Reconnecting clips weirdness no file path listed

Every time I open my project I have to reconnect 10 clips.
7 of the clips have no file path. Does anyone know how to fix this?
Here's a snapshot http://snipr.com/uw311-q2w

Tom Wolsky wrote:
"Do you know what files it's looking for? What are the exact names of the media files?"
At least give us the exact clip names? Something.
God I wish I did, then I could reconnect the clips. How can I find this out if all it says is "Macintosh HD:" and blank space? Is there some other utility I can use?
Copying to a new project won't do anything if the file path is broken. Do you know where >the media is? Presumably in your capture scratch.
yes it's in my scratch.
I figure if I first make a copy the of project file, open this, then delete unused sequences out it may resolve the issue as the sequences that I need to play work fine. I figure it's trying to resolve clips from sequences I could give two ***** about. Maybe then it would stop trying to locate that data.
I dunno... I'm a Mac Consultant and this issue has me baffled.
I even bought FCS Suite to clean up my FCP system, but figured it wouldn't solve this problem and it hasn't.
Brandon

Similar Messages

Part list of File Paths list

Hi all!
In file I/O functions if file path is empty (default value) or is Not A
Path, the VI displays a file dialog box from which you can select a file.
How can I make LabView to display only part of the list of File Paths by
giving it some string which has to appear in all the Paths displayed.
Thanks!
M. Katz

With the built-in file i/o examples that ship with LV you can't. The problem is that while the low-level file i/o functions allow you to specify a pattern that limits the listings, that input isn't propegated up to higher level functions in their example code (which you probibly shouldn't be using in deliverable code anyway). If you let me know what file i/o you need specifically I can send you a function that will do what you need...
Mike Porter
[email protected]
"...after all He's not a tame lion..."
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

How to get a list of file paths for all files used in a project

I have a project in Premiere Pro CC which has a large number of bins. A sequence in one of these bins uses files from other bins. I am trying to find the locations of all each of the files used in the project.
1) Obviously I can select each clip in the timeline and show in finder, but there a lot of clips
2) The video usage associated with each file in the project would help. However
1. I haven't found a way to display only clips that have video useage if all of the bins have not been expanded.
2. Video usage shows usage for all sequences, so one would have to manually check the pull down for each file to see if it is used in the sequence in question.
3) I tried exporting the project to final cut pro xml. The path url gives me the information that I need. For some reason, however, when I do the export only one clip's information is there, not the information for all of the other clips in the project.
4) I tired an export for speedgrade and all of the file names are there. However the paths are not.
Basically I want to find all of the files in the project and relocate them to a specific folder for that project. There's got to be a way to do this but I'm not seeing it ....

Thanks for the suggestion concerning the file path. And certainly it would have been nice to have done this before beginning. However this is a project that has been around for quite a while, and the files have been moved into different bins. And now the project sequence is being revised.
So the problem is, worded slightly differently, how can I search all of the bins for the files that are used just by this sequence, ignoring the files which are used by other sequences? Or, how can I get a list of the file paths of the files that are used in the sequence?

