Record does not "check in" after workflow is complete

Hi All,
I have built a very simple workflow as below
1. start step
2. process step
3. approve step
4. stop step
in the fourth step that is the stop step i have selected "check in" so that the record automatically check's in after the process is complete,
but the record does not check in and the data manager shows it as in workflow. please help
Thanks in Advance
Sharma.

Hello Abhishek,
Thanks for the reply.
The issue is resolved.
The user had the authorizations and the records were checked out as well.
i was missing the step of "Mark as approved" that was the reason for the records not to check in automatically.
Thanky you again.
Regards,
Sharma

Similar Messages

Portal check out record does not check in when MDM workflow is active

Hi Experts,
We are using portal as front end for the MDM material creation/update.
when a user tries to edit a material via portal, the record is checked out in mdm and once the record update is done and submitted that particular record will be checked in. this is normal process and automatic in nature till date.
However, we have created a simple workflow in mdm, we havent checked out records in start step of workflow.
So it normally executes without check out /in via MDM Workflow.
workflow triggerring action = record import, record update, record add.
when i edit the material vai data manager WF triggers fine and all is well.
However when i edit the material via portal, record is checked out (which is normal) and once record is submitted, the workflow in mdm is triggered successfully.
Workflow ends with all necessary syndication's and validations and ends successfully, But after this the record still remains as checked out? ???
ideally as mentioned above (in bold) once the user completes editing the record and submits it, the record should be checked in, but this is not happening!!!
Please let me know why is this happening.
Please help.
Regards
Eva

Hi Eva,
That is useful.
Analyzing this issue I came across SAP note 1740194-Record remains in exclusive lock after workflow is completed.This was an issue observed in SAP MDM 7.1 SP08.
It gives a workaround -
The workaround is:
The owner of updating has to click on the modified record in Data Manager after workflow completed. The original modified record will be unlocked.
Ofcourse,resolution would require an upgrade.
Thanks,
Ravi

Vl01n for so does not check batch management

batch management on the mm was not initially checked.
was checked after the material was put on the so.
unrestricted batch stock does exist
attempt to vl01n for that line creates a delivery but does not check batch management under material tab
what needs done to get the delivery to inherit the batch management check?

Dear Starz,
I guess according to SAP standard - The indicator cannot be changed if stocks exist in either the current period or in the previous period.
However the same would be applicable as soon as you post the new stock after changing the material master record.
Hope this helps...
Give points if useful...
Thanks,
Jignesh Mehta

ORA-20212: Active audit detail record does not exist

Hi All,
While Executing the process flow using Scheduler,we got this error
"ORA-20212: Active audit detail record does not exist, cannot update audit counts.
ORA-06512: at "XXOWB.WB_RT_MAPAUDIT", line 2173
ORA-06512: at "XXOWB.WB_RT_MAPAUDIT", line 3108
ORA-06512: at "APPS.Test_MAP", line 3304
ORA-06512: at "APPS.Test__MAP", line 9341
ORA-06512: at line 1
I Will test the Mapping my running directly from Control center and then in database.
Cheers
Nawneet

Donot know the exact reason but when check the alert log found the error
ORA-1653: unable to extend table
and after allocating space the error was gone..
Cheers
Nawneet

What do i do if a record does not download, what do i do if a record does not download

what do i do if a record does not download?

Hello David,
I am sure you are eager to download and listen to the album you purchased, and I'm sorry to hear that it isn't downloading.
First, I recommend checking to see if the download was interrupted. You can use the steps in this article:
iTunes: How to resume interrupted iTunes Store downloads
http://support.apple.com/kb/HT1725
If the album does not download after following the steps in that article, I recommend trying to download the album from the list of past purchases. As long as you are signed in with the same Apple ID you used to purchase the album, you will not be charged again.
iTunes 11 for Windows: Download previous purchases from the iTunes Store
http://support.apple.com/kb/PH12491
If you are still not able to download the album, I recommend reporting this issue to the iTunes Store:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/HT1933
Thank you for using Apple Support Communities.
Best,
Sheila M.

Purchase info record does not exists in purchase organization 1000

Hi experts,
          I have created a new enterprise structure in SAP. when i am creating a PO its picking the correct info record, but when i am doing GR, its giving the error as 'purchase info record does not exists in purchase organization 1000". I have maintained everything perfect. the only thing i have changed is I have moved the open and close period from 11-2002 to 12-2008 in MMPV.
         Please give me some suggestions, where it can go wrong.
Thanks & Regards,
Poorna.

Hi Guys,
          Thanks for all yours responses, Actually what deepak said was right, but in my IDES system i am not able to create new entries in assign plant to std purchase org. I found the database view for that, V_001W_E its for table T001W. So i looked into that table i found that std purchase org was given as 1000. i made direct entries in that table, i thought the reason for this may be due to , that i copied plant from 1000. After making entries , i did not got the error message that was i am previously getting.
Thanks & Regards,
Ravi.

