Reconstruction of request in BI 7.0

hi All,
In 3.5 , i can go to "Reconstruct" tab in the cube and able to select the request which need to be reconstructed. But in 7.0, is there any way to reconstruct the request like what we used to do in 3.5. Can you please let me know how we should do this in 7.0 ?
Thanks in advance..

Hi,
The reconstruct tab only works for InfoCubes loaded with 3.x data
flow objects (update rules).
In addition to this, this function only works if the data is stored in the PSA,
But since you know in BI 7.0 there is no PSA when u load data from DSO to Cube.
Regards,
Mansi

Similar Messages

Reconstruct load request

Hi,
What seetings are required for a load request to be available to reconstruct a deleted request in DSO.

Hi ,
In order to reconsturct the major requirment is the load should be through PSA ..
For reconstuction you have to first delete the request from target and then reconstuct it form RSA1 >>PSA ...
1.if its not through PSA .. so in order to make it thorugh pSA first load the data till pSA by running the load with the setting only PSA in processing tab..
and then click process manully .. to update it to target ..
2. or you can add update from PSA step in your process chain ..after your laod and put the setting of your laod as only PSA and then into data targets ..it wil laod the data till pSAand the update from PSA step will laod the data further into data targets ..
Regards,
shikha

Reconstruct Infocube Request

Hello Gurus,
We have an issue on one of our infocube. The update rule indicates that the particular InfoObject (External Material Group) is assigned to another InfoObjects (Material) Attribute. However, there are Materials in which the External Material Group field was not maintained from the Source System (SAP R/3). As a result, some records in the infocube have no value on External Material Group field.
As a solution to the issue I am planning to execute these procedures.
1.     Update Source System External Material Group attribute.
2.     Load/Update Material Text and Attribute to BW Server.
3.     Identify Infocube Request ID which has empty External Material Group.
4.     Delete identified Request ID from the infocube.
5.     Reconstruct Request ID.
6.     Check infocube contents.
Are the procedures above correct?
Will these solve the issue?
Hope to hear from you guys. Were using BW 3.5.
Thanks.

Hi all,
In line with my question above, I have tried the procedure but the field in the infocube was still not populated.
Here is the procedure I did in our BW Dev server.
1.     Since there are no data in our BW Dev server I run a full update in the infopackage from R3 QAS server.
2.     Update test material record in R3 QAS server. Update External Material Group fields, assign a value.
3.     Run Material Attribute full update in BW Dev
4.     Check Material attribute of the test material in BW Dev External Material Group field updated.
5.     Go to Infocube -> Manage -> Request Tab, delete request id.
6.     After the job is successful, go to Reconstruction Tab.
7.     Select deleted request id, and click Reconstruct/Insert button.
8.     After the successful execution, check Infocube content.
The records from the specific request id is found in the infocube. However, the field in question is still empty.
Is there a procedure I overlooked?
Are the procedure above correct?
Is there any other way to resolve this issue?
Note: There are no changes in the Update Rules.
Thanks.

Reconstruction of request scoped backing beans

Hi,
I have a jsp which contains the following code:
<h:commandButton action="go_someplace" actionListener="#{bean1.update}" value="submit"/>bean1 is this form's backing bean and it is request scoped.
bean1 is passed some parameters from the former page by putting them in the request to that page.
What I notice is that bean1 is constructed once when the form is displayed, but also a second time before the actionListener (update) is invoked.
As a result, the second request to the bean (the HTTP request) does not contain what it originally did in the first request anymore and the data gets reset.
Can anyone please explain this behavior (and offer a solution...).
Thanks,
Zohar

I tried it and it doesn't solve my problem.
I'll try to explain what I have a bit clearer:
I have a form with a person's details: name, age. A person has a unique id.
I have a form with a list of persons. When I select a specific person a new form is shown with that person's details. multiple forms may be opened, so the person's details form is request scoped.
I pass the selected person's id from the list of persons' form using f:param in the form's commandLink. I retrieve this id in the person's details form using httpRequest.getParameter("com.zohar.selectedPersonId");.
I also added a <h:inputHidden value="#{personDetails.personId}"/>I noticed that setPersonId() is invoked after all the form controls are built, so that the getPersonName() (which depends on the person ID) is invoked before setPersonId() is invoked.
Is there a standard way to do this?

