Record enable more than 1 software instrument?

I don't currently have Logic.I used to use it on PC(4.5)
I was wondering if it was possible to record enable more than 1 software instrument.What I would like to do is send midi from Live to Logic via IAC bus triggering Logic synths.Basically using Logic as multitimbral tone module. I like Live for working up arrangements but would like to use Logic for mixing/editing.
Macbook Pro 1.83 Mac OS X (10.4.6)

Yes, in Logic Pro 7 you can record-enable multiple software instrument tracks.
I'm using a similar setup with IAC.
IMPORTANT:
If the tracks are assigned to different midi channels, make sure to
check 'Auto Demix by channel' in File > Song Settings > Recording...
G4/1.2GHz Mac OS X (10.4.6) Logic Pro & Express

Similar Messages

MORE THAN 8 REAL INSTRUMENTS

How can I record more than 8 real instruments in a song in GarageBand 3? And does GarageBand '08 allow me to record more than 8 real instruments is a song if there is no way to do it in GarageBand 3?

http://www.bulletsandbones.com/GB/GBFAQ.html#maxnumrecordabletracks

Enable more than two concurrent sessions in Server 2012 r2

Hello,
I have setup RDS on Server 2012 R2 with the following roles: (RD Connection Broker, RD Session Host, RD Gateway, RD Licensing, RD Web Access). My sole purpose for this setup was to enable this server and only this server to allow more than 2
concurrent RDP connections.
Here is some background information:
1. I will not be using RemoteApps or the Web access, I only only need to RDP into this server with more than 2 concurrent connections.
2. The licensing server is activated and I have a 50 user CAL installed on it. It has issued licenses to 3 users that have logged into the server while I was looking at the Web site features. So I know the licensing is working properly.
3. This server does reside in a domain but I'm looking to have everything self contained on just the one box. I do not want to put anything on my domain controller or a separate machine.
4. Everything looks to be fully configured in all of the roles. I have no warnings about things not being configured correctly.
5. When I attempt to login with a 3rd user to this system, it still prompts to have me remove one of the previous 2 sessions.
I know I must be looking right past the setting or it is in a very convoluted space, but how do I enable this server to allow more than 2 RDP sessions? I've made the change in group policy for (Administrative Templates\Windows Components\Remote Desktop
Services\Remote Desktop Session Host\Connections\Limit number of connections) to 50 but this still not seem to correct the problem.
Thanks for any answers you can provide,
Fred Levario

Hi Fred,
Thank you for posting in Windows Server Forum.
Are you working with Domain or Workgroup environment?
Because from your description seems you want everything on single server. To enable more than 2 RDP session for your server we need to Add RD Session Host and RD Licensing Role Services, configure the RD Licensing mode, and licensing server name in the local
group policy, Activate the RD Licensing server and install RDS CALs using RD Licensing Manager.
You can configure the Licensing mode and licensing server through GPO as per below path.
Computer Configuration\ Administrative Templates\ Windows Components\ Remote Desktop Services\ Remote Desktop Session Host\ Licensing
Use the specified Remote Desktop license servers - Provide the FQDN of the license servers to use
Set the Remote Desktop licensing mode - Specify the ‘per user’ or ‘per device’ licensing types
More information.
RD Licensing Configuration on Windows Server 2012
http://blogs.technet.com/b/askperf/archive/2013/09/20/rd-licensing-configuration-on-windows-server-2012.aspx
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support

Is there a way to enable & configure Volume Discounts via the Product Import Spreadsheet? Is there a way to enable more than 2 Quantity Thresholds?

Is there a way to enable & configure Volume Discounts via the Product Import Spreadsheet? Is there a way to enable more than 2 Quantity Thresholds?

