Record 2 way video conference

Is it possible to record 2 way conference in a single file? I can record conference separately for both perticipents but can not record as a single recording file. Kindly help me if anyone has done yet.
Thanks,

You can't record two streams to a single file with FMS. You'll need to record to separate files and develop your own timecode scheme to sync them on playback.

Similar Messages

  • Three-way video conference MAC with AIM

    Are you able to do a three-way video conference with 2 users with AIM accounts with one who has MAC accounts?
    The person with the MAC account shows up not stacked to indicate multi-video conference.
    Just Wondering

    Hi DB in NB,
    It depends on...
    Are they all using iChat 3
    Do they have an Internet connection in excess of 384kbps both up and down ?
    (there are some variants if the download is quicker that will allow you to have 256K up)
    Do they have a Mac over a G4/1Ghz single processor
    Is the one to be the Host a G4/1Gz Dual or greater ?
    If they all fill this criteria and one does not show stacked icons then it needs some maintenance.
    They should make sure the System Preferences > Quicktime > Streaming tab is set to 1.5Mbps
    They should run the Cron scripts if they are not sure
    See here http://discussions.apple.com/thread.jspa?threadID=122021
    9:14 PM Tuesday; February 6, 2007

  • Ichat 4 way video conference

    guys hope you can help.
    I am a Mac newbie and have been dropped from a great height into Ichat video conferencing.
    My company have bought 5 24" imacs for VC and a mini mac running ichat server.The company who installed can't seem to help. they told me that all th audio\video data goes through the mac server. I have disproved this by having two of the imacs log on and VC I then disconnected the mac server and the 2 imacs continued to VC.
    so my question is how does the audio\video data move?
    say in a three way chat mac1 initiates conf with mac2 and mac3, does mac1 host all data or do mac2 and mac3 pass their audio\video data between themselves?
    I hope this makes sens i need to know how video\audio is moved to set QOS accross our WAN VPN.
    "Panarama rule"
    thanks

    Thanks for the reply Rocky.
    so the bottle neck when it comes to bandwidh will be the initiating mac. we have 2mb lease lines with QOS of 1mb for video conferencing will this be enough?
    we bought this solution from and Apple dealer who said we would get excellent quality with a 4 way video conference session.
    what sort of kbps do you need for a reliable consistaint session?
    we are crossing subnets so bonjour wont work i believe.
    im sorry I have so many question but i cant find a definitive answer from apple or our supplier (they Dont know)

  • 3 way video conference from mac to pc

    I have a Power Mac G5, and have recently started video conferencing with my friend, who happens to be a PC user. We have both been video conferencing through Skype, and it works great... but is it possible to add a 3rd person to our video conference (another pc user)? Any suggestions would be much appreciated! Thank you!

    Can not be done in iChat.
    11:05 PM Wednesday; January 24, 2007

  • AIM(PC) doesn't see the video in a one-way video conference from me iChat

    I'm using an iMac running iChat v 3.1.5. The other end is using a PC running AIM v 5.5, with the ports opened on the windows firewall, but she cannot see the video coming from me. We both get audio, just no video for her. She gets a black screen. How do we fix this?

    Hi TonyBar3,
    Even though she has not got a camera has she tuned the app for A/V chats
    6:53 PM Tuesday; June 20, 2006

  • One-way video for conference call?!

    My place of work is looking for a way to have a one-way video conference call. So one person (administrator) would be seen by all on the conference call. (No need to see othe participants). If this is possible, how many people can be on the conference call? 25?
    If it's not possible, anyone no of any web conferencing programs that have something with this capability?
    Many thanks.

    You should be able to call them normally (p2p or group) then enable your webcam for them to see you.  If the people you are calling are incapable of viewing a video stream due to their computer's processor (non SSE2 or non-video capable mobile processor) or because they have an older Skype client, then video could be disabled for the group call.  Not having a webcam would not be the main issue.  Also if you are standard phone calling them in the group there would be no way for them to see you either.

  • One-way video chat to 10.2.8 from Tiger G4?

    Ok, 1000 pardons if this has been answered somewhere...
    I am trying to video chat (one way) from one computer, an ibook G4 with 10.4.2, ichat 3.0.1, to another, a powerbook G3 400 mhz with both 10.2.8 and 10.3, both with ichat AV 2.1 ... We have been able to audio chat, send files, etc., without problem.
    My question: Is it also impossible just to RECEIVE video on a "sub-standard" computer? We didn't hook a camera up to the G3, because ichat says it is too slow to video conference.
    When I invite my wife to a one-way video conference, it simply says to her, "your computer is unable to video-conference." It says this no matter whether it is booted in 10.2.8 or 10.3.
    I haven't been able to find anything specifically addressing one-way video between ichat 3.0 and 2.1, or whether at least that is possible with slower computers. I haven't read anything saying that this is specifically NOT possible. I have read that there are (apparently) many problems in general between 2.1 and 3.0, but any specific info on how I can accomplish this would be helpful.
    Cheers,
    bruce

