Reconnect media dialogue not working properly after advanced pulldown rem..

i'm running a macpro with the latest version of FCP (5.1.4) and tiger (10.4.9)
i have a project where some of the footage is 24Pa, but was captured as regular 29.97 ntsc footage. because it's 24pa it's creating some interesting banding when i try to export out with out removing the pulldown. in an attempt to remedy this problem i decided to remove the pulldown and export everything as a 23.98 file (it's going on the web)
I selected all the clips that needed to have the pulldown removed and used the "remove advanced pulldown" from the tools menu. fcp went through and processed everything as it should, but when it finished it only reconnected a couple of the clips, leaving the rest offline.
I then selected the offline clips to manually reconnect them, and the reconnect dialogue opens, it lets me choose the files, but it doesn't show the file in the bottom half of the window, but it will continue to let me choose the next file down, the problem is when i hit the end of the list of files to reconnect, it still shows all the files in the top, and none in the bottome, but the "skip" "locate" and "search" button are no longer available and the "connect" button at the bottom is also not available.
i've checked the processed files with quicktime and they all read as 23.98 files now.
I made a copy of all the media files beforehand, so i have all the raw captures as 29.97 clips just as a forethought.
any ideas as to what the issues are? and why the reconnect dialogue is acting so strangely?
2.66 macPro   Mac OS X (10.4.9)   2gb ram fcp 5.1.4

This shouldn't work. What the proper way of doing things is to capture, reverse telecine, THEN import into FCP and begin editing. You cannot, AFAIK, edit, then reverse telecine and have it connect. This is because all the original clips are linked to 29.97 media, and you are trying to connect them to 23.98 media...and it doesn't want to because the frame rates differ.
Remove pulldown BEFORE you edit, not after.
Shane

Similar Messages

  • Media Manager not working properly after installing update

    I have an 8110 and upgraded to desktop ver. 5.0.  Since that time, Media Manager does not recognize the 8110 put pictures on computer.
    What do I need to do to correct this?
    Thanks.
    Solved!
    Go to Solution.

    There is no need in Media Manager.
    You can transfer files directly:
    http://supportforums.blackberry.com/rim/board/message?board.id=BlackBerryDesktopSoftware&message.id=...

  • Aluminum Wireless Keyboard not working properly after Firmware update 1.1

    Hi,
    Well, as the subject says, my keyboard is not working properly after I updated the firmware. The problem is that several keys (delete, down arrow, brackets and apostrophe) stopped working right after I installed the update. I never dropped it or hit it. And I did not stop or interrupt or did anything during the install. I take very good care of it.
    I have already tried toubleshooting with the support page, restarting the iMac, taking off the batteries, setting it up with bluetooth again, going back a week with time machine and to reinstall the firmware. So, if you have something new for me to try, I will really apreciate it.
    Thanks in advance.
    Franco.

    I have 24" iMac with the Apple wireless M&KB - I know this is basic but have you tried a fresh set of batteries? My KB will refuse to establish connection when batteries are on the weak side the firmware update may just be a co incidents. If your wireless mouse is working OK then I would guess the blue tooth is functioning.
    Not sure about the 10.49 download - are your other file downloads completing properly? Are there any error messages?
    Steve

  • ITunes / iPhone not working properly after newest update...

    iTunes is not working properly after the newest update...  It dosen't see my iPhone, the program acts very sluggish, and has trouble loading the Store.  Anyone have a solution or an explanation?  I have tried the suggestions found in other threads ie. restart, re-download, charge phone, restart phone and so on. Nothing works.  Everything was working fine until iTunes and the new ios were installed.  After that it all went to crap.  Thanks, Randy...

    Close your iTunes,
    Go to command Prompt -
    (Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
    (Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
    In the "Command Prompt" screen, type in
    netsh winsock reset
    Hit "ENTER" key
    Restart your computer.
    If you do get a prompt after restart windows to remap LSP, just click NO.
    Now launch your iTunes and see if it is working now.
    If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
    iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/TS4123?viewlocale=en_US

  • My Iphoto does not work properly, after downloading Mavericks.  How can I fix it ?  loading Mavericks

    My Iphoto does not work properly after downloading Maverick. How can I fix it ?