Short dump while reconstructing request in ODS

Hi
I had loaded a request into a few ODS, but later found i had to do some changes to the PSA manually, so i deleted the request from all the ODS and modified the records in the PSA.
Now when i try reconstruction it gives a short dump in one of the ODS with message "Exception condition "NOT_EXIST" raised. ".
Data from this ODS was further loaded to a few other targets as delta and while deleting the request it gave a message saying the delta will be deactivated, I said Ok and the request was deleted.
I was able to reconstruct the request in all the other ODS and cubes without any issues.
what could be the problem???
Regards
Sujai

Hi
I am doing PSA to ODS. The data is available in PSA. the reconstruction went thru fine in the other targets. but when i try it in the ODS that i want it goes for a dump. This is where the error occurs.. shown in the dump..
select * from rsreqicods into table l_t_rsreqicods where
 tabname = i_dta and
 typ = 'I' and
 odssid = i_odssid.
if sy-subrc <> 0.
 raise not_exist. -----> Error in this line
 exit.
endif.
Regards
Sujai

Unable to see the request in Reconstruction Tab of Info Cube

Hi Experts,
We are scm 5.1 version.
Actually I have created extraction process to extract data from Demand Planning area. I have extracted data from planning area also. I can see the request in to PSA as well as Info Cube but I am not able to see the request in reconstruction tab.
Is there any setting to see the request in to Reconstruction tab of the info cube?
Please advise..
Regards
Sujay

Hi rathy,
Is there any way to support the equivalent of reconstructions with the new BW 7.0 design?
I will explian in detail..
Reconstruction is critical functionality for our current DP solutions, it allows us to "reconstruct" old requests from the backup InfoCube (based on what's been kept in the PSA) and use this to restore data in the planning area to a day in the past. It is used whenever there is a technical or user error than needs to be un-done. I believe there is a way to accomplish with the BW 7.0 design.
Please suggest...
Thanks in advance..
Regards
Sujay

ABAP to Delete and Reinsert/Reconstruct Requests in a Cube

I need to write an ABAP that will selectively delete requests from a cube and then reinsert them. The purpose of this exercise is to execute a modified update rule between the DSO and the Cube.
I found FM RSSM_DELETE_REQUEST which will delete a request.
However I need the following:
1) A table that will provide the individual request numbers that I want to delete
2) A FM that will Reconstruct those requests. (There is no "RSSM_RECONSTRUCT_REQUEST) that I can find
As for #1 above, supposedly table RSREQDONE is supposed to have all the requests. However I can't find any rows in this table that provide me the request numbers in the Cube I am deleting them from.

Are you talking about selective delete and reload?
because if you need to load the data with a new/modified update rule, then i dont know if deleting the request and reinserting or reconstructing (- assuming thats what you mean) the requests will reflect or calculate the values differently based on the new update rule.
However you could do a selective delete and reload.
Selectively delete the data for whatever period/selection you require and reload it from the DSO.
Wont this solve your problem
Hope it helps
Regards
Joe

With out deleting request can we reconstruct

Hi,
can any one tell me With out deleting request can we reconstruct the request.

Hi,
loads that come through PSA move to reconstruction tab after deletion so that it can be edited in PSA and loaded again. This is mostly done for delta requests to make sure that we do not loose data in any case.
There would be no point in reconstructing the load which is already there in the target guess you cant do it rather.
Thanks
Puneet

Activation of ODS fails: Change-Log Request ODSR_... does not exist in ODS

Hello Experts,
I have a problem loading in an ODS object in Release BW 3.5. This load is in parallel to loading in a Cube and InfoObjects from 10 different SAP sources monthly.
Everytime, I load data, Activation fails. The Error message is "Change-Log Request ODSR_... does not exist in ODS ..." These Requests (30 requests) are very old starting with the Go-Live date of the application in 2005. If I search for the first Request in Reconstruct, a request without a InfoPackage-Name is found and if I reconstruct the request, all other new loaded Request are activated and everything is fine. The next month, the same error appears, but without the one old request in the list reconstructed the month before of course.
A few months before I had to repair loading and deleted also requests in the ODS. Then I realized my mistake, that reconstruction is not possible, because the request was gone in the reconstruction list. So I searched for the PSA Request in the ODS reconstruction list, found the requests and reconstructed these. Could this be the reason for my current problem?
But how can I stop this error? Reconstructing all of the requests did not work, because one request says, no active update rules exist for this request. So I stopped reconstructing every request of the long list.
Please help me, I could not find any helpful information until now ...
Many thanks in advance,
Hannes

Hi,
For the old requests that you don't want and that are not valid, goto the monitor for those and mark them red. After that you won't face any problems while activating the new requests.
The reason this is happening is that during activation BW thinks that these old requests are valid as they are green and tries to activate them as they are in squence. When it dosen't find them then it gives the error. If you mark them red, they are ignored and the next request is taken into consideration.
Cheers,
Kedar

Re-load request

I have loaded the data into PSA, and the request is loaded into Data Target successfully.
For some reason, is there a way for me to reload this request (from PSA) into the Data Target again?
How should I go about this?
Pleasea advice, thanks.

