Reconnect with lost conference calls without having to hang up and redial.

I'm having a problem with conference calls on my iPhone 5. If while on a conference call, I lose one of the other callers, I cannot get that caller back unless I hang up and start the whole call over. Does anyone know how to avoid this?

Here's the trick.
turn on the headphones.
It will connect to the device it last connected to ...assuming that its' on.
go to the bluetooth menu of your phone or ipad (if it's a computer you want to connect to I'll tell you that trick in a second.
and so now, hold down the S button on the headphones for about 4 or 5 seconds (the same button you use to turn on the headphones) ...the light goes from blue to blinking red....now you're in the pairing mode...which is good...now in the bluetooth menu simply select the mm100 and it will connect...
you won't have to type in the 0000 or tell it to forget the device..
but by holding down the button and putting it in pairing mode it frees it from being connected to the device it automatically connected to and lets it connect to the device you choose. this is true of any bluetooth headset.
if you want to connect to your computer, again...hold down that button on the headphones for 4 or 5 seconds till it enters pairing mode, then on your computer if you have a speaker icon in the menu bar, hold down the option key while selecting the speaker icon...you'll see a list of devices ...select the mm100 and your good to go.
if you don't have the speaker icon there..go to system prefences and choose the mm100's there.

Similar Messages

TS1741 i lost my appletv remote & can no longer connect to it with my iphone app. is there any way that i can reconnect with my iphone app without having to buy a new remote?

i lost my appletv remote & can no longer connect to it with my iphone app. is there any way that i can reconnect with my iphone app without having to buy a new remote?

Doubtful - why did the Remote app lose connection?

HOW CAN I GET ITUNES TO ACCEPT MY IPOD WITH MAC GENERATED MUSIC WITHOUT HAVING TO RESTORE IT AND LOOSING ALL MEDIA??

MY IPOD XMAS GIFT HAS MUSIC GENERATED ON A MAC. ITUNES WILL NOT RECOGNIZE IT ON MY PC WITH WINDOWS 8.1 UNLESS IT IS RESTORED WHICH ITUNES STATES WILL WIPE OUT ALL EXISTING +1000 TUNES. WHAT OPTIONS DO I HAVE?

Hey JIM2209,
Thanks for the question. You can transfer certain types of media from your iPod to a new iTunes library. These include music, movies and TV shows that were purchased from the iTunes Store. If you have music imported from a CD or other source, iTunes can’t transfer this media back to a computer:
iTunes: Transferring media from your iPhone, iPad, iPod touch, or iPod
http://support.apple.com/kb/HT1209
Music imported from a CD or other source
- iTunes can't transfer this media back to your computer.
- Back up your iTunes library or use iTunes Match.
Thanks,
Matt M.

I want to hook up a mac mini and us my tv as a monitor. how can I use airplay from my phone on the mac mini like i can with an apple tv (without having to buy an apple tv!). the airplay capabilities i want to use are mirroring and streaming from my iphone

i want to hook up a mac mini and us my tv as a monitor. how can I use airplay from my phone on the mac mini like i can with an apple tv (without having to buy an apple tv!). the airplay capabilities i want to use are mirroring and streaming from my iphone!

Download AirPlayer for Mac - Transforms your Mac into an AirPlay-compatible display. MacUpdate.com

With recent calls , is it possible to save certain calls without saving them to contacts and delete the ones i dont want?

My question is ,
with the recent calls is the a way to save certain calls without saving them as contacts, and delete the others that i dont need? I am a truck driver and i need only certain calls during the day and if i could delete only the ones that arent needed for the day and keep the others that would make the day run smoother. Each is different and when the day is finished then i would delete the ones i needed for the day and start all over again. Is this possible?

I think you would have to reinstall the keys seeing that if you format the computer all the data is gone. Even though you backed up that data you never know what can happen when you try to reinstall certain apps. Not sure what method you can go by, you should run a diagnostics test to see how you computer is doing internally.
Goodluck

I got problem with volume of calls...its on max and i still can hear person on other side really bad...i got 4s

i got problem with volume of calls...its on max and i still can hear person on other side really bad...i got 4s

Did you fix the problem? I have the same problem and it has been pain in the neck.

How do I setup my devices with a new computer without losing all my apps and data?

How do I setup my devices with a new computer without losing all my apps and data on my devices?

Move your iTunes library to a new computer. See these links for instructions:
http://support.apple.com/kb/HT1660
http://support.apple.com/kb/HT1589

I am not able to answer a call without having a headset

I am not able to answer a call on my iPhone 4S without having a headset. Bluetooth is turned off.

Try inserting and removing the headphone plug several times. Also, have you removed the protective film that the phone ships with? It covers the earpiece hole. And if you switch to speakerphone does it work?
It may be obvious, but have you tried raising the volume with the volume buttons on the left side of the phone while on a call? If you are not on a call the buttons only charge ringer volume.

How do I use the same bluetooth device with different iOS devices without having to "Forget" then "Pair" every time?