Hi Michael,
You can set the thresholds via an import file. The easiest way to do this (and this goes for all importable data, webapps included, 301 redirects and so on) is this:
1. go into the Admin and create a single item, in you case create a test product and set the thresholds
2. export that data - in your case export the product list
3. take a look at how the data looks like in the export file so you can get an idea of how the format should be like in the import file
Unfortunately you cannot set more than 2 thresholds, that is not possible at the moment.
Thanks,
Mihai

Can i record with more than one audio interface

I need to record 16 tracks, I have two different audio iterface, in GarageBand i can only find one of them, if i go to prefrenses-audio, I can set any of them as my audio interface, but only one at the time.
Any tips to how I can use bouth simultanious? Cubase, Logic mabye, GarageBand no can do? :-)

josteinfromoslo wrote:
can i record with more than one audio interface
yes, create an aggregate device:
http://www.bulletsandbones.com/GB/Tutorials.html#allaboutaggregatedevices
(Let the page FULLY load. The link to your answer is at the top of your screen)
josteinfromoslo wrote:
I need to record 16 tracks
GB can only record 8 tracks at a time, however that is 16 channels, so with some extra effort you can get the outcome you desire, see the second tip here:
http://www.bulletsandbones.com/GB/TricksHacks.html

Just want to enable more than 2 concurrent RDP on Server 2012

All I want to do to enable more than two concurrent RDP connections to some of my Server 2012. And that requirement is at this moment for some domain users (for 15 users out of 300 users), I don’t want to publish any remote apps or give user a web
link to logon. I just want user to do RDP from local desktop like they are doing now.
Honestly speaking, when I read this, it confuse me well enough as I don’t understand RDS well.
http://technet.microsoft.com/en-us/library/dd378949(v=ws.10).aspx
However when I see lots of TechNet forums, it just confuse me more
Currently I have Terminal Server licencing server for 2008R2 and I understand that I can’t use this licencing server due to version incapability
http://social.technet.microsoft.com/wiki/contents/articles/14988.rds-and-ts-cal-interoperability-matrix.aspx
I would like to know what do from start to finish step by step
So what I understood that I will need to
1
Commission a new 2012 R2 server for RDS Service deployment
2
Deploy RDS 2012 Services
on the new server
3
Activate Licencing service on the new server
4
On this server, install User CALs on the licencing server and then
Manage RDS CAL for 15 Users by RD Licencing Manager.
Questions
Do I have to activate/install anything on the 2012 servers, where I want to more than two concurrent RDP connection
2. As in my production environment I have Terminal services 2008 working, will the new version of terminal service run side by side or I will need to migrate all the older version of licences/services to the newer version?
3. Is there any risk of creating disruption/trouble on the existing terminal services infrastructure?
If so what are they and how to manage those?
4. The new RDS service deployment has lots of functions, like RDCB, RDWA,RDSH and in addition RDGW, RDVH and RDLI, not sure, which I need to configure.
I understood that I just need to activate and configure RDLI. Did I understand correctly or I need to configure other thinks as well.

Hi,
Thank you for posting in Windows Server Forum.
From your comment, it’s clear that you need more than 2 remote session in your environment and you need to install and activate the RD License server\CAL as you have listed. Now what you can do is, on server 2012 R2 you can act as RD License server and on server
2012 you can just install RDSH role so that you can have more than 2 connection for your environment.
From server 2012\R2 we can manage all the server with RDCB role as middle-man and can install RDSH role on other server and point finally to RD License server so that we can get available CAL for use.
The old environment will run side-by side but as per my suggestion I would say that you migrate all your old to new one so you can enjoy all new feature and can maintain from single point.
In regards to your last question, it depends on your requirement that what you want to use. You can refer following thread for information.
How to set up an clasic TS-desktop with Windows 2012 (R2)?
https://social.technet.microsoft.com/Forums/windowsserver/en-US/894e3b5d-b424-4817-8185-532015817379/how-to-set-up-an-clasic-tsdesktop-with-windows-2012-r2?forum=winserverTS
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support

Query to find records with more than 2 decimal places

I have written the below query to find records with more than 2 decimal places, but it is returning records with decimal places 1 & 2.
The datatype of the AMT column is NUMBER (without any precision).
SELECT amt FROM amount_table
WHERE substr(amt, instr(amt, '.')) LIKE '.%'
       AND length(substr(amt, instr(amt, '.') + 1)) > 2Output:-
AMT
*41591.1*
*275684.82*
*64491.59*
*3320.01*
*6273.68*
*27814.18*
*30326.79*
131.8413635
162.5352898
208.5203816
8863.314632
22551.27856
74.716992
890.0158441
2622.299682
831.6683841
*1743.14*
2328.195877
3132.453438
5159.827334
3.236234727
37.784
Thanks

Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
create table amount_table
LINE_NUMBER        NUMBER not null,
FEE_AMT            NUMBER not null
insert into amount_table (LINE_NUMBER, FEE_AMT)
values (60208, 41591.1);
insert into amount_table (LINE_NUMBER, FEE_AMT)
values (60213, 275684.82);
insert into amount_table (LINE_NUMBER, FEE_AMT)
values (60238, 64491.59);
insert into amount_table (LINE_NUMBER, FEE_AMT)
values (63026, 3320.01);
insert into amount_table (LINE_NUMBER, FEE_AMT)
values (59906, 6273.68);
insert into amount_table (LINE_NUMBER, FEE_AMT)
values (83111, 27814.18);
insert into amount_table (LINE_NUMBER, FEE_AMT)
values (83114, 30326.79);
insert into amount_table (LINE_NUMBER, FEE_AMT)
values (2112395, 131.8413634682);
insert into amount_table (LINE_NUMBER, FEE_AMT)
values (2112399, 162.5352898104);
insert into amount_table (LINE_NUMBER, FEE_AMT)
values (2112402, 208.5203815738);
insert into amount_table (LINE_NUMBER, FEE_AMT)
values (2112403, 8863.3146321954);
insert into amount_table (LINE_NUMBER, FEE_AMT)
values (2112406, 22551.2785551322);
insert into amount_table (LINE_NUMBER, FEE_AMT)
values (2112407, 74.716992);
insert into amount_table (LINE_NUMBER, FEE_AMT)
values (2112410, 890.015844079);
insert into amount_table (LINE_NUMBER, FEE_AMT)
values (2112411, 2622.2996817048);
insert into amount_table (LINE_NUMBER, FEE_AMT)
values (2112414, 831.6683840698);
insert into amount_table (LINE_NUMBER, FEE_AMT)
values (2112415, 1743.14);
insert into amount_table (LINE_NUMBER, FEE_AMT)
values (2112418, 2328.1958771886);
insert into amount_table (LINE_NUMBER, FEE_AMT)
values (2112419, 3132.4534379886);
insert into amount_table (LINE_NUMBER, FEE_AMT)
values (2112422, 5159.8273341686);
insert into amount_table (LINE_NUMBER, FEE_AMT)
values (2112423, 3.2362347266);
insert into amount_table (LINE_NUMBER, FEE_AMT)
values (2112426, 37.784);
insert into amount_table (LINE_NUMBER, FEE_AMT)
values (2112427, 198.7423503696);
insert into amount_table (LINE_NUMBER, FEE_AMT)
values (2112430, 0.7220848332);
insert into amount_table (LINE_NUMBER, FEE_AMT)
values (2112433, 12.4149375254);

How do you enable more than one track at a time?

Couldn't find it in the help portion of the program. I am beginning to believe I have an incomplete help document. Anyway, I want to record more than one track at a time, for example vocals and guitar, while being able to monitor them. Thanks. btw why is this forum so slow? It like totally runs fine till I sign in to my user account. Then it's as slow as a cyber snail.

Okay, I will try that. I have one last question pertaining to this. Will this work if I am using a condenser mic on phantom power through a midi device while plugging the guitar through the same midi-device? I will try a few things either way but I thought I might ask before hand.

View more than one audio instrument midi window at same time Logic 7

Hello,
Is it possible to open up more than one audio inst midi window at the same time?
It would save me so much time if I could view what is going on ie on the guitar & piano tracks on 2 separate tracks at the same time.
I know it is possible to double click on the grid of an audio inst midi window to view all midi in one song at the same time but because I have a lot of audio insts in my songs it gets really confusing. It would be ideal if I could pick and choose specifically which audio inst tracks are displayed within the same window when doing the double click thing or be able to view 2 tracks at once.
Thanks in advance.

