Reconstruct / receive problem after a smtp crash / pop receiving problem
Hi,
The smtp hooked up yersteday, I deleted the locked files and it could then send emails again... Thanks to Chad for his help.
After restarting all the services, it appears that I can receive mails only from my webmail. When I try with Outlook, it says that there is no new mail. When I connect with my wemail it says there are new mails. Why ?
I tried reconstruct -m and -r -p primary, also cleandb, dirsync, etc... Nothing does.
The IMAP service is also functionning, but even if there are emails in the folders, it says they are empty.
Please help me, I am short with ideas
Thanks Fr�
It often really, really helps us to help you, if you let us know what exact version/hotfix you're running.
If you had a serious crash, you may have some damaged index files. When you ran reconstruct -r, did it complete, or did reconstruct crash at some point? Have any of the processes crashed since the big problem?
I'd suggest stopping all the messaging server, checking that all the processes are indeed down,
restarting it,
run
reconstruct -r -f on yourself
reconstruct -r -f user/your_userid
Similar Messages
-
Hi,
There was ios 4.1 in my iphone3gs.i have tried to update it through itunes but there is a problem.After installation through itunes,there is problem that it is not activating my iphone and shows a message that your iphone could not be activated because the activation server is temporarily unavailable,try connecting your iphone to itunes to activate it,or try again in a couple of minutes.i tried many times but it again shows the same message,
after installation,when i connect my iphone to itunes it shows a message that we are unable to activate your iphone at this time please try again or contact customer care.please reply me urgently to resolve this problem.That is usually a symptom thet the phone was hacked or jailbroken. Was it?
-
Activation After C-Drive Crash - Customer Support Problems
We are having a terrible time with Customer Service... I hope some folks might help lead us into the correct direction.
I had a crash on my main computer where the C-Drive bit the dust.... and yes, it did not allow us to deactivate our copy of CS4 Master Collection. Fortunately I do have my travelling copy on a small laptop.
We installed a new C-Drive, but had to reinstall CS4... then the activation message reads that we have too many activations... and I know that, because one of them crashed. We simply need the crashed copy to be deactivated, so that we can reactivate on the newly constructed C-Drive.
My seventh (yes, 7th) phone call and over a culmulative hold time of over 9 hours (yes, 9 hours). Over the span of two weeks, Customer Support tells me that their Activation Interface is not working (ugh!). One person on the sixth call, this morning, transferred me to another Customer Support area where I was immediately put on hold for 2 hours and 9 minutes at which time the line went dead.
I was told to install the copy and work through the 30 day trial period, but I'm now on 16 days left and Customer non-Support not able to to help me yet.
Am I alone with my problem or or others having problems dealing with Customer Support?
If other's are aware of similiar issues, could you help direct to alternate phone numbers, contacts, websites where I might be able to receive some support. Spending another $2,500 on software just doesn't sound like a solution when I've been an Adobe user for almost a twenty years.Sorry, I cannot help you, but your problem is similar to the one I have. I used to run cs3 on a notebook only, toshiba qosmio g30. After severe troubles they changed the mainboard and the discs were formatted and during this long lasting service time I installed cs3 on a workstation just to go on with my projects. Now I want to reinstall it on the toshiba qosmio and I get the same license messages you mention in your posting.
I asked adobe for help using the online support form but the did not anwer so far. I think that adobe did not even ignore my troubles, as the question I put did not lead to a new open case.
Maybe I will make more use of the new microsoft products and other software as many things can be done without adobe as well. A couple of years ago I left quark (for adobe) and I do not miss quark so far (maybe they miss me as I was not the only one that went away).
Good luck, guys! -
Adobe After Effects CS5 Crash and compatibility problems with Windows 7 64-bit
Hello,
I get a lot of crashes of After Effects CS5. I get the message thar Monitor Kernel program stopped responding and recovered.
I also did a compatibility test and found that After Effects CS5 is not compatible with Windows 7 Premium 64-bit.
Could you suggest a solution please?
Thank you
Giannis StravolaimosI solved the problem by myself.... as usual
-
Freezed problem after applying Clicks and Pops filter
It always halt after I have submitted Clicks and Pops filter.
Dropping by just to thank you again for your feedback and to let you know that the problem no longer exists. I do still work with Logic Pro 9 at 32 bits (I'll move on to 64 as soon as I finish all the ongoing work started under 32 bits) and I did maintained the buffer size on 256.
I noticed that MOTU had launched a new driver version so I installed it just to realize that the loud poffs and cracks evolved to tiny crackle noise, like static on radio waves, that happened every 2 or 3 minutes, the noise starting slowly (few cracks) then accelerating (many cracks), lasting 5 seconds each time. Then silence (music) again. Major upset.
