Record 1 :Time conversion from 0CALDAY to 0FISCPER (fiscal year A1 ) failed

Get red error when loading Delta data and the red error is:
Record 1 :Time conversion from 0CALDAY to 0FISCPER (fiscal year A1 ) failed with value 20060426
We went to RSA1 -> Source Systems page, right click on the source system, choose Transfer Global Settings, check "Fiscal year variants" and check "Rebuild tables" and then run it twice, but still not helpful that we always get the above red error!
Any idea?
Thanks

hi Anurag,
You are right that run OB29 on BW, find there is no any period entry for variant A1. Since all the variant should come from R3 by run "Global Transfer Settings" on the source system, I run OB29 on R3 and find the same thing that there is no any period entry for fiscal year variant A1. I will go ahead to ask R3 people to correct it on R3, then conduct the "Global Transfer Settings".
Thanks

Similar Messages

Ime Conversion from 0CALDAY to 0FISCPER (fiscal year) filled with value2008

hi All,
data load was failed.failed request is showing.Time Conversion from 0CALDAY to 0FISCPER (fiscal year) filled with value20080226.why this error is coming freqentely.i want to the reason.please help me?
Thanks,
chandu

Hi,
Pls Look for the erroneous records in PSA.
Compare the error records with the correct one's.
This is due to the difference in the date format..
Follow the format in the correct records.
For the time being you can edit these records in the PSA to the correct format and continue with the load,and later you will hav to make the changes in the source system.

Time conversion from 0CALDAY to 0FISCPER (fiscal y

This is the error i'm loading.Please any one solve this.

Hi,
you cannot directly derive the fiscper from calday. You need create a routine and call a function for this. The function has to be called with calday and a fiscal year variant in order to derive fiscper.
One example for a fm is FISCPER_FROM_CALMONTH_CALC, another one DATE_TO_PERIOD_CONVERT....
kind regards
Siggi
Message was edited by:
Siegfried Szameitat

Error while loading : Time conversion from 0CALDAY to 0FISCPER

Hi ,
I get the following error when loading to an ODs .
My 0FISCPER is mapped to one of the date fields from the extractor (Document date) and also Have 0FISCVARNT as part of data fields .
" Time conversion from 0CALDAY to 0FISCPER (fiscal year ) failed with value 20060405 " .
thanks .

Hello CG
Please refere this forum
Time conversion problem
Thanks
Chandran

Error 3 in Update(The Conversion from 0CALDAY to 0FISCPER failed)

Hi Guyz....
Seriously struck with this issue while loading data into 0PP_C02 using the D.S- 2LIS_04_P_MATNR. I've been getting the error "Time Conversion from 0CALDAY to 0FISCPER (Fiscal Year) Failed... and at update rule I've been getting the error "Error 3 in Update"
I've searched almost all the posts- alas, all are unanswered.
Can anyone please provide me the right soultion...?
Thanks,
Regards,
G!

Hi Gautam,
For converting calday to fiscal period, you need to have fiscal variant and also entries in Table T009B for this fiscal variant.
1) Check whether you have company code populated for all records.
2) Please check whether you have fiscal variant maintained in the company code master data.
3) Check whether you have T009B table maintained.
If not this can be transferred in source system -> Global settings.
Hope this helps.
Thanks,
Krishnan

Time conversion from u0085.Any help on this error in the PSA?

Hi,
In IDES, I chose a random infosource to test init and delta loads; in the process I created an infopackage for the load. During the load, Monitor displayed showed failure (Red); The details of the message in PSA is:
Time conversion from 0Calday to 0FISCPER (discal year) failed with value 19911021
Any guide on how to fix this problem?
Thanks

hi Amanda,
0fiscper has compound infoobject 0fiscvarnt (you can check RSD1 tab 'compound').
when uploading data, conversion will failed if 0fiscvarnt is blank/initial or the date format/value is incorret, your date from 0calday seems correct so 0fiscvarnt blank
seems it's your case, try to check in your transfer rules and mapped 0fiscvarnt infoobject, you can fill it with constant value, choose option 'constant' and fill with K4, you can only fill with values that exist in table T009T.
you can transfer these values from r/3 via rsa1->source system->transfer global settings, mark 'fiscal year' something and option 'update table' and execute.
hope this helps.