Outlook - The path specified for the file SharePoint Lists PST is not valid

Some users are connecting via Citrix XenApp to Microsoft Server 2008 R2 and using Microsoft Office 2010 (14.0.7109.5000) SP2 MSO (14.0.7116.5000) - Microsoft Office Profressional Plus 2010 x86 version for their email. Microsoft Exchange Server 2010
SP2 for email.
They are connected to Microsoft SharePoint 2010 SP2 August 2013 CU, via a SharePoint Calender; they have View permissions to the SharePoint calendar using Classic Mode permissions (Not Claims). No permissions have / are changing on this SharePoint
Calendar. They connect to the SharePoint Calender to Outlook.
When they open up their Office Outlook client, they receive an error "Outlook Data File" "The path specified for the file \AppData\Local\Microsoft\Outlook\SharePoint Lists.pst is not valid." OK
They select OK and they get a window popping up with the option to try to find the SharePoint list. "Create/Open Outlook Data File" (File name: 'SharePoint Lists') Open Cancel. They select Cancel.
They are returned to their Outlook client "email."
As an I.T. administrator and SharePoint Administrator, I had a remote session with them, using Bomgar software and I Go to File Menu, Account Settings, SharePoint Lists Tab but there is no list there so go to the Data Files tab and see SharePoint Lists listed.
Selecting it once, and clicking on Settings... button gives error message similar to the one above about PST not valid.
STRANGE in that, when you do that! You can go to Home tab, Calendar (Ctrl+2), and see Other Calendars and now the SharePoint calendar that was supposed to be there before, but was just "empty!" There was only the Other Calendars
option but it didn't have any "sub" calendar item.
A similar issue is when Other Calendars is listed, and has a sub calendar listed, a SharePoint connected calendar. You click on it and get "Microsoft Outlook" "The set of folders cannot be opened. The path specified for the file c:\Users\USERNAMEHERE\AppData\Local\Microsoft\Outlook\SharePoint
Lists.pst is not valid." OK
Click OK and go through the above steps to get the same result. After going into Account Settings, Data Files, checking on the Settings... button, and receiving the error message, again mentioned above, and the prompt to Create/Open Outlook Data File,
thgen I can go back into Account Settings, Data Files, and double click on the SharePoint Lists and instead of an error, the Outlook Data File comes up, with Change Password... Compact Now, Comment, Name, Filename, Format (Outlook Data File) OK Cancel.
Can go back to the Calendar (Ctrl+2) and Other Calendars, and the SharePoint Calendar "Sub calendar" will appear and operate as normal! All was done was go into the Account settings and "check" on the "error."
Tried to delete the SharePoint Lists and close out and add it and then go back in, and it "worked" for a few days. I later turned on Logging and for over 24 hours it was on for the user. The user was not on forever.
In the Outlook Logging folder, from the users profile, I found many *.log files, firstrun, OPMLog, ETL files, one of which is 6MB, and some prof_001_outlook....txt files. I clickedo n the SharePoint Lists.pst.log file 1KB
It is listed here:
Store File Name: SharePoint Lists.pst
Date|Time|Action|Search Owner|NID|Change Action|Change Semantics|URL|Count Of DocIDs|Next NID Index to add to All Msg folder|Next NID Index to push to FTE|Folder Path|Folder Path ID|HRESULT|Result Status
2014/05/23|08:10:22:672|SGD_ScOpenNode(fCreate=FALSE)||||0x80040818|FAIL
2014/05/23|08:10:22:672|SGD_ScOpenNode(fCreate=TRUE)|||||OK
2014/05/23|08:10:22:673|Marking store for re-push: Newly created store|0|||||||||||OK
2014/05/23|08:10:22:673|SGO_ScMarkPushEverythingDone|0|||||||||||OK
firstrun.log
*** Starting First Run (05-23-2014 07:32:08) ***
...HrPreSplashFirstRun called.
...HrPreLogFirstRun called.
...HrPostLogFirstRun called.
...deleting WAB4/UseOutlook because we're using MAPI.
...writing UUID to HKCU.
...setting Primary Client to Outlook.
*** Ending First Run (05-23-2014 07:32:26) ***
OPMLog.log
2014.05.23 07:32:28 <<<< Logging Started (level is LTF_TRACE) >>>>
2014.05.23 07:32:28 HELPER::Initialize called
2014.05.23 07:32:28 Initializing: Finding a Transport
2014.05.23 07:32:28 MAPI XP Call: XPProviderInit in EMSMDB.DLL, hr = 0x00000000
2014.05.23 07:32:28 MAPI Status: (-- -- ---/--- -- ---)
2014.05.23 07:32:28 MAPI XP Call: TransportLogon, hr = 0x00000000
2014.05.23 07:32:28 Initializing: Found a transport, Error code = 0x00000000
2014.05.23 07:32:28 MAPI XP Call: AddressTypes, hr = 0x00000000, cAddrs = 3, cUids = 1
2014.05.23 07:32:28 MAPI Status: (IN -- ---/OUT -- ---)
2014.05.23 07:32:28 MAPI XP Call: TransportNotify(BEGIN_IN|BEGIN_OUT), hr = 0x00000000
2014.05.23 07:32:28 HELPER::Initialize done, Error code = 0x00000000