Are you refering on how to be able to view the Matrix Editor/Piano roll of 2 Audio instrument tracks in one window?
A

Requirement to enable more than two concurrent RDP sessions on multiple Windows Server 2012

I have an existing Remote desktop licensing server, which has users CALs for server 2008. Now I have some windows server 2012 R2, where more than 2 concurrent RDP connections are required.
What I understand that I will need to install RDS server roes on all my Widows Server 2012 and I will need to have at least one RD licensing server to install RDS CALS, that’s all.
If it is correct, the questions is : Can I use my existing license server to add my newly purchased version 2012 RDS user CALs or I will need a new licensing server?
If it is not correct, then what else I need
I appreciate your detail step by step
Thanks

Thanks the for steps, provided,
So in short,
I will need a Windows 2012 Server to install RSD 2012 licencing server to setup my newly purchased X number of RDS 2012 user CALs.
As I just want more than 2 concurrent RDP connection to happen on some Windows 2012 server, I will require to select “Role-Based or feature-based installation and ONLY will enable Remote Desktop Licensing Role and Demote Desktop Session
Host.
I will need to add RD Licencing and add the server 2012 servers; I want more than 2 concurrent connections to happen.
I will need to enable RD Licensing mode as per user
Question:
1. What I need to enable on those servers, where I want concurrent RPD connection to happen
2. In which stage and where I will enable my users CALs, I purchased?
3. Do I have to install RD Session Host role service on the servers, where more than two RPD users will connect at the same time?
I am also in dark, how my user will connect those servers, with RDP connection or with RD Web Access.
All I want to do is to enable more then 2 concurrent connection to some Windows Server 2012 R2. I have already purchased some RDS 2012 R2 Users CAL

