Reconstructed Welcome page will not animate a .gif clipart

Upon having to reconstruct my Welcome page because the weblinks had to be re-entered thanks to a friend informing me they were not engaging, upon rectifying the weblinks, when I published the changes, the animated gif did not appear. After several attempts, I reconstructed the page by getting a fresh page. I was able to successfully copy-paste the contents, retype the side-bar that included web links, pasted in from file, the animated gif. It pasted in but would not animate. I tried many times over with no results. Gifs located on other pages are active. But, this one that is animated on the website were I download it

Yes, it is about the flying dove. I'm not changing the subject, apologies, if you thought I was.
Yes, the dove animates on the previous welcome page which no longer exists as I am in the process of uploading the entire website. I will not know if the animation occurs until I finish the upload.
Right, you are. It is not an iWeb issue if the gif file does not animate when I open the file on the desktop. But, as I typed this sentence, my brain awoke to the idea that I must not open the file, copy, paste it into iWeb. Instead, one must drag the file into iWeb. I just tried that and VOILA! the animated bar is there.
You just prodded me enough to resort to using my brain with your last sentence. I had completely forgotten that gif files are drag files.
Case resolved.
Again, thanks, for taking up your time to move me forward. One gets bogged down, if not weary, when they have problems with their projects.
Cheerio!

Similar Messages

1 sheet with multiple pages will not show various page numbers

I'm having a difficult time differentiating between pages and sheets in Numbers. For example, I have 1 sheet with 5 pages. I am inserting page numbers (done, re-done several times after looking through the forum), but each page will not print with a sequential number (ie. 1, 2, 3, 4, 5). Instead, each page is 1. When I scroll over the number "1" on, say, page 3, the number 3 shows up. But unfortunately t will not print with anything but page number 1.

I am having a problem that is close to this, when I try and preview my site in browser some of the pages show up as a white and gray blocks only. I can not seem to find any reason or connection to what pages are doing this. The only page that has a video seems to work fine. Its almost acting like the links are broken or something. Any help would be welcomed.
Thanks
Mike

The Counter on Welcome page is not showing up. How to find it?

Bottomest line is: My first Welcome page is not showing the Counter. I put a counter on it and nothing shows. I tried disassembling the page by lifting layers, and maybe I did it incorrectly, but I cannot find the errant Counter.
I tried going to the menu and de-selecting the Counter and then selecting it again, but that did not fool iWeb. It did not put a second Counter on my Welcome page because it knows that Lorna already put one there and it does not care that to the average non-Superman eye, it is invisible.
QUESTION:
How do I find that invisible Counter? What must I do, or do better?
— Lorna in Southern California

Is the welcome page the page with the big picture of
a flower overlaying everything, linking into your
site? Your page source does show a counter to be
present at location 34 pixels from top of page and 40
pixels from the left, but you have the picture over
it!
.......... Lorna says ................................................
Yes, that is the welcome page: the pink flower. What page source? How do you see a page source? Anyhow, I went to the Welcome page in iWeb and moved the pink flower picture to the side and out of the window. I see nothing! No Counter and no picture covering a Counter. The only picture I see is my pink flower picture.
It is probably still counting, but you won't be able
to see it. If you remove your picture (or make it
smaller) and republish you will see it.
.......... Lorna says ................................................
But I have moved the pink flower picture away and have cleared the field and see nothing. I did not make the picture smaller; if I can just push it out of the way, why would I need to make it smaller? (I suspect I am missing something here.)
Lorna in Southern California

Application Server Control Panel page will not load

I am new to Oracle Application Server and need some assistance to determine why the Application Server Control Page will not load after entering the username/password for ias_admin. I have just installed Oracle Application Server 10g (10.1.2) on Redhat Linux.
The Listener and the Repository Database are up. I have successfully started the processes for the OracleAS Infrastructure instance with:
$ORACLE_HOME/opmn/bin/opmnctl startall
I have successfully started the OracleAS Console with:
$ORACLE_HOME/bin/emctl start iasconsole
I ran "emctl status iasconsole" and received:
http://localhost.localdomain:1810/emd/console/aboutApplication
Oracle Enterprise Manager 10g Application Server Control is running
Logs are generated in Directory ...../sysman/log
I ran "opmnctl status" and received:
Process in Instance: oraappserv1.localhost.localdomain
ias component process type pid status
LogLoader logloader N/A Down
DSA DSA N/A Down
dcm-daemon dcm-daemon 0 None
HTTP_Server HTTP_Server 6180 Alive
OC4J OC4J_SECURITY N/A Down
OID OID 6199 Alive
I can bring up the "Welcome to Oracle Application Server 10g Release 2 (10.1.2)" web page successfully with "http//<host>:7777".
My problem arises after I click on the link for " log on to Oracle Enterprise Manager 10g Application Server Control". I enter the username/pwd for ias_admin and then progress bar on the status bar of the browser goes so far and stops. The Application Server Page will not render.
Can someone point me into the direction of what to check, whether its an enviromental setting for linux or a configuration issue with the Application Server?
note: that the status bar for the browser shows "shortcut to localhost.local domain" when highlighting the link " log on to Oracle Enterprise Manager 10g Application Server Control". This is different than <host> specified in the URL to render the welcome page. I would't think this to be an issue because the login screen came up and it also appears in the results of the emctl status iasconsole and opmnctl status commands.
Thanks in advance for your assistance.