Then I was notified (as we all were I guess) that a Mavericks update was available. Run the update, a long one I should say, and, problem solved, no more noises - just plain music.
So everything's cool again. Finishing up some more instrumentals without unwanted noises.Thank you all, thx Nigel.
Francis Mann -
Problems after force reboot. Hard disk problems
Yesterday, I ran a c program on my work station. And, the program have some big out puts, files with size 2G,7G.
And then the disk was filled. Then some problem happened.
When rebooting it shows something like:
INIT: cannot execute "/sbin/agetty"
INIT: Id "c2" respawning too fast: disabled for 5 minutes
And then, after some time. It successfully boot up. But there are still problems:
when I try to delete or mv or cp some of the big data, the /home directory file system automatically remounted as read only file system.
And I try to reboot it. It again seems ok, but still can't do any thing to the data, if I try the same thing happens again.
After some search, I thought there must be some problem on the disk. And try to fix it.
I find a unbuntu 12.04 CD, use the disk utils, I mis-formatted the swap area.
Now, it is repeating the error like:
INIT: cannot execute "/sbin/agetty"
INIT: Id "c2" respawning too fast: disabled for 5 minutes
and can't boot.
What can I do now. How to fix my disk? It a workstation for many people, and the disk is of size 1 T, the /home directory has a size about 800 GB with 780 used.
What I can do?/home partition doesn't count in this case - it can be filed 100% if it's separate partition. For system to work properly you need some space left on root partition.
Boot-up live cd and see what's your disk usage looks like.
PS did you tried cp or mv files from within live cd?
Last edited by masteryod (2012-11-21 15:47:18) -
hi i have a popup pronlem its show me problems with my device accesory and interfirence and dont know what do do video sounds not working at all
Clean the grit out of the dock connector with a dry toothbrush.
-
Airport problems after 8/12 airport and security update
My MacBook Pro which had been working flawlessly since I got it last year received the airport and security updates distributed today. After the reboot my airport turns itself off after a few minutes and will not come back on and the computer seems to be running hotter than usual. Booting from a recent clone of the drive without the updates did not fix the problem and the card turned itself off a few minutes after the reboot and will not come back on.
Anyone having similar problems after the update?Does your problem occur only when unplugged. If so, then maybe this update is for you: http://support.apple.com/downloads/AirPortClient_Update_for_MacBook_and_MacBookPro. Check it out, but use your own judgment in installing; not much info is provided.
-
Printing Problems after Reader 10 install
Recently deployed Reader 10 to about 300 workstations using Group Policy. Several machines are no longer able to print to some of the network printers. These printers are HP printers using the Universal Print Driver. When trying to print we get an error and the Adobe Reader application crashes. It will however print to other network printers that are using an older device specific driver, printing to the same print device. Have downloaded the latest HP driver, but it has not helped the situation. The printing worked fine with Reader 8 and Reader 9. Anyone with an Idea?
Sorry only know Windows: Edit (menu)>Preferences>General>Application Startup>Enable Protected Mode at startup.
Wayne Capra
Date: Wed, 26 Oct 2011 10:37:59 -0600
From: [email protected]
To: [email protected]
Subject: Printing Problems after Reader 10 install
Re: Printing Problems after Reader 10 install
created by Al1iOop in Adobe Reader - View the full discussion
I am using a Mac 10.6 and cannot find the "Enable protected mode at startup" in General or any other options. Does anyone have an answer for Macs? Thanks.
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/3991540#3991540
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/3991540#3991540. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Adobe Reader by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746. -
Light Flow / Accessibility Problems After Update ..
OK Light Flow problem after update.... the problem is my Talk Back in Accessibility keeps turning on after i restart my phone i know it should not do that it only dose it when i have Light Flow - LED & Notification installed and Tturned on in Accessibility ..... i use Light Flow - LED & Notification to control my LED Notification becuse i hate the built in feature that came with the phone the default management keep the LED to dim hard to see ........ i have used the app ever scene i got the phone and never had a problem tell this crappy update JZO54K.I535VRBLMD3 / I535VRBLMD3 came out i also believe the update JZO54K.I535VRBLMD3 / I535VRBLMD3 that was pushed out made the Accessibility option bad / and everything else
The phone is new
i have hard factory reset it / battery pulled
it did it with old phone but did not do it before that update was pushed
i also got a (NEW) NOT REFURBED phone trying to solve the poor 4G LTE signal /battery life
and over all phone performance with no luck that update was a bad one and needs to be addressed
PLEASE FIX THE PROBLEM >>>>> VERIZON SAMSUNG GOOGLE ( PLEASE )yep, I had that same problem too, but found a work around. First I tried disabling the accessibility options (but that was no good, I like the light flow notifications). I read from the app (see bottom of opening screen):
I found the work around to be just getting a folder app from the play store - the only talking it was doing was "opening folder" "closing folder" (annoying as he!!)