Unable to use the recording port more than once at a ti

Greets. I'm in a clan that uses Ventrilo for their Battlefield 2 games, and that's all fine and dandy...Love Ventrilo... Though, I am unable to talk in BF2 -and- Ventrilo at the same time. Everyone else in my clan can talk on BF2 and Ventrilo at the same time.Here's some examples so hopefully someone can help:Scenario )When I open Ventrilo first, and launch BF2, all my audio options for microphone are greyed out and set to 0%.Scenario 2)When I open BF2 first and launch Ventrilo, Ventrilo gives me an error about the <SPAN class=highlight>recording port already being in use or something weird like that.Scenario 3)When I open FRAPS first (with <SPAN class=highlight>recording sound enabled), then launch Ventrilo, Ventrilo gives me the same error. Same with BF2 when it comes second, all my options are greyed out.Would installing my sound card for my motherboard work, as long as I set the correct <SPAN class=highlight>recording device? I don't want to do that, because I want to use my SB Li've! instead. Does anyone have the same problem?
Here is my DxDiag info:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>
-------------Sound Devices------------- Description: SB Li've! Audio [D000] Default Sound Playback: Yes Default Voice Playback: Yes Hardware ID: PCI\VEN_02&DEV_0002&SUBSYS_00A02&REV_0A Manufacturer ID: Product ID: 00 Type: WDM Driver Name: ctaud2k.sys Driver Version: 5.2.000.0296 (English) Driver Attributes: Final Retail WHQL Logo'd: n/a Date and Size: 9/8/2003 9:47:22, 496800 bytes Other Files: Driver Provider: Creative HW Accel Level: Standard Cap Flags: 0x0 Min/Max Sample Rate: 0, 0Static/Strm HW Mix Bufs: 0, 0 Static/Strm HW 3D Bufs: 0, 0 HW Memory: 0 Voice Management: No EAX(tm) 2.0 Listen/Src: No, No I3DL2(tm) Listen/Src: No, NoSensaura(tm) ZoomFX(tm): No Registry: OK Sound Test Result: Not run
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>
Earlier this afternoon, I started a cleansweep of my entire system with entries in the registry pointing to anything having to do with SB Li've!. I've got rid of -everything- except for one thing that's really bugging me:In the Control Panel, there's an AudioHQ icon, and when I double-click it, nothing happens... I don't know how to get rid of control panel icons, but considering that's still in there, makes me wonder if there is still something lingering from my last installation.
Now, you're all going to laugh at me for this one, but I've been through two major upgrades (mobo, CPU, sound card, etc.) without formatting. I've been meaning to do this, but I hate formatting, because then it takes like a week to get the computer running the way you want it to.
While uninstalling all my sound drivers, I decided to go into the add remove programs to uninstall some old crap I never used. I saw two enries....BF2, and BF2 demo... Thinking of how I don't play the demo anymore, I will uninstall the demo- 'cept it uninstalled the entire BF2 retail game. Sooooo.....My way to test this isn't even installed, but it seems to be working all right when I launch FRAPS and Ventrilo at the same time.
But then it started to get strange...
When prompted at Windows startup to install new hardware, I had inserted the SB Li've! driver disk and tried to run setup.exe - It says:<IMG alt="" src="http://mywebpages.comcast.net/jaldarith/tw/error.gif" border=0>So, on the New Hardware Installation, I had it automatically search for the drivers by CD-ROM, and it found them in the Drivers/audio/win2k folder (Running Windows 2K SP 4), and seemed to install them just fine. After they installed, I heard some sound, thinking everything went smoothly.Now I try to install the upgraded drivers I downloaded from Creative's website:<IMG alt="" src="http://mywebpages.comcast.net/jaldarith/tw/error.gif" border=0>So I check out my device manager:<IMG alt="" src="http://mywebpages.comcast.net/jaldarith/tw/devicemanager.gif" border=0>Thinking I was able to run FRAPS and Ventrilo at the same time, I tried to load Battlefield 2 and Ventrilo at the same time and got this error:
<IMG alt="" src="http://mywebpages.comcast.net/jaldarith/tw/input.gif" border=0>
So I knew it was hopeless.
Then I popped in the SB Li've! CD again and it auto-loaded with the driver installation program, and I selected the typical installation, thinking I may have missed something doing a custom in the past.
Now my device manager shows:
- Creative Game Port
- Creative SB Li've! series
But, it gets strange again. After installing the factory drivers from the CD and then trying to install the updated drivers from Creative's website, I get the same error I got above:
<IMG alt="" src="http://mywebpages.comcast.net/jaldarith/tw/error.gif" border=0>
At this point, I am extremely stuck. Every one of my friends can play Battlefield 2 and have Ventrilo loaded at the same time, and still be able to talk through each program's independent voice over IP.
Is my sound card even able to do such a thing?Message Edited by Jaldarith on 08-23-2005 05:37 PM

Just checked the model of card youre using by Hardware ID
PCI\VEN_02&DEV_0002&SUBSYS_00A02&REV_0A = SB0220 SBLi've! 5. Digital,
and I think if this is correct, you'll may find some other frustrationed owners asking the
same question you have.
Have you tried these drivers
and/or
these drivers
About this issue you and the others are having:
[url="http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=4670" target=_blank>See this thread[/url]
BTW:
You perhaps can install Audigy 2 drivers and software to your card. Here are the instructions how to do it.
It's quite easy process. Download Audigy driver/software package (~20MB) (link is there), extract it into some directory. Download the patch (link is on Automatic Method sentence)and follow instructions how to patch the instalation package. Then installation process. I've modded my Audigy 2 to Audigy 2 Zs using a similiar method and everyting else, but GraphicMixer, works great.
.jtpMessage Edited by jutapa on 08-24-2005 06:38 AM

How do I record for more than 15 minutes at a time?

I notice that when I start recording there is a 15 minute countdown and then the application starts making overviews of each track and stops recording. I want to be able to record a live 2 hour concert with Logic. Please tell me there is a way to extend a recording beyond 15 minutes. If it can't be done I am going to kill a saleman at Guitar Center for selling me this instead of the ProTools system I was going to buy.