2014.05.23 07:32:28 HELPER::GetCapabilities called, Error code = 0x00000000
2014.05.23 07:32:28 HELPER::Initialize called
2014.05.23 07:32:28 Initializing: Finding a Transport
2014.05.23 07:32:28 MAPI XP Call: XPProviderInit in EMSMDB.DLL, hr = 0x00000000
2014.05.23 07:32:28 MAPI Status: (-- -- ---/--- -- ---)
2014.05.23 07:32:28 MAPI XP Call: TransportLogon, hr = 0x00000000
2014.05.23 07:32:28 Initializing: Found a transport, Error code = 0x00000000
2014.05.23 07:32:28 MAPI XP Call: AddressTypes, hr = 0x00000000, cAddrs = 3, cUids = 1
2014.05.23 07:32:28 MAPI Status: (IN -- ---/OUT -- ---)
2014.05.23 07:32:28 MAPI XP Call: TransportNotify(BEGIN_IN|BEGIN_OUT), hr = 0x00000000
2014.05.23 07:32:28 HELPER::Initialize done, Error code = 0x00000000
2014.05.23 07:32:28 HELPER::GetCapabilities called, Error code = 0x00000000
2014.05.23 07:32:45 HELPER::Uninitialize called
2014.05.23 07:32:45 MAPI Status: (-- -- ---/--- -- ---)
2014.05.23 07:32:45 MAPI XP Call: TransportNotify(END_IN|END_OUT), hr = 0x00000000
2014.05.23 07:32:45 MAPI XP Call: TransportLogoff in EMSMDB.DLL, hr = 0x00000000
2014.05.23 07:32:45 MAPI XP Call: Shutdown, hr = 0x00000000
2014.05.23 07:32:45 HELPER::Uninitialize called
2014.05.23 07:32:45 MAPI Status: (-- -- ---/--- -- ---)
2014.05.23 07:32:45 MAPI XP Call: TransportNotify(END_IN|END_OUT), hr = 0x00000000
2014.05.23 07:32:45 MAPI XP Call: TransportLogoff in EMSMDB.DLL, hr = 0x00000000
2014.05.23 07:32:45 MAPI XP Call: Shutdown, hr = 0x00000000
2014.05.23 07:32:45 Resource manager terminated
2014.05.23 07:34:06 <<<< Logging Started (level is LTF_TRACE) >>>>
2014.05.23 07:34:06 HELPER::Initialize called
2014.05.23 07:34:06 Initializing: Finding a Transport
2014.05.23 07:34:06 MAPI XP Call: XPProviderInit in EMSMDB.DLL, hr = 0x00000000
2014.05.23 07:34:06 MAPI Status: (-- -- ---/--- -- ---)
2014.05.23 07:34:06 MAPI XP Call: TransportLogon, hr = 0x00000000
2014.05.23 07:34:06 Initializing: Found a transport, Error code = 0x00000000
2014.05.23 07:34:06 MAPI XP Call: AddressTypes, hr = 0x00000000, cAddrs = 3, cUids = 1
2014.05.23 07:34:06 MAPI Status: (IN -- ---/OUT -- ---)
2014.05.23 07:34:06 MAPI XP Call: TransportNotify(BEGIN_IN|BEGIN_OUT), hr = 0x00000000
2014.05.23 07:34:06 HELPER::Initialize done, Error code = 0x00000000
2014.05.23 07:34:06 HELPER::GetCapabilities called, Error code = 0x00000000
2014.05.23 07:34:06 HELPER::Initialize called
2014.05.23 07:34:06 Initializing: Finding a Transport
2014.05.23 07:34:06 MAPI XP Call: XPProviderInit in EMSMDB.DLL, hr = 0x00000000
2014.05.23 07:34:06 MAPI Status: (-- -- ---/--- -- ---)
2014.05.23 07:34:06 MAPI XP Call: TransportLogon, hr = 0x00000000
2014.05.23 07:34:06 Initializing: Found a transport, Error code = 0x00000000
2014.05.23 07:34:06 MAPI XP Call: AddressTypes, hr = 0x00000000, cAddrs = 3, cUids = 1
2014.05.23 07:34:06 MAPI Status: (IN -- ---/OUT -- ---)
2014.05.23 07:34:06 MAPI XP Call: TransportNotify(BEGIN_IN|BEGIN_OUT), hr = 0x00000000
2014.05.23 07:34:06 HELPER::Initialize done, Error code = 0x00000000
2014.05.23 07:34:06 HELPER::GetCapabilities called, Error code = 0x00000000
2014.05.23 07:35:12 [email protected]: Synch operation started (flags = 00000001)
2014.05.23 07:35:12 [email protected]: UploadItems: 1 messages to send
2014.05.23 07:35:12 EXECUTING Put MAPI TASK
2014.05.23 07:35:13 Starting the Spooling Cycle
2014.05.23 07:35:13 MAPI Status: (IN -- ---/OUT fl ---)
2014.05.23 07:35:13 MAPI XP Call: FlushQueues, hr = 0x00000000, ulFlushFlags = 0x0000001a
2014.05.23 07:35:13 Sending one message
2014.05.23 07:35:13 Progress: Sending message 'RE: Good Morning!' (size 14.76 KBytes)
2014.05.23 07:35:13 MAPI Status: (IN -- ---/OUT fl act)
2014.05.23 07:35:13 MAPI Status: (IN -- ---/OUT fl ---)
2014.05.23 07:35:13 MAPI XP Call: SubmitMessage, hr = 0x00000000
2014.05.23 07:35:13 MAPI XP Call: EndMessage, hr = 0x00000000
2014.05.23 07:35:13 FINISHED MAPI TASK
2014.05.23 07:35:13 [email protected]: ReportStatus: RSF_COMPLETED, hr = 0x00000000
2014.05.23 07:35:13 [email protected]: Synch operation completed
2014.05.23 07:35:13 Sending done, Error code = 0x00000000
2014.05.23 07:35:13 Sending done, Error code = 0x8004010f
2014.05.23 07:35:13 MAPI Status: (IN -- ---/OUT -- ---)
2014.05.23 07:35:13 Finishing the Spooling Cycle, Error code = 0x00000000
2014.05.23 07:37:53 [email protected]: Synch operation started (flags = 00000001)
2014.05.23 07:37:53 [email protected]: UploadItems: 1 messages to send
2014.05.23 07:37:53 EXECUTING Put MAPI TASK
2014.05.23 07:37:53 Starting the Spooling Cycle
2014.05.23 07:37:53 MAPI Status: (IN -- ---/OUT fl ---)
2014.05.23 07:37:53 MAPI XP Call: FlushQueues, hr = 0x00000000, ulFlushFlags = 0x0000001a
2014.05.23 07:37:53 Sending one message
2014.05.23 07:37:53 Progress: Sending message 'RE: Good Morning!' (size 14.03 KBytes)
