Record arming goes away when externally sync'd

New to LE8, but here is a simple thing that I used to be able to do with the Performer.
I would like to get the LE8 to start recording on a MIDI start from an external sequencer (built into my music workstation, say), but it does not work in my situation.
- Set LE8 to externally sync to Midi
- Arm LE8 to record, press the Record button on LE8 transport panel
- Push a start button on the built-in-sequencer on my synth
- LE8 disarms recording mode and
Please let me know if this would never work (so I would stop working on it, Reverse of it works by making the LE8 the master.). Or if there is something I am doing wrong that can be fixed, that would even be greater.
Thanks in advance!

This appears to be the fact that Logic 8 based code does not support SRM. Another question coming.

Similar Messages

My screen dims intermittently to almost completely dark, it goes away when I press the top button but, it is annoying. what is wrong?

My screen dims intermittently to almost completely dark, it goes away when I press the top button but, it is annoying. what is wrong?

Try the standard trouble-shooting steps: Restart, Reset, Restore. If these don't solve the issue then you may have a hardware probem. If so, contact Apple Support.
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPhone shuts down, then press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off"
Restore: Use iTunes on your computer to Restore your iPhone to as new.

HD noise when flat, goes away when tilted back now wont boot

hey guys... i've been reading some of the discussions about HD noises and sounds. it seems like everyones HDs make noise or slow down when tilted. I HAVE THE COMPLETE OPPOSITE PROBLEM. i apologize for the long post:
12" Powerbook [purchased 05/04 and well taken care of]
mac OSX 10.3.9
original toshiba HD 60GB
its kind of weird. i was running ichat, iphoto, safari, photoshop, and iflash [flashcards] all at the same time when i noticed a significant slow down in performance which stalled all programs. i then head a loud whiring humming buzz that sometimes turned into grinding. of course this freaked me out. i tilted my powerbook backward to give it a listen and then the noise went away. not only that all the programs completed all previous requests faster than ive ever seen them perform before. well i repeated this to see if the effect was reproducable, and it was.
well the next morning i turned it on and my powerbook was working fine. no noises or indications impending failure. well i had to leave the library so i shut my powerbook off but the filevault program wanted to recover unused HD space so i let it do its thing. when i tried to power on my powerbook it got to the grey screen with thespinning gear and wont get past that point.
figuring that it was an HD problem, i got my buddy's ibook, set my powerbook into firewire mode by booting and pressing "T", and connected them. i was able to recover data off of my non admin accounts using Migration Assistant but my main admin account wont let me even touch its files due to the filevault settings. i found away to at least get to my files in the main acct by mounting its .ars [i think thats wht it was] image i found under my non main admin account user folder. the thing that gets me is that i can easily access my HD in firewire mode, but the powerbook itself wont get past that grey apple screen. it makes unusual noises and then stops and stays stuck on that screen with the spining gear going.
now this is a major headache since im a med student and i need my powerbook to access my flashcards, notes, and online resources. ive come to realize how dependant ive been on this machine. can anyone help me? is it my HD thats the problem? is it a filevault thing? do i just need to reformat? why do i get that sound when the PB is flat but it goes away when its tilted? now im kicking myself in the butt for not getting applecare.
thanks guys,
Edward
MS2 Ross University School of Medicine
evilmcnasty.blogspot.com

Edward:
Last week, my PB started making the same noise that you've described, which is opposite of the other posts, ie buzzing when flat, quiet when tilted. I ran disk utility, TechTool Deluxe (that came with AppleCare), etc without finding anything wrong. Yesterday, I noticed that my s.m.a.r.t status shows my hard drive to be failing (in red letters). My understanding is that it will fail eventually, even though I am using the computer without incident right now. Suffice it to say, I have backed everything up and am waiting for the inevitable moment. I plan to call AppleCare today (sorry to hear you don't have it) to enquire about what I should do. In particular, I cannot go without a computer right now, this malfunction being at the least opportune moment. Can anyone say if AppleCare will give me a loaner until my PB is healthy again?
I realize that this post is of little use to your situation, but I just wanted others to know that the "opposite buzzing sound" exists and that it seems to indicate an eventual failure if mine is the typical result of the first buzzing symptoms.
Good luck with yours.
Ernie

When i open ibook, the iTunes store asks for my password. it goes away when i press cancel or when i put in my password. why is this happening?