LOL me 2! But Donald's not wrong, is he?
Sometimes I set my record limit deliberately to a low number (like 4 minutes on a 3.5 minute tune) so that I can walk away, let Logic do it's thing (like record an external MIDI part) and go get a cup of coffee or something in the meantime. When I come back I trim the part (key commands, yay!) and I'm good to go. Sometimes I feel it's worth the tiny bit of extra time it takes me to trim the part after the fact than babysit a part as it's going down.
Kenneth, I'm really sorry to hear that you may have lost a gig because of this situation.

How to retrieve unique records with more than one column

I have a table sps_prod as described below -
POGNAME VARCHAR2(1500)
INDEX#VERSION VARCHAR2(200)
POG_MODEL_STATUS VARCHAR2(100)
POG_LAYOUT_TYPE VARCHAR2(500)
POG_MARKET_SPECIFIC VARCHAR2(500)
POG_CONTACT_NUMBER VARCHAR2(100)
AREA_SUPPORTED VARCHAR2(500)
POG_COMMENTS VARCHAR2(1500)
POG_FOOTER_COMMENTS VARCHAR2(1500)
POG_ELECTRICAL_LIST_1 VARCHAR2(1500)
POG_ELECTRICAL_LIST_2 VARCHAR2(1500)
POG_CARPENTRY_1 VARCHAR2(1500)
POG_CARPENTRY_2 VARCHAR2(1500)
INSTALLATION_INSTRUCTION_1 VARCHAR2(1500)
INSTALLATION_INSTRUCTION_2 VARCHAR2(1500)
FIXTURE_REORDER_NUMBER VARCHAR2(200)
FIXTURE_ID VARCHAR2(200)
FIXTURE_NAME VARCHAR2(500)
FIXTURE_IMAGE VARCHAR2(500)
PART_REORDER_NUMBER_9 VARCHAR2(500)
PART_FIXTURE_ID_9 VARCHAR2(500)
PART_FIXTURE_NAME_9 VARCHAR2(500)
PART_FIXTURE_IMAGE_9 VARCHAR2(500)
UPC VARCHAR2(50)
ITEM_NUMBER VARCHAR2(50)
DESCRIPTION VARCHAR2(700)
MERCH_TYPE VARCHAR2(20)
HEIGHT VARCHAR2(100)
WIDTH VARCHAR2(100)
DEPTH VARCHAR2(100)
CREATE_TS DATE
There are 4 millions records in it and many with the same combination of POGName,Index#Version,POG_Model_Status,POG_Layout_Type,POG_Market_Specific, POG_Contact_Number and Fixture_Name. How do I retrive records with all the columns above but with unique fixture_name and reorder_number combination. There are no keys defined on the table.
I guess this is a simple problem but the fact that I am trying to retrieve all the columns is stumbling me.
Thanks in advance.

Hi,
Sanders_2503 wrote:
... There are 4 millions records in it and many with the same combination of POGName,Index#Version,POG_Model_Status,POG_Layout_Type,POG_Market_Specific, POG_Contact_Number and Fixture_Name. How do I retrive records with all the columns above but with unique fixture_name and reorder_number combination. I don't see a column called reorder_number. Do you mean fixture_reorder_number or part_reorder_number_9?
So you want only one row for each distinct combination of fixture_name and some other column (I'll assume that's fixture_reorder_number). Does it matter which row? They won't necessarily have the same values for the other columns.
The query below returns the one with the first pogname (in sort order):
WITH     got_r_num     AS
     SELECT pogname, index#version, pog_model_status, pog_layout_type
     ,     pog_market_specific, pog_contact_number, fixture_name
     ,     ROW_NUMBER () OVER ( PARTITION BY fixture_name
                               ,                    fixture_reorder_number
                         ORDER BY        pogname
                       )         AS r_num
     FROM    sps_prod
SELECT pogname, index#version, pog_model_status, pog_layout_type
,     pog_market_specific, pog_contact_number, fixture_name
FROM     got_r_num
WHERE     r_num     = 1
;If there happens to be a tie (that is, two or more rows with the same fixture_name, fixture_number, and first pogname) then one of the will be chosen arbitrarily.
Instead of "ORDER BY pogname", you can ORDER BY any other columns or expressions, but you must have an analytic ORDER BY clause. You can make it "ORDER BY NULL" if you really want to pcik an arbitrary row.
I hope this answers your question.
If not, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only), and also post the results you want from that data (or a couple of examples of acceptable results).
Explain, using specific examples, how you get those results from that data.
Always say which version of Oracle you're using.

