Reconnecting to the session after loosing connection

Hello Experts,
I've done some work within an transaction, not saved it and i've lost the network connection. I connected to SAP again, and as I see in sm04, my previous session is still there. Now I want to get this session back to continue the work. Very very long time ago, I known the possibility to do it, but now I cant remember. Please help me ... ;-).
Thanx
Wojtek

hi,
sm50 are processes. if in the lost session nothing happens what need a DIA-Process, nothing is shown. Beside this I dont see an option for 'take over'.
thanx
Wojtek

Similar Messages

I am using a bluetooth LG HBS700 headset. Since upgrading my Iphone 4 to IOS 6 I can't have the Iphone more than 1 foot away from the headset without loosing connectivity.

I am using a bluetooth LG HBS700 headset. Since upgrading my Iphone 4 to IOS 6 I can't have the Iphone more than 1 foot away from the headset without loosing connectivity.

You are a genius! Thank you so much; my LG HBS700 now works with my iPhone 5. It is so wonderful that there is this facility for people to help each other. And it is so agrivating that there are these mysterious, unexplained, magic tricks necessary to make my phone work. Do you happen to know how the button combination resolved the Bluetooth issue? What was the Bluetooth problem and how did this fix it. Again thank you for passing this on.

Database holds the session after disconnecting from DB !

Dear Friends ,
I am using Oracle10g database (10.2.0.4) as our production server in AIX 6.1 . Recently we purchase
an application which is used for a banking module . The application user name 'INCHEQS' .
Now the problem is , when we are connection through this user from the client end then ,
a lot of user has connected although the users are not connected . i.e., If a user disconnect
from his session but that session still connected in my database .
Plz see the output :
SQL> select count(*) from v$session where username='INCHEQS';
COUNT(*)
100
SQL> select username,status from v$session where username like 'INCHEQS% ;
USERNAME STATUS
INCHEQS INACTIVE
INCHEQS INACTIVE
INCHEQS INACTIVE
INCHEQS INACTIVE
INCHEQS INACTIVE
INCHEQS INACTIVE
100 rows selected.
In the above output of my production database , all the above users are not connected , but the
session keeps on the database . In this moment , How can I solve the issue . Is there any related
oracle parameter (Rather than RESOURCE_LIMT) to remove all the above INACTIVE users after a specified time .
Here I mention that , it is not possible to enable 'RESOURCE_LIMIT' parameter in my Database .Edited by: shipon_97 on Aug 26, 2010 2:04 PM

It does sound like a connection pooling issue. Does the application have a web server component? Do the number of sessions grow over time or do they hold steady at a certain value.
You should talk to the support area for the purchased app to see if there are steps to limit the number of sessions, if that is a problem.
Also, as a workaround you may be able to restart the web server on a regular basis to clear out those sessions. I would only do that if the session count continues to grow over time.

How to kill the session after the user exit the ADF application

Dear all
I have a problem
The problem is the session still exist after the user close the application and the browser. I want to kill all sessions that is not active.
This is my test scenario:
1- I open IE and run my ADF application that is deployed on weblogic. http://192.168.100.17:7001/myapp/faces/login
2- At the same time I issue this SQL command to view the sessions for user 'ADFUSER' - the "ADFUSER" is the schema user.
SELECT USERNAME,STATUS FROM v$session
WHERE USERNAME = 'ADFUSER';QUERY RESULT IS
USERNAME                       MODULE                                           STATUS
ADFUSER                         JDBC Thin Client                                 INACTIVE3- Now the user close the browser
4- Run the SQL again and I notice that the session still exist
SELECT USERNAME,STATUS FROM v$session
WHERE USERNAME = 'ADFUSER'RESULT:
USERNAME                       MODULE                                           STATUS
ADFUSER                        JDBC Thin Client                                 INACTIVE5- now the user open the URL again http://192.168.100.17:7001/myapp/faces/login
6-Run the SQL again , and I notice that the old session still exists and a new session created too.
SELECT USERNAME,STATUS FROM v$session
WHERE USERNAME = 'ADFUSER'RESULT:
USERNAME                       MODULE                                           STATUS
ADFUSER                        JDBC Thin Client                                 INACTIVE
ADFUSER                        JDBC Thin Client                                 INACTIVE
2 rows selected.and every time I login to the application , a new session is open and the old session still exist
I do not know why this happens
I want to kill old session when the user close the application.
These sessions are cleared only when i restart the weblogic domain.
here is some information about my development environment:
Jdeveloper 11.1.2.3
WebLogic Server Version: 10.3.5.0
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
thanks in advance