2014.05.23 07:37:53 MAPI Status: (IN -- ---/OUT fl act)
2014.05.23 07:37:53 MAPI Status: (IN -- ---/OUT fl ---)
2014.05.23 07:37:53 MAPI XP Call: SubmitMessage, hr = 0x00000000
2014.05.23 07:37:53 MAPI XP Call: EndMessage, hr = 0x00000000
2014.05.23 07:37:53 FINISHED MAPI TASK
2014.05.23 07:37:53 [email protected]: ReportStatus: RSF_COMPLETED, hr = 0x00000000
2014.05.23 07:37:53 [email protected]: Synch operation completed
2014.05.23 07:37:53 Sending done, Error code = 0x00000000
2014.05.23 07:37:53 Sending done, Error code = 0x8004010f
2014.05.23 07:37:53 MAPI Status: (IN -- ---/OUT -- ---)
2014.05.23 07:37:53 Finishing the Spooling Cycle, Error code = 0x00000000
2014.05.23 07:57:34 [email protected]: Synch operation started (flags = 00000001)
2014.05.23 07:57:34 [email protected]: UploadItems: 1 messages to send
2014.05.23 07:57:34 EXECUTING Put MAPI TASK
2014.05.23 07:57:34 Starting the Spooling Cycle
2014.05.23 07:57:34 MAPI Status: (IN -- ---/OUT fl ---)
2014.05.23 07:57:34 MAPI XP Call: FlushQueues, hr = 0x00000000, ulFlushFlags = 0x0000001a
2014.05.23 07:57:34 Sending one message
2014.05.23 07:57:34 Progress: Sending message 'TP - Hold PE Call ' (size 6.00 KBytes)
2014.05.23 07:57:34 MAPI Status: (IN -- ---/OUT fl act)
2014.05.23 07:57:34 MAPI Status: (IN -- ---/OUT fl ---)
2014.05.23 07:57:34 MAPI XP Call: SubmitMessage, hr = 0x00000000
2014.05.23 07:57:34 MAPI XP Call: EndMessage, hr = 0x00000000
2014.05.23 07:57:34 FINISHED MAPI TASK
2014.05.23 07:57:34 [email protected]: ReportStatus: RSF_COMPLETED, hr = 0x00000000
2014.05.23 07:57:34 [email protected]: Synch operation completed
2014.05.23 07:57:34 Sending done, Error code = 0x00000000
2014.05.23 07:57:34 Sending done, Error code = 0x8004010f
2014.05.23 07:57:34 MAPI Status: (IN -- ---/OUT -- ---)
2014.05.23 07:57:34 Finishing the Spooling Cycle, Error code = 0x00000000
2014.05.23 07:58:58 [email protected]: Synch operation started (flags = 00000001)
2014.05.23 07:58:58 [email protected]: UploadItems: 1 messages to send
2014.05.23 07:58:58 EXECUTING Put MAPI TASK
2014.05.23 07:58:58 Starting the Spooling Cycle
2014.05.23 07:58:58 MAPI Status: (IN -- ---/OUT fl ---)
2014.05.23 07:58:58 MAPI XP Call: FlushQueues, hr = 0x00000000, ulFlushFlags = 0x0000001a
2014.05.23 07:58:58 Sending one message
2014.05.23 07:58:58 Progress: Sending message 'TP - Hold PE Call' (size 6.00 KBytes)
2014.05.23 07:58:58 MAPI Status: (IN -- ---/OUT fl act)
2014.05.23 07:58:58 MAPI Status: (IN -- ---/OUT fl ---)
2014.05.23 07:58:58 MAPI XP Call: SubmitMessage, hr = 0x00000000
2014.05.23 07:58:58 MAPI XP Call: EndMessage, hr = 0x00000000
2014.05.23 07:58:58 FINISHED MAPI TASK
2014.05.23 07:58:58 [email protected]: ReportStatus: RSF_COMPLETED, hr = 0x00000000
2014.05.23 07:58:58 [email protected]: Synch operation completed
2014.05.23 07:58:58 Sending done, Error code = 0x00000000
2014.05.23 07:58:58 Sending done, Error code = 0x8004010f
2014.05.23 07:58:58 MAPI Status: (IN -- ---/OUT -- ---)
2014.05.23 07:58:58 Finishing the Spooling Cycle, Error code = 0x00000000
2014.05.23 08:03:12 [email protected]: Synch operation started (flags = 00000001)
2014.05.23 08:03:12 [email protected]: UploadItems: 1 messages to send
2014.05.23 08:03:12 EXECUTING Put MAPI TASK
2014.05.23 08:03:12 Starting the Spooling Cycle
2014.05.23 08:03:12 MAPI Status: (IN -- ---/OUT fl ---)
2014.05.23 08:03:12 MAPI XP Call: FlushQueues, hr = 0x00000000, ulFlushFlags = 0x0000001a
2014.05.23 08:03:12 Sending one message
2014.05.23 08:03:12 Progress: Sending message 'Accepted: TP - Hold PE Call' (size 5.70 KBytes)
2014.05.23 08:03:12 MAPI Status: (IN -- ---/OUT fl act)
2014.05.23 08:03:12 MAPI Status: (IN -- ---/OUT fl ---)
2014.05.23 08:03:12 MAPI XP Call: SubmitMessage, hr = 0x00000000
2014.05.23 08:03:12 MAPI XP Call: EndMessage, hr = 0x00000000
2014.05.23 08:03:12 FINISHED MAPI TASK
2014.05.23 08:03:12 [email protected]: ReportStatus: RSF_COMPLETED, hr = 0x00000000
2014.05.23 08:03:12 [email protected]: Synch operation completed
2014.05.23 08:03:12 Sending done, Error code = 0x00000000
2014.05.23 08:03:12 Sending done, Error code = 0x8004010f
2014.05.23 08:03:12 MAPI Status: (IN -- ---/OUT -- ---)
2014.05.23 08:03:12 Finishing the Spooling Cycle, Error code = 0x00000000
2014.05.23 08:03:16 [email protected]: Synch operation started (flags = 00000001)
2014.05.23 08:03:16 [email protected]: UploadItems: 1 messages to send
2014.05.23 08:03:16 EXECUTING Put MAPI TASK
2014.05.23 08:03:17 Starting the Spooling Cycle
2014.05.23 08:03:17 MAPI Status: (IN -- ---/OUT fl ---)
2014.05.23 08:03:17 MAPI XP Call: FlushQueues, hr = 0x00000000, ulFlushFlags = 0x0000001a
2014.05.23 08:03:17 Sending one message
2014.05.23 08:03:17 Progress: Sending message 'Accepted: TP - Hold PE Call ' (size 5.70 KBytes)
2014.05.23 08:03:17 MAPI Status: (IN -- ---/OUT fl act)
