Record Counter in trailer for DMEE 005 Canada

Hi , We have 2 originator ID for one bank account when we run F110 with vendors with invoices in USD & CAD we have in the same file 2 blocks one with CAD and other with USD we have Header + Detail + Trailer for both
The issue we have is with the counter of the Trailer 2 . In the DMEE setting is looking for Reference Tree node and the tree node is the top level DMEE. The probleme is in the last trailer if I have total of 9 lines with CAD + USD the counter put 10 but in fact only for USD I have 3 lines . The counter should put 3 and not the total of all
Do you have few solution to fix this issue . We try to change the Reference Tree and used aggregation but we don<t find the right solution. I need to pick the header and I'm not able to put Ref ID on Header

Hi Frédéric,
Check if note 1262855 can help you with this issue.
The trailer must be filled only from the position 69 to 112 with zeros,
the Filler from the position 113 to 1352 is alphanumeric, that means it
must be filled with spaces. I believe implementing note 1262855 will help.
Kind Regards,
Fernando Evangelista

Similar Messages

Record count is different for Full load and Init with data transfer

Hi all,
We have a data source for which delta is enabled on Calendar Day.
If I run the full load record count is 2670.But If I run the delta record count is 2665.5 records are missing.
Would you please help on this.Why those records are missing.

Hi,
Actually for Full Load say you have 50 records. When you run it will upload 50 records.
Now if you run delta if there is no records changes it wouldnt update because there is no update in the existing records.
only delta is done when there is changes in the records.

How to get the record count printed for the report in the Dashboards

Hi,
I would like to get the record count printed at the bottom of every dashboard report like:
< 1 - 25 of 6300 > instead of < 1 - 25 >
Any help is appreciated
Regards
B

I have tried the following formula which identifies the lowest grain but it does not seem to give me correct result.. I am not getting the correct count. I am getting as 3.A work order can be updated only once at one point of time.hence the formula
MAX(RCOUNT(CAST("SR Wo Fact"."Crm Wo Number" AS CHAR) ||CAST("SR Wo Fact"."PSC Timestamp" as char)))
I tried only MAX(RCOUNT(1)), but I was able to get the record count as corect for Administrator but not for other users.
Has anyone come across this scenario.
Thanks Shravan
Edited by: 786443 on Aug 19, 2010 10:22 AM

How to get count as 0 for records not in table

Hi All,
I have requirement where I need count of records in the table based on ids. Example query below
SELECT empid ,
nvl(COUNT(id), 0) empcount
FROM employee
WHERE empid IN(1, 2, 4, 5)
GROUP BY empid
In the table only record for "empid=2" is present so I get count 1 for it. But with it I should get count as 0 for non existing records. Expecting below output
empid | empcount
1 | 0
2 | 1
4 | 0
5 | 0
Appreciate your help and Thanks in advance.
Regards.
Ashish

e.g.
SQL> select column_value deptno, count (deptno)
from emp, table (sys.odcinumberlist (10, 20, 100))
where deptno(+) = column_value
group by column_value
    DEPTNO COUNT(DEPTNO)
        10             3
        20             5
       100             0
3 rows selected.

How to caculate the records count for a measurement with a filter?

I have a fact table which add relationship to a datetime dimension. I create a measurement based on the fact table, like [MeasureA]. I want to calculate the record counts of [measureA] of today, how to write the mdx query? Thanks!

