Reconnecting a mobile unit with windows mobile

how do I reestablish a windows mobile connection?  I had to break the partnership now I cannot reconnet a Trimble recon.

Hi MontanaMo,
"Windows Mobile software "
Do you mean you are using  Windows Mobile Device Center ?
If that is the issue ,please take the following steps to have a check :
1.Keep your Mobile device connected to the computer.
2.From the desktop, click Start, and then type devmgmt.msc in the Search programs and files box.
3.In the Device Manager window, look under the Network adapters node for Microsoft Windows Mobile Remote Adapter. If this is not present, go to step 5. Otherwise, right-click Microsoft Windows Mobile Remote Adapter, and then select Uninstall.
4. Look under the Mobile Devices node for Microsoft USB Sync. If this is not present, go to step 6. Otherwise, right-click Microsoft USB Sync, and select Uninstall.
5.Disconnect and then reconnect your device. Your device driver will be reinstalled, and Windows Mobile Device Center will be launched.
Here is a link fore reference :
Description of Windows Mobile Device Center
https://support.microsoft.com/en-us/kb/931937
Here is another link for reference:
I can’t connect my Trimble Windows Mobile device to my computer?
http://fpimapping.com/i-cant-connect-my-windows-mobile-device-to-a-computer/
NOTE: This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control these sites and has not tested any software or information found on these sites.
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

  • I have the iphone 4 and PC with Windows Vista Basic. When I bought my iPhone syncs with iTunes on my computer, but now when I try to sync it tells me that Mobile Device Service was closed and I can not synchronize the phone. Try restarting Mobile Device S

    I have the iphone 4 and PC with Windows Vista Basic. When I bought my iPhone syncs with iTunes on my computer, but now when I try to sync it tells me that Mobile Device Service was closed and I can not synchronize the phone. Try restarting Mobile Device Service and uninstall and reinstall Itunes but still giving me the same error.

    http://support.apple.com/kb/HT3965

  • Broken ATI Mobility FireGL V5700 for W500 with Windows 7 - 64 bit

    Hello all,
    My setup is Lenovo Thinkpad W500 with Windows 7 - 64 bit
    Display card is a ATI Mobility FireGL V5700
    My graphics drivers used to be functional but now I have lost a lot of functionality (mostly graphics issues).
    My two biggest issues are:
    Many video games will crash/break because of my drivers apparently
    Lost switchable graphics completely (the ability to change from FireGL V5700 to the low power card)
    To clearly state: It is impossible to download these drivers from AMD, AMD themselves tell you to go to Lenovo
    This is because Lenovo is responsible for the display card drivers in their own laptops.
    I have not modified my computer. I believe that Lenovo's updates broke my laptop's functions.
    How do I FIX this??
    Nothing works from Lenovo's website. I've installed all their updates and the issues persist.
    The Lenovo Solution Center tells me that everything is up to date.
    Windows Update tells me everything is up to date.
    I am NOT reformatting my computer, that is a rediculous thing to say when everyone is clearly having this issue.
    What is the deal here? This laptop cost a very large amount of money and now it just broke itself? I don't believe it.

    Ok thank you, this is likely a BIOS related issue now.
    As you can see, Power Manager does not provide a switchable graphics option:
    Device Manager only recognizes the high power graphics card (FireGL V5700) and not the low power card
    Here is my BIOS settings for the display adapter:
         Default Primary video Device: INTERNAL
         Boot Display Device: THINKPAD LCD
         Graphics Device: DISCRETE GRAPHICS
         OS Detection for Switchable Graphics: DISABLED

  • Compatibility with Windows Mobile 5.0 ?

