Record 1 :Error in a formula function (routine ROUTINE_0001 ), record 1

Hi ALL,
i ran the infopackge.load was failed.failed request is showing Record 1 :Error in a formula function (routine ROUTINE_0001 ), record 1 .why this error is coming.how can i solve this issue?
Thanks,
chandu

Hi Chandra,
Must be error in transfer rules. Conversion error in transfer routine or format error in file.If it is go to debugger and check.
Hope you have got the hint
thanks
udaykiran

Similar Messages

Record 869 :Error in a formula function (routine ROUTINE_0001 ), record 869

hi gurus please help me
this is the error occuring to me .when i am loading data from ods to cube please help me by details of this
how to edit in psa, when to edit, what is the next procedure

Hi,
Have you loaded the data you corrected from PSA to DSO? Is your corrected PSA data has loaded to DSO & your DSO is active & request is Green.
If so, then check if there is any formula or routine written in the transformation rule. Check if they are correct & your transformation is active. Then try executing the DTP.
Regards,
Pavan

Error in a formula function (routine 66 ), record 4,161 RSAR 535

Hi Experts,
I am facing this issue while loading form DSO to Cube. So i am using
Maximum Number of Errors per Pack more then 1000 to skip the error records.
In Error stack i get the below error :
Error in a formula function (routine 66 ), record 4,161 RSAR 535
Can any body help me on this.
Thanks in advance
Mohan.

i am doing datamart load ie DSO to cube
so while loading in DTP in update tab i have selected max no of error recods to be skipes = 9000 this will ignore the records if at all there are error records in the flow.
i know there are few records. but what i want is to identify wht the error in the record is
when i try to chk the records in Error stack if i selet a record to change with change mode i also get a pop up with the error msg
Re: Error in a formula function (routine 66 ), record 4,161 RSAR 535
Which i dont really under stand what and were the error is
i even compared the data of correct record which is alredy processed to the cube.
I could not find much difference
mohan.

Error in a formula function (routine ROUTINE_9998), record 0

Hi Experts,
i have an issue while loading from cube to ODS. The load fails with the following message:
Data records for package 1 selected in PSA - 1 error(s)
Record 0 :Error in a formula function (routine ROUTINE_9998 ), record 0
Please help me... Thanks in Advance!

Hi,
Prob, it could be passing invalid date to DATE_WEEKDAY!() function.
Regards,
-Vj
Edited by: Vijaya Bhaskar Bodanapu on Jan 16, 2009 3:24 PM
Edited by: Vijaya Bhaskar Bodanapu on Jan 16, 2009 3:25 PM

Error in a formula function (routine ROUTINE_0002 ), record 1

Dear Guru's
I am trying to load data into a ODS and i am facing the following problem in the PSA maintance it self.
*@5C@ Error in a formula function (routine ROUTINE_0002 ), record 1 RSAU 510 *
So any one please give me some suggestions........
Thanks in Adv,
Dev

Hi Srinivas dev,
Just check the key define for the ODS, and the Record for that line where it is giving error at PSA. I think there is no value for the Key maintain for the ODS.
Assign Points if helpful.
Regards,
Rajdeep Rane.

Error in a formula function (routine weekday) in BI system

Dear Experts,
I am loading statistical data to BI system. While loading the transaction data in to standard cube 0TCT_C01 from data source 0TCT_IS01 I could find an error saying that ´Error in a formula funtion ( routine weekday)`.
I have checked the transformations for that particular cube and found that there is a formula for an object called 0weekday1.
The formula is mentioned below:
DATE_WEEKDAY1( CALDAY )
I could not even identify what is the problem atleast. can any one help me in this regard?
Regards,
Remo

Hi,
Prob, it could be passing invalid date to DATE_WEEKDAY!() function.
Regards,
-Vj
Edited by: Vijaya Bhaskar Bodanapu on Jan 16, 2009 3:24 PM
Edited by: Vijaya Bhaskar Bodanapu on Jan 16, 2009 3:25 PM

Error in a formula function

Hi,
i ran the infopackge.load was failed.failed request is showing Record 1 :Error in a formula function (routine ROUTINE_0001 ), record 1 .why this error is coming.how can i solve this issue?
Thanks,
Ali