Hi,
I have bought a pair of Sennheiser MM100 wireless headphones and they are great, however, I'm having trouble switching between devices.
I have an iPad2 and an iPhone 4s and the headphones connect to both with no problems. My issue comes when I want to switch from using the headphones with my iPhone (listening to music on the walk to the train station) to using them with my iPad (to watch a movie on the train). The iPad still shows that it is paired with the headphones but will not connect saying that they must be turned off or out of range. Even if I turn the headphones off then on again, they immediately reconnect with the iphone.
I've tried deselecting the headphones as the source for audio from the airplay icon before I make the switch and have also done this before turning them off and then back on again.
The only way I can make the switch is to turn the headphones off, tell the iPad to forget the device, turn the headphones on (by holding the on button for 5 seconds it automatically goes to Pair mode). I pair up the iPad and it connects fine. But I have to go through the same process when the train pulls into my stop to be able to use the headphones to listen to music to walk to work!
Is there an easier way? I thought I would just be able to use the airplay icon to deselect it on one device and select it for the other.
Any help would be much appreciated. I'm going to miss my stop on the train some day!!!

Here's the trick.
turn on the headphones.
It will connect to the device it last connected to ...assuming that its' on.
go to the bluetooth menu of your phone or ipad (if it's a computer you want to connect to I'll tell you that trick in a second.
and so now, hold down the S button on the headphones for about 4 or 5 seconds (the same button you use to turn on the headphones) ...the light goes from blue to blinking red....now you're in the pairing mode...which is good...now in the bluetooth menu simply select the mm100 and it will connect...
you won't have to type in the 0000 or tell it to forget the device..
but by holding down the button and putting it in pairing mode it frees it from being connected to the device it automatically connected to and lets it connect to the device you choose. this is true of any bluetooth headset.
if you want to connect to your computer, again...hold down that button on the headphones for 4 or 5 seconds till it enters pairing mode, then on your computer if you have a speaker icon in the menu bar, hold down the option key while selecting the speaker icon...you'll see a list of devices ...select the mm100 and your good to go.
if you don't have the speaker icon there..go to system prefences and choose the mm100's there.

How to use Apple TV with Logitech Harmony remote WITHOUT having to unpair?

I have a Logitech Harmony 880 remote which I am trying to set up with my new Apple TV.
Within the Logitech software I set up Apple TV as a MediaCenter PC device.
I've followed these instructions already.
http://logitech-en-amr.custhelp.com/app/answers/detail/a_id/8480
The Harmony remote works great with the Apple TV if I follow these instructions to unpair the remote EVERY time I want to use it. Once I turn the TV off or switch to another activity, it loses this setting and I have to unpair again when I go back to Apple TV.
I would like to be able to use my Harmony Remote without having to unpair constantly.
I have tried to pair the Apple TV with the Harmony remote. This only served to render my Apple Remote nonfunctional and I still have to unpair every time.
I tried to use the Harmony remote's IR learning mode directly with my Apple Remote instead of using the settings from the database. I still have to unpair every time.
I tried to go into the Apple TV > Settings > General > Remote and have Apple TV learn my remote's IR. There are instructions to hold down each button until a progress bar is full. The first button is the up arrow. The progress bar never activates when I push the up arrow on my Logitech Harmony remote although I know the Apple TV is somewhat recognizing the button press because I hear an auditory beep and see the led light on the front of the Apple TV flash when I push the button. None of the arrow buttons of the Harmony remote would activate the on screen progress bar although some buttons such as the Volume buttons would.
At this point, I resigned myself to having to unpair every time I accessed my Apple TV so I thought I would get smart and program the unpair button to show up as one of the additional buttons on the lcd screen of the Harmony Remote when I start the Apple TV activity. I'm sure by now you can see where this is going. My attempts to outsmart my advanced technological devices failed dismally as it seems the unpair option of the Harmony remote will only function correctly if I first press the Devices button and then choose the Apple TV.
I was wondering if anyone had gotten a Logitech Harmony remote to work successfully with the new Apple TV without having to use the unpair command every time and if so, what did you do to resolve this issue?

I'm having the same issue except that I set up the Apple TV as a Media PC on my Harmony 770 and that gave me the unpair addition button that actually works. Per your idea, I've been using that to gain functionality of my Apple TV 3 from the Harmony remote.
However that's just a workaround. I've gone a step further and learned the raw commands and it still won't work. This makes me think the issue is on the Apple TV refusing to recognize the remote unless you press "unpair" everytime.
Is anyone else having this issue on the current Apple TV 3 firmware?

Is it possible to use Time Capsule with Apple TV? Without having our macbook pro, iPhones or iPads as middle link?

Hi there.
I wanted to buy a time capsule - But my big question is : Is it possible to use the time capsule with Apple Tv ( Newest generation.) without having an Iphone, Ipad or mac as middlelink?
So if I example want to have all our music and dvds on the Time Capsule and watch/hear it on my TV. Do I have to have one of our macbook pro's started up to get it to work?
Hope you understand what I'm trying to say here.. ? Hehe.
Best Regards
Christian

But then I can have all dvds and music on a time capsule and then run it via itunes on my mac and from there to the apple tv
Yes, if you move the iTunes Media Folder to the Time Capsule.
But.....if you move the iTune Media Folder to the Time Capsule.....how are you planning to back up this important data?
(You will lose everything in the Media Folder when.....not if....the Time Capsule has a problem and you do not have a backup copy.)
A much safer plan would be to keep the iTunes Media Folder on your Mac.....or add another hard drive connected to the Mac and move the Media Folder to that drive.
Then Time Machine will backup both your Mac and and hard drive. So, you have "originals" on one drive and backups on another.