    Does anyone know if Flex apps would work on PocketPCs, ie.
    using Windows Mobile 5.0?
    I haven't purchased one yet, so I can't test.
    At this link, Adobe identifies Flash Player 7 for Pocket PC:
    http://www.adobe.com/products/flashplayer_pocketpc/
    This page identifies FlashLite 2.1 which seems to be based on
    Flash Player 7
    but includes Action Script 2.0 support:
    http://www.adobe.com/products/flashlite/
    Does anyone know for sure? We'd like to do some monitoring
    & reporting
    in Flex & make it available on the go for people, but
    don't want to go buy the phones
    until we know it is possible.
    Thanks

    >I have a Windows Mobile 5.0 device (Verizon PPC 6700) and
    just bought a
    >small
    > app that requires Flash 6.0. This site talks about 7.0
    being the latest
    > (and
    > being backwards compatible). I installed the app by
    placing the .cab file
    > on
    > my device and clicking on the file...which kicked off an
    install program
    > on the
    > device and it seems to have installed correctly. I
    rebooted the device
    > but
    > don't see any setting / programs for Flash 7.0 (although
    it does show up
    > in add
    > / remove programs). Is this installed correctly? My
    purchased app won't
    > run
    > and it's supported on this device as well....the
    developer is blaming
    > Flash and
    > telling me it's not installed. The Flash 7.0 download
    page indicates
    > compatibility with Windows Mobile 5.0....any advice?
    Can you see this on your device?
    http://www.tomorrows-key.com/pdademo/mrttpda.htm
    If so, then Flash is installed fine. Note, though, that Flash
    content will
    only play when viewed in a browser (html file) or when
    embedded in an
    application using ActiveX or similar. So if you are tryting
    to play a swf
    file, that won't work.
    Steve

  • Can i install VS 2013 in my Virtual Machine with Windows 8.1 and work for Mobile Development,Mobile Emulator can work in my Virtual Machine ?

    I have a Virtual Machine with Windows 8.1 OS and 4gb RAM, 200gb Disk.
    I want to develop apps for Windows Mobile 8.1 with VS 2013 Update 4, Mobile Emulators can work in my Virtual Machine, bcz i am getting bellow error.
    Windows Phone Emulator is unable to verify that the virtual machine is running:
    Something happend while starting a virtual machine:'Emulator 8.1 WVGA 4 inch 512MB.APPUSER' failed to start.(Virtual machine ID xxxxxx-xxxxx-xxxx-xxxx-xxxxxxx)
    The Virtual Machine Management Service failed to start the virtual machine 'Emulator 8.1 WVGA 4inch 512MB.appuser' because one of the Hyper-V components is not running (Virtual machine ID xxxx-xxxxx-xxxx-xxxx-xxxx).

    No you cannot do that.  You need a physical machine that supports Hyper-V
    Jeff Sanders (MSFT)
    @jsandersrocks - Windows Store Developer Solutions
    @WSDevSol
    Getting Started With Windows Azure Mobile Services development?
    Click here
    Getting Started With Windows Phone or Store app development?
    Click here
    My Team Blog: Windows Store & Phone Developer Solutions
    My Blog: Http Client Protocol Issues (and other fun stuff I support)

  • Treo 750 with windows mobile 5 and windows 7 compatability

     Help please. Can I get a update/download from microsoft for the windows 5 mobile o/s on my treo 750.  To make it compatible with windows 7 ?
    Post relates to: Treo 750 (AT&T)

    Hello everyone. I apologize for reusing this very old post but I got my hands on an old Palm Treo 750 with Windows Mobile 6 working properly but I could by no way get it synchronized via usb with my Windows 7 laptop. I tried the suggested solution but still I get the Device not recognized from the windows installer- Colud you please somehow help me? Many thanks
    P.S. I downloaded the program from the link but when launching it as admin nothing happen...

  • Qualcomm Mobile Broadband Gobi2000 compatibility issue with Windows 8 and above

    I am facing Qualcomm Mobile Broadband Gobi2000 competibility issue with Windows. Previously, after installing windows 8, I faced a problem of random shut down. But, after running registry and malware scan, it's now almost settled . But, my Broadband modem randomly stops working , and Windows Action Centre points it out as "USB Modem Qualcomm Mobile Broadband Gobi2000 is not competible with current version of Windows". It further suggest to contact HP for resolving the issue.