Hi,
As refered by the posts above , you need to edit the data in to PSA, now try going through the procedure below:
1. Once data is loaded till PSA , ther will be a "process Manually Tab" in the status of the ip, press that.
2. Now you will get the error in the processing packets .
3.make the IP red , delete the failed request from target( Info cube), sice for DSO there is a specific procedure.
4.now go bak to ip click on the psa tab, the error displays record '1', so select the first record in PSA, put the size of the record in the no. of error records and select " error record".
5. now you will se this error record in the PSA.
6. Click on the edit record , you will se the canonical structure of the record with its field.
7. No try editing th record for there might be a entry which seems to be diff from other(compare with correctly loaded records).
8. edit it , save the changes.
9. now either recostructing the PSA or manually pushing the failed request to target.
Hope this will serve your cause
Thax & Regards
Vaibhave Sharma

BW prod: 'error in a formula function'

We have problem RSAR 194 ('error in a formula function') in data load.
We use the following formula functions between IS and ODS (transfer/update rules):
FISCPER_CALMONTH( MONAT, FISCVAR, LEFT( 4, FISCPER ), 0 )
LEFT( 4, CALMONTH_FISCPER( CALMONTH, 'V3', 0 ) )
RIGHT( 3, CALMONTH_FISCPER( CALMONTH, 'V3', 0 ) )
DATE_FISCPER( ADD_TO_DATE( CONCATENATE( DATE_MONTH( SYST-DATUM ), '01' ), 1- ), 'V3' )
The problem occurs with data load from R/3 production, but just in the BW production environment:
in the BW development environment, the same data load process works properly.
(note that the development environment has been transported into the production environment without applying any changes,
so the production environment is the same as the development environment).
Both the develpment and the production environment have BW release 3.5 (on AIX/Oracle), with support package 14.
Related notes: notes 652706 and 690772 refer to the same problem but with BW relaeses 3.0-3.1;
note 798787 refer to the same problem also with BW 3.5 release but with support package prior to 11.
None ot them reports differences between development and production environments.
Does someone know how to solve this problem?
Thanks,
Massimo

Hi massimo,
'V3' is fiscvariant..?, check this is available in Production or not.
Check any dumps in st22. you will get some more info. and alos see the details tab in monitor.
Srini

How do you trace an error in a formula/function?

I have a very complex formula in one of my cells, and there is an error. The little help box that explains the error doesn't help me, as I still can't find the error? Is there any way to trace the error? I know that Excel has such a function, I was hoping Numbers had one too. It says "The operator '*' expects a number but found "." I have 12 products in my formula, and I can't find an error in the formula or in any cell. I searched the document for "." but it only found some in my comments. Thanks

Copy the formula and paste it here and we'll take a look at it.

Error in Formula Function

Dear Experts,
I tried to convert the fiscal period into calander month by using the following formula in transformation -
FISCPER_CALMONTH( RIGHT( 3, PERBL ), 'v3', GJAHR, 0 )
where PERBL is the Period block/year having the data like 2008004 & GJAHR is the fiscal year as I does not have posting period in data source or fiscal period, that is why i have to use the Period block/year.
I am getting the problem while uploading the data into the cube. It gives me an error Error in a formula function (routine 82 ), record 1
Please let me know how can i resolve this problem ??/
Thanks
neha

Thanks for the response
I test it in transformation.here it is giving an error message Error in rule test:
Now please tell me what to do the next?
Neha

Arithmetical errors or conversion errors found in routine ROUTINE_0001

Hi All,
Can you please let me know the solution for the below error which i found during loading Datasource
2LIS_11_VAKON for the ODS Order: Condition Data(0SD_O05) and Cube order : condition data(0sd_c15)
under :
Update rules ( 3323 -> 3323 ) : Errors occurred in
Data records for package 1 selected in PSA - 1 error(s)
Record 1 :Arithmetical errors or conversion errors found in routine ROUTINE_0001 record 1
Please provide solution for the above error?
Regards
Surya.
Edited by: sssurya on Sep 11, 2009 9:13 AM

Hi Surya,
Sorry for the late reply.
In your requirement there might be an condition when Billing Qty may come 0.In such a cases it becomes infinate value.
In Formula put an condition like.
IF( IS_INITIAL( Billing Qty ),0, Condition value / Billing Qty ).
If its routine.
If Billing Qty <> 0.
Condition Price = Condition value/Billing Qty.
endif.
Regards,
shivu.
Edited by: Shivu Kumar on Sep 16, 2009 9:22 AM