2014.05.23 08:03:17 MAPI Status: (IN -- ---/OUT fl ---)
2014.05.23 08:03:17 MAPI XP Call: SubmitMessage, hr = 0x00000000
2014.05.23 08:03:17 MAPI XP Call: EndMessage, hr = 0x00000000
2014.05.23 08:03:17 FINISHED MAPI TASK
2014.05.23 08:03:17 [email protected]: ReportStatus: RSF_COMPLETED, hr = 0x00000000
2014.05.23 08:03:17 [email protected]: Synch operation completed
2014.05.23 08:03:17 Sending done, Error code = 0x00000000
2014.05.23 08:03:17 Sending done, Error code = 0x8004010f
2014.05.23 08:03:17 MAPI Status: (IN -- ---/OUT -- ---)
2014.05.23 08:03:17 Finishing the Spooling Cycle, Error code = 0x00000000
2014.05.23 08:04:08 [email protected]: Synch operation started (flags = 00000031)
2014.05.23 08:04:08 [email protected]: StartImport(flags = 00000000, max msg = ffffffff): full items
2014.05.23 08:04:08 [email protected]: UploadItems: 0 messages to send
2014.05.23 08:04:08 [email protected]: Synch operation started (flags = 00000031)
2014.05.23 08:04:08 [email protected]: StartImport(flags = 00000000, max msg = ffffffff): full items
2014.05.23 08:04:08 [email protected]: UploadItems: 0 messages to send
2014.05.23 08:04:08 Starting the Spooling Cycle
2014.05.23 08:04:08 MAPI Status: (IN fl ---/OUT -- ---)
2014.05.23 08:04:08 MAPI XP Call: FlushQueues, hr = 0x00000000, ulFlushFlags = 0x0000001c
2014.05.23 08:04:08 MAPI XP Call: Poll, hr = 0x00000000, cPollCount = 636
2014.05.23 08:04:08 Progress: Receiving message (message 1 out of 637, size unknown)
2014.05.23 08:04:08 Downloading one message
2014.05.23 08:04:08 Transport tightly coupled with store, download is NOOP
2014.05.23 08:04:08 Downloading done, Error code = 0x8004010f
2014.05.23 08:04:08 MAPI Status: (IN -- ---/OUT -- ---)
2014.05.23 08:04:08 FINISHED MAPI TASK
2014.05.23 08:04:08 [email protected]: ReportStatus: RSF_COMPLETED, hr = 0x00000000
2014.05.23 08:04:08 Finishing the Spooling Cycle, Error code = 0x00000000
2014.05.23 08:04:08 Starting the Spooling Cycle
2014.05.23 08:04:08 MAPI Status: (IN fl ---/OUT -- ---)
2014.05.23 08:04:08 MAPI XP Call: FlushQueues, hr = 0x00000000, ulFlushFlags = 0x0000001c
2014.05.23 08:04:08 MAPI XP Call: Poll, hr = 0x00000000, cPollCount = 706
2014.05.23 08:04:08 Progress: Receiving message (message 1 out of 707, size unknown)
2014.05.23 08:04:08 Downloading one message
2014.05.23 08:04:08 Transport tightly coupled with store, download is NOOP
2014.05.23 08:04:08 Downloading done, Error code = 0x8004010f
2014.05.23 08:04:08 MAPI Status: (IN -- ---/OUT -- ---)
2014.05.23 08:04:08 FINISHED MAPI TASK
2014.05.23 08:04:08 [email protected]: ReportStatus: RSF_COMPLETED, hr = 0x00000000
2014.05.23 08:04:08 Finishing the Spooling Cycle, Error code = 0x00000000
2014.05.23 08:04:08 EXECUTING EndSession MAPI TASK
2014.05.23 08:04:09 Starting the Simplified Transfer Cycle
2014.05.23 08:04:09 MAPI XP Call: Poll, hr = 0x00000000, iMsgsReceived = 0, cPollCount = 636
2014.05.23 08:04:09 Progress: Receiving message (message 1 out of 637, size unknown)
2014.05.23 08:04:09 Downloading one message
2014.05.23 08:04:09 MAPI Status: (IN -- act/OUT -- ---)
2014.05.23 08:04:09 MAPI Status: (IN -- ---/OUT -- ---)
2014.05.23 08:04:09 Downloading done, Error code = 0x8004010f
2014.05.23 08:04:09 Finishing the Spooling Cycle, Error code = 0x00000000
2014.05.23 08:04:09 FINISHED MAPI TASK
2014.05.23 08:04:09 [email protected]: ReportStatus: RSF_COMPLETED, hr = 0x00000000
2014.05.23 08:04:09 [email protected]: Synch operation completed
2014.05.23 08:04:09 EXECUTING EndSession MAPI TASK
2014.05.23 08:04:09 Starting the Simplified Transfer Cycle
2014.05.23 08:04:09 MAPI XP Call: Poll, hr = 0x00000000, iMsgsReceived = 0, cPollCount = 706
2014.05.23 08:04:09 Progress: Receiving message (message 1 out of 707, size unknown)
2014.05.23 08:04:09 Downloading one message
2014.05.23 08:04:09 MAPI Status: (IN -- act/OUT -- ---)
2014.05.23 08:04:09 MAPI Status: (IN -- ---/OUT -- ---)
2014.05.23 08:04:09 Downloading done, Error code = 0x8004010f
2014.05.23 08:04:09 Finishing the Spooling Cycle, Error code = 0x00000000
2014.05.23 08:04:09 FINISHED MAPI TASK
2014.05.23 08:04:09 [email protected]: ReportStatus: RSF_COMPLETED, hr = 0x00000000
2014.05.23 08:04:09 [email protected]: Synch operation completed
They are using a CRM client 2011 (Server is CRM 2011 - on premise) as well as having other connected email accounts - managed accounts, like Accounting or HR, etc.
What can I look for / provide for you all to assist? I am almost ready to open a ticket with Microsoft to resolve this as it has been happening for multiple users for multiple weeks.
When "I" go in, logged on as myself, I do NOT have this problem, however my account is not "old" in that I just logged onto the account domain\matthew.carter, where these users use their accounts day in and day out for weeks / months
/ (some years).
Thank you!