    Hi Bruce,
    The link http://docs.info.apple.com/article.html?artnum=301050 says any G3 can Audio chat 1-1 not Vifeo.
    A G3/600 is needed to video.
    This http://www.ecamm.com/mac/ichatusbcam/ is norammly needed for the use of USB cams or an iSight on sub G3/600 machines to Video (as low as 350Mghz)
    I have no information if it helps with one way chats with or without a camera and Mic. However as it comes with a 7 day trial it might be worth giving it a go.
    Ralph

  • One isight, two macs with ichatAV.  Why no one way video?

    Hi everyone,
    I'm kinda surprised this has never been discussed before, I looked pretty hard, but I could be wrong.
    Here's my question, is it possible to have only one person with a webcam (iSight in this case) and still have a one way video conference? Specifically, my dad has an iMac G4 with Tiger and an iSight attached. I have a powerbook G4 with Tiger and rarely have the ability to have an iSight attached because of mobility and all. Is there a way to see my dad when I start an ichat with him without having my camera attached? Is there a work around? If not, then I gotta ask the obvious question, WHY? It seems pretty feasible. One person has a camera the other doesn't and one person would like to see the other in an ichat.
    Any help or workarounds would be greatly appreciated.
    Thanks!

    Your dad might have to disconnect and reconnect in order to see the one-way video chat option under the Buddies menu. This happened to me the other day when I tried using iChat/iSight for the first time. I have an iSight and my parents don't. Until I tried disconnecting/reconnecting the only option in the Buddies menu was for a standard two-way video chat.
    Steve

  • 2-way video, CPU Useage

    I have a 1.5ghz PowerBook G4 with 1.25GB of ram, and since upgrading to tiger have found that while in a 2 way video conference, running only iChat, my CPU useage pegs to 100% iChat uses around 75% of my CPU and the other 25% is taken up by system.
    iChat processes running:
    iChat
    iChatAgent
    vcencoder
    This was never a problem under Panther, I was able to video and surf Safari, or iTunes, now it is impossible to even search my iTunes library while in a video chat.
    Has anyone else had this problem? could it be some kind of memory leak or bug in iChat? or just H.264 telling me that the G4 is extingct?
    I have tried restarting as well as lowering bandwidth limits. Any suggestions?

    I am not using any add on's listed, i am using iGlasses, which is optimized for Tiger but nwo that you bring it up, i may try removing that and seeing if it helps. My modem is an AlcTel 1000, with a Netgear router with an assigned IP network and DMZ at my computer. It then runs to a linksys hub and then to my airport express, I have however connected straight from my modem, and it does not seem to be a performance issue so I don't think that should be a factor. thanks for the help i'll give it a try later.

  • Multiple iChat Video Conference Windows?

    Just like many people I am getting ready to participate in my fantasy football draft and we have a few people that will need to be at the draft remotely. We are planning on using iChat to video conference with the people who have intel based iMacs running Leopard.
    Is there a way to have multiple one-on-one iChat video conferences open at the same time instead of a 3-way conference all together? Meaning I want to be able to have an open one-on-one connection with one person but have another one-on-one video connection separately so I can mute one video connection but not the other.
    I guess a different question would be can you have one 3-way video conference but only mute your conversation to one of the participants but not the other?
    Thanks for you assistance!

    No cant be done.

  • Multi-person video conference iChat to AIM 5.9 on PC

    Is there a way to have multi person video conference involving a buddy that's using AIM 5.9 on a PC?
    If I'm on a video chat with another iChat buddy and try to invite a AIM-on-PC buddy, it simply doesn't work. If I'm on a video chat with the AIM-on-PC buddy, the plus sign is grayed out. I can otherwise easily support a four-way video conference, so long it involves only iChats...

    You cannot do multiperson video conferencing involving both iChat and AIM PC users. I think that is what the first responder meant to say.
    You can use SightSpeed to do multiperson video conferencing among both Mac and PC users. There are both PC and Mac versions of SightSpeed, and it is necessary that all users be running SightSpeed software and not iChat or AIM for PCs.
    Also, the person hosting the SightSpeed multiperson conference must have the $4.95 per month paid version of SightSpeed. If you are interested, you can find more information at:
    <http://www.sightspeed.com>

  • Can I do a 3 way video chat with two iMac users and 1 PC user?

