Reconnecting to Custom Motion Templates between Two Editing Systems

I'm having an issue with "media offline" in my FCP timeline whenever customized Motion templates are used in projects that are often edited between two different systems.
I always start with a standard "motion" project file and save it in my current project folder as a "Master" for creating identical templates on both systems. Yet even though both systems have the same custom template directory and the same template names, the FCP timeline always reports "Media Offline" whenever I try to work remotely on a project.
I'm wondering if it might somehow be possible to correct this issue so that my lower third overlay templates can exist on two different systems?
Thanks!

Sorry, I kind of thought my choice of words might be misunderstood. What I meant was that I always keep the original motion file that I initially created the template from in my current project folder. I am then able to open that original motion project file on the remote system and "save as template", so that (theoretically) I would end up with two identical templates (one on each system) located in the "user>library>application support>final cut studio>motion>template" directory.
I think I must have a tiny little error (or type-o) in the naming of either my template of the custom template folder. I'll have to go in and double check now that I have the correct path. (I was having a really hard time locating the "actual files" of my custom templates.
Thanks very much for your help!

Similar Messages

  • RFC connection between two SAP systems (with SAP router)

    Hi!
    I would like to set up a RFC-connection from SAP Solution Manager to other SAP system.
    The network connection between the servers is VPN.
    How can I set up this RFC-connection, if my connection between two SAP systems looks as follows,
    (I use the following SAP routers)?
    my server  --> customer
    my server --> internal SAP Router server xy (10.101....) --> SAP Router customer 2 (10.1....) --> SAP System customer (134....)
    Back-way
    SAP Systeme customer --> SAP Router customer (134.1....) --> internal SAP router (212.6....) --> my server
    How can I set up this RFC-connection, if my connection between two SAP systems looks as follows,
    (I use the following SAP routers)?
    something like:
    /H/10.101..../S/sapdp99/H/10.1.4..../S/sapdp99/H/134...
    Thank you very much!
    regards
    Thom

    Same answer as in the other forum where you cross posted....

  • SMTP Namespace Sharing between two mail system

    I have used two mail server (Exchange 2013 and Linux sendmail) for mailing in the same domain like abc.com.
    I have converted authoritative domain in to internal relay for sending mail in Linux mail user, and create a send connector point to Linux mail system as a smart host. in that case my exchange user send mail to Linux user and internet via Linux smart host,
    then I create a receive connector in exchange server for receiving mail from Linux mail system as edge transport custom connector & permission set to anonymous, when Linux user send mail to my exchange user it queued in my exchange message queue and
    the error is:
    Last Error:A local loop was detected.
    What's the problem?

    Hi rana78,
    As Nathan mentioned, please create Contacts.
    Detailed information:
    So to avoid NDRs when using shared SMTP namespace you will need to either disable recipient filtering, configure the product to do LDAP queries against all directories that share the namespace, or create Contacts.
    More details to see:
    How to Share an Email Domain Between Two Mail Systems
    http://exchangeserverpro.com/how-to-share-an-email-domain-between-two-mail-systems/
    Disclaimer:
    Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make sure
    that you completely understand the risk before retrieving any suggestions from the above link.
    Thanks
    If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Mavis Huang
    TechNet Community Support

  • Intra-company stock transfer between two ERP Systems without SAP APO

    Hi,
    I'm looking for information regarding the scenario Intra-company stock transfer between two ERP Systems without SAP APO.
    On help.sap.com, I can only find below image, but I'm actually looking for the configuration settings required to implement it.
    Does anyone have experience with this scenario?
    Thanks & regards,
    Oliver

    Hi Jagdeep,
    Thanks for the reply. I understand that I need to use iDocs and setup communication between both systems. What I am actually looking for is detailed information on the setup of the purchase order type and sales order type. Especially because there is no invoicing involved in this flow.
    Regards,
    Oliver

  • IDOC -IDOC BETWEEN TWO  XI SYSTEM

    Hi iam Doing a scenario, 
    where i need to post an idoc from one system to another that travells through 2 xi system..
    The Scenario is like this:
    ISU --> XI1 > XI2>  isu2
    while doing this i used XI adapter between the Xi system.
    And i am getting an error as Loop in Message Control in the  MONI.
    Please Do the Need Full Its urgent....
    DId Any One Tried For this Type Of Scenario.. Please LET Me Know..
    ITS URGENT
    Thanks
    Praveen
    Edited by: pravin kk on Feb 20, 2008 6:38 PM
    Edited by: pravin kk on Feb 21, 2008 12:53 PM

    Hi,
    The communication via web service may have advantages, if you want communicate with non XI systems.
    In your scenario, there is direct communication between XI engines, so you can go for XI adapter. The XI adapter which is normally used to configure the exchange of messages with in an Integration Server, canbe extended to exchange messages between the two Integration Servers in the scenario.
    Please verify if if you have the common SLD for both XI systems. its preferable to go for seperate SLDs
    Check out the similar threads, XI to XI scenarios:
    Re: XI -> XI scenario
    Re: XI to XI connectivity
    connection XI to XI
    Re: XI to XI connectivity
    These links will definitely give you an idea about the current situation.
    Thanks
    Swarup

  • Client Copy between Two Different Systems

    Hi!!
    Could someone please explain or provide any documentation which explains how to perform client copy between two r/3 systems of same version(ecc 6.0)
    Thanks and Regards,
    Vishwa.