Did you post this in the SharePoint Section? Did you find a resolution for this?
We are experiencing the same issue and have yet to find anything to resolve this issue.
Regards, Daniel
I ended up scouring his old posts looking for the other thread, and he did open one in the SharePoint forum:
https://social.technet.microsoft.com/Forums/office/en-US/3dded85b-73ee-47dc-9609-6ee65f329983/outlook-the-path-specified-for-the-file-sharepoint-lists-pst-is-not-valid?forum=sharepointadminprevious#3dded85b-73ee-47dc-9609-6ee65f329983
Unfortunately, what was marked as an "answer" by the moderators isn't really an answer at all to the problem. We are experiencing pretty much an identical issue with a calendar people are adding to Outlook 2010 from SharePoint 2010 within a XenApp
server (using roaming profiles). However, we have not had the issue occur outside of XenApp yet.

Where did my file paths go?

I have Premiere Pro CS6 Cloud and am using a Mac. It works great for a while and then if I leave it for a while, it loses file paths to some of my clips and sometimes all of them. Sometimes this happens while I am working, but it always happens if I work on another app, or if the computer hibernates. Any thoughts on how to remedy this? It is really quite annoying, since I have to shut the app and re-open it, then it is all good again.

Just for testing a slightly larger project I loaded about two hours of raw footage into a Premiere CS6 project and proceded to organize the footage into scenes (bin folders) and then cut the scenes together. So far I'm not loosing any footage, nothing is going offline. But I want to cont testing it as this setup is going on location as I've mentioned.
A few thoughts. I have the latest Lion OS (which seems a little buggy to me) on this machine and I have gotten quite a few update notifications from Adobe, Premiere is at 6.01 and I found this list of fixes that were in that update. One stating "Some audio files and some MXF files would go offline or have their audio reconformed when the project was re-opened or when Premiere Pro was minimized or lost focus." Not sure what "lost focus" means. I just skimmed the list so there may be more related info.
Here's the full list of bug fixes in 6.01:
http://blogs.adobe.com/premiereprotraining/2012/05/premiere-pro-cs6-6-0-1-update-bug-fixes -and-improved-opencl-performance.html
The only big issue I'm having, that I also had in CS5.5, is that Premiere seems to not be releasing ram. I'll have a timeline that plays fine with JKL, but then suddenly things become very jerky. If I close Premiere and reopen it's all back to normal. This is with no other programs open and all ports closed.
Mobile system for test: MacBook Pro, 16 gig ram, 2.4 GHz quad core i7, OWC dual mini raid 0 connected via Sonnet eSATA express34 card.

"File file path:to:file is already open" how do i close it?

I am trying to write a script that pops up a dialog box, asks for text and saves this to a .csv and a .txt This is so i can quickly record what i am doing and the times i am doing it, makes quick notes and various things like that. However it is failing with the message "File file path:to:file is already open" so how do i close the file or get around this. Cheers
Script Below
tell me to activate
display dialog "Enter the log message:" default answer "" buttons {"Cancel", "Ok"} default button "Ok"
copy the result as list to {the log_message, the button_pressed}
if the button_pressed is not "Cancel" then
set curTime to (do shell script "date \"+%H:%M:%S\"")
set curDate to (do shell script "date \"+%Y%m%d\"")
set new_foldername to curDate
set this_folder to (path to current user folder) as text
set fPath2 to this_folder & "Documents:Logs:Date:" as alias
--set this_folder to "Macintosh HD:Users:username:" as alias
tell application "Finder"
if not (exists folder new_foldername of fPath2) then
make new folder at fPath2 with properties {name:new_foldername}
end if
end tell
set fPath to (path to current user folder as Unicode text) & "Documents:Logs:Date:" & curDate & ":"
set fName to curDate & ".csv"
set myFile to open for access file ((fPath as string) & fName) with write permission
write curTime & "," & log_message & return to myFile starting at eof
close access myFile
set fName2 to curDate & ".txt"
set myFile to open for access file ((fPath as string) & fName2) with write permission
write curTime & " " & log_message & return to myFile starting at eof
close access myFile
end if

Hi Richard,
Run this in the script editor:
set f to choose file
close access f
Navigate to the file you left open. Probably there was an error and the file was left open because it never reached the 'close access' command.
gl,

Issue with length of file paths - Windows & C++ plugin

Hello,
I've got an issue that just popped up on my OCR plugin I've been working on that I suspect is related to the length of the filepath.
I'm getting the following error that is being caught and logged when trying to open a file (filename changed for security purposes):
Error Opening File: D:\aVeryLongFilePath.pdf
Exception info: This file cannot be found.
The entire string, including the D:\ part, is 266 characters long. I cut down the length of part of the path one by one and it was able to open and OCR the document when the length was 259 characters.
I know there's a MAX_PATH variable in Windows and/or there's some kind of limitation for file length. Note that I can open the file in Acrobat using File->Open and run OCR on it individually using the built-in Recognize Text function, but if I try to Recognize Text for Multiple files and choose "Add Folders", the file in question doesn't show up in the list of files to be batch OCR'd (even though it is there). Interestingly, choosing "Add Files" from the Recognize Text->In Multiple Files does work. So Acrobat itself has at least some issues opening the file using some of it's features.
Here's how I'm opening the document:
 string pn; // assume this is initialized, I'm just putting this here to demonstrate what type it is
 pathName = pn;
 ASAtom pathType = ASAtomFromString("Cstring");
 asPathName = ASFileSysCreatePathName(ASGetDefaultFileSys(), pathType, pn.c_str(), NULL);
 pdDoc = PDDocOpen(asPathName, ASGetDefaultFileSys(), NULL, true);
Is there a way around this problem?
Thanks.

Yes, you are hitting the MAX_PATH on certain versions of Windows. The only workaround would be to see that the file is "a very long path" and then break up the pathname construction into multiple pieces (perhaps the containing directory and then the file itself). The other option is don't use Cstring to construct, use the Unicode variant.
From: Adobe Forums <[email protected]<mailto:[email protected]>>
Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date: Mon, 7 Nov 2011 15:43:33 -0800
To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
Subject: Issue with length of file paths - Windows & C++ plugin
Issue with length of file paths - Windows & C++ plugin
created by zephed56<http://forums.adobe.com/people/zephed56> in Acrobat SDK - View the full discussion<http://forums.adobe.com/message/4012710#4012710

External hard drive -- old file path from a previous laptop is still where to find my songs, how do I change?

My iTunes library is a mess, it is stored on an external hard drive. My old laptop died unexpectedly and I didn't have a problem resetting the file path for the library on my new laptop. The other day my son was trying to update his iPod when I wasn't home and I don't know what he did.... GRRRR Any songs I purchased on my old laptop are now not able to be found. When I click on 'get info' on a song it shows the old file path from the old laptop. Songs that I purchased since the new laptop are still playable and great. I know my songs are still there but I can't seem to get the file path to reset on the old music. HELP!!! PLEASE

This happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or an external drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
tt2

File browse : How to keep the file path in the file browse field?

Hello,
I have
1) file browse field called P2_FILE_PATH.
2) a select list with submit : P2_REGION
If i upload some file d:\abc.gif , then select some region in the P2_REGION,
P2_FILE_PATH will become empty. But in the session, i can find the blob value. but not the "d:\abc.gif "
Using the following script I could capture the value of P2_FILE_PATH in a field
P2_TEST.
onload="javascript:document.getElementById(P2_FILE_PATH').value = document.getElementById('P2_TEST').value;"
P2_TEST contains d:\abc.gif .
How to retain the file path, though some other field is selected and submitted?
Thanks in advance.
Regards,
Archana

Hello Archana,
You can't do what you want because of some HTML security restrictions – nothing to do with APEX. As you found out, You can capture the value of this item. You can't set it. After submitting the page, the browser is the one to clear the item.
The only workaround is to work with AJAX and not submit the page until the end of the user input phase.
Regards,
Arie.

