Record a selected Video, Audio and Subtitle track in low res for proof.

I am moving my DVD Authoring from Spruce Maestro to DVD Studio Pro.
The DVDs I create have 25 languages on them that need to be proofed by 25 different people all over the world. In the Spruce system I could just manually record the output with whatever video, audio and subtitle track that needed to be proofed in a WMV file format and then email the proof version before final burn.
Now in DVD Studio Pro and can not seem to get an analog output to do a manual record. I have purchased an additional video card for my Mac Pro that has S-Video and that does not work. I have the DVI to S-Video converter cable but I can not select that output when it is active. I have tried the export function but that only changes the m2v file into a mpg file, so that does not work.
Do you have any other suggestions - this is very important for my operation.
Thank you, Ron Cole 209-604-5415

very interesting. I do a lot with translation, though my maximum has been 16 languages on a single disc.
There are a couple things you could do.
1) One is just to do a screen capture using something like Screenflow to capture and process the single streams you want to output.
2) I think the first approach is a little arduous. Better would be to use the power of Final Cut even before you get to DVD SP. Unfortunately I don't know your entire workflow. But subtitles can now be done in Final Cut and then carry forward into DVD SP. I'd lay out my edit and soundtrack and subtitles in FCP, and then export a file of my choice and size and have it automatically uploaded. This could be done right out of FCP or by creating a batch in Compressor. Changes, as they came back, would be applied in FCP. Once you had final approval (golden words), I'd move into Compressor to create M2v and ac3 files.
My projects are done with similar workflows. I then have to ship off translated graphics for the DVD menus. That can be dealt with at the end in a finalized disc or preferably sending off stills for an early approval.
Make sense?

Similar Messages

Recording audio and software tracks simultaneously ?

recording audio and software tracks simultaneously ?
I am recording a software piano instrument track and a vocal audio track in logic Pro X. Problem#1
When the replace"X" button is selected,
when recording audio and a software track simultaneously,
I can hear the previously recorded instrument track that I am recording over.
(very distracting)
When recording a software instrument track alone (without simultaneously recording an audio track)
The software/midi instrument track will record over and erase existing data and I will not hear the previously recorded track. (as it is suppose to do) Problem #2
Both tracks are armed ready to record.
If the software instrument track is not highlighted, it will not record.
The audio track will record regardless of whether it is highlighted or not. Craig C.
Calistro Music

Click record on the MIDI/Inst track.
Shift click record on the audio track.
Hit record

When I import a video recorded in Quicktime, the audio and video don't sync. Any solution?

When I import a video recorded in Quicktime, the audio and video don't sync. Any solution?

Where did the media file come from?
Does it use a variable frame rate?
What version of Premiere are you using?
Variable frame rate video problems:
http://forums.adobe.com/message/4897424#4897424
http://forums.adobe.com/message/4071506#4071506

Switching audio and subtitles.HELP!!

How do I configure this in the DSP? What I want is switch the audio and subtitle while I am watching the video...without having to return to the settings menu to change language audio and subtitles.
this track has one video track and four audio tracks and four subtitle tracks
(Italian, English, Japanese and Spanish)
apparently I set everything up, but I dont know if I forgot something ...
I Hope you understand my doubt.
HELP

The part that duplicated earlier replies from others.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Kevin Zawicki" <[email protected]> wrote
in message
news:gisqd3$e79$[email protected]..
> which part?
>
> "Murray *ACE*" <[email protected]>
wrote in message
> news:giqmdd$rar$[email protected]..
>> Oops - ignore my post.
>>
>> --
>> Murray --- ICQ 71997575
>> Adobe Community Expert
>> (If you *MUST* email me, don't LAUGH when you do
so!)
>> ==================
>>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>> ==================
>>
>>
>> "Kevin Zawicki"
<[email protected]> wrote in message
>> news:giqfdt$jb7$[email protected]..
>>>I am changing PCs, Windows 2000 to Windows XP.
>>>
>>> Dreamweaver version MX2004.
>>>
>>> Installed to XP no issues.
>>>
>>>
>>>
>>> Copy local website files to folder, mapped drive
to folder as W:. Same
>>> as previous PC.
>>>
>>> IIS is running.
>>>
>>> Manage site, setup site, can see file, edit
file, etc.
>>>
>>>
>>>
>>> When previewing site pages (F12) got file not
found type errors.
>>>
>>>
>>>
>>> It seems you can only have one website in IIS in
XP? I did not use
>>> default website on old PC, did not want to do
that, but changed to the
>>> default, I can preview, but VBscripts and other
scripts do not run....
>>>
>>>
>>>
>>> Is there a step by step guide to setting up the
preview server, which is
>>> on my local PC?
>>>
>>>
>>
>
>

How do I bounce audio and midi tracks at the same time to burn a CD?