    Hi,
    Save the contents that need to be copied in a Transport request at source client.
    Now at the target client system,
    execute transaction 'SCC1' and give the TR number and execute it.
    The changes from the source client system this way will get copied to destination client system.
    Reward if useful!
    Thanks,
    KalpanaR

  • Mirror virtual machines between two nas systems

    Hello everyone,
    I have an esx3.5 server and the vm's are stored in a thecus n5200pro nas using iSCSI. the synchronization module installed in the nas doesn't support iSCSI so I'm trying to find a solution to my problem.
    Basically what I need is to mirror the first nas on the second so if the first one fails, I can just change the backup nas ip address and get things working again.
    The only solution I found so far (which I'm currently testing) is using win2k3. I installed the ms iscsi initiator and created a mirror between the volumes of the two nas systems. It's currently synchronizing so I don't know if this will work yet.
    My question is if there is a better way to handle this job without having to buy additional software. if not, is my current setup going to work?
    guido

    Hi Pranay,
    >>There is a storage server which is added on both the host under as ISCSI array option :-
    Do you mean the two hosts are connecting same ISCSI target of the storage server ?
    Based on my understanding , shared storage is used for cluster .
    Could you please tell us where the VMs is stored ?
    Best Regards,
    Elton Ji
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

  • Replication issue between two APO systems

    Hi,
    I have two APO systems. I am trying to replicate the Forecast data from one system to the other. In the first system, I created the Export data source of the Forecast infocube. In the second system, I created a data target and used the extracted datasource from the first system as the info source. Now the issue is that the data is getting updated in the second system except for the one plant where the data is erroring out. When I look at the error, the data seems to have been offset by a character to the left. The error is happening to only this one particular plant. I checked up the plant information in both the systems and it looks alright. Any ideas why only one plant is affected?
    Best Regards,
    Jai

    Please ignore this issue. I found out the data was bad. Unable to delete this question.
    -jai

  • Can't properly create motion tweens between two keyframes in flash CS4

    I'm trying to create a flash animation of a wing flapping using three keyframes. The first keyframe is at frame 1. I then created a second keyframe at frame 5 by pressing F6, and then I created another keyframe at frame 10 by pressing F6. At frame 5, I rotated the wing so that it is going up. Frame 10 is the same as frame 1.
    frame 1:
    frame 5: frame 10:
    I right clicked on a frame between frames 5 and 10 and then clicked the first option, "Create Motion Tween"; I then performed the same action on a frame between frames 1 and 5. When I preview or test the movie, there is no transition between the frames. From frame 1 to 5, there is supposed to be a transition of the wing flapping up. From frame 5 to 10, there is supposed to be a transition of the wing flapping downwards to its initial position. Instead, when I test the movie, the wing remains still until frame 5 and instantly goes to its "wing up state" and when it gets to frame 10, instantly goes to its "wing down state".
    Here is what the timeline looks like after I've made the changes mentioned above:
    I'm using Flash CS4 to make the animation but the tutorial I'm following is using Flash CS3. I know I can use other methods to create the motion tween but I want to know why the method I'm using isn't working.

    I did switch to classic tweening. I pressed F6 to make a keyframe at frames 5 and 10. I then right clicked on a frame between frames 1 and 5 and then clicked
    "create CLASSIC tween"; did the same thing between frames 5 and 10. I'm not seeing the transitional frames between frames 1 and 5 that the tutorial showed.

  • Two editors on two edit systems sharing the same footage, suggestions?

    So I just got done shooting my first feature and now I've got to come up with a plan for editing.
    Here's what I got:
    1 Core 2 Duo iMac with FW800 FCS2
    1 Core Duo iMac with FW400 FCS2
    ~40hrs of DV25 footage
    $800 dollars to spend on a storage solution
    The Core 2 Duo iMac will be the primary system for the final edits, color correction, ect. and the other iMac will be used for rough cuts, capturing a/v, exporting, etc.
    For the most part only one system will be editing at once, but I'd like both systems to have simultaneous access to the footage for the days when we need to hustle.
    Originally my plan was to get a 1TB G-RAID2 (or something similar) and run firewire to both systems but from what I've heard, that's a bad idea. Maybe I could link it to one computer and have one system edit over a network?
    I'm starting to think the only real solution is to give both systems their own drive, but it seems like a waste since we're using roughly 500GB of the same stuff. My "dual edting" idea is starting to seem like more of a pain than a benefit.
    Thanks in advance for any help, and please let me know if you have a better idea for our post production setup overall.

