Record Agent Greeting and the DTMF Phone Pad

Strange behaviour here.
If I use a 7960 phone and press the icon to record an agent greeting, the Phone Pad pops up and I can press the buttons to navigate the menus. I can also use the hard phone. Of course, this phone has no BIB, so I connected another couple of phones.
If I use a 7961 phone, pressing the keys on the Phone Pad does nothing - but I can use the hard phone. That''s strange.
If I use a 7971, pressing the keys on the Phone Pad does nothing and neither does pressing the keys on the IP phone!!! I created a similar app outside of the Recording process and attached it to a Route Point and get the same behaviour. Must be a phone setting that is not allowing DTMF.
Regards,
Geoff

please share CVP and VXML application logs, but i think you must place agent greeting type variable in recording script. after CED just set greeting type.
regards
Chintan

Similar Messages

CVP Record Agent Greeting Failing

I'm setting up the default Record Agent Greeting application with CVP 10.0, UCCE 10.0, Finesse 10.5. I can dial the entry point number from Finesse and it goes to the ICM script. I hear the message "Please select the greeting you wish to hear or record..." I then press the greeting number hear the next message "Press 1 to hear the greeting, 2 to record..." and then it runs the RecordAgentGreeting VXML application. It immediately states that a greeting filename was not provided. Do I need to set the session data for this somewhere or is the agentname supposed to populate automatically? At least I think that's my issue.

please share CVP and VXML application logs, but i think you must place agent greeting type variable in recording script. after CED just set greeting type.
regards
Chintan

UCCE Record Agent Greeting Exaple Script Fails at first Run Ext Script Node

I am deploying Agent Greeting and trying to get the recording piece completed. When the example script gets to the run ext script node it fails.

I am running 9.0 for UCCE, CUCM, and CVP.....When I press the record button on CTIOS agent I get a 101707 error with somthing about the route. Then I do a script monitor I notice the flow stops at the first run ext script node
I have attached the PG Logs
Sorry about the vagueness in the first post just seeing if any knew of this issue with the example scripts.

HT1766 i have backed up my iphone 5 and have a 5s I want to set up from that backup file. I have gone through the process once, and when I next connect the new AND the old phone to the mac and open itunes, restore or create new phone comes up not synch??

i have backed up my iphone 5 and have a 5s I want to set up from that backup file. I have gone through the process once, and when I next connect the new AND the old phone to the mac and open itunes, restore or create new phone comes up not synch?? Tried starting the whole process over once but same result. Seems not to recognise the phone and just synch as it should. Help?

Hello CosK,
The following guide can step you through the process of using a backup of your iPhone 5 to transfer your content to your iPhone 5s.
Transfer content from an iPhone, iPad, or iPod touch to a new device
http://support.apple.com/kb/HT2109
Should one or both of your phones fail to appear in iTunes, the following article provides troublesooting steps that can assist.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Allen

Just started using a brand new ICD-AX412. I have recorded a meeting and the playback is fine but I h

Just started using a brand new ICD-AX412. I have recorded a meeting and the playback is fine through the 412. 2 problems.
1. With the expansion M2 SanDisk, it takes the 412 about 10 minutes to "Access". Top line says "Accessing" for 10 mins. Then it becomes available to record.
2. 412 will not connect to a computer usb port. Just says "connecting" forever.

Hi pwmac2005! I'd like to verify further information. Does it happen on all USB ports? Does it also happen on another USB? Let me know. Thanks.

HT201412 how do i undisable my ipad if i forgot my password and the password key pad doesnt even show up?

how do i undisable my ipad if i forgot my password and the password key pad doesnt even show up? i tried to restore it but it didnt work it still shows the same screen.

iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

How do I insert a WAIT or a PAUSE function, followed by a constant string of numbers [international code, country code and the destination phone number].

I'd like to program a LOCAL ACCESS NUMBER, then insert a WAIT or a PAUSE function, followed by a constant string of numbers [international code, country code and the destination phone number]. Dialing the local, US access number is not an issue, but I can't find any info in the manual on how to insert a WAIT or PAUSE or how to insert the remaining string of international codes and destination phone number. Any help would be appreciated. Thanks!

How to Add Pauses when you Dial a Number on the Samsung Galaxy Note 3 - For Dummies
It is also described on page 42 of your owners manual...

Each sync adds records to outlook and the phone

Hi,
I really need help. I purchased Nokia 6280.I had 6230 before. I upgraded pcsuite. I am using the hebrew vesion.
Every sync, all the calendar records are added again (not updated), to outlook and to the phone.
info:
phone software: RM-78 V 06.10 21-12-06
מערכת הפעלה:
Microsoft Windows XP
Build 2600
Service Pack 1
שפה: English
שפה עבור תוכניות שאינן תוכניות Unicode: עברית
מקומי: עברית
שפת קלט: English
Nokia PC Suite:
גרסה 6.83.14.1
שפה: עברית
Connectivity Cable Drivers:
גרסה 6.83.9.0
PC Connectivity Solution:
גרסה 7.7.10.0
Microsoft Outlook:
גרסה 11.0
Build 6353
מחסנית Bluetooth:
מחסנית WIDCOMM Bluetooth
גרסה 3.0.1
Build 911

Yes. I tried so many things. Reinstalling PC suite, using the remaining files remover software and more. It PC suite seems to have few bugs:
1. If a sync opertion is terminated in the middle for some reason, the next time I will sync it will double the records.
2. It has a problem it adds a space character in the middle of the contact's name in(maybe just with hebrew characters, don't know)
3. restoring the contacts with The backup tool or copying the contacts back from outlook forces me to define again all the groups in the phone and the primary numbers for contact with more then one number.
I hope it will be fixed

UCCE v8.5 with CIPC8.6 agent greeting and Whisper annoucement

Dear networkers,
We do have UCCEv8.5 deployed with CVP 8.5, CUCM 8.5 and CAD 8.5.
We have Cisco IP Communicators(CIPC) v8.6 installed we would like to implement the follwoing two features:
- Agent Greeting
- Whisper Announcement
As far as the documentation says, we need a phones with Built in bridge. Does CIPC support uch feature ?? Can the above two features be deployed using CIPC ?
thanks in advance.
Best Reagrds.