Can we only year value from "0FISCPER" (Fiscal Year/Period) at BEx level

Hi all,
I have two time characteristics "0FISCYEAR" (Fiscal Year) and "0FISCPER" (Fiscal Year/Period). In DSO initially "0FISCPER" was there and later request came to add "0FISCYEAR". Now data in char. "0FISCPER" is since beginning (from 2000) and for char. "0FISCYEAR" is since 2010.
User's requirement is to create a report which will display data Year wise.
My issue is if i am using "0FISCYEAR" then user is not able to see year instead it shows #. I dont want to do data reloading as this is GL data and hold huge no. of records in it.
So my concern is : Is there any way to use only year value from "0FISCPER" (Fiscal Year/Period) at BEx level? Is there any setting which I can apply and get the same value of Year as I can see from "0FISCYEAR". Please assist me on this.
Thanks,
Arvind

Hi Arvind,
Your requirement can be realised through virtual characteristics.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b04be008-86cc-2c10-4bad-e517ea3f4c80?QuickLink=index&…
however, I would still suggest to reload the data. you will only need to reload years before 2010 and you can do this in phases.
Hope this helps.
-Swati.

Date/time conversion from UTC to CET

Hello,
Jjust a little question to our SAP BI community!
Is there a BI function/ggod way that converts a (datetime) string DDMMYYYYHH:MM:SS in UTC time zone into a string DDMMYYYYHH:MM:SS in CET timezone ?
We receive this string in input in a flat file and need it to convert from UTC to CET.
Or do you know any way to convert a date/time from IUTC to CET, eveen using an ABAP function?
Thanks a lot,
Matthieu

Hi,
Check this thread for time conversion from UTC to Local time
[ABAP statement for converting UTC date/ time to local date/time],
Regards,
Daya Sagar

Time Conversion from Local to UTC Help! - Daylight Savings Problem?

Hi,
I am trying to use the generic conversion of local time to UTC time. I thought I had everything working since I use the "Get Date/Time in Seconds" and then convert to "Seconds to Date/Time" witht the "to UTC" flag set true. Then I convert back to a timestamp.
I thought I had everything working until I hit Daylight Savings for the Pacific Standard Time. Now the Labview is off by 1 hour!
Is there an update to the Subvi's that do this? Is this a known error? Please help. Thank you!
Attachments:
test25_LocalToUTC_Time.vi ‏8 KB

Here is the path you are doing that is causing the logic to fall apart for you.
1. You are getting the current time. In your images, it is 12:41 pm PDT which is 7:41 pm GMT
2. You are asking for the date/time record (that cluster that breaks out everything) but are saying it is UTC, so you get a date/time record that 19:41 UTC (7:41 pm). And the DST flag is 0. (Because UTC doesn't observe daylight savings time.)
3. Now you are taking that date/time record and converting back to an actual date/time. You don't wire up the UTC flag so it defaults to false. Thus the date/time record is interpreted as local. That DST flag is still 0 in your cluster. So you are actually converting the time to 7:41 pm PST, which is actually 8:41 PDT. (+1 hour for spring forward based on the month/date info.)
4. You are displaying that time stamp in the indicator labelled "Current Date/Time (UTC)", but it is not truly UTC, it is actually the conversion of a local time from PST to PDT, and it is not even the current local time. It is actually a "local" time 8 hours into the future. If you put the carat into that indicator's display format, you'll see that the UTC time is in the future as well. You call it UTC, but you are displaying a future local time.
The inconsistent conversions from local to UTC, and not accounting for the change of the DST flag from daylight time to UTC are what is confusing you. You kind of get lucky during standard time because the DST flag is 0 for both local standard time and UTC. But the conversions are still wrong, but it is a case of two wrongs are making it look right. Even in standard time your input timestamp and your output timestamp indicator don't match which you would see if you used an Equals? function on them.

Variable for budget from starting to previous fiscal year?