Emilio, note implies emagent core dumps. If that is the case emctl would (hopefully) not return status "ok".
Here is my output with sysman oc4j running but emagent gone (AS 9.0.4):
$ emctl status iasconsole
Oracle Enterprise Manager 10g Application Server Control 9.0.4.1.0
Copyright (c) 1996, 2004 Oracle Corporation. All rights reserved.
EM Daemon is not running.
Also, if you login to AS Control does it redirect browser to http://localhost.localdomain/... ?

Bing homepage will not animate

When I go to bing.com using Firefox (v24+) on any PC I use, the homepage will not animate (if there is an animation video under the Page Info)
Example: http://www.bing.com/az/hprichv/LavaWater_GettyRR_111842335_EN-US.ogv consist of the URL that animates on the Bing.com homepage.
But when using Firefox and you go to bing.com, it's just a picture: does not animate.
I've tried to upgrading my Adobe Flash, Shockwave, Silverlight, etc, however, still have the same issue.
When I access bing.com via chrome or IE it animates just fine.
Is there something I need to add/change in the settings?

Bing home page video area was blank for me, although I did get the pause control. Thinking it might be a script issue, I enabled facebook.net on the NoScript menu and reloaded the page. The video and a row of small images quickly appeared. I disabled scripts from facebook.net and the video stayed, so I'm not sure whether that was relevant, or I just needed to reload the page. Either way, not sure why the delay.
But... you're saying that even the direct address to the video does not work for you?
Before tinkering with other Firefox settings, have you considered updating your VLC? I think in the past it might occasionally have caused issues with Firefox's native HTML5 video player, and your version is about 18 months old now.
http://www.videolan.org/

4.01 automatic update today 4.29.11, now pages will NOT load at all, just hangs there saying connecting. Tried system restore, re-installing, only way to get it to work is to boot in safe mode. Running W7, 64bit, I5, 2.53 ghz, 4GB, ati radeon 5470

I've been using firefox 4.01 Today (4.29.11) it downloaded an update and now the pages will not load. I tried disabling the add ons, system restore, un-installed/re-installed but the page hangs there and just says connecting. I booted in safe mode with networking and it worked. Running W7, 64Bit, I5, 2.53GHZ, 4GB, ATI mobility radeon 5470

I've been using firefox 4.01 Today (4.29.11) it downloaded an update and now the pages will not load. I tried disabling the add ons, system restore, un-installed/re-installed but the page hangs there and just says connecting. I booted in safe mode with networking and it worked. Running W7, 64Bit, I5, 2.53GHZ, 4GB, ATI mobility radeon 5470

When I go to yahoo with my iPhone 6 the pages will not enlarge when I pinch them but it works on my iPad. Does anyone know what's wrong?

When I go to yahoo with my iPhone 6 the pages will not enlarge when I pinch them but it works on my iPad. Does anyone know what's wrong? Also the same on boyfriends phone he's eith Virgin and I'm with Vodafone do it cant be the providers.

Thanks for the link but none of those described the problem. No error message pops up. It just says "Accessing Itunes Store" but it never actually does. This only occurs when my iPhone is plugged in though.

For some reason my 09' pages will not view documents created in Word 10' any suggestions?

For some reason my 09' Pages will not open any documents from 10' Word. It simply opens up blank. Any suggestions?

I updated my pages and os. I am currently running 09' pages and os 10.6.7. The link I gave you earlier was not correct. I have attached one I just opened up with microsoft word on another computer. My pages opens up but is blank. The link is below:
https://www.vendorportal.ecms.va.gov/FBODocumentServer/DocumentServer.aspx?Docum entId=191194&FileName=VA-255-11-RP-0197-0004000.doc
The only other thing is that word opened it up in compatibility mode and said that the document originated from the internet. Could this be something that is causing pages to not open? Thanks for all of your help.

I cant copy/paste from an article to my web site, get a Mozilla Rich Text Editing demo page will not work.HELP

Tried to copy/paste from an article to my web site and got a "cannot copy /paste " warning and was directed to a security perferences site that said that Mozilla Rich Text Editing demo page will not work.
Tried to find my Firefox profile directory using the start menu and was directed to hit enter to go to web. Feel like i am getting run around.