    I have called HP-Support and the answer was:
    «Thank you for contacting HP Active Chat Support.
    This is in continuation to our response with regards to your chat ID: 63381567
    As for the case logged in for compatibility issues after upgrading to windows 8.1, kindly try the steps below and see if that helps.
    Start the computer.
    Press the F10 key to enter the BIOS setup.
    Select Restore Defaults .
    Under Load Defaults , select Yes .
    Choose Save Changes and Exit .
    Under Save Changes and Exit , choose Yes .
    If Microsoft Windows does not recognize the external USB WWAN modem module, try the steps below:
    The Telephony Service has been disabled. Follow these steps to enable the Telephony Service:
    Open Control Panel .
    Expand View by: and select Large Icons .
    Click Administrative Tools .
    Double-click Services .
    Double-click Telephony .
    Under the General tab, expand Startup Type , then select Automatic .
    Click Apply , click Start , then click OK .
    Restart the system.
    If the issue still remains the same, kindly contact Microsoft or we would request you to be patient while we have more drivers available on the HP website.»
    The issue was not resolved.
    So I'm waiting for the release of the new driver...

  • Sync with windows mobile

    how can I sync my macbook with windows mobile?

    For a Windows Phone 7 you can use this http://itunes.apple.com/us/app/windows-phone-7-connector/id415571499?mt=12
    For an 'older' Windows phone 6 this http://www.markspace.com/products/windowsmobile/mac/windows-mobile-sync-software .html
    Stefan

  • Synchronization with Windows Mobile

    I got my new computer last week... A brand new MacBook Air!
    After working professionally with computers for many years, i decided to leave the domain of Windows and buy a Mac... This leaves me...
    Completely disappointed!
    When trying to synchronize my cell (a Sony-Ericssion Xperia, X1) I find that there are MAJOR issues concerning synchronization. Yes, there´s a third party program that calims to do the job - Missing Sync. The name itself would make anyone suspicious, and yes, it is the missing link... Totally un-reliable and actually succeeds in synchronising most parts wrong. Finally you find out that it is uncapable of synchronizing emails at all, even if you are running Microsofts Entourage...
    Guess that no people that´s a part of the holy Mac church likes to talk about this?
    Integrational issues between Mac - Windows doimain is not at all solved, and I am very unhappy.
    How can I synchronize my X1 with my Mac, similar to the functionality in Windows?
    Please help me!
    Kind Regards,
    Rickard

    Please have a look at the sales pitch for Mac on the web site, stating that there are no problems what so ever when it comes to integration with Windows.
    Which integration issues are you referring to? Macs & Windows PCs can co-exist on networks perfectly, they can share files, share documents from the same applications. What integration issues are you having?
    Yes, X1 is a rather new cell phone, but not at all the first cell using win mobile
    No, but the first from Sony Ericsson, so it's not going to be exactly the same as previous Windows Mobile devices from other manufacturers. With a new implementation of Windows Mobile, on new hardware, from a new manufacturer, there's bound to be issues to resolve. Especially as the third-party developers do not have access to the same resources as the OS or phone manufacturers themselves do.
    Why don't you complain to Microsoft or Sony Ericsson because they don't provide Mac users with the same tools to use their products as they do for Windows users? They're potentially missing out on an increasing market.
    Blackberry users have the same problem, so it seems.
    Blackberry owners have two options for syncing with Mac - one from RIM themselves, and one from Markspace.
    Mac has an own distribution of Office, nice but it is not compatible with any other Office pckage when it comes to data migration...
    Yes, it is. The current Mac versions of Word, PowerPoint and Excel and share files with the current Windows versions. As stated on Microsoft's web-site, +"Office 2008 for Mac and the 2007 Office suite for Windws share the same default file format"+
    In my day job I have to share files with Windows users all day long... no problems at all.
    it is most unfortunate that I cannot leave the windows domain behind me
    But, you've just bought a brand new +Windows Mobile+ based device - so that would suggest you don't really want to leave Windows behind completely... Why would you choose that over an S60, Symbian, OS X or other non-Windows-based device if you want to leave Windows behind?
    Stating "you can install windows on it" is not helpful.
    Well, it is if you want to use devices which are currently only supported under Windows. You have no other choice.

