Record enable buttons have disappeared from audio tracks

The record enable buttons have disappeared from audio tracks. How do I get them back?

Try control- or rightclicking a Track Header and...

Similar Messages

The red colored "record ready" button has disappeared from my track header area. The other four buttons are showing fine, (input (i), hide (h), mute (m) and solo (s).

The red colored "record ready" button has disappeared from my track header area.
The other four buttons are showing fine, (input (i), hide (h), mute (m) and solo (s).
Can anyone help me with this?
Thanks
Johnny

Ahrenshof: Thank you for your suggestion:
((preferences>audio>devices (re-select your input source) ))
I already had that done IE. I had duet already chosen as input and output etc etc.
The problem seemed to be the issue that was addressed by Eriksimon:
(( ctrl-click the track Header.))
Following that advice gave me a drop down menu which allowed the various buttons to be
checked and unchecked.
Thanks so much for taking the time out to
help with my problem. It seems to me that
this formum is far better equipped to handle
user's problems than any or the options that
are available on the acual Logic help menu.
It appears that Logic has been put
together by techies who, (though they
may be brilliant at computer software issues), then have
virtually no skill or imagination with regards explaining
how to use it, to the actual users.
I have a PhD in Egyptology. I mention this not
because I think it a particularly brilliant acheivement
but just to indicate that I am not a total dummy.
More to the point I find using Logic needlessly tiresome
and the explanations that are given in the "Help" menu
are nothing short of tragic. Perhaps Apple could start to give
out free ropes or razor blades to everyone who buys the program.
Not to say it is not much better that the other junk out there, it is,
the sorry fact is that that is not saying much at all.
I send sincere thanks to all the users out there who support
each other through this forum. johnnyloonybin

Record enable button disappeared Logic Pro X

I have been using Logic Pro X for several months without any problems but now the Record Enable Button has disappeared.
There is a space where it should be. If I choose "Hide Record Enable" the space disappears, but choosing "Show Record Enable" results in only a blank space where R used to be.
I have checked my hardware settings and my audio input appears like it should.
The problem is not appearing on my MacBook so I tried creating a new file and importing it to my desdtop Mac (Mini), but when I did this the Record Enable button promptly disappeared.

Well, yes.. but thats how you are meant to assign/select an Audio device in every version of Logic... going back several major versions now. You had to have done that in Logic Pro 8 or 9 in the past.. You probably just forgot you had to do so initially.
Anyhow...
The problem described in this thread was caused by incompatible drivers and a change made to LPX during an update...
...and was not caused by the OP failing to select the Audio interface correctly in audio prefs in the first place...
Cheers..
Nigel

I have a m-audio producer usb microphone and since the update on Dec. 22, 2013 Logic hasn't been allowing me to record with it. Logic is reading the microphone as the input but the audio tracks don't have the record enable button. What's wrong?

I have a m-audio producer usb microphone and since the update on Dec. 22, 2013 Logic hasn't been allowing me to record with it. Logic is reading the microphone as the input but the audio tracks don't have the record enable button and won't let me select an input for the audio track on the inspector panel. What are some possible solutions.

Certain M-Audio USB devices (along with some other USB2 class compliant devices that don't use drivers) no longer work with Logic Pro X 10.0.5
At this time it is unknown as to why this has happened. Nor is it known if Apple will need to fix it or if it is up to the Developers of said USB2 devices to remedy the problem.
In the mean time, assuming you made/could make backups prior to updating to 10.0.5.... the solution is to roll back to LPX 10.0.4...

"record enable" buttons not showing up in Garage Band 10.0.3 (I have selected "show record enable"- a space in the track header opens up, but the button is not present. Same with "input moniter".

"record enable" buttons not showing up in Garage Band 10.0.3 (I have selected "show record enable"- a space in the track header opens up, but the button is not present. Same with "input monitor".

Look at all the posts in the forum from users with similar problems, it happened with the last Logic update.

Record enable buttons missing on Audio track headers!?

They were there previously. There is even an empty space for them which disappears when I uncheck the record enable button when I go to configure track headers window. If this has happened to anyone, please tell me how to get them back. This now on all projects (9.01).
Thanks, Confused

Yep, this has changed in L9, as you can now choose different devices for In- and Output you will miss the recording buttons if you don't have an Input selected.

When I record an audio track, there is a waveform. When I stop recording, the waveform disappears and becomes a straight line. It also disappears from the track edit window. But the sound is there. How can I stop the waveform from disappearing?

When I record an audio track using Logic Pro X, there is a visible waveform which appears as I record. When I stop recording, the waveform disappears and becomes a straight line. It also disappears from the track edit window. But the sound is still there. How can I stop the waveform from disappearing? And can I do something to view it after it has disappeared? Anyone know the anser?

In Logic:
Preferences/Audio Set Recording Delay to 0 <zero>
This should always be set to zero unless a specific set of circumstances exist and you're audio drivers do not report position correctly.
On occasion, usually when importing a Logic 9 project, Logic-X randomly changes this to a negative/positive number. It's actually a bug in Logic, as it should always display the waveform.

From my safari browser, forward-backward buttons have disappeared. How to restore!

From my safari browser, forward and backward buttons have disappeared.
How do I restore.
MKR

From your Safari menu bar top of your screen click View > Customize Toolbar
Drag up the default toolbar or as individual objexts.

I have iphone 4 ios4.3.5. the facetime button has disappeared from all the contacts?