Hi there,
I would like to bounce a song with both audio and midi tracks recorded in it onto a CD.
Despite ensuring that I am doing a realtime bounce (not offline) I am only getting the audio tracks burnt onto the CD - the midi isn't getting bounced to the final output.
This must be a stupid question, if someone would be so kind as to give me an obvious answer I would be most grateful.
Thankin y'all
amata

Hi A,
if you use the instrument (with logic virtual synths) tracks for midi,
it will.
BTW, why don't you do it offline?
It will be so much faster.
Kindly regards,
Jorge

Is it possible to mute video audio and play music?

I am trying to put together a video and would like to at one point in the video mute the video audio and play a bit of music during the video and then after that section un mute the video audio and mute the music.
Can this be done in iMovie 09 and if so how?
Thanks

If you're Airplaying from you computer, you might be able to do this. Here's what I would try:
Go to the Airplay icon in iTunes. You should see both your Apple TV and your speakers listed as options. Select "Multiple speakers." You'll see both devices together. Turn the volume all the way down on the Apple TV. You should be getting the video on the TV, but only hear audio through the speakers.
Using the "Multiple Speakers" option will sync the output of your devices so that the sound matches the picture.
I haven't tried this myself, but I'm thinking this would work. However, this approach will only work when using Airplay from your computer – not from am iPad or iPhone – as they don’t have the "Multiple Speakers" option (as far as I know). It also won't work with content streamed directly to your ATV, obviously, because there's no way to stream from ATV to other devices.
Let me know if this works.

Convert and save video, audio, and images to more than a hundred standard f

I bought Quicktime pro because it said it could "Convert and save video, audio, and images to more than a hundred standard formats". I have .mov that i took and want to change to an .avi
I feel stupid but how do i do it? shouldn't there be a "convert" or "save as" button?

AVI isn't dead, it remains the ONLY format in which any real editing can be performed (ie filters and colors and zooms etc). That said, converting FROM any compressed format like .mov back to an uncompressed format will not restore the information lost in the original compression conversion. Like the man said, you probably won't like the result. If you want to make an AVI to edit artistically, you'll need to go back to the source and re-record it to make an original uncompressed avi (example I use 'DVD to AVI converter' software to recode my homemade DVDs to a huge uncompressed AVI, then play with cutting and cropping and zooming and special effects and color filters, etc in a program such as VirtualDub, an THEN open in QT Pro to convert to MOVs to share).

How to use Audio and Subtitles in iTunes?

Hello Everybody,
Anybody can help me how to use Audio and Subtitles in iTunes under Control/Audio and Subtitles?
Its not active, So, how to watch a movie with subtitles in iTunes?
Regards,
Boudy,

Hello Abdelaal. I have the solution for you!
In App Store, there is an App called "iSubtitle" it can merge .mp4 and .m4v files with .srt files! Hereby you can use subtitles in iTunes!
Hope it helps you
Yours Sincerely
Thomasen.

In the past when I have imported my dslr video/audio files and then my zoom audio files Final Cut Pro has organized them in pairs in my library. For some reason my video/audio and my audio are being organized seperately. How do I fix this? Thanks!

In the past when I have imported my dslr video/audio files and then my zoom audio files Final Cut Pro has organized them in pairs in my library. For some reason my video/audio and my audio are being organized seperately. How do I fix this? Thanks!

Thank you Russ! Seems as though the timestamp on my audio files was completely incorrect so it placed the files far away from the corresponding video. I've modified the timestamp information and this has helped. The hour/minute information is incorrect but at least now I'm in the ballpark. Thank you!

My iphone 4 microphone won't record sound on video clips and doesn't work with Skype

This is the first time I have used the forum. My iphone4 microphone won't record sound on video clips, and won't work with Skype.

I have checked that I have the latest software. I have restarted phone. I am not sure how to perform the other things you mentioned , restore and reset as new... Would I lose any data by doing these? Thanks for the reply.

DVD Menu Setup Page for Audio and Subtitles

Scenario: I have a Setup Page menu (for 1 timeline) that has 2 audio tracks (Stero and 5.1 Surround), and 2 subtitle tracks (English and Spanish). How can I make the buttons work as toggles (on/off) without having the selection on an button jump the viewer straight to the timeline?