See the second screen for what that says as far as options. My opinion - just get the folder app, it's easier. -
great Problemes after installing Yosemite (10.10.2 ) with Photoshop CS6....The program crashes --last time 10 times during my work session..wacomtable doesnt work..it is slow...and get error messages about the graphic card....It s a Terror to work with my beloved Photoshop!
The Yosemite upgrade very often damages existing Photoshop installations. Thank Apple for that.
You need to uninstall and re-install Photoshop, then apply all the Photoshop upgrades from scratch.
But first, give us details about your setup:
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
A screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks! -
OS 10.7.4 - reconstructing the setup after a crash by default
Hi there,
running on OS 10.7.4 I am working with CAD software. One of our files caused the application to crash (force quit required). When relaunching the application, by default, it tries re-opening corrupt file - and of course causes a freeze again...
ApparentlyMac OS 10.7 reconstructs the setup after a crash to how it was immediately before, so can I/how can I change this to start the application without a file to avoid this circle of crashes?
Many thanks!Disable the ability of OS X to relaunch the problem program, then move the corrupt file out of it's location on the drive.
When you Force Quit, then when in the Finder locate the problematic file and delete it or move it. -
Hi, i am having trouble with my mac mail account, i cannot send or receive any emails because of the server connection problems. Message says it could not be connected to SMTP server. Thanks in advance for your help.
Hello Sue,
I have an iPad 3, iPad Mini and iPhone 5S and they are all sluggish on capitalisation using shift keys. I hope that Apple will solve the problem because it is driving me crazy.
I find using a Microsoft Surface and Windows 8 phone, which I also have, work as well as all the ios devices before the ios 7 upgrade.
It has something to do with the length of time that you need to hold the shift key down. The shift key needs to be held longer than the letter key for the capitalisation to work. For some reason, this is a major change in the way we have learnt to touch type on computers. I am having to relearn how to type!
Michael -
My old mac was requested to upgrade Firefox to 14.0.1. After the sucessfully installation, I received a message saying my old Mac couldn't use the new Firefox and Safari crashes. I have NO browser now! Any help would be appreciated.
Hmmm... So you upgraded Firefox and now neither Firefox or Safari will work? Very weird. I have no idea what might have gone wrong. That said, when things start acting wierd, I always try a bit of maintenance first. About 95% of the time, I luck out and it works.
I use the free program Onyx. I run all the clean up routines. Then I boot to the recovery partition (Lion) or the OS X Install Disc and repair permissions and verify/repair the hard disk.
Hope this helps. -
Having problem with gmail smtp outgoing server. Since going to google 2-step, and entering 16-digit code in gmail account, I can receive mail on my iMac, but cannot send. I keep getting an error message that Mail "Cannot send message using Gmail (my assigned name) server." What do I do?
Confirm you did this: https://support.google.com/mail/answer/1173270?hl=en
You might also try removing all gmail passwords from your keychain in Keychain Access. Then connect again and enter the password code given by Google.
Maybe you are looking for
-
I have $8.05 balance on my gift card. I tried to buy an app more expensive than that so i had to add my credit card to the apple account. But I couldn't use the balance from the gift card anymore. How can I select to use it? or did I lose it?
-
Hi, I have a variable declared in one of the JSP files. How can I access that variable from another JSP page? For ex: jsp1.jsp <% String hello = "Hello world!"; %> jsp2.jsp <h3>The string is <%= hello %></h3> I know this code wont work. But how can I
-
How to launch factory image after format of hard drive
I have an HP TouchSmart600 PC that had a nasty rootkit. I've backed up the Factory Image partition, and then deleted all partitions and formatted the entire drive. I will restore the Factory Image partition from backup. NOW.... how do I access it
-
Why is my ipad and iPod with different apple ids not loading apps and iMessage not working? Wifi is working as can you the browser Have tried restarting and resetting
-
NEF files will not download into PSE 9.
Just bought a Nikon D7000 but the NEF files are not compatible with PSE 9. I downloaded Camera Raw 6.4, which took a long time due to interuptions so am not sure it loaded properly. Any other ideas out there to make this work? Nikon admits they ch