When I open IBook, the ITunes store asks for my password. It goes away when I press cancel or enter my password. It seems unnecessary to me. Why is it doing this? I already paid for the book.

If you are trying to update information for your apple id then go to appleid.apple.com and click on manage your apple ID... you'll probably have to enter your old email address/password

When entering a website my history will pull down in a list but when I hit enter to go to a site after typing it in that drop down doesn't close anymore, how do I fix that so it goes away when I navigate to a page?

Example: facebook.com
My history will drop down from the navigation bar and highlight the letters I am typing so I can choose a previous page if I want to. But when I press enter to tell it to go to a site the drop down does not go away I have to click somewhere to make it go away. It is suppose to just go away when you click one of the history items it shows or press enter to go to a site and it doesn't anymore.

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Media Encoder goes away when launched from Prem-3.2 CS3 (help !)

Need help fixing Adobe Media Encoder - Dies after launching from Pre-Pro cs3 v 3.2 Vista Platform.
Very short clip. Just goes away.. no messages. I've gave it time to "soak"... 15 minutes - source clip is only minutes long.
The only way to recover Premere is to kill VIA task manager and re-start.
I've reinstalled CS3 master collection from scratch - all Adobe products have all the latest patches/updates applied.
I've appiled the latest Vista Updates and the OS is current.
I HAVE to fix this any idea's what going on here ?
PLEASE PLEASE help.. and let me thank you in advance for your efforts.

Robert,
Welcome to the forum. While it might not yield even a clue, their might be a bit of a "trail" on the crashing of AME. Take a look at this ARTICLE, and see if you can locate any useful clue.
Good luck,
Hunt

Primary screen goes dark when external display is added

Hi,
Earlier, when I was on Mac Lion, I always used to face problems whenever an external Monitor was added to the Mac through the firewire to VGA converter port.
Hoping that Mavericks update would give me a respite from the issue, I upgraded my Mac Pro and to my utter shock, the issue has got magnified in mavericks. The primary screen goes completely dark whenever I add the external monitor.
Any idea how to overcome this issue ?
Thanks in advance !

I meant the mini Display Port intead i wrote firewire port.. Hope it doesn't confuse anyone !

JmenuItem not going away when I click outside of the applet

Hi guys,
I created a swing applet with JMenu and JMenuItem. If I click within the applet area, the JMenuItem will go away. But when I click out side of the applet, the JMenuItem will not disapear. How to fix this problem?
Thanks in advance.
yj

OK, here are the main parts. First your class must implement the FocusListener interface:
public MyClass extends JFrame implements FocusListener {
next you must add the FocusListener:
myJMenuItem.addFocusListener( this );
and finally you must implement the two methods focusGained and focusLost:
public void focusGained( java.awt.event.FocusEvent fe ) {
Object source = fe.getSource();
if ( source == myJMenuItem ) {
//you don't need to really do anything here.
public void focusLost( java.awt.event.FocusEvent fe ) {
Object source = fe.getSource();
if ( source == myJMenuItem ) {
myJToolBar.repaint(); //Or something to reset it
Essentially you are checking for when the focus is lost on the JMenubar, you might try using the focus listener on the menu item and if that doesn't work they using it on the toolbar, or even the main frame. Once the focus is lost the focusLost method is called you want to reset your menu bar and repaint it.

Steady hard drive writing sound goes away when computer is held sideways

I just had my hard drive replaced because it started making this awful sound and I thought well it's about to go, backed everything up and bring to apple for a fix. they agreed after we could not boot up from any external source, cd or hard drive, so they replaced it. I opened it there after the fix, was ok, brought it home, the noise was virtually the same as when I droped it off, so I picked my computer up thinking it might change the sound since something is moving and or spinning, when I turn it sideways all is well, no sound, but I can't work like this, does anyone know what it could be??? and no I'm not running my cd drive and I have run disk utilities from the install disk, no signs of problems, just a loud noise.
MBP 15 " Mac OS X (10.4.9)

oh common don't get ur panties all caught in a bundle, I thanked them, I appreciate it very very much, the answers were just ones I was expecting and not looking forward to, same as yours, I don't have the tools right now to open up the machine and tinker, I even have a hunch that the guy picked up my hard drive after putting it down next to the working one which I'm sure was refurbished and accidentaly re-installed mine. I was really looking for the "if you use a hammer and hit it right "here"" approach.
ok jk
but thank you for your thoughts, this all leads me back to the apple store. boy oh boy I'm so excited.
PS some of us out here in oakland tend to be a little rough around the edges I never meant to offend anyone. And I will do what I can to return the favors, I'm just more versed in other programs so I tend to give advice on other forums for other thingies.