Hi,
for performance reasons you should not use dedicated user connections to the database. Instead you use JDBC data sources (default in JDeveloper for ADF BC) that you can configure the database connection pooling for. This means that your v$session will always show a set of active session, which however are shared among users. Assuming you use ADF BC, this is what happens
- A user requests a data bound page
- The ADF BC checks out an AM and connects to the database using one of the database connections in the pool
... user work here ...
- user exits application
- ADF BC returns AM to pool and passivates pending user state (if application is left with dirty transaction)
- Database connection is available in pool as soon as AM released
This also happens between requests. Long story cut short: v$session doesn't give you a true picture
Frank

Cisco 7921 Wireless DCHP Timeout after loosing connection

Running 7921
AP 1200 Software Version 12.3(4)JA
I'm having a problem that after I set the phone up. Everything comes up fine and works great but whenever I hit a deadzone or if it looses connection, the phone will try to configure the IP and then it gives me a DHCP timeout and never connects again. If I reset my TFTP settings it then works again. How can I prevent this?

Yes per my 7921G Deployment Guide @ http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/7921g/6_0/english/deployment/guide/7921dply.pdf, you need 12.3(8)JEA or later to run the 7921G phone successfully.
12.3(8)JEC is ok for the 1230, but would suggest 12.4(3g)JA1 or later for the 1240.
For static WEP, need to ensure the keys on the AP and the client match. If you have 2 keys where one is tx on key 1 and the other is on key 2, then the other side needs to have the same key to be able to decrypt the packets.

Smb2 of 10.9 is not working again after loosing connection by standby rules or because it was untouched for hours

if the computer went to standby or is untouched for hours the smb connections are dissappeared from finder.. even an open finder windows on an inner directory of such a connection is then empty. I am used to that.
Before 10.9 I could then with cmd + k (go to - Server) reconnect to the smb-Server.
Now this is not working anymore, instead there is a window which is telling me that there is a problem and I should go asking my administrator...
At first I thought the self implementation of smb2 is a good thing - it felt running a bit faster - but in that way it is unusable : I have to restart my Macbook or my Mac Mini to get back a working connection - and I cannot resist to say : such thing is not happening with MS Windows :-(
Is there any trick out there to work around this problem - actually I got to ask: Am I the only one who is experiencing this problem ?
Many thx
Best Regards,
Andre

I found the reason the downgrade was not working. It had to do with restrictions of compressed files in the firewall, I allowed compressed files though and it downgraded just fine.
So... as far as I am concerned that fixes the problem for now. Unfortunately it seems that the ndiswrapper business is not getting any better since the last two upgrades broke my wireless (and I'm sure countless others out there).
R.

10.7.3 issues with reconnecting to the Internet after waking from sleep mode?

My iMac worked great until this last update. Now it does not connect to the internet after I wake it from sleep mode. Any fixes?

I have a similar issue. My connection has been rock-solid since we went to Uverse, and now my computer loses the internet every 60-90 minutes or so. Driving me nuts. iPhone still on wireless router to internet, so problem seems to be computer.

To execute the query after getting connected to db from a unix shell script

How the variable "output" can be used in the sql query after getting connected to database.
Code:
#!/bin/bash
sort shipments | uniq > test1.txt
sed "s/.*/'TESCO.&',/;$ s/,//" test1.txt | paste -s -d '' > output
sqlplus glo/glo@tcot
select * from xx where column_name in ($output)
In this case, am getting connected to database, but cursor is waiting at sql prompt, with out executing the above select query.
Please help.