Hi Lavandula,
According to your description, you want to calculate the numbers of the record of a measure for a specific day, right? In this case, you can use
Count function which returns the number of cells in a set to achieve you requirement. Here is a sample query on Adventure Works for your reference.
WITH
MEMBER [Measures].[SetCount] AS
COUNT([Product].[Product].[Product].Members)
SELECT
{[Measures].[SetCount]} ON COLUMNS
FROM
[Adventure Works]
Besides, if you want to count the cell numbers with a condition, you can use
Filter funtion inside the Count function.
WITH MEMBER [Measures].[High Volume Products Count] AS
Count(Filter([Product].[Product].[Product], [Measures].[Internet Order Quantity] > 5))
SELECT [Customer].[Customer Geography].[Country] ON 0
, [Date].[Calendar].[Date].MEMBERS ON 1
FROM [Adventure Works]
WHERE [Measures].[High Volume Products Count]
Regards,
Charlie Liao
TechNet Community Support

How to generate Header and Trailer for a file

Hi Guru
How can we generate header and Trailer for a file
EX:
i want to generate header with date and trailer with record count from table.
Sample file :
20120120
fwsfs
adfwsfd
adff
afsadf
afdwsg
adgsg
adgsgg
asgdsag
sdgasgdaf
sdfsagfadf
10

Hi ,
1.Create an interface to load data from oracle to file and set generate header as false option in IKM .
2.Create variable get_current_date of alphanumeric datatype and implement logic SELECT to_Char(SYSDATE,'yyyymmdd') FROM DUAL under refreshing tab
3.Create variable get_record_count of numeric datatype and implement logic SELECT '<%=odiRef.getPrevStepLog("INSERT_COUNT")%>' FROM DUAL under refreshing tab
4.Create a package
Drag the get_current_date variable ,
Drag odioutfile and paste the below logic OdiOutFile "-FILE=D:\ODI_TEST\emp.txt" "-CHARSET_ENCODING=ISO8859_1" "-XROW_SEP=0D0A" #GET_current_date in command tab
Drag the interface
Drag another variable get_Record_count
Drag the odioutfile and paste the below logic OdiOutFile "-FILE=D:\ODI_TEST\emp.txt" -APPEND "-CHARSET_ENCODING=ISO8859_1" "-XROW_SEP=0D0A"
#GET_RECORD_COUNT in command tab
Link all these in sequence,save and run the package.
OR Modify the IKM SQL to File Append to achieve same functionality.
Thanks,
Anuradha

Record count per page , total record count per report in BI Publisher

hi,
In Oracle BI Publisher tool , can you please tell me how to display total record count of a report ? as well as how to display record count per page ?
Thanks for your help
Regards
Gayathri

check inbox. forwarded the updated template

Record Count Issue in Search page ?

Hi Friends
I am trying to display record count on Search page and I have the following code in
The table has total of 62 Rows
AM : for testing purpose, i am printing in log
public void getISAGRecordCount()
OAViewObject vo = (OAViewObject)getXXG2_ELIM_ISAGSView1(); //getXXG2ISAGSearchVO1();
int fetchedRowCount = 0;
vo.setMaxFetchSize(-1);
vo.executeQuery();
fetchedRowCount = vo.getRowCount();
System.out.println("RowCount: "+ fetchedRowCount);
IN PFR of CO: I am calling by this way
am.invokeMethod("getISAGRecordCount");
the Issue is
for the first time, when i search Based on search criteria, I know it should dispaly 10 records but in the Log file i see the total Record Count of the Table Ex; 62
When i do the serach for the second time, based on search criteria, I know it should display 20 records, but the log file has 10 records ( previous search results)
If I do the search for 3rd time, I see 2nd search results in log
Any help in this issue, how to fix this?
Thanks
Ravi

Hi,
Please donot use getRowCount(), use getFetchedRowCount() and remove setMaxFetchSize(-1).
Hope it will resolve your issue.
Just for understanding of the concept:
getFetchedRowCount() returns the number of rows cached in the view object -- including programmatically inserted rows.
The getRowCount() implicitly execute a query against the database (if a query has not been executed yet)
Regards,
Reetesh Sharma

