have you been having this issue?
3) When you do try to connect, what happens when Windows determines that you cannot?
4) What operating system are you running?
I would recommend updating all your drivers and BIOS. All of them can be found here. This may help your issue, but it should also ensure that your computer runs at peak efficiency.
Hope it helps, and let me know how it goes
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

Strange WLS6.sp2 Oracle DB Reconnect issue in a Cluster but ONLY on the Admin server

Any Ideas? ->
I am having a issue when our oracle db server goes down and when we try
to reconnect the Pool via weblogic I am getting this error. This only
happens on the Admin server for the cluster, none of the managed servers get
this and they all seem to be ok. Any ideas?
-Pete
**** Below is the stack trace:
java.sql.SQLException: Io exception: Broken pipe
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:114)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:156)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:269)
at
oracle.jdbc.driver.OracleStatement.executeNonQuery(OracleStatement.java:1329
at
oracle.jdbc.driver.OracleStatement.doExecuteOther(OracleStatement.java:1232)
at
oracle.jdbc.driver.OracleStatement.doExecuteWithBatch(OracleStatement.java:1
353)
at
oracle.jdbc.driver.OracleStatement.doExecute(OracleStatement.java:1760)
at
oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java
:1805)
at
oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedState
ment.java:322)
at
oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.j
ava:366)
at
weblogic.jdbc.pool.PreparedStatement.execute(PreparedStatement.java:45)
at
weblogic.jdbc.rmi.internal.PreparedStatementImpl.execute(PreparedStatementIm
pl.java:289)
at
weblogic.jdbc.rmi.SerialPreparedStatement.execute(SerialPreparedStatement.ja
va:398)

Hi,
As i understand is OS is clustered not the db. Better is to manually shutdown the db clean and then start it.
TO start login through sqlplus sys as sysdba
1. startup
2. Once its done, start the listener
3. Start the application
Anand

6300 Bluetooth a2dp headset reconnection issue

Hi,
I have a Nokia 6300 with latest firmware/software. I am using a SE MW600 Bluetooth stereo headset for listening music, everything ok but when I try to reconnect it always loose connection. It says Disconnecting... .
I had the same issue before with a non-original (No brand) A2DP headset. It seems this is not the headset's issue, I think this is the Nokia 6300 phone's issue.
It is 2010 now, but Bluetooth is not compatible with its devices.
What is the solution? Why do I have to pay for something for Bluetooth, for Symbian, for Nokia phone they can not make a compatible device / accessory / software ? Is Bluetooth a standard? Why do we have to pay for those ?engineers who can not make a compatible device?

Well, I decided I didn't want to put up with this anymore, so my Pre went back to the store yesterday. I'm just sick of having a phone that's missing one crucial feature or another--I've been a loyal Palm customer for many years now, but it seems like they have turned into a second-class company. Lack of support and updates, shoddy products, etc.--it just seems like they never quite get it right.
So, I'm somewhat sorry to say it, but I'm going to get an iphone. While I'd prefer to have a device that had a physical QWERTY keyboard, I'm willing to put up with a virtual one as long as the phone operates correctly.
So, thanks for the memories, Palm! On to the iphone I go.........

Media Reconnection Issues (search problems); 1 project file, two data sets

Ok, here goes folks!
We have:
Mac Pro, 6tb MaxxDigital RAID
MacBook Pro, 3x 1tb GRAIDs
The data on the Gtechs's is the same as the data on the Maxx tower- the file structure is different.
Whenever the project file is updated on the main MacPro it is moved via USB key to the macbook pro, at which time media needs to be reconnected (to the graids).
Recently the search in a single location feature had not been working in the reconnect dialog- we select the drive (any of the three) and are given the nope tone. This is a huge project- long form doc with 30+ hours of footage. It is killing us having to manually specify each folder in the drive depending on the file. Previously just selecting the root drive would start the search and all would be well.
Here are my questions:
Is there something we can do to restore the reconnect search functionality?
Could we alleviate this by getting a large enough SATA raid and express card adapter to make an exact copy of the main Maxx Raid? Would it be easier to reconnect?
Can anyone offer any workflow tips for our situation?
Generally I am over on the main box doing composites, graphics, spit and polish, etc, while the Director is on the MBP roughing segments. Soon we will be moving to me doing spit and polish on the MBP and color grading on the main box.
I hope there is enough information here for anyone with advice to offer, please dont hesitate to ask for more info if needed. Thanks for taking the time to read this and I look forward to hearing what you guys think.
-Kevin

"Everybody's lookin for answers......."

Socket reconnection issue

Hi,
our aim of using the sockets is to send the HL7-message to HL7-engine.
while reconnecting to the engine(server) i am following the steps
1. close the outputstream of the socket
( socket.getOutputStream().close() )
2. close the socket
( socket.close() )
3. wait for 2 minutes and
4. create the socket and connect to engine
imedxORUChannel = new Socket();
imedxORUChannel.connect(new InetSocketAddress(getREMOTEHOST(), getREMOTEPORT()));
5. sometimes client socket is getting connected to server , sometimes not.
i want the socket to connect to remote host with in small span of time.
can any one provide the solution for this.
thanks in advance .

while reconnecting to the engine(server) i am following the steps
1. close the outputstream of the socket
( socket.getOutputStream().close() )
2. close the socket
( socket.close() )Unnecessary if you've closed the output stream.
3. wait for 2 minutes and Why?
5. sometimes client socket is getting connected to server , sometimes not.What exception is thrown when it fails? Show the complete exception text.
i want the socket to connect to remote host with in small span of time.It should connect within seconds, or fail after not more than about 75 seconds. You can reduce that timeout by calling the connect() method that takes a timeout parameter.

I need help understanding reconnect issues with my photos

I have having a really difficult time learning to use this program. I automatically have all my pictures saved in Elements. I seem to be unable to save my photos in any folders, so therefore I am unable to upload any one picture to facebook or my word processing program. I am not finding any options for sorting my files. I use tags and have them all tagged but that doesn't help me. I want to make a CD of only certain photos not every photo in my catalog.
What I have been doing is is using file>move>desktop and then uploading or copying from there. I keep running into problems when I go back to elements that my photos are not connected and need to be reconnected. Dozens and dozens of my photos need reconnecting and I can't seem to find them.
What am I doing wrong? The current project I am trying to accomplish is making a CD of about 60 of my daughters graduation pictures from the total collection of over 100 pictures. I am very frustrated because I cannot do this while feeling that it should be a doable project in this program.
As a side comment I have watched so many tutorial videos for this program but they don't seem to answer my questions, altough I have learned a lot from them, the pictures just sit there in elements and I can not share them or show them off.

First, a better workflow: if you want to make a CD of some photos for someone, create a collection or album for this purpose. Place all the desired photos into this collection or album. Inside the collection/album, you can sort the photos in any way you'd like. Then, once you are happy, select all the photos in the collection/album, File->Export->As New Files, export the photos to a temporary folder somewhere, and then burn your CD. In general, any time you want to share your photos, this is the process (the creating of a collection/album is optional, but you always want to use File->Export->As New Files)
Reconnecting: please read this FAQ

Reconnect issues

Similar Messages

Maybe you are looking for