Rating goes away when added to mobile album

From the organizer "all media" tab, when I drag a picture to a mobile album, the picture in the mobile album lost the star rating. Unpredictably, the shot date will change to whenever I put the pic in the album. Anybody know what is going on?

For the rating problem, see the answer from Surendra in this post:
http://feedback.photoshop.com/photoshop_family/topics/photoshop_elements_and_revel_integra tion_is_not_convenient
About the dates, it seems that there is a real problem with videos. I don't do videos, but the problem is linked to the fact that you can't store metadata in the video file like with still formats. The pertinent 'Date Taken' metadata is not carried on with the video file, whereas the 'date modified' assigned by the OS can be used.

Ram preview green line goes away when changing zoom level

I did a ram preview of my project, about 12 seconds long. Everything looks good until I want to zoom in or out on the comp, then the green line disappears and I have to render it over again. I don't remember AE doing this before. If I zoom to say 25% and render part of the comp, then zoom to 50%, that part with the green line is gone. I can render a different segment of the comp while in 50% and switch back to 25%, and the green line from when I rendered at 25% is back. I've turned off adaptive resolution in the fast preview options, and I turned off the disk cache. Is this a bug or just the way AE works now? I'm using CS6 version 11.0.2 on Win7.

Actually, I think I am. I didn't notice it before, but when I zoom in, if I have the resolution set to Auto, it changes between quarter, half and full depending on the zoom level. I've never noticed that before, or maybe they only recently made it so it didn't say Auto all the time, but now says what effective resolution it's set to. So is that the answer to my problem? Leave it on full resolution (or whatever I need at the time)?

Java plugin not going away when browser closes

Not really a huge problem, but just a question. At my work, we've developed an insurance card scanning applet and on one of the machines we have installed it on the plugin doesn't go away once all of the browsers are closed. The machine in question is a Windows 98 2nd Ed box and the plugin is ver 1.3.1_02. We have the software installed on 6 other similar machines at the site and none of them have the problem. On Windows 2000/XP/NT it works fine too.
What sort of things could cause that? Browser settings or some other settings? Just curious.

Thanks, that's sort of what I thought it might be. I didn't create the applet but I get to fix it. :)
I've also found that the applet is leaving a file handle open somewhere. Could that be why it won't die properly? It's not that large of an applet and it's not multi-threading but we do use JAI and JNI along with communicating with the browser through JSObject which I've read can cause trouble. Do you know of any good tools that could help me track down loose threads/file handles in the applet? Or techniques to clean up properly?
Thanks for the help.

Keyboard not going away when I'm not typing

My keyboard stopped disappearing when I'm doing things like looking at photos or scrolling through text messages. Suggestions?

Try resetting your phone by pressing the lock button and home button at the same time till the apple logo appears. That normally fixes most bugs

The extrude effect on my text goes away when brought from After Effects to Premiere since I updated to 2014 CC. Help?

Hey everyone,
Ever since I have updated from my CC to the CC 2014 last night, My extruded 3D ray traced texts become CLASSIC 3D texts when brought to Premiere from After Effects. Has anyone else experienced this problem yet or have any possible solutions? I appreciate it, Thanks!

Hey everyone,
Ever since I have updated from my CC to the CC 2014 last night, My extruded 3D ray traced texts become CLASSIC 3D texts when brought to Premiere from After Effects. Has anyone else experienced this problem yet or have any possible solutions? I appreciate it, Thanks!

With Firefox running, Office 2007 generates a "Cannot Empty Clipboard" error message when pasting information between Excel cells -- the behavior goes away when I close Firefox. Is there a way to prevent this?

I am running Windows XP, Office 2007, and Firefox 3.6.13.
Whenever I have Firefox running in the background and I attempt to paste information between Excel cells a "Cannot Empty Clipboard" error is generated. I have attempted numerous other fixes for this: Excel and Office settings. But nothing seems to help. When I close Firefox, the errors are no longer generated.

The Skype add-in was the culprit in my case. Disabling it fixed the problem. As soon as I enable it, the problem comes back.

Record arming goes away when externally sync'd

Similar Messages

Maybe you are looking for