    With the amount of information you've provided it's impossible to offer a potential solution.  We can't see your computer so we need to know the details of your problem and setup, i.e.:
    what version of iPhoto are you using?
    what system version are you running?
    what do you mean by not working properly? Explain in detail.
    what fixes have you tried?
    where is your library located?
    did you apply any updates or upgrades just prior to the problem occurring?
    are you running a "managed" or "referenced" library?
    what type of Mac?
    how much free space on your boot drive?
    OT

  • Camera not working properly after ios7 upgrade in iphone 4s

    Iphone 4S
    Camera not working properly after iOS7 upgrade.
    It defaultly takes other effects that is chrome in filter section, once we wdit in phone it can brought to normal (without filter)
    help me to solve this problem

    Have you tried a battery pull?  If the issue is still there, you can either take it to the store or downgrade your software to the previous version to troubleshoot.
    Please click the Thumbs Up icon if this comment has helped you!
    If your issue is resolved, please click the solution button on the resolution!
    Every BlackBerry should have BlackBerry Protect, get it now! | Follow me on Twitter | Bring Back BBM Music!

  • Asha 501 : Whatsapp not working properly after 14....

    Hi,
    whatsapp is not working properly after software update, some times contacts never sync. screen goes pale and chat window doesn't show properly.
    Looks like memory problem after the new  updates or anything else?

    Similar complains around the web. I'd recommend getting the phone flashed at a care point to see if that improves the situation.
    Do wait for a couple of weeks for the full firmware files to be available at the respective care centers. AFAIK, they are not yet available in India.

  • Photoshop not working properly after new installation

    I have a brand new Dell desktop that runs windows 8. I installed the Adobe Creative Suite 5.5 Master Collection and got a message saying that there were errors during installation and some things might not work properly. I uninstalled and did it a second time. Same message.
    I then spoke with an  Adobe agent that helped me download a program to detect what the errors were. He said they were minor issues and shouldn't affect the programs. No help there.
    I then spent hours today speaking with Dell on the phone and the rep took remote control of the computer and did a diagnostics check on the hardware. He said everything is fine. I asked him if it might be the video card needing an update so he ran an update. Same issues, no change.
    We changed the compatability to windows 7 and still no change.
    I then uninstalled the creative suite and tried installing it from the desktop. Still same problems.
    These are the issues in photoshop:
    1)When using certain tools (transform tool, crop tool) the images goes completely black.
    2) The background switches at random- sometimes checkered, sometimes grey, and sometimes black.
    3) Color saturation is incorrectly represented. It switches whenever it wants. For instance, when I zoom in and out it changes.
    In Adobe Bridge some of the RAW images don't show in the program. Some I just can't open. Others open fine. Those images will open in Photoshop but not in Bridge.
    So I have no idea what to do and this is becoming extremely frustrating. I should add I haven't had any problems with Lightroom and it works fine as far as I can tell.
    What could be causing these issues? Could the install CD be damaged?

    I turned off the GPU in Photoshop's preferences as you suggested and everything seems to work properly now in Photoshop. In Adobe bridge the files are also all showing now and there doesn't seem to be the same issue there either.
    I also tried enabling the GPU and changing it to Basic and it continues to work, but when it is changed to advanced when enabled the problems arise again.
    So it seems as though the problem is with the video card or its driver as you said. I am not 100% sure that the Dell rep updated the driver from AMD but I am pretty sure he did. I did go to the AMD website and ran a program to detect if the driver needs to be updated and it resulted in a message saying that the driver is up to date and current.
    As you said this is just a temporary solution and I want to make sure I have a working GPU system. What do you think the problem is then? How would you suggest I proceed? Should I contact Dell and tell them the problem seems to be with the installed video card?

  • Smart Actions not working properly after software update

    My Razr updated 2 days ago and since then my Smart Actions are not working properly. 
    I have my Work action set to turn the volume down when I'm at a certain GPS.  It shows that "Work" is active, but doesn't turn the volume down.
    Also, there are times (since I've owned the phone) that it will not connect to the network after coming off a Wifi Connection without rebooting the phone.  I took it into a Verizon store and they did a hard reset, and that fixed it for a time, but it started doing it again. 
    Any help appreciated.

        Hi mcclainkb, Let's make sure your phone works as you expect it to! Have you tried removing the Smart Action and setting it back up again?  Are your other GPS services working as normal?  After the hard reset performed in the store did you install all of the same application that you had before?
    Thank you,
    YaleK_VZW
    Follow us on Twitter @VZWsupport

  • Ipad2, safari does not work properly after ios6 update. How do I fix it?