Hi experts,
The requirement i got in my report to calculate Budget upto previous fiscal year.
For ex: If my project starts on Nov 2004 , then i want to calculate for the year Nov 2004 to Mar 2008.
I tried for variable Cumulate to last fiscal yeard

Hi,
Here I'm giving the code to get Months based on System date, so you change this code to as per your requirement.And if any use input variable is there then you need to use ....
LOOP AT i_t_var_range INTO loc_var_range WHERE vnam = 'ZVARAIBLE'.
ENDLOOP.
Note: So by using this variables you need to restrict your Keyfigures with offset values.
* First Month Of Current Fiscal year comment*
    WHEN 'FMYEAR'.
      CALL FUNCTION 'DATE_TO_PERIOD_CONVERT'
             EXPORTING
               i_date               = sy-datum
*         I_MONMIT             = 00
               i_periv              = 'V3'
            IMPORTING
              e_buper              = zbuper
              e_gjahr              = zbdatj.
      CLEAR: l_s_range.
      l_s_range-low+4(2) = '04'.
      l_s_range-low+0(4) = zbdatj.
      l_s_range-sign = 'I'.
      l_s_range-opt = 'EQ'.
      APPEND l_s_range TO e_t_range.
* Last Month of Current Fiscal year*
    WHEN 'LMYEAR'.
      CALL FUNCTION 'DATE_TO_PERIOD_CONVERT'
             EXPORTING
               i_date               = sy-datum
*         I_MONMIT             = 00
               i_periv              = 'V3'
            IMPORTING
              e_buper              = zbuper
              e_gjahr              = zbdatj.
      CLEAR: l_s_range.
      l_s_range-low+4(2) = '03'.
      l_s_range-low+0(4) = zbdatj + 1.
      l_s_range-sign = 'I'.
      l_s_range-opt = 'EQ'.
      APPEND l_s_range TO e_t_range.
Thanks
Reddy

Time conversion from IST to GMT

i want a java code for converting time of imagecaptured by camera from IST to GMT

Please don't ask the same question in different forms in multiple threads. I shall lock this thread.

Recording time shift from a continuous signal

Hello
I am just starting learning LabVIEW and have to complete this vi.
I need to output the data from continuous time shift, but I don't know what to do to translate it to acceptable one.
The attachment 1 is the vi.
The attachment 2 shows where the problem is.
Thanks
LPH
Message Edited by Support on 04-21-2009 08:20 AM
Solved!
Go to Solution.
Attachments:
untitled.JPG ‏113 KB

Sorry I don't understand "....fix this error, you HAVE to replace your local variables with wires......",
Look at your diagram.
You have one of the Tektronix VIs outputting a value called DELTA T.
A couple of places you use the DELTA T control (local variables) as an INPUT.
Which one do you think will execute first, and why?
The answer is, you don't know.
Since you didn't connect with wires, LabVIEW thinks you don't care about the order of things. It might do the READ of local variables BEFORE doing the WRITE.
Even if it does them in the order you want the first time, it might just do it differently the next time. It's allowed.
To avoid that uncertainty, run a wire from DELTA T coming out of FETCH WAVEFORM directly to where you want to use it. Delete the local variables.
Steve Bird
Culverson Software - Elegant software that is a pleasure to use.
Culverson.com
Blog for (mostly LabVIEW) programmers: Tips And Tricks

"system date deviates from all company's fiscal year" message

Hello experts,
Whenever I login to SBO Client, the system shows a message (pic attached). Could you please help me how can I fix it?
Regards,

Hi Matt,
Please create Posting Period on below Path.
Administration >> System Initialization >> Posting Period >> New Period
By creating Posting Period, above error will dis appear and you can do Transactions in System.
Hope this help
Regards::::
Atul Chakraborty

Error while loading data into cube 0calday to 0fiscper (2lis_13_vdcon)

Hi all,
I m getting following error while loading the data into cube.
"Time conversion from 0CALDAY to 0FISCPER (fiscal year V3 ) failed with value 10081031"
amit shetye

Hi Amit,
This conversion problem. Calender not maintained for Fiscal variant "V3", for Year: 1008.
Maintain calender for year: 1008 and transfer global setting from soruce(R/3).
RSA1--> Source systems --> from context menu --> transfer global settings > choose fiscal year variants and calender> execute
Hope it Helps
Srini

I am getting error with Fiscal Year Period

Hi Gurus
When i am loading data into Data Target from ODS i am getting this error
Time conversion from 0CALDAY to 0FISCPER (fiscal year Z1 ) failed with value 02000801
Can u please help me to solve this issue
Thanks & Regards
Mahi

There is somthing wrong in 0calday value (02000801); it should be 20000801 fro first of augost 2000.
Che data in your ODS.
Hope it helps.
Regards

Record 1 :Time conversion from 0CALDAY to 0FISCPER (fiscal year A1 ) failed

Similar Messages

Maybe you are looking for