Skype Worldwide calling WITHOUT HAVING TO GO THROU...

We got a free one month trial for calling via Skype worldwide. In that period our Visa credit card expired. When Skype tried to automatically renew the service - now to be a paid service - after the one free month, it used the expired Visa card. It did not renew of course. Now we want to buy this worldwide calling service, using a new, valid Visa card. On-line Skype keeps offering us the free one month trial only. And than says we do not qualify because we already had a free trial. How can we renew/reactivate worldwide calling without going through the free trial option? Advise please.

i see a lot of threads about charging the battery.
i sell high end digital cameras, have for 6 years now. i'm not talking the stuff you find at fry's but the really high end stuff.
this stuff also uses proprietary lithium ion batteries (actually the only thing proprietary is the connectors, all cells come from the same manufacturers)
the key to lithium ion batteries is:
) let it charge overnight the first time you charge it
2) it takes about 3 full charges and full drains to get the proper life out of it
3) they dont have memory, ever. i have several abused lithium ion camera batteries that can attest to this
4) replace after 8 months without fail
my point is, don't stress over it. my micro only got about 7 hours of continous playback with eq on and it just sitting there, and not much more with eq off. the player's life on a single charge and constant crashing when switching off are the only reasons why i returned it on sunday for an ipod mini.

How to change unlinked subreport with a newer version without having to delete and recreate in the main report?

I am using crystal reports version 11 and have inherited a report with 5 sub reports. Here we version the each report that contains changes. Is there a way that I can change the pointer for the sub report to the latest version? The person who gave me these reports stated that he deleted the old sub report and inserted the new sub report. The issue with doing this is you lose all you positioning and have to perform these tasks again. This seems like a lot of work especially if the upgrade to the sub report was only cosmetic. If I could update the link with the new report name it would make things easier.
Appreciate any assistance and thank you

I had a similar situation where i had 4 different main reports that has 20 sub reports each.
Best steps i figured out to keep track is:
1- I do not create a sub report on the fly. (origanlly- sub reports were built by "create a sub report with the report wizard"
so First i save all the sub-reports independently, and gave them corresponding name to their data fetch.
On inserting report as a sub report i used the option "Choose an Existing Report"
2- Since i had 4 different report, i created 4 seprate folders for each report. And then Sub folders for Sub reports.
3- Any changes in the sub report would have a different copy, and saved with the date stamp. In summary info, Comments section, I will type the update detail.
For Formatting changes alone:
I create a fake group inside the report and drop a Text box. The box would have comments about the formatting and suppressed (only to seen at design mode).
Hope this helps.

I want to be able to organize my photos like I could with my old pc without having copies of the same pictures in the photos section, the events section, the places section etc

Please help me with organizing my pictures into folders in iphoto

You need to rethink organizing photos - iPhoto is a SQL database program that organizes photos - you are thinking about organizing files rather than photos
I Photo never makes copies of photos - it does have two or three different versions of a photo but no copies - and this is the way it works - you can not change that
The way to organize in iPhoto is to use the database tools provided - events are just a simple basic bucket of photos - you organize using faces, places, albums and folders - with ratings and keywords to assist
Mine are organized on the old high school journalism 5 Ws - who, what, where, when and why - faces for who, places for where, the camera supplied date/time for when and keywords for what & Why
Then with albums, smart albums adn folders organization is simple - and with the search window finding any photo is simple
If you want to organize files then use the finder and preview for viewing photos - if you want a powerful Digatal Asset Manager (DAM) use iPhoto
LN

Using Equalizer presets without having to switch on and off

Hi,
I have assigned equalizer presets (eg. Equalizer preset = Dance) to a minority of songs in iTunes on my Mac. Most songs have no preset, so the setting is blank (Equalizer preset = None).
The problem is that I can only get these settings to work by manually switching the EQ 'on' and 'off' by checking and unchecking the 'on' button in the Equalizer window.
Can I combine presets and no presets in one playlist without having to manually switch the EQ on and off? If so, please tell me how. Thanks!
iMac G5/17" Mac OS X (10.3.9)

iTunes will change the EQ to a setting but not back to nothing.
If your listening to a dance track with the EQ preset on Dance then thats fine. But continue on too listen to a rock track where the EQ preset is none and iTunes will continue to use the Dance EQ. The only way i can think of to get around this problem is to set EQ presets for all songs. If you have a large library its easiest to do this by browsing by genre and changing whole genres at once.
There is no software i know of that helps prevent your EQ problem though sorry

Reconnect with lost conference calls without having to hang up and redial.

Similar Messages

Maybe you are looking for