Let's start with something very basic, and that is, you do not need to use the paste button on most websites. The button just reads what is on your clipboard and sticks it into the form. You can do that yourself using Ctrl+v or right-click>Paste.
For your security, I suggest using those standard Windows keyboard shortcuts (Ctrl+x cut, Ctrl+c copy, Ctrl+v paste) or the context menu.
Occasionally you will find a paste button that runs a clean-up script or otherwise does something useful. That is where the (admittedly a bit complicated) instructions come in handy.
To open your active profile folder, you can use:
Help > Troubleshooting Information > "Show Folder" button
Which help article are you using for the modifications?
Finally, please be cautious in opening up your clipboard to sites. You may have stuff you copied from other pages or other programs that you do not want to share with most sites.

My time capsule seemed to have given up so I have just got a net gear router, I have no problem connecting wirelessly but when I connect an Ethernet cable it says it's connected but pages will not load

My time capsule seemed to have given up so I have just got a net gear router, I have no problem connecting wirelessly but when I connect an Ethernet cable it says it's connected but pages will not load

Do a factory reset .. nothing will be deleted from your backups and you will be able to get access to them again.
The Factory Reset Gen1-4.
Unplug your TC. Hold in reset. and power the TC back on.. without releasing reset for about 10sec. When the status light flashes rapidly; release it.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.

How can I get back my Word docs now that Pages will not open them?

How can I retrieve my Word docs now that Pages will not open them in Mavericks. I have a brand new iMac with my evolving manuscript for a book transsferred from my now defunct MacBook Pro by external drive. Pages tells me that "PowerPC apps are "no longer supported" and Mavericks will not open Microsoft Office, though it is still in Applications. Would really appreciate ANY help!

You will have to have an app that will open them first, you can upgrade to Office for Mac 2011 which is an Intel based app then open the docs and retry. Your docs were created with extremely old version of Office for Mac, version 2004!
Another possiblity is using a web based compatible MS Office for Mac app and see if it will open your doc and then save it, then attempt to re-open in Pages.

Oem web page will not display after O/S dst patch

Hello,
The Grid web page will not display after we DST patch for the o/s.
All below start fine without any errors:
emctl start oms
emctl start iasconsole
opmnctl startall
emctl start agent
The Grid web page is not displaying. What might happened after the o/s dst patch that might cause this? Our GRID is 10204 with a 10104 repository. The 10104 has not yet been dst patch.
What logs should I be looking at to figure why the web page is not displaying? Thank you.

Provide the output of these comands:
$OMS_HOME/bin/emctl status oms
$OMS_HOME/opmn/bin/opmnctl status
$AGENT_HOME/bin/emctl status agent
$DATABASE_HOME/bin/sqlplus "/ as sysdba" << EOF
SELECT STATUS FROM V$INSTANCE;
EOF
$DATABASE_HOME/bin/lsnrctl status LISTENER_NAME
Regards

Since the update loaded on my computer my web pages will not load and i get invalid url message

Ever since firefox updated to 17, my web pages will not load. When I type in the search bar and hit the enter button, the address switches to https and i get a message stating that my page is an invalid url and the following message
Reference #9.1db78443.1354339468.3c70717c
I have cleared my histories and cookies and restarted my computer but cant get it to work.
I can type in www.google and go directly to the google page and then gain access to my pages, just not through the firefox address bar.

'''Try the Firefox SafeMode''' to see how it works there. <br />
''A troubleshooting mode, which disables most Add-ons.'' <br />
[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode#w_safe-mode-window_2 Troubleshoot Firefox issues using Firefox SafeMode]
When in Safe Mode... <br />
* The status of plug-ins is not affected.
* Custom preferences are not affected.
* All extensions are disabled.
* The default theme is used, without a persona.
* userChrome.css and userContent.css are ignored.
* The default toolbar layout is used.
* The JIT Javascript compiler is disabled.
* Hardware acceleration is disabled.
* You can open the Firefox 15.0+ SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
'''''If it is good in the Firefox SafeMode''''', your problem is probably caused by an extension, and you need to figure out which one. <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes
''When you figure out what is causing that, please let us know. It might help other user's who have that problem.''

MS Outlook People page will not load in Firefox. It loads in other browsers.

I use Outlook and when I use it in Firefox version 21.0 the People page will not open. When I use Outlook in another browser the people page opens without any issues. In firefox it just clocks and clocks an then since there is a problem and stops.
I was told that the adobe add on was an issue, I tried disabling it, and installing the latest version and it still will not work.
I deleted all my cache still will not work.
Any ideas?
Thanks

Hello,
Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!
Thank you.

I wanted to send a push notification, unfortunately it does not work. The page will not load. Anyone know why?

I wanted to send a push notification, unfortunately it does not work. The page will not load. Anyone know why?

Push notifications, I believe, is only for iOS.
If it is for iOS, take a look at Using Apple push notifications with Digital Publishing Suite | Adobe Developer Connection

Reconstructed Welcome page will not animate a .gif clipart

Similar Messages

Maybe you are looking for