    With that much money, you only have two solutions.
    1) Get two drives...put the same footage on both, keeping the exact same file structure. Name both drives the same name so that when you swap projects you don't need to reconnect. Render files you will have to re-create...by rendering. Any new footage you capture onto one will have to be copied onto the other.
    2) Connect one drive to one iMac, connect both iMacs via Ethernet, then enable file sharing and include that drive. This, however, is very unreliable.
    Shared Storage solutions costs thousands to tens of thousands of dollars.
    Shane

  • Synergy between two Arch systems. Stops working randomly. [SOLVED]

    I have two PCs connected with a crossover ethernet cable. I use synergy to control them both (a laptop with two screens, a desktop with one screen).
    I use Arch on my laptop and connect the mouse and keyboard to it. I start Synergy on the laptop by starting the daemon (/etc/rc.d/synergys start). When I boot Windows on the desktop, Synergy works just fine. If I use QuickSynergy on the desktop with Arch, the connection will start to randomly cut out. Sometimes after only putting the mouse to the desktop screen once, sometimes after a few minutes of use.
    The only way to start it up again is to click Stop and Start on QuickSynergy. It won't usually last very long though before it cuts again.
    I figured that an update may have caused the problem, so I've been waiting to see if it would get fixed, but it hasn't so far.
    Any other ideas?
    Last edited by themusicalduck (2012-01-18 02:29:36)

    I only know of https://bugs.archlinux.org/task/26992 . Have you checked upstream? (a bit silly question because I wouldn't really know how to describe this issue)

  • DB Copy (MSSQL) between two SAP systems with different level and Components

    Hi,
    we have a SAP system release mysap 2004 SR1 and for "the upgrade project  to SAP ECC 6.0 " we installed a new mysap 2004 in a new hardware (sap03) where we have also solution manager running. The new installed Mysap 2004 SR1 is alos running fine in the new hardware.
    Now we would like to do DB copy from the old system (sap02) to the the new system sap03 and then we will do the upgrade to SAP ECC 6.0.
    After I compared the two systems I have following questions:
    1) there are 4 Software Components which are not in the new system (sap03). This are:
    PI
    FIN_BLERP
    BP_INSTRASS
    Is this necesary for the DB copy or we do not need this to be able to do the DB copy?
    2) The Software Components Level is not the same. Should we have the same level to do the DB Copy?
    Thanks in advance
    Best regards
    HanseAtik

    Hi Juan, hi Clas,
    just to be clear and to not stuck on the the way:
    The systems are as follow:
    1) the source system:
                         - Windows Server 2003,
                         - MSSQL Server 2005 with 32 bit.
                         - Mysap 2004 SR1
    2) Target system:
                       - Windows Server 2003
                       - MSSQL Server 2005, with 64 bit.
                       - Mysap 2004 SR1 (with less Support package level and no PI, FIN_Basis, BP_BLERP and BP_INTASS coponents)
    I hope this will work. could you post the link the DB Copy guide we are talking about?
    By this way we will be sure that we are talking about the same DB Copy. Otherwise any mistake in this step will cost more work and time.
    Thanks in advance
    Best regards
    HanseAtik

  • Help needed on movement of transports between two production systems

    Hi All,    
    Our client is implementing SAP in US and Europe and it has separate production systems for both. It already went live in US and now started SAP implementation for Europe. They wanted to leverage the development & configuration done for US in Europe implementation and have taken the copy of US development box and started building on that. For Europe, they identified few changes to the existing custom objects from US,  few objects from US which are not required and also brand new objects. Going forward, they also decided to import all the defect fixes and changes from US into Europe system on a regular basis(monthly).
          If anybody has experience in an environment like above, please let us know the pros and cons with the approach highlighted above.

    Differentiate thru trasports requests and move the correspoding cofiles and Data files in required system and import as suggested earlier.
    Thanks

  • Calling Web Services between two SAP systems.

    Hi Experts,
    I am trying to trigger a web service  created in one of the SAP system from a different R/3 system through WDA.
    Kindly help me out on what are the configurations to be done like linking two systems (do i require this?) etc..
    I have successfully obtained the WSDL file, but could not use it in my second system. It says , it encountered an error. I wonder if i am required to do any configurations.
    All suggestions are welcome.
    Thanks and Regards,
    Anto.

    Hi Antony,
    By Proxy Object, I meant Class to consume WebService in your second system.
    Lemme summarize, what you have done and lemme know where I am wrong.
    System A.
    You exposed an RFC enabled Func Module or BAPI as a webservice.
    After this you have checked it using WSADMIN, and you have tested this as well.
    And finally you saved the WSDL file of this Web Service.
    System B.
    you create a Proxy Object as specified in the link I provided.
    you create the RFC destination n did the Logical Port Configuration  as per that link.
    Now you can use this proxy class any where , in any abap code.
    you can use this in WDA as well.
    But before doing so, I would suggest to write a test report as suggested in the link and test if your webservice is working fine.
    Now please tell me where did you do the things differently.
    Regards
    Pushkar

  • Transfering data between two different systems through dedicated port

    Hi!
    We are developing our system in java. But we need to communicate an existing Tandem COBOL System through a dedicated port to get some information. The user has already developed an interface to listen the request and send the response. What sort of interface we need to develop for requesting and receiving data? Anyone here to help me?

    Network connections are well-supported in Java by the java.io, java.net and java.nio packages.
    Read the Java networking tutorial: http://java.sun.com/docs/books/tutorial/networking/

Maybe you are looking for