Difference between logical file path and physical file path

Hi,
Can anyone tell me why logical file path is required and why physical file path is required? What exactly is the difference bet them?
Thanks in advance.
Regards,
PS.

Hi,
The function module FILE_GET_NAME convert a logical path into its corresponding physical path.
The advantage of using logical pathes within your applications is obivous:
If you need to change the physical path you just adjust it within transaction FILE yet no changes are required to your application.
http://help.sap.com/saphelp_erp2005vp/helpdata/en/25/ab3a57df3b11d189fc0000e829fbbd/frameset.htm
The file names that you use in ABAP statements for processing files are physical names. This means that they must be syntactically correct filenames for the operating system under which your R/3 System is running. Once you have created a file from an ABAP program with a particular name and path, you can find the same file using the same name and path at operating system level.
Since the naming conventions for files and paths differ from operating system to operating system, ABAP programs are only portable from one operating system to another if you use the tools described below.
To make programs portable, the R/3 System has a concept of logical filenames and paths. These are linked to physical files and paths. The links are created in special tables, which you can maintain according to your own requirements. In an ABAP program, you can then use the function module FILE_GET_NAME to generate a physical filename from a logical one.
Maintaining platform-independent filenames is part of Customizing. For a full description, choose Tools ® Business Engineer ® Customizing, followed by
Implement. projects ® SAP Reference IMG. On the next screen, choose Basis Components System Administration ® Platform-independent File Names.
For a more detailed description of the function module FILE_GET_NAME, enter its name on the initial screen of the Function Builder and choose Goto Documentation. On the next screen, choose Function module doc.
Another way of maintaining platform-independent filenames is to use the Transaction FILE. The following sections provide an overview of the transaction.
To create a logical filename, choose Logical filename definition, client-independent from the Navigation group box in Transaction FILE, then choose New entries. You define logical filenames
You can either define a logical filename and link it to a logical path (as displayed here), or you can enter the full physical filename in the Physical file field. In the latter case, the logical filename is only valid for one operating system. The rules for entering the complete physical filename are the same as for the definition of the physical path for the logical file. To display further information and a list of reserved words, choose Help.
If you link a logical path to a logical file, the logical file is valid for all syntax groups that have been maintained for that logical path. The filename specified under Physical file replaces the reserved word in the physical paths that are assigned to the logical path. To make the name independent of the operating system, use names that begin with a letter, contain up to 8 letters, and do not contain special characters.
Save your changes.
regards,
Omkar.

Diff between logical and physical file path

Hi ,
Could you please explain difference between logical and physical file path's and their importance in ABAP.
Thanks and regards,
shyla

Hi
The function module FILE_GET_NAME convert a logical path into its corresponding physical path.
The advantage of using logical pathes within your applications is obivous:
If you need to change the physical path you just adjust it within transaction FILE yet no changes are required to your application.
http://help.sap.com/saphelp_erp2005vp/helpdata/en/25/ab3a57df3b11d189fc0000e829fbbd/frameset.htm
The file names that you use in ABAP statements for processing files are physical names. This means that they must be syntactically correct filenames for the operating system under which your R/3 System is running. Once you have created a file from an ABAP program with a particular name and path, you can find the same file using the same name and path at operating system level.
Since the naming conventions for files and paths differ from operating system to operating system, ABAP programs are only portable from one operating system to another if you use the tools described below.
To make programs portable, the R/3 System has a concept of logical filenames and paths. These are linked to physical files and paths. The links are created in special tables, which you can maintain according to your own requirements. In an ABAP program, you can then use the function module FILE_GET_NAME to generate a physical filename from a logical one.
Maintaining platform-independent filenames is part of Customizing. For a full description, choose Tools ® Business Engineer ® Customizing, followed by
Implement. projects ® SAP Reference IMG. On the next screen, choose Basis Components System Administration ® Platform-independent File Names.
For a more detailed description of the function module FILE_GET_NAME, enter its name on the initial screen of the Function Builder and choose Goto Documentation. On the next screen, choose Function module doc.
Another way of maintaining platform-independent filenames is to use the Transaction FILE. The following sections provide an overview of the transaction.
To create a logical filename, choose Logical filename definition, client-independent from the Navigation group box in Transaction FILE, then choose New entries. You define logical filenames
You can either define a logical filename and link it to a logical path (as displayed here), or you can enter the full physical filename in the Physical file field. In the latter case, the logical filename is only valid for one operating system. The rules for entering the complete physical filename are the same as for the definition of the physical path for the logical file. To display further information and a list of reserved words, choose Help.
If you link a logical path to a logical file, the logical file is valid for all syntax groups that have been maintained for that logical path. The filename specified under Physical file replaces the reserved word in the physical paths that are assigned to the logical path. To make the name independent of the operating system, use names that begin with a letter, contain up to 8 letters, and do not contain special characters.
Save your changes.