Hi ,
You can deploy those two features with cipc 8.6 ....first you need to enable Built-in-Bridge in CUCM for the perticular cipc..
For more info refer the below url
http://www.google.co.in/#hl=en&safe=active&tbo=d&spell=1&q=agent+greeting+%26+whisper+announcement+configuration&sa=X&ei=Yg8iUZj8LsXE0QHPl4GYCQ&ved=0CCsQvwUoAA&bav=on.2,or.r_gc.r_pw.r_qf.&bvm=bv.42553238,d.dmg&fp=ca85679e4aaec60f&biw=1366&bih=651
Message was edited by: Silambarasan K

How do I get my new iphone restored with my old backup? my old iphone had ios5 and the replacement phone i got has ios4 and it wont let me backup my phone because it doesnt have ios4... i cant get ios5 without restoring my iphone and backing it uo

Basically, i need all my old stuff from my iphone 4 with ios5 onto my new iphone 4. The new phone i received only had ios4. I went to get all my contacts and backup from my old phone onto my new phone and it wont let me because my new phone is only ios4 and my backup from my old phone was in ios5. I cant get ios5 on my phone without creating a new backup of my new phone, which has nothing on it. If i restore it as a new phone and backup virtually nothing from my new phone, will that get rid of all my old backup stuff from my old iphone?

Bottom line is you CANNOT restore to a phone from a backup that has a more recent iOS which is what you're trying to do. Just can't be done.

I am unable to restore from iCloud backup because the new phone has iOS 8.1.2 and the old phone has iOS 8.2? Any help.

I Have just bought an iPhone 6 and want to restore my iPhone 4s via iCloud backup to the new iPhone 6. The setup of the iPhone 6 halted because according to the new phone it has iOS 8.1.2 whereas the backups were stored using iOS 8.2 following my updating of the iPhone 4S recently. How do I jump through this hoop? How do I update the new phone to iOS 8.2 without serring it up first? Anyone, please help?

Update the new phone to the same version that has been used to create the backup. In your case, the new device has to run 8.2 to be able to use the backup made with the other device.
Setting it back to factory settings will install the newest version and after that you can use the backup made under 8.2
Use iTunes to restore your iOS device to factory settings - Apple Support

SIP setup and the 'sip phone' symbol on E71

Hey....
OK SIP users..this question is for you.
Iam running my E71 and have activated and paid for a SIP account (voiptalk) and the setup went well last week, and I have made a few successful SIP calls from the E71.... good stuff !
I am calling landline numbers in the UK using SIP (VoipTalk) through FRING... no problems...
My question is... the little SIP-Phone symbol that was present on the top left of the screen has now disappeared... but I can make SIP calls...
Erm... why has the symbol gone ?
What does that symbol mean in reality, as I can continue to make SIP calls...
Thanks in advance
Harry

Okay thats a question more to the phone's behavior rather then SIP settings.
Looks like your phone keep dropping out symbols.
Have you tried to reboot your phone lately by swithing it off removing the battery and put it back together after a couple of minutes.
Sometimes that solves a lot of issues.
Try it and see if it brings back the symbol.
Mark me a KUDOS if this has helped...

Plorking and the I-Phone

I would be interested to hear how people are finding the I-phone's functionality as a means to maximise plorking and minimise working?

Apologies squigles - gen y lingo. Plorking refers to the fusion of work and play. The term is used to refer to two main types of scenarios being: doing what we enjoy as a means to earning a living (eg professional surfer) and (ii) importing aspects of fun into what we are actually stuck doing (eg flexible working options ie - in this case working from out of the office).
I guess I wnated to know how well people consider the i-phone provides for this??

My iphone was working normally ando today...it turned off and....i'm trying to turn on...buy is not working...and the cell phone is hot hot hot...someone can help me please??

when i plug the cell phone in my computer...the computer doesn't aceppet the cell phone..so...i can't restore my iphone...
i press both bottons...and...is not working....

The recovery mode sound like your best option and unfortunatly everything will be lost unless you did a back up of your device recently make sure you have a computer running itunes 11.1.1 plug in the usb to the computer and after that power your device off by holding the sleep/ wake button until it says slide to power off and then slide to power off after that press and hold the home button while holding the home button connect your device to the computer continue to hold the home button until connect to itunes shows on the phone. on the computer it will say itunes has reconized a device in recovery mode just click through the menu to get your device to back to new

Whats the difference between the iphone 5 and the i phone 4?

whats the difference between the iphone 5 and the iphone 4?

Since Apple has released no details, and nobody even claims to know the answer to this, it would only be speculation.
Speculation about unreleased information on Apple products is strictly against the terms of this messageboard, and is prohibited.
If someone were to even speculate, it would be grounds for deletion of the thread. You will find out when the rest of us do.

Record Agent Greeting and the DTMF Phone Pad

Similar Messages

Maybe you are looking for