Try something like:
#!/bin/bash
sort shipments | uniq > test1.txt
sed "s/.*/'TESCO.&',/;$ s/,//" test1.txt | paste -s -d '' > output
sqlplus glo/glo@tcot << EOF
WHENEVER SQLERROR EXIT 1;
WHENEVER OSERROR EXIT 1;
set serveroutput on
declare
v_data varchar2(100) := NULL;
BEGIN
select col_name into v_Data from xx where column_name in ('$output')
and rownum < 2;
dbms_output.put_line(v_Data);
end;
exit
EOF

Create new user session after RFC connects

Hi,
My client is non SAP. They connect to SAP through an intermediate software , using RFC connections. My client requires that when creating a BOM through BAPI, the "created by" column should have a user name they pass, and not the username with which the RFC connected .
Is it possible to have a FM in which I can create a new user session, passing username and password, call the bapi that will create the BOM with this username, and close the session?
Kindly help.
Thanks in advance

Most security audits will trigger a warning when they determinate that the RFC common user is allowed to use another logon id. Usually you can provide auditors a list of such id with explanation before the audit execution, sample of explanation to provide :
- The RFC enabled FM which create the batch job must pass the logon id to be used, and the calling application must not allow user to change this value.
- The RFC default logon, should be allowed to the minimal authorization required, and could be for example allowed to no transaction, only some RFC FM. (start with [Note 460089 - Minimum authorization profile for external RFC programs|https://service.sap.com/sap/support/notes/460089])
Regards,
Raymond

My KDE forgets the session after restart

Hello
When I restart my KDE it forgets the session, the started apps and all the passwords I have put in the KDEWallet during the session. Does anybody has the same problem and do you have any idea how to fix it?
Thanks

Could be file permissions, or it could be a settings issue. Look around for settings for the two things, and if session saving is on and stuff like that, try the following.
chown yourUsername:yourGroup ~/.kde/ -R
chmod u+rw ~/.kde/ -R
Then reload KDE and attempt to use the mentioned features again. If checking settings and changing permissions does not work, then try running KDE via a virtual terminal so that you may look for error information if any is produced. Good luck.

HT4356 After shutting down my router and PC, I can get my iPad to wirelessly connect to my HP 3050A printer. After a period of time the connection is lost and I have to start all over shutting things down. The PCM never looses connection with the print

After shutting down the router and connected PC, I can get my iPad to connect to air print to my HP 3050A printer. Connection is lost after time and I have to start the whole process over again. Any ideas? Thanks.

Thanks for the response Grant. I had both set to "never" and the power connected. I did however find while searching the forum page, an answer already given to another enquiry. The security/general tab. I had it checked, now unchecked am hoping it will solve my problem. Thanks again, Cebustu.