Invalid record count - grey screen- Target Mode Cures

Hi there,
I have a common problem: I was doing nothing particular that I remember: No fancy file uploads, doanloads, creation, erasing - nothing special:
Anyway after a customary week, or few days of leaving the macbook permanently on, I think "let's give it a rest".
Then switch back on:
- Grey screen, spinning grey progress wheel fine.
- Takes a while. Strange. After say a minute - it just switches off wordlessly.
- Reset PRAM: No solution. Take a look with single-user startup in console: Files are all there, OK. Disk not dead.
- Start up from OS X 10.5 disk:
Permissions repair fine. Good.
Verify disk: FAIL! +*Invalid Record Count.Volume check failed.*+
Next: *Try target disk mode to back up essentials* - that works fine: I now have Time Machine AND a smaller important essentials backup.
But finally, here's the surprise: Just for kicks, I *shut the macbook down, try a reboot - and it works!*
But I note that root system files are unchanged since the problem occurred: ".hotfiles.btree" for example (I don't know what that is but suspect it's relevant).
Then: I tried restarting again - and back to square one, it won't boot.
Do the "Target disk" firewire mode trick again, and browse a few folders: And it boots (slowly).
If I just leave the Macbook on permanently - everything seems fine. Not even sluggish.
So:
- Why can connecting a disk with an incorrect file system in target disk make the system forget about these problems when booting?
- Why does the problem return on a successive reboot?
- Is it related to some system files being ignored if booting straight after a target mode session?
- What is ".hotfiles.btree", and should it not exist ?
And the big one:
- +Can extended Applecare, wot cost me loads of money, help me?+

Hi Cornelius:
Having been a faithful Apple-groupie for a while, and despite some problems over the years (hard drive failing, screen going, etc.) this is the first time I'm disappointed with them, because theor Micromat Applecare deal is a ripoff:
You fork out for Applecare extension: All you get is something that say "Yep, you've got a problem. Now go and buy techtoolpro".
That is, the TechTool Deluxe is practically useless. Argh.
Worse: They keep that rather quiet. If you run TechTool deluxe, and it fails: It points you to the Techtool site to
"download the TechTool Deluxe software with diagnostic and repair capabilities".
You think "Aha, right, I need an update, or a DMG rather than just the executable".
Download another 1.25Gb.
So you try again: Same thing.
The chiselling little crooks, to quote Ken Livingstone, won't even come out and say "Buy TechTool Pro to fix it". The website as reported above is wrong.
Result: I'm not happy with them. And I'll never buy anything off Micromat.
In the meantime, I've got a bootable backup thanks to CC-Cloner (excellent, I'll send him some money), and I'm waiting until I don't have any critical deadlines to allow myself time to restore a daily bootable backup.
The dodgy files seem to be the Sun Developper Java suite according to CC Cloner.

Records count in Receiver File Adapter

Hi All,
I have a scenario IODC to File. The requirement is to get the total record count in the Trailer record of the Target File .Please help.
Regards,
Kevin

Hello,
The requirement is to get the total record count in the Trailer record of the Target File
In your XML, decide which IDOC field you get your records from and then do a similar mapping
IDOC field -> removeContext -> count -> TrailerRecordfield
Hope this helps,
Mark

Record count in internal table

i want to know record count for the records stored in
internal table.
do we have any system field to display record count?

Hi,
Try this:
Data: count_lines type i.
describe table my_table lines count_lines.
Regards,
Arjan

How to determine the cursor record count before the "open cursor"?

Is it possible to determine the record count of an explicit cursor without running a count()? Say, my cursor definition is something like this,
CURSOR cur_vehicle
IS
SELECT os.order_id, os.order_item, vs.part_id
vs.part_num,
vs.iso_num,
vs.model_yr
vs.dealer_cde,
vs.cust_cde,
px.plant_cd
FROM parts_source vs,
orders_source os,
plant_tbl_crossref px
wHERE os.order_id = vs.order_id
AND vs.part_id = os.part_id
AND vs.plant_cde = px.plant_cde
ORDER BY os.order_id;
I want to log the count of records returned by the above cursor prior to the first fetch, without running a count(1) for the query in cursor select.
I know adding " Count(1) over(order by null) " in the cursor SELECT will bring it. But that does not help me log the record count to some log file or table before opening the cursor for processing.
To conclude, my objective is to update the record count of cursor in some table before processing