I have iphone 4 ios4.3.5. the facetime button has disappeared from all the contacts? What to do?

Depending on where you are located at, some governments have required Apple to disable the Facetime ability in their countries.

No record enable button

Hi, there is no Record Enable button between the Mute and Freeze button. I can't for the life of me remember how to put it there and can't find it in the reference guide or within the forum. How do I make it show up in the Track List?
Many thanks, Ros

Thanks a million Steve. I'm not a Garage Band user, but today I was able to record directly into it using the Built-in Input. It automatically set the source as "Stereo 1/2 (Built in input)", so at least I know that the computer Audio Input is working.
I don't know how to load it as a Logic project, but I saved it as a "Compact Project" to export it to iTunes. Then I imported the audio file into LE. I have the audio file, but not the Record Enable button.
So finally, I re-installed LE....guess what? Still no Record Enable button, not even in the Tutorial song. I used the Logic Set-up assistant again and chose Built-in input as the driver, rebooted. It tells me it will use the Built-in Inputs as it starts up. It shows Built-in input as the driver in the Core Audio LE preferences, but shows No Input in the arrange window when the Audio track is selected. If I touch Built-in input (as the driver) in the Core audio LE preferences, it disappears from the list of drivers (the only other one is Built-in Output) and asks me to reboot to launch CoreAudio, then the whole process starts over again.
I did a fairly extensive search in the forum (several pages) before posting my question, but I'll go back through it again.
The LE7 Manual just states that you should click the record Enable button on the Arrange channel strip. The problem is, it ain't there!
I really appreciate your assistance and calling up your friend all.
Thanks, Ros

10.0.5 update has removed "record enable" button

Ever since the update I can no longer record any audio with my blue microphones yeti mic. The "record enable" button that is usually visible in the track header area has disappeared even when enabled in track header configuration. I have also messed with the audio preferences settings but cannot get the button to show up. Please help report this bug to apple using the following link!
https://www.apple.com/feedback/logic-pro.html
Thanks!

Update: Apparently both M-Audio and Alesis have gone 'missing in action' over this issue on the net/forums.. but here are the phone numbers to contact M-Audio support directly for anyone wishing to do so..
M-Audio USA & Canada
Phone: 401-658-5765
Hours: Monday - Friday 8:30AM - 6:30PM EST
M-Audio Germany
Phone: +49-2154-81299-20
Hours: Monday - Friday 9:00AM - 5:00PM CET
M-Audio UK
Phone: 44(0)1252-896040
Hours: Monday - Friday 9:00AM - 6:00PM BST
M-Audio Brazil
Phone: +5511 - 3222-6476
Hours: Monday - Friday 9:00AM - 6:00PM BRT

Record enable button on garageband

unable to find the record enable button in the track header on garageband

Same problem. I have an Onyx 1620i mixer, late-2013 Macbook Pro.
Core Audio on the Macbook recognizes the Onyx and its multiple tracks.
When I create a track in Garageband (using Microphone/Line option) then during setup Garageband asks me to select which of the 16 channels on the Onyx I want the track to record. The track then shows input level bouncing around as sounds are made on a mic connected to the mixer on the appropriate channel.
Everything seems to be working fine! Except no Record Enable button appears on the track. Can't record the audio that appears to be coming into the computer just fine.
I am aware that there are issues with Mackie mixers after OSX 10.7.1 (or 10.8 with some models). Mackie hasn't bothered to keep up to Mavericks. However I didn't think the issue was "doesn't work at all", but that there were some latecy problems that can cause hiccups.
So, despite appearances Garageband can't record from this device? Or am I missing something else to record-enable a track?
Thanks in advance for any advice about resolving this, or even advice about an excellent Mavericks-capable device that will allow me to mix about 16 external inputs into the Macbook Pro.

Record Enable Button

I've followed the manual, but I still can't get the record enable button to appear on my audio tracks.Can you help?

What do you see on your audio tracks?

HT204406 I did a sync in itunes and now almost all of my songs have disappeared from my itunes library. I'm sure they're in the cloud, but what if I want to play one on my computer? How do I find them?

I did a sync in itunes and now almost all of my songs have disappeared from my itunes library. I'm sure they're in the cloud, but what if I want to play one on my computer? How do I find them?

- Try resetting the iPod. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Next, restore from backup.

Last pass password manager and auto form filler have disappeared from my tool bar. How do I get them back or do I have to start all over again.

I am using Windows Vista. Both LastPass and the auto form filler have disappeared from my toolbar. Is there a way to retrieve this information or do I need to start again?

Do those extensions still show as installed in Tools > Add-ons > Extensions?
If not then it is possible that there is a problem with the file(s) that store the extensions registry.
Delete the files extensions.* (e.g. extensions.sqlite, extensions.ini, extensions.cache) and compatibility.ini in the Firefox profile folder to reset the extensions registry.
*https://support.mozilla.org/kb/Profiles
New files will be created when required.
See "Corrupt extension files":
*http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
*https://support.mozilla.org/kb/Unable+to+install+add-ons
If you see disabled, not compatible, extensions in "Tools > Add-ons > Extensions" then click the Tools button at the left side of the Search Bar (or click the "Find Updates" button in older Firefox versions) to check if there is a compatibility update available.
You can also check for problems with the localstore.rdf file if toolbar buttons are missing.
*http://kb.mozillazine.org/Corrupt_localstore.rdf

Record enable buttons have disappeared from audio tracks

Similar Messages

Maybe you are looking for