Reconnecting to channel set after lost connection

Hi there,
I am beginner to flex and I have a problem with to login after the connection to the BlaseDS has been lost.
Setup:
The flex client calls a HelloWorld Java service exposed using spring-flex. This service is called when the user hit the Hello World button on the UI. The channel set on which this service is exposed is secured and for now we will resort to programmatic authentication. (The user does is not required to input his username and password, just to simplify it a bit).
As a client framework Cairngrom is used and an appriopriate delegate is setup to handle the remote object call.
Here is a snippet from the HelloWorld delegate class called after the user hits the Hello World button.
          public function getHelloWorldMessage():void{
            if(!__service.channelSet.authenticated){
                var token:AsyncToken = __service.channelSet.login("username", "password");
                token.addResponder(new AsyncResponder(
                    function(event:ResultEvent, token:Object = null):void {
                        Alert.show("You are logged in", "Login");
                        // Send the amf request to the backend.
                        var token2:AsyncToken = __service.getHelloWorld();
                        // Add the responder.
                        token2.addResponder(__responder);
                    function(event:FaultEvent, token:Object = null):void {
                        Alert.show("You are NOT logged in", "Login");
            }else{
                // Send the http request.
                var token2:AsyncToken = __service.getHelloWorld();
                // Add the responder.
                token2.addResponder(__responder);
The __service is the Hello World service has been defined as follows.
<mx:RemoteObject id="helloWorldServiceRemoteObject" destination="helloWorldService" channelSet="{helloWorldChannels}"/>
<mx:ChannelSet id="helloWorldChannels" >
        <mx:AMFChannel uri="http://localhost:8080/helloworldservice-war-1.0.0.SNAPSHOT/messagebroker/amf/" />
</mx:ChannelSet>
What happens:
User clicks on the Helloworld, the program hits the getHelloWorldMessage and the ChannelSet.login("username", "password") is called.   The channelset authentication flag is set to true, and the _authAgent present in the ChannelSet class which was previously null is set
The success handler is called and the secured spring function returns the "Hello World" message.
I restart the BlaseDS server to simulate an intermittent connection.
Now the user clicks on Hello World button again and recieves an error since the authentication flag is still set to true there is no attempt to login again.
The following FaultEvent is caught
faultCode=Client.Authentication
faultString=An Authentication object was not found in the SecurityContext
The user reclicks the Hello World button this time however the ChannelSet.authenticated is set to false and the client code attempts to reconnect however fails. The snippet below is an extract from the ChannelSet.as, when the user reclicks, the second condition is met and the IllegalOperationException with error message "ChannelSet is in the process of logging in or logging out." is thrown. The condition is met since the _authAgent is not null.
public function login(username:String, password:String, charset:String=null):AsyncToken
        if (authenticated)
            throw new IllegalOperationError("ChannelSet is already authenticated.");
        if ((_authAgent != null) && (_authAgent.state != AuthenticationAgent.LOGGED_OUT_STATE))
            throw new IllegalOperationError("ChannelSet is in the process of logging in or logging out.");
        if (charset != Base64Encoder.CHARSET_UTF_8);
            charset = null; // Use legacy charset, ISO-Latin-1.
Does someone have any ideas as to how to resolve this?
Regards,
Mark

bump! Anyone knows how to solve this?

HT4628 My macbook pro will not automatically reconnect to the wifi after a sleep. This has started after having upgraded to mountain Lion (10.8).

Hi
After I have installed Mountain Lion (10.8) - my macbook pro will not connect automatically to my preferred wifi network. It used to do that on the previous versions. It seems that the mac does not recognize the preferred network, as it asks me to choose a network after evey sleep/restart. I have modified the network preference to have my preferred netwrok at the top of the list. I have tried with/without checking the "ask me before joining a new network". It still behaved the same.
Thanks
Eitan

Try making a new network connection and renewing the DCHP lease as detailed here:
fix-os-x-mountain-lion-wireless-connection-problems

Theres no ipod icon on the side AFTER i connected the ipod!

help me!i connected it already!!!!
Windows XP

Hi roblesb,
Thanks for visiting Apple Support Communities.
I'm sorry to hear that you did not receive the information you needed at the store.
It sounds like you are trying to sync your iPod using a computer. If so, this article shows how to locate the iPod icon in all iTunes versions:
Locate and view your connected iPhone, iPad or iPod touch in iTunes
If you need to download the latest version of iTunes for your computer, you can find it here:
Apple - iTunes - Download iTunes Now
All the best,
Jeremy

Whenever I sync to the cloud I loose connection

When I select pause sync, the internet is fine. I read somewhere to try to port forwarding. I am not very familiar with port forwarding. I have taken a screen shot of my router screen and I have the information but don't know which fields to put it in to. Would like some assistance with it.
ccmdl.adobe.com:80
swupmf.adobe.com:80
swupdl.adobe.com:80

Hi,
i am sorry you are having some issues with using Creative Cloud.
The following host/port combinations may need to be whitelisted when logging in with an Adobe ID to download, install, and activate licensing for applications via a Creative Cloud membership.
ccmdls.adobe.com:443
ims-prod06.adobelogin.com:443
na1r.services.adobe.com:443
prod-rel-ffc-ccm.oobesaas.adobe.com:443
lm.licenses.adobe.com:443
ccmdl.adobe.com:80
swupmf.adobe.com:80
swupdl.adobe.com:80
The above information is to enable Creative Cloud to operate without an issues, however, there may be some other issue with your setup thats not taken into account that is causing your connection to drop some reason, do you have the same issue for other cloud services?.
Thanks
Warner

Reconnecting to the session after loosing connection

Similar Messages

Maybe you are looking for