Firefox does not start up after an automatic update. Every time i try to open it, it just prompts the Mozilla Crash Reporter.

Firefox does not start up after an automatic update. Every time i try to open it, it just prompts the Mozilla Crash Reporter.
''Add-ons: {972ce4c6-7e08-4474-a285-3208198ce6fd}:3.6.10
BuildID: 20100914125854
CrashTime: 1290192405
EMCheckCompatibility: true
FramePoisonBase: 00000000f0de0000
FramePoisonSize: 65536
InstallTime: 1287124738
ProductName: Firefox
ReleaseChannel: release
SecondsSinceLastCrash: 422
StartupTime: 1290192405
Theme: classic/1.0
Throttleable: 1
Vendor: Mozilla
Version: 3.6.10
This report also contains technical information about the state of the application when it crashed.''
Same thing happens when i click restart.
No difference when i run it in Safe mode. And it won't let me create a new profile either. Is there anyway else i can extract my bookmarks? This is driving me crazy!

Did the crash reporter send any crash reports? 
You can see the crash reports in this folder:
"C:\Users\<user>\AppData\Roaming\Mozilla\Firefox\Crash Reports"
See: http://kb.mozillazine.org/Breakpad
See also [[Firefox crashes when you open it]]
Create a new profile as a test to check if your current profile is causing the problems. 
See [[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting: Make a new profile]] 
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" 
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files) 
See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox 
If that still causes the same problem then do a clean reinstall and remove the Firefox program folder.
* Download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Don't remove personal data when uninstalling.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
See:
* http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

InvalidRecordException: Input record does not have a valid Id.

I am trying to export data from hybris to endeca. I have set up the index schema, index element, cas config, added properties.
I have added queries the index elements but somehow the recordstore are not exporting the data to endeca. When, I checked the recordstore for data, it returned an empty file. I have checked the record store config for data and it shows record.spec available. Not sure why I am getting the InvalidRecordException.
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<recordStoreConfiguration xmlns="http://recordstore.itl.endeca.com/">
<changePropertyNames/>
<idPropertyName>record.spec</idPropertyName>
<jdbmSettings/>
</recordStoreConfiguration>
ERROR [hyend2exportcronjob1360880300110::de.hybris.platform.servicelayer.internal.jalo.ServicelayerJob] (hyend2exportcronjob1360880300110) [EndecaRecordStoreService] Exception during writing records to record store
com.endeca.itl.recordstore.InvalidRecordException: Input record does not have a valid Id.
at org.apache.cxf.jaxws.JaxWsClientProxy.invoke(JaxWsClientProxy.java:141)
at $Proxy146.writeRecords(Unknown Source)
at com.endeca.itl.recordstore.RecordStoreWriter.doFlush(RecordStoreWriter.java:170)
at com.endeca.itl.recordstore.RecordStoreWriter.flush(RecordStoreWriter.java:145)
at com.endeca.itl.recordstore.RecordStoreWriter.close(RecordStoreWriter.java:163)
at de.hybris.platform.hyend2.services.endeca.impl.DefaultEndecaRecordStoreService.writeRecordsToRecordStore(DefaultEndecaRecordStoreService.java:125)
at de.hybris.platform.hyend2.services.endeca.impl.DefaultEndecaRecordStoreService.writeRecords(DefaultEndecaRecordStoreService.java:98)
at de.hybris.platform.hyend2.services.impl.DefaultExportService.exportSchema(DefaultExportService.java:456)
at de.hybris.platform.hyend2.services.impl.DefaultExportService.exportSchema(DefaultExportService.java:210)
at de.hybris.platform.hyend2.services.impl.DefaultExportService.export(DefaultExportService.java:121)
at de.hybris.platform.hyend2.jobs.ExportJob.perform(ExportJob.java:67)
at de.hybris.platform.hyend2.jobs.ExportJob.perform(ExportJob.java:1)
at de.hybris.platform.servicelayer.internal.jalo.ServicelayerJob.performCronJob(ServicelayerJob.java:40)
at de.hybris.platform.cronjob.jalo.Job.execute(Job.java:1294)
at de.hybris.platform.cronjob.jalo.Job.performImpl(Job.java:813)
at de.hybris.platform.cronjob.jalo.Job.access$1(Job.java:772)
at de.hybris.platform.cronjob.jalo.Job$JobRunable.run(Job.java:677)
at de.hybris.platform.util.threadpool.PoolableThread.run(PoolableThread.java:198)

This was due to the dropping of recordstores which were not getting recreated. Using environment parameters (host and port) on the command line to create the recordstore for data resolved the issue.

IPhoto does not start up after upgrading

On my new iMac iPhoto does not start up after migrating. Upgrade from iPhoto 6/Snow Leopard > Lion 10.7.1 with iPhoto 9.1.5. When the conversion is finished I can see the new library, it works allright. And with packet-inspection (or how is that called in English) all maps & data seems to be OK; I can check the seperate pics.
But: iPhoto won't start up a second time (grey screen with infinite spinning wait cursor). The same thing is happening when I add a new library and drop in some pictures.
What can cause this problem?