*** I need to pull back just one record when more than one is listed.... **

I have two (or more sometimes), there is a field called POC_type and then the POC_name, the POC_Name is different, but the rest of the records are the same, I only want to pull back the first record so I onlist one POC_Type, Name, ...
Below is the code I have right nwo, but like I said it is pulling back multiples becase they have been entered into the systme twice (because of the diff POCs)...
select distinct m1.*
from report_surv_ques_poc m1,
(select investment_id, investment_acronym, investment_name, count(*)
from mv_surv_ques_poc
where poc_type = 'Program Manager'
and poc_status = 1
group by investment_id, investment_acronym, investment_name
having count(*) > 1) m2
where m1.investment_id = m2.investment_id
and m1.poc_type = 'Program Manager'
and m1.poc_status = 1
--and m1.investment_id = 14003
order by m1.investment_id

Thanks...
I am using 10g.
My code is now like...
select distinct m1.*
from report_surv_ques_poc m1,
(select investment_id, investment_acronym, investment_name, count(*)
from mv_surv_ques_poc
where poc_type = 'Program Manager'
and poc_status = 1
group by investment_id, investment_acronym, investment_name
having count(*) > 1) m2
where m1.investment_id = m2.investment_id
and m1.poc_type = 'Program Manager'
and m1.poc_status = 1
and m1.survey_id IN (67201, 67208)
order by m1.survey_idshould it be like:
WITH get_rows AS
   SELECT DISTICT ml.* ROW_NUMBER () OVER (ORDER BY m1.investment_id) AS rno
   FROM from report_surv_ques_poc m1,
     (select investment_id, investment_acronym, investment_name, count(*)
        from mv_surv_ques_poc
      where poc_type = 'Program Manager'
        and poc_status = 1
   group by investment_id, investment_acronym, investment_name
having count(*) > 1) m2
where m1.investment_id = m2.investment_id
and m1.poc_type = 'Program Manager'
and m1.poc_status = 1
) SELECT * FROM get_rows WHERE rno =1;cause that is not working ... I am sure I have something wrong....
Kipp

Get distinct records if more than one select column

Hi,
I have a table .
ParentId
refid
TaskNo
[TaskOwner]
[UpdatedBy]
Remarks
Description
100
NULL
100
user2
user2
hi
hi
100
100
100.1
user1
user1
this
this
100
100.2
100.2.1
user2
user1
is
is
101
NULL
101
user1
user2
the
the
102
102
102.1
user2
user2
rem
desc
103
103.1
103.1.2
user1
user1
rem1
desc1
Previously I able to show parentid where refid is null , but now I would like to show 102,103 values also.
Desired result :
ParentId
refid
TaskNo
[TaskOwner]
[UpdatedBy]
Remarks
Description
100
NULL
100
user2
user2
hi
hi
101
NULL
101
user1
user2
the
the
102
102
102.1
user2
user2
rem
desc
103
103.1
103.1.2
user1
user1
rem1
desc1
Please help me to write query..
Thank you.

Thank you Visakh16..
I got solution ..
seq=4 for the record is nothing but sql is partitioning records first and filtering .
If i move the filter inside and working is fine..
SELECT Seq,ParentId,refid,TaskNo,TaskOwner,UpdatedBy,Remarks
FROM
SELECT *,ROW_NUMBER() OVER (PARTITION BY ParentId ORDER BY refid) AS Seq
FROM [t_TaskMaster] WHERE STATUS NOT IN ('Deleted', 'Completed', 'Closed') AND [TaskOwner] = @UserName
AND UpdatedBy <> @UserName
)t
WHERE Seq=1
Filter should be inside only
As ROW_NUMBER logic should be applied only after filtering. otherwise you'll miss required records
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Record enable more than 1 software instrument?

Similar Messages

Maybe you are looking for