    I need help in fixing safari problems after ios6

    With the amount of information you've provided it's impossible to offer a potential solution.  We can't see your computer so we need to know the details of your problem and setup, i.e.:
    what version of iPhoto are you using?
    what system version are you running?
    what do you mean by not working properly? Explain in detail.
    what fixes have you tried?
    where is your library located?
    did you apply any updates or upgrades just prior to the problem occurring?
    are you running a "managed" or "referenced" library?
    what type of Mac?
    how much free space on your boot drive?
    OT

  • HT201210 AUDIO NOT WORKING PROPERLY AFTER INSTALLED IOS7

    After installed ios 7
    photos not able to see fully
    audio not working properly.... [no treble, no depth in sound, very low soung even the volume is full]
    get strucks while playing games

    This board is full of people that are update crazy...
    even when they have perfectly good working systems.
    i know i thought well it's just a security update not a major update.
    Best advice... whenever updating the OS, unplug all
    firewire devices.
    will take note of that from now on.
    Was this auto-update? Try downloading the file and
    running the update again with all firewire devices
    unplugged.
    While the 828 is disconnected perform the factory
    reset
    again.
    Disconnect the firewire cable from the 828mkII
    -Press the Setup knob
    -Turn the Setup knob all the way to the right
    -Press the Select knob
    -Press the Value knob
    -Power off the interface and plug the firewire cable
    back
    in
    -Power the interface back on
    i have the original 828 not mark 2, so no reset i know of, just power on off.
    After the Mac updates... reboot and plugin the 828,
    see if that doesn't get you going.
    pancenter-
    cheers pancenter, i'll give it a whirl updating without the interface plugged in. thanks for all your help.

  • Touchpad not working properly after changing LCD and invertor

    Product - HP Pavilion DV4 1318TU
    I was having display problems, went through repairer. He changed the LCD, invertor and fixed some issues of motherboard(related display output). After fixing these issues i am facing touchpad issues. Touch is not working properly, and when I use USB mouse its working but after 1-2hr mouse is also not working properly. I connected to external monitor then touchpad is working fine without any issues. Kindly help me and tell me the root cause.
    Thanks

    Hey @ashfaque91 ,
    Welcome to the HP Forums!
    I understand the touchpad and mouse are not working on your notebook after having your display serviced.
    It seems quite odd that they would work fine on an external monitor, and to be totally blunt this is something I cant even attempt to explain. 
    Was this service provided by an HP service provider or was it done by an independent provider? 
    Try using the notebook in safe mode to see if there is an issue with the display driver causing some kind of wonky issue. Without knowing which version of Windows you are running I cannot tell you exactly how to boot safe mode on your notebook, but you can find this information easily by searching "Safe Mode Windows #" in Google.
    Other than this I would suggest getting back in touch with the service provider if the issue started immediately after they provided service to the notebook.
    Alternately, you can call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the following link to get the support number for your region: Phone Assist Worldwide.
    Thanks!
    Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    The Great Deku Tree
    I work on behalf of HP.

  • Applications not working properly after updating t...

    After eventually updating to symbian Anna, I've noticed that some applications are not working properly, notably AccuWeather and Facebook. Uninstalled AccuWeather and re-installed it but still didn't work . Seems pointless releasing a software update and then to discover that applications from Ovi store won't work on your device! With Facebook I can only login in to my account but when I go to view a friend etc, it shuts down. 
    Has anyone any suggestions or solutions to the problem?
    Thanks

    i updated to the latest version 025.007 on my E7 too and a lot of the apps on the store dont work. Just blank screens.
    Somebody do something!!
    I use other devices, and havent faced this problem with any of them after an upgrade!

  • Camera led is not working properly after update

    After updating to IOS 6.0.1 led is not working properly.
    When filming , the led is burning very weak, and when lightsetting is turned to
    automatic not at all.

    Reset your phone first, hold the home and off button down until the apple symbol comes up. If that doesnt do it, then do a restore from your backup in itunes.

  • Plug and play speakers not working properly after upgrading to Windows 8.1

    After upgrading to Windows 8.1, my plug and play speakers do not work properly.  I have uninstalled and reinstalled them, and restarted.  When I try to play music, nothing comes out.  If I turn them off and back on, music will play for approximately 30 seconds, only from one speaker, then it turns off and fades to no sound.  They worked fine until I upgraded to Windows 8.1.  The manufacturer has not been able to successfully assist me.  Has anyone else reported a similar issue after upgrading OS software?  Any suggestions?  These are fairly new speakers, less than 2 years old, and not used very much.  I do have them installed via a K-V switch, and all other devices linked to the K-V switch are functioning properly (monitor and wireless keyboard).  Any suggestions would be greatly appreciated.

    @sisboldt ,
    Hello and thank you for posting on the HP support forums.
    So that I can better help you with your sound issue.  Please post back with your full model and product number.  Use this link to help you find the information.
    HP Notebook PCs - How Do I Find My Model Number or Product Number?
    Here is another link you may find useful.  Please give it a read before posting back with your system information.
    Advice for asking the "Very Best Question"
    Thank you again for posting and have a great day.
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    D5GR
    I work on behalf of HP

Maybe you are looking for