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

Dbca does not come out after 100%

I have installed and configuredthe Oracle 9i Rel2 on RH Linux 9.
When I followed dbca steps to create a database, it does not come out after reaching 100%. I had to kill the process to end it. What could be reason? Because of this the init<SID> file is also not created.
Please explain
Mehul Trivedi

I have installed Oracle9i on RH9 and I was able to use
the dbca and really If your swap values in the OS are fine
I do know whatelse you can check.
If you want to create a database and the dbca is not
functioning you have another option ( Create it manually )
Chapter 2
Administrator's Guide Contents / Search / Index / PDF
http://download-east.oracle.com/docs/cd/B10501_01/server.920/a96521.pdf
Joel P�rez

T400 does NOT wake up after going to sleep

T400 does not wake up after going into sleep. It goes to sleep ok but everytime wheni try to wake it, it restart the whole system instead of waking up.
I have checked the BIOS Security setting and it already set on Active. All drivers are upto date.
Please help!!
Message Edited by farooqjilani on 03-09-2009 08:23 AM

I have a similar issue with a T400 (xp sp2).
suddenly, it won´t come back from sleep. i have to press & hold the power button to turn off the computer, and then press again to turn it on from scratch.

My ipad screen is black and will not reset and does not come back after restoring, the info is still on internal because i can see it on itunes in the apps catagory it's the display is not working, can see backlight but black...does anyone know how to fix

my ipad screen is black and will not reset and does not come back after restoring, the info is still on internal because i can see it on itunes in the apps catagory it's the display is not working, can see backlight but black...does anyone know how to fix, other than take it to apple.
thanks!

The wish list only works on apps you have to pay for. To get it tap the icon of the app you want to save. After it opens at the upper right corner is a box with a arrow. Tap that then tap add to wish list list in the box that opens.

On my MacBook with Lion Safari does start, does not react immediately after trying to open it. Installing a new Safari does not help. Removing parts of Safari in the Library did not help. Where can I find and remove all components (LastSession ...)?

How can I reset Safari with all components? On my MacBook with Lion, Safari does not start, does not react immediately after trying to open it. Installing a new Safari does not help. Removing parts of Safari in the Library does not help. Where can I find and remove all components as LastSession and TopSites?

The only way to reinstall Safari on a Mac running v10.7 Lion is to restore OS X using OS X Recovery
Instead of restoring OS X in order to reinstall Safari, try troubleshooting extensions.
From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.
If it's not an extensions issue, try troubleshooting third party plug-ins.
Back to Safari > Preferences. This time select the Security tab. Deselect: Allow plug-ins. Quit and relaunch Safari to test.
If that made a difference, instructions for troubleshooting plugins here.
If it's not an extension or plug-in issue, delete the cache.
Open a Finder window. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following
~/Library/Caches/com.apple.Safari/Cache.db
Click Go then move the Cache.db file to the Trash.
Quit and relaunch Safari to test.

HT1339 My ipod was not recognized by itunes and not does not power on after I restarted the ipod service in the Windows admin tools. I cannot restore the ipod since it is not recognized by my PC now. Any suggestions?

My ipod was not recognized by itunes and not does not power on after I restarted the ipod service in the Windows admin tools. I cannot restore the ipod since it is not recognized by my PC now. Any suggestions?

Time to replace it: $49 2nd Gen shuffle at online Apple Store...

PO creation-ME21n-Why SAP does not check company code and Plant relation

Hi All,
Does someone know, why SAP does not check Plant and company code relation at the time of PO creation or how can we put validation between plant and company code at the time of PO creation.
Example: Suppose i have a company 0001 which is assinged to Plant 0001. when i am creating a PO with another company code 0002(Entering at header level-Org, data) and using Plant 0001 at line item level. SAP does not do this validation.
How can we put this check in place?
Thanks in advance.
Deepak

Hello Deepak,
There are three types of purchasing
- Company code specific :You need to assign company code to Pur organization
- Plant specific : You must assign plant to pur organization
- Cross company purchasing: No assignment between company code and pur organization.
In the case 3, the system will not check company code and plant relationship, but it will check plant and pur organization specific.
The following is the copy of sap help text:
You can assign a purchasing organization to one company code. This is company-specific purchasing.
You can assign a purchasing organization to no company code. This purchasing organization can then procure for all plants assigned to it, irrespective of the company code to which the plant belongs.
Since each plant must be assigned to a company code, the company code can be determined via the plant in each procurement transaction, even if the procuring purchasing organization is not assigned to a company code.
A purchasing organization must be assigned to one or more plants. This is plant-specific purchasing.
Now, check your company-code and purchase organization assignment.
Hope this helps.
Regards
Arif Mansuri

Record does not "check in" after workflow is complete

Similar Messages

Maybe you are looking for