    Hi,
    I'm due to have a video conference in a few days and I suddenly realized that one of us has a PC and two of us have iMacs. If the PC user were to get AIM, would it be possible for her to communicate with the two of us and can the two of us communicate with and see her? We live in 3 separate areas so we will be using three separate computers. If it is possible to do this, what do we all need to do? Also, I have iChat 5.0 and the other iMac user has whatever came with Tiger. I have done three way video conferences before without a problem but we've all had iChat. Thanks in advance.
    Judy

    Hi
    Wont work with a PC in a 3 way in iChat.
    Have a look at TokBox http://www.tokbox.com/view/about
    And browser based MeBeam http://www.mebeam.com/

  • Invite to one-way video chat not an option ...

    Hi,
    I have a new powerbook running Tiger fully updated, and my friend has a new iBook on Tiger, fully updated also. I have an iSight which connects and shows up fine, but when I try to invite my friend to a one-way video conference through the Buddy menu it's not an option at all.
    We can audio chat perfectly, is there anything I should be doing differently?
    thanks
    John

    Hi Ralph,
    Yeh checked all that and it's fine, on my friend's computer there is no "video" in the toolbar but on my camera is enabled and the preview is working fine. It still doesn't offer one way video as an option for any buddies ... Goggle throws up a case where there is happening someone else, with no answer unfortunately.
    It is really weird, we are having an audio chat fine, but the Buddy menu for my friend's name only offers invite to chat ( which brings up an AIM dialogue ), Invite to Audio Chat and Invite to Video Chat are both greyed out, even though we are talking fine!
    No other buddies online and I definitely have the right name selected, Get Info on that buddy menu gets me their details. It's weird!
    any ideas much appreciated, sounds buggy
    John

  • Recording a video conference

    Hi all, I need to record a video conference and cannot find any help on this. Is this possible using the pre-installed apps (like video chat) or is there an another app that does this. Alternatively is there a secure web based application that can record a video conference. Thanks in advance for your help

    The Camera app does this. Just run it and tap on the icon at upper right, which switches between still image and video mode.
    Peter Hansen -- (BB10 and dev-related blog posts at http://peterhansen.ca.)
    Author of White Noise and Battery Guru for BB10 and for PlayBook | Get more from your battery!

  • How do i host one way multiperson video conference?

    My friend was able to host a video conference with me and him on video, and another person through audio; this was on his g4. I am on a 2.33 ghz Macbook Pro, and I want to host a video conference with two people on audio. Is that possible? I've tried a slew of combinations, but to no avail. Any suggestions? Is it feasable? Thanks.

    I think that it was an extremely lucky strike to realise 2way video in combination with a friend who had a mic (audio only) next to his pict. What might have happened that it actually was a 3way video chat and due to bandwidth drop turned out to effectively be a 2AV one only Audio.
    So, if you have a multi layered camera in your list, you can video chat with more than one other camera user, and you audio chat with other multi layered mics up to 10 users. But you can't do mixed invitations between them.
    How does iChat determine if you are capable of joining or hosting a multiperson chat?
    When iChat is opened, it performs a series of tests to determine if multi-person chats are supported with available bandwidth.
    iChat also checks the file "com.apple.ichat.plist" in ~/Library/Preferences/ to detemine if defaut values have been set for bwdup and bwddown. It checks to see if the IP address stored in bwdid is the same as the current IP address of the computer, or if the settings are older than three days.
    If any of these conditions are not met, iChat performs a .Mac bandwidth detection test to see if .Mac network bandwidth is fast enough to support a multi-way connection.
    If the test succeeds, then multi-way chat is enabled.
    JP

Maybe you are looking for

  • Help!  Reset the password and now master account at log in is missing??????

    I really need you help on this. Today I was helping my younger cousin with his macbook. He lost his password so I put in the disk that came with it and held down C and went to Utilities/reset password and reset the main account password. I might have

  • Mapping Programs

    Hi Expets, We know that there are different mapping programs are available in XI environment like Graphical Mapping, Java Mapping, ABAP Mapping and XSLT Mapping. But on what basis we will choose one of these mapping programs? I mean, which constraint

  • Setting the Substitution Value for a Link Attribue in an Interactive Report

    another thing driving me NUTS in apes. I set the URL of the Link column to javascript:void(#METRIC_NAME#);I set the Link Attribute to: onclick="#METRIC_NAME#"and I get... a href="javascript:void(BACKUP);" onclick="#METRIC_NAME#"><img src="wwv_flow_fi

  • How to change color of a report/form

    Hi, I am new to APEX. I have created an interactive report and using Theme-9 Simple Gray. I want to change background color of this report and form. May you please giude me. Thanks in advance.

  • Extract in abended

    HI ! I have add extract in (sqlserver2005 standard sp3 11.2.1.0.2 ogg) trying to replicate to oracle 11g xe. ADD EXTRACT finance, TRANLOG, BEGIN NOW EXTRACT ttext SOURCEDB osdfsdfdsf,USERID sdfsdfsd, PASSWORD sdfsdfsdf & AES128, ENCRYPTKEY securekey1