Hi,
see if its through PSA then you can delete the request from target wothout making it red..
and Go to RSA1 and reconstruct the request ..
RSA1>> copy the data source of IP >> find it in RSA1 and then right click on taht data source find your request ..and reconstruct it ...
hope this helps you ...
Reagrds,
Shikha

Problem with reconstruction....very urgentttttttt

I was reconstructing the request in ODS. After reconstructing the request with out changing the indicator from red to green I activated the request.
It got activated....but with red color in the indicator.
When I am trying to delete that request it is not allowing me to delete it.
Even in the reconstruction tab also I am seeing that request in Red color.
Is there any way rt to delete the request and reconstruct it once again...
Its very urgent....

I just used RSDELPART1 program to delete the request...then I got short dump....
this is the short dump I got
Information on where terminated
    Termination occurred in the ABAP program "SAPLRSSM_LOAD" - in
     "RSSM_RSSELDONE_READ".
    The main program was "RSDELPART1 ".
    In the source code you have the termination point in line 81
    of the (Include) program "LRSSM_LOADU08".

In Details of Monitor screen,why do we have Reconstruct process?

Hello All
Can anyone helpme out
In Details tab of monitor screen,generally we have
Requests
Extraction
Transfer
Processing
Subsequent Processing and
Datastore activation.
But here additionally we have
Reconstruct
Process chian
Other?
Why do we have this additional 3 process
Reconstruct
Process chian
Other?
Actually from R/3 we are loading to 2 targets
1.ODS
2.Cube
Its a Full Upload.
and version is BI 7
Regards
Balji

Hi Balaji,
1. If you Reconstruct the Request from Manage screen of your Data Target,You will get the Reconstruct node in the Monitor screen.
2. If the load Process is running through Processchain you will get Processchain node.
3. Others is for ODS Activation.
-Vijay

Collapsed request in infocube-How to get delta back

Hi All
I am loading the data from one ODS to cube1,cube2 and ODS1.
this is the delta update.
there is a load failure today.the load failure is due to the SID values missing for for one characteristic.
the requests in cube1,cube2 and in ODS1 are red.
but i the morning somebody made the red request in cube one in manage tab green and collapsed the same.
Actually i wanted to repeat the delta by deleting the requests in 2 cubes and ods.
But now the request in cube 1 is already collapsed what can i do now to get the last delta.
can anybody pls suggest.
urgent plsss....
Thanks in advance
S VR

Yes you are correct SVR,
We can not delete request once it is compressed. Selective deletion is not usefull in this case.
You can try following -- Be careful -- follow steps -- first try in Dev
If you know last requests generated todays delta in base/source ODS and those requests are available in PSA for reconstruction.... then...
1. Delete initialization from this source ODS to all 3 targets.
2. If requests are available for reconstruction, delete required requests from ODS.
3. Now initialize without data transfer from ODS to 3 targets(2cubes + 1ods).
4. Reconstruct deleted requests in Source ODS(it generated delta)
5. Pust delta to 3 targets.
Hope it helps
Srini

Reconstruct from Change log

Hi All,
I have a situation here where I have deleted a delta load request from ODS. Load is not through PSA.
I have reconstructed the request from Change log several times before but here in my case I am not able to find the change log request when I give my selections in "Multiple Selections" in Reconstruction tab.
The search parameters I have given are Infosource, Source system, Request Number, Req Id, and date. I have manipulated with these selections here but still not able to find the request in change log.
Could someone please help me here If Iam missing something?
Iam on BW 3.5
Thanks in advance.
Regards,
Srini
Message was edited by:
Srinivas

Hi Venkat,
Iam not able to see my request in the reconstruction tab.
Just now I realized that there were totally 4 requests that were activated with single CHange log ID and by mistake I deleted this delta as well while deleting the other requests.
Any chance of getting back this delta req from change log?
Regards,
Srini
Message was edited by:
Srinivas

Can we delete particular request from ODS

Hi All,
Can't we delete particular request from ODS?
there are dozen of successful requests in ODS, when i deleted one successful request from the middle, all the subsequent requests lost the tick which indicates they are updated to cube. Is there any way that i can undo this one?
can we do selective request(successful) deletion from ODS?
Thanks in advance.
Robyn.

Hi Samara,
what i was trying to do is re-arranging the requests according to chronological order, which are not in. imagine the scenario
ODS requests      cube request
5         ->             E
4         ->             D
2         ->             B
3         ->             C
1         ->              A
what iam trying to do is put them in sequence
ODS request        cube request
5                           E
4                           D
3                           C
2                           B
1                           A
If i delete 3rd ODS request put it over 2 it won't accept as the request number is lesser than that of 2nd request.
can we reconstruct any request from reconstruction tab or just the latest request?
How does this effect the data which is already updated to cube from ODS?
Regards,
Robyn.
Message was edited by:
        Robyn Hoggard
Message was edited by:
        Robyn Hoggard

Reconstruction of request in BI 7.0

Similar Messages

Maybe you are looking for