  • Pocket PC 6700 With Windows Mobile Java ISSUE

    Somebody Please help me! I bought a Pocket PC 6700 With Windows Mobile 5.0. I am trying to run an ".aspx" java supported extension for my Scottrade streaming quotes screen on my Pocket PC. Is there ANY java programs/downloads/patches, anything that will launch this app. with what I got? Im looking for a solution to this problem. Ive came across some research of it being a liscensing problem but I would think this kind of technology would be taken advantage of at this point with these new pocket PC's
    Thanks,
    Eric
    Message was edited by:
    ecw2

    Hello,
    I've had my PPC 6700 (Windows Mobile 5.0 pone/PDA) for a little over a year now, and I am in the same boat. I am using Bank of America for investing/trading and can not use the online streaming quotes, which is a java based tool for real time stock quotes....
    I also have done plenty of research with no success. I have tried several Windows Mobile 5.0 compatible browser like: opera, netfront, etc. but noting seams to do the trick.. Is there a version of Sun Java for Pocket PC's?
    Can anyone help?
    Message was edited by:
    rolyscity

  • JVM & HP iPAQ with Windows Mobile 2003 SE

    Hi,
    what kind of JVM can I use on HP iPAQ with Windows Mobile 2003 SE. I don't know what configuration should I use, if CLDC or CDC.
    Thanks for replies.

    Hi;
    For the configuration i think its CDC, as the ipaqs have a big memory as using CLDC, but for the JVM, i don't know,
    if you find the answer plz send it to me at [email protected]
    good luck.

  • May i use firefox in my Samsung SGH-i780 with windows mobile 6.0

    may i use firefox in my Samsung SGH-i780 with windows mobile 6.0

    Sorry, we are not developing Firefox for Windows Mobile.
    Firefox is available now for Nokia Maemo phones, and we are working on a version for Google Android phones.
    For more information, see:
    https://wiki.mozilla.org/Mobile/Platforms

  • I get an error message when installing itunes with windows 8, error message is error occured while attempting to create the directory C:\program file(x86)\common files\apple\mobile device support\sync services\schemas\outlook.syncschema

    I keep getting an error message when installing iTunes with windows 8

    See the second box in Troubleshooting issues with iTunes for Windows updates.
    tt2

  • SAP Mobile Platform 3 compatibility with windows server 2012

    Dear All,
    As per SAP release notes Window Server 2012 is compatible with SMP 3.0 but after installation i see that the SMP3 Services are always into the hung state meaning they neither start nor stop. They are always in the starting state. Whereas it runs fine with Windows Server 2008 R2. When we force kill all the process running with SMP3 Service we can stop it but it doesn't start at all.
    Has anyone faced this issue till now.
    Thanks

    Hi Rakshit,
    I guess Eric Solberg, Mustafa Saglam can answer better.
    Rgrds,
    JK
    PS: Raise a SAP ticket.
    Message was edited by: jitendra kansal

  • I have a legit copy of 4.3 on an old unit. Can it be burned on a dvd and installed on new PC with windows 8.1?

    I have a legit copy of 4.3 on an old unit. Can it be burned on a dvd and installed on new PC with windows 8.1?

    Yes, one you have your LR 4 user license. (if it was an upgrade from an earlier version then you will also need the earlier version license key.)
    You can get the latest update for LR 4 from the link below, and install that instead of the 4.3 version.
    http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Windows

Maybe you are looking for