Arithmetical errors or conversion errors found in routine ROUTINE_0001 reco

Dear Friends,
I am trying to extract data for DataSource 2lis_13_vdkon
into ODS 0SD_O06 I am getting error.
i.e. Arithmetical errors or conversion errors found in routine ROUTINE_0001 record 1
please guide me.
Thanks in Advance.
Regards
Rafee Ahmed

1)Check your routines update rules, transfer rules..etc if there are any calculations done ..and it is resulting in any error like divide by zero..etc
2)Check if there are any conversion routine checked/unchecked at the transfer structure level..
Regards
Manga

No address record error during installation

Definitely new to linux
I'm following the beginners' guide. I've got to the point in which I Select Packages and get the error:
Packman preparation failed!
Check /dev/tty7 for errors
When I check /dev/tty7 I see:
Using mirror: ftp://mirrors2.kernel.org/archlinux/$repo/os/x86_64
[LOG] 2011-05-12 13:19:08 *** Executing worker runtime_packages
[LOG] 2011-05-12 13:19:08 *** Executing worker package_list
: : Synchronizing package databases...
error: failed retrieving file 'core.db.tar.gz' from mirrors2.kernel.org : No address record
error : failed to update core (No address record)
error : failed synchronizing any databases
So I've been searching the forum for the last couple of hours. I've pinged google and the mirror successfully several times so I think my network settings are all gravy. What I see is that the mirror address has been changed from what I typed in. I typed: "http://mirrors2.kernel.org/archlinux/core/os/x86_64" and when it runs "core" is changed to "$repo"
This is the only thing I can find, and I have no idea how to keep this from happening. Any help would be very much appreciated!

lilsirecho wrote:
Perhaps there is a missing element in the mirror selection.
Thus: from /etc/pacman.d:
Server = ftp://locke.suu.edu/linux/dist/archlinux/$repo/os/$arch
#Server = ftp://lug.mtu.edu/archlinux/ftpfull/$repo/os/$arch
The install procedure for dual .iso provides a long list of mirrors and locke is near the bottom.
I installed recently using the above FTP install with no difficulty.
The mirror you used worked just great for me! It's also convenient because suu isn't very far from me at all.
I'm now not really sure what was wrong earlier. It looks like it's just the mirror I chose, though I restarted the installation since posting and may have done something differently when setting up the network.
Thanks though! I can't wait to see what arch is all about!

Canon HF G10 Camcorder - "Cannot Record" error message when trying to make new recordings

Hi All,
I purchased Canon HF G10 camcorder 6 months ago and suddenly I am getting a "Cannot Record" error message each time I press the record button - it simply stopped working and I am puzzled about this - has anyone else faced this problem? if yes, were you able to resolve it? Any insights or torubleshooting guidance will be greatly appreciated.
Best regards,
Rajiv Arora.

ra33,
I am very glad to help you with this.
According to the specifications in the user manual, this model records to the internal memory by default in any shooting mode. You can manually select to record to the SD cards, but only in the Manual or Cinema modes. If you are shooting in Auto, clearing out some of the internal memory should stop the "Cannot Record" message from appearing.
If there is anything else I can help you with, please let me know.
This didn't answer your question or issue? Find more help at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Error in formula function (ROUTINE_18) record 1

Hi All,
We are loading a flat file in to a DSO. From here we are loading the data from DSO to a cube (using this DSO as a Export datasource). In the export datasource infopackage, we are giving date in the selection screen and loading the data. before it is working fine. Now when we try to load the data, i am facing the error " Error in formula function (ROUTINE_18) record 1" and the data was not moving from the PSA to the infocube.
Recently we have upgraded the BI system from 7.0 version to 7.3.
Please let me know the reasong for the failure and how to correct it.
I have replicated the Export datasource and even i re-generated the DSO as export datasource but no use and getting the same error.
Thanks,
jack

Ok...you have a BW 3.5 flow.
As you said you have selection at InfoPackage level. Please check whether the InfoPackage without selection works or not.
If it works then you have the problem in Selection field.
Also check if there is any problem in Update Rule /Transfer rule
If you have selection routine written at InfoPackage level, create a new InfoPackage ( Full) and load .
Anindya
Edited by: Anindya Bose on Nov 3, 2011 11:01 AM

Record 1 :Error in a formula function (routine ROUTINE_0001 ), record 1

Similar Messages

Maybe you are looking for