Win vs. Mac File Paths

I have a script that Peter Kahrel helped me with (actually he pretty much wrote the whole thing). The script saves out each page of an Indesign doc as jpeg. It also takes the text from a text box tagged "jobnumber" and inserts it into the name of the saved jpeg.
It works great on the Mac. When I move it over to Windows it inserts a weird character before and after the "jobnumber".
On the Mac I can take the folder name which is a variable called 'path' and insert that into the filename as well but it doesn't work on Windows. Does anyone know what the differences are between Mac and Win paths in JS? I tried a few things to no avail.
Here's the script:
==========================================
var path = Folder.selectDialog ("Choose a Folder")
app.jpegExportPreferences.resolution = 72;
app.jpegExportPreferences.jpegExportRange = ExportRangeOrAllPages.exportRange;
app.activeDocument.sections.everyItem().includeSectionPrefix = false;
//path = app.activeDocument.filePath + '/';
p = app.activeDocument.pages.everyItem().getElements();
for (i = 0; i < p.length; i++)
jpg_name = p[i].textFrames.item ('jobnumber').contents + '.jpg';
app.jpegExportPreferences.pageString = p[i].name;
app.activeDocument.exportFile (ExportFormat.jpg, File (path + "/" + jpg_name));
===========================================
As always, Thanks a million,
Randy

I forgot, here's a screenshot:
http://reallyrandy.com/misc/screenshot2.jpg

Validation and F4 help on an application server file path parameter

Hi
I have a field on a selection screen called File Path and it is for a download program where the user needs to specify the path for the download (NOT THE ACTUAL FILENAME).
I am trying to find a function or method that allows a user to use F4 help to browse for a directory rather than a specific file. There are lots of posts out there asking this question but all of the answers point to functions that allow you to browse for a particular file rather than just the file path/directory.
Does anyone know of a function that provides F4 help to browse for a file path on the Server (NOT PC). I would want the user to just be able to select the directory or path and have the path returned. They should not need to pick a specific file.
F4_DXFILENAME_TOPRECURSION is a very good function but unfortunately it makes the user pick a file rather than just a directory.
In addition to this, does anyone know of a function or method that allows you to then validate the path\directory that is entered?
Thanks for your help
Nicole

Hi,
You can try with the FM 'EPS_GET_DIRECTORY_LISTING'. With this Fm module you will get you the list of files of a particular path in an internal table. Then you can populate this internal table in F4 help.
Hope this solves your problem. If any difficulty, come back to me about that.
Below are some other FM related to application server directory. Hope these Helps.
EPS_GET_DIRECTORY_LISTING
EPS_GET_DIRECTORY_PATH
EPS_GET_FILE_ATTRIBUTES
EPS_GET_FTP_SYSTEM_INFO
Regards,
Shailesh Jadhav

Regarding Application server file path browsing

Hi All,
I have a issue regarding Application Server File Path browsing.
Actually in my selection-screen i will declare a parameter as Application Server File Path now when i press F4 in that field it should be able to browse through Application Server Path's.
Just like F4_FILENAME in the case of Presentation Server File Path Browsing.
Can anybody solve my issue.
Thanks in advance.
Thanks & Regards,
Rayeez.

Hi Shaik,
Just copy and paste:
Here is the code for retrieving list of files contained within specific Application server directory(SAP).
PARAMETER: p_fdir type pfeflnamel DEFAULT '/usr/sap/tmp'.
data: begin of it_filedir occurs 10.
include structure salfldir.
data: end of it_filedir.
START-OF-SELECTION.
Get Current Directory Listing for OUT Dir
call function 'RZL_READ_DIR_LOCAL'
exporting
name = p_fdir
tables
file_tbl = it_filedir.
List of files are contained within table it_filedir
loop at it_filedir.
write: / it_filedir-NAME.
endloop.
Hope this will help you.
Let me know incase of any concerns.
EDIT:
There are few FM for ur refernce :
RZL_READ_DIR_LOCAL
SUBST_GET_FILE_LIST Return table with file list for the given directory (pattern allowed)
F4_DXFILENAME_TOPRECURSION Popup to select one file from the given application server directory
TH_SERVER_LIST Returns list of application servers.
EPS_GET_DIRECTORY_LISTING Lists filenames from the application server .
Cheers
Sunny
Rewrd points, if found helpful
Message was edited by: Sunny

File path to metadata

Hi,
Anyone knows if it´s possible to set the file path of an image to it's metadata keyword field using a script in Bridge?
Thank you!

maybe with a script, to pickup the path "photos/landscapes/summer/beach/shore.jpg" and put it in the keywords like this "photos;landscapes;summer;beach;shore.jpg"
There is a dedicated Bridge Scripting forum that might have an answer on this:
https://forums.adobe.com/community/bridge/bridge_scripting
But to be honest, you could do a lot of this yourself in a relatively easy way.
You have to know that you can add keywords to multiple files at once just by selecting them.
However, your first goal should be to create your own keyword tree. This is a bit of work and needs good planning but is needed for future use and comfort. You can also use parent and child (keywords and sub keywords) and in Bridge prefs select to auto apply parent keywords for more ease of use (see further on).
You can create your list in Bridge keyword panel by using right mouse click menu and choose keyword or sub keyword. Or use a simple text application, you need to start a new line at the beginning for each main keyword, the next line (use enter) with 1 tab creates a sub keywords, again enter with 2 tabs a sub-sub keyword.
In your case it would mean to create the main keyword landscape, inhere the sub keyword summer, on this again a sub keyword beach, again shore and you are done for this folder.
Now all you have to do is to select the folder shore and select all files, click on the last sub keyword shore to select it and with the correct preferences setting per above all parent keywords beach, summer and landscape are auto selected. You only have to wait for the task to be finished completely (the metadata has to be saved to the files) before starting the next task.
There is no need for jpg as keyword and also not for photo's because all images are photo's and mostly jpeg. otherwise the result of the search could be easily filtered for correct file type.
You can create as many keywords as you like and also many sub keywords. For instance under landscape you can create a new sub keyword for all seasons, just hold the cursor above the parent word and choose new sub keyword. This can also done for beach, you can make it as large as you wish or want.
Be sure to back up your keyword list regularly (use the tiny menu icon top right in keyword panel and chose export) save it with a proper name and open it in a text application to view how it looks when you have several sub keywords.
The benefit of creating first a keyword list is that you can easily select new images with existing keywords instead of creating them again and again.
And it looks far more difficult then it is in reality, just try it and give it a go.
When done you can use the Search command and choose a main folder, include subfolders and non indexed files and for criteria use keyword and fill in the keyword you want to search for. Having written all keywords to the files other applications can search for them also.

Reconnecting clips weirdness no file path listed

Similar Messages

Maybe you are looking for