If it goes to the timeline, you are linking to the timeline.
Here is the "specify link" option where you should select a button on a menu itself, not a timeline.

Recording with just one audio file per track

Is there a way, when recording, to just have one continuous track? When recording a 2nd take on the same track (say track 1), instead of having another separate audio file for the 2nd take, I would like to have just one complete audio file instead of bunches of them. I've looked in Preferences and the menu options and have overlooked it if it's there. I hope I am being clear. Thanks.

Hey Terry,
I'm not sure why this is a problem - if you think about it its just like recording multiple takes on tape - you then comp the best bits to create the final 'take'.
Also as AA streams direct to disk at some point (ie when you stop recording) AA has to close the file otherwise it would get corrupted.
I guess it just gets a little getting used to?
If I'm gonna do a complete 2nd (3rd, 4th etc) take then I might drag the previous take down on to a muted track (if I think I might use bits out of it) and then re-take - or just delete the previous take and re-record.
At the end I then select File->Delete Unused Media (I think thats what its called). When all takes and mixing is completed I use this application to identify all the unused files that are not needed and that can be safely deleted - http://www.mediasweeper.com.au

Help with audio and sound tracks

I have a .mov file with audio. I added a sound file I downloaded and it plays fine with QT and I hear both tracks, the recorded audio and music in the background. But when I post to Youtube the added sound doesn't play. How can I combine both tracks into one? I've tried exporting but can't seem to get the added track to play.
Using QT Pro 7.6.4 and Leopard.

http://www.discoverynet.com/~ajsnead/alpcond/alpha_18/midi/rocky.mid
It's a MIDI file:
http://en.wikipedia.org/wiki/MusicalInstrument_DigitalInterface
In order to use it at YouTube you would required to convert it prior to adding it in your source file to a real "audio" format.
This is why it didn't play after the export and wasn't converted by YouTube.

IChat Error (Video, Audio, and Screen Sharing)

I received a Black Macbook for Christmas, and have not had any problems with it until today. Yesterday I installed 2GB of Kingston RAM that I ordered online from Newegg, and today I cannot do anything in iChat besides chat. Whenever I attempt to start an audio chat, video chat, or screen sharing, I recieve an error.
"There was a communication error during your chat."
"______ cancelled the connection. You can send details about this problem to Apple to help improve future versions of iChat"
I've tried it with 3 different people and it gives me the same error.
Last week I was video chatting and screen sharing fine with the same people.
I don't see how it would affect it but is there any chance it was caused by the RAM? Other than that I have had no problems at all. :\
Thanks in advance. ^_^

I fixed the problem. ^_^
If anyone else has this problem, it might be caused by internet sharing. I had internet sharing setup with my 360, as soon as I cut that off it worked fine.

DVD Audio and Subtitle script Please HELP

Subtitle Audio Scripts Please Help
Posted: Sep 3, 2006 8:04 PM
I need to write a script that does the following:
1st I have the end user choose if they want subtitles on or off and then both the buttons will default for the user to chose a language choice. So I need a script that will play just audio streams and a script that will play audio with the same language subtitle. Also if the user just pushes the language button I need the script it to default to play just that language...
Here is what I have scripted already please tell me where my mistake is:
Button Command
Subtitles
On mov GPRM 0,0
Jump Special Features: English
Off mov GPRM 0,1
Jump Special Features: English
English 1. mov GPRM 0,2
2. Set System stream Au(Audio Stream 1) if (0=0)
3. Set System Stream St(Subtitle Stream 1)(ON) if (0=0)
4. Goto 11 if (GPRM 0=0)
5. Set System stream Au(Audio Stream 1) if (0=1)
6. Set System Stream St(Subtitle Stream 1)(Off) if (0=1)
7. Goto 11 if (GPRM 0=1)
8. Set System stream Au(Audio Stream 1) if (0=2)
9. Set System Stream St(Subtitle Stream 1)(Off) if (0=2)
10. Goto 11 if (GPRM 0=2)
11. Jump JOFDVD:Start
12. Exit
All my language scripts will be similar just with different audio and sub streams.
Help Please-
Ryan-

Hi There
I think your error is in the first line of your script.
You're using GPRM 0 to set your subtitle condition and when you press enter on your english button your first line says
1. mov GPRM0,2
I'm assuming you want to use this first comand to set your languange condition so you should use GPRM 1 (or more) - at this stage all you're doing is removing the subtitle condition set by your earlier script.
Good luck
Cheers
B

Record a selected Video, Audio and Subtitle track in low res for proof.

Similar Messages

Maybe you are looking for