sarvan wrote:
Is it possible to determine the record count of an explicit cursor without running a count()?
..snipped..No. The only way to do it correctly is inside that select.
Each select is a consistent read. Which means that if this is done as 2 select statements, the 1st select can see a different version of the data than the 2nd select statement. does. So if you want a count and that to be consistent and on the same version of the data than the select, it has to be done as part of the select.
Also consider what a cursor is. It is not a result set of sorts that is created in memory upfront - with a convenient interface that tells you the size/number of rows of that result set.
A cursor is basically a program that reads database data as input and produce output. A fetch from a cursor is an instruction for this program to execute and output data.
There's no data set that is created by the cursor from which the count can be determined. The cursor program does have state variables - like +%RowCount+ that specifies how many rows the cursor has thus far output. And you need to run that cursor to the end (no more output) in order to determine the total number of rows output by the cursor.

What event should I use to grab the record count of a DataGrid?

I have a "Go" button on a search form. It works correctly, fetching records from a CF data service into a data bound DataGrid. However, using the code shown below, the record count always shows zero. I've tried putting the "..Provider.length" line shown below, into various events on the grid, so that it will always update the count at the correct time, but I get "null" object errors at run time. There seems to be no event that fires "AfterDataLoad".
            protected function btnGo_clickHandler(event:MouseEvent):void
                 getSBJsResult.token = baa_data_svc.getSBJs(cmbSrch.text);
                 tabSbjs.label = 'Subjects: ' + grdSBJs.dataProvider.length;    // This always returns zero. Why?

For example, this doesn't work. The grid is told to loaded data on line 1, but this must just be only a message send to the Flash Player 10, because the processing doesn't stop and wait for the loading of data to complete, it just continues on to line 2, at which point '...Provider.length' is always zero the first time through.   So... the NEXT time the user clicks the Go button, line 2 is processed for the DataGrid which is holding data from the PREVIOUS search, so it updates the tabSbjs.label with the count from the previous search, not the current search. The count of records is always for the previous data set.
            protected function btnGo_clickHandler(event:MouseEvent):void
1               getSBJsResult.token = baa_data_svc.getSBJs(cmbSrch.text); // edtSrch.text
2               tabSbjs.label = 'Subjects: ' + grdSBJs.dataProvider.length;
All I'm trying to do is (which seems like a very difficult thing to do in FB4):
-Display a DataGrid popluated with data records
-Display a count of how many records are in the data grid
If I rely on CF9 functions, which can only return a single value, then I have to make two CF9 functions, with the exact same SQL, one that returns data, and one that returns a count of the records.... which is non-sensicle.
There must be a simple way to do this, but I'm going around in circles.

Problem in getting update records count while executeBatch()

hi,
I have used "Select in Insert" queries for migrating data from one table to another.
like
INSERT INTO TABLE1 (COL1, COL2)
SELECT COL1,COL2,... FROM TABLE2
WHERE COL1 = ... AND COL2 = ...;
Case 1:
I added these statements as addBatch() & at the end i execute method " executeBatch()". It returned the array of integer having record count for each query respectively.
But that count was always be -2 i.e. SUCCESS_NO_INFO.
Case 2:
If i run the same code with executeUpdate() method , it returned me the correct number of records counts that are inserted into the table.
I cudn't able to understand that it is failing for case1.
Can anybody tell the reason for this behaviour .......................
Edited by: user11187328 on Mar 17, 2010 3:45 AM
Edited by: user11187328 on Mar 17, 2010 3:46 AM

hi,
Thanks again for a correct reply but can u also tell me tht which jar i needs to included.
There are so many jar files & should i remove old jar files or jvm auto picks the updated jar file.
Following jar files are shown on the link:::
ojdbc5.jar (1,996,228 bytes) - Classes for use with JDK 1.5. It contains the JDBC driver classes, except classes for NLS support in Oracle Object and Collection types.
ojdbc5_g.jar (3,081,328 bytes) - Same as ojdbc5.jar, except that classes were compiled with "javac -g" and contain tracing code.
ojdbc6.jar (2,111,220 bytes) - Classes for use with JDK 1.6. It contains the JDBC driver classes except classes for NLS support in Oracle Object and Collection types.
ojdbc6_g.jar (3,401,519 bytes) - Same as ojdbc6.jar except compiled with "javac -g" and contains tracing code.
ojdbc5dms.jar (2,429,777 bytes) - Same as ojdbc5.jar, except that it contains instrumentation to support DMS and limited java.util.logging calls.
ojdbc5dms_g.jar (3,101,875 bytes) - Same as ojdbc5_g.jar, except that it contains instrumentation to support DMS.
ojdbc6dms.jar (2,655,741 bytes) - Same as ojdbc6.jar, except that it contains instrumentation to support DMS and limited java.util.logging calls.
ojdbc6dms_g.jar (3,423,263 bytes) - Same as ojdbc6_g.jar except that it contains instrumentation to support DMS.
orai18n.jar (1,656,280 bytes) - NLS classes for use with JDK 1.5, and 1.6. It contains classes for NLS support in Oracle Object and Collection types. This jar file replaces the old nls_charset jar/zip files.
demo.zip (603,363 bytes) - contains sample JDBC programs.

Problem in getting correct update records count while getUpdateCount()

hi,
I have used "Select in Insert" queries for migrating data from one table to another.
like
INSERT INTO TABLE1 (COL1, COL2)
SELECT COL1,COL2,... FROM TABLE2
WHERE COL1 = ... AND COL2 = ...;
Case 1:
I added these statements as addBatch() & at the end i execute method " executeBatch()".
Then i execute
getUpdateCount() method
on that prepareStatement ,but that count was not correct all the time.
Case 2:
If i run the same code with executeUpdate() method , it returned me the correct number of records counts that are inserted into the table.
I cudn't able to understand that it is failing for case1.
Can anybody tell the reason for this behaviour .......................
Edited by: user11187328 on Mar 18, 2010 4:52 AM

hi,
Thanks again for a correct reply but can u also tell me tht which jar i needs to included.
There are so many jar files & should i remove old jar files or jvm auto picks the updated jar file.
Following jar files are shown on the link:::
ojdbc5.jar (1,996,228 bytes) - Classes for use with JDK 1.5. It contains the JDBC driver classes, except classes for NLS support in Oracle Object and Collection types.
ojdbc5_g.jar (3,081,328 bytes) - Same as ojdbc5.jar, except that classes were compiled with "javac -g" and contain tracing code.
ojdbc6.jar (2,111,220 bytes) - Classes for use with JDK 1.6. It contains the JDBC driver classes except classes for NLS support in Oracle Object and Collection types.
ojdbc6_g.jar (3,401,519 bytes) - Same as ojdbc6.jar except compiled with "javac -g" and contains tracing code.
ojdbc5dms.jar (2,429,777 bytes) - Same as ojdbc5.jar, except that it contains instrumentation to support DMS and limited java.util.logging calls.
ojdbc5dms_g.jar (3,101,875 bytes) - Same as ojdbc5_g.jar, except that it contains instrumentation to support DMS.
ojdbc6dms.jar (2,655,741 bytes) - Same as ojdbc6.jar, except that it contains instrumentation to support DMS and limited java.util.logging calls.
ojdbc6dms_g.jar (3,423,263 bytes) - Same as ojdbc6_g.jar except that it contains instrumentation to support DMS.
orai18n.jar (1,656,280 bytes) - NLS classes for use with JDK 1.5, and 1.6. It contains classes for NLS support in Oracle Object and Collection types. This jar file replaces the old nls_charset jar/zip files.
demo.zip (603,363 bytes) - contains sample JDBC programs.

Record Counter in trailer for DMEE 005 Canada

Similar Messages

Maybe you are looking for