Record File in Window Server with RFC to File Interface

Hi ALL,
I´m with problem to record files in Windows Server through RFC to File Interface.
Tried to record in my local machine (C:TEMP), without success.
Can someone help me?
Tks.
Rodrigo

Then Pooja,
It don´t message with error.
In SXI_MONITOR display with sucess but not record file in windows directory...
Tks

Similar Messages

Replacing a windows server with a Mac server

Hi all,
So this is a big company with about 150 employees using PC's (win xp and 7), considering replacing the current Windows server with a Mac server.
Is it possible to give users profiles once they log in like Windows server does? So when the user logs in they get to their own personal stuff? Can Mac server do that?
Can the user also get to the default printer and send prints to it regardless where they log in from inside the company?
And can the home directory to each user NOT be copied anywhere on the local machine where they log in? Meaning that after they log out there will be no traces to their files on that local PC..
Thanks a lot in advance!!

By some standards, 150 is not "big" but a large small business :-)
Regardless, please plan and test and plan some more, very carefully !
The picture for what you want to do once looked far better with 10.6 server but that had its limitations as well.
With 10.6 server, Apple was using Samba - they are no longer doing so,
but/and the version of Samba they were using only provided NT-Domain level support.
So that would not work with your Win 7 stations either. But could be made to work relatively well with XP workstations. You can no longer buy any new Mac that runs 10.6 server and 10.6 server would be hard to obtain.
Not a great route to go.
Bear in mind that the key problem with Apple's Samba was that Samba changed their licensing,
and there's not a thing in the world Apple could do to implement a current version of Samba without violating their own operating principles and the licensing requirements.
You'll be heading into heavily uncharted territory here. Odds are good that any desired domain-functionality is not going to work for you.
Honestly, Apple appears to have thrown in the towel on directory-level support for Windows,
and the best way to support Windows workstations in that regard is with Windows server and AD.
Basic filesharing works, with some caveats.
If there's no AD involved at all, then have a look at my earlier post,
https://discussions.apple.com/thread/3206725?start=47
Which worked a-ok for me but your mileage may vary.
Samba new current versions and GPL3 licensing issue:
https://discussions.apple.com/thread/3206725?start=75&tstart=0
"GPLv3 makes it impossible to provide signed binaries without also providing the signing keys. A few seconds of thought will reveal why Apple is unwilling to provide copies of the keys they use to sign system software. Part of locking down OS X security profile required removing anythign that used GPLv3.
Short version: GPLv3 is specifially desinged to be anti-company, and you are going to see a ever widening schism in the FSS/OSS community between GPL and all the other licenses, and you will be seeing less and less GPL code in commercial OSes and more BSD/Apache/&c code."
http://discussions.apple.com/thread.jspa?messageID=12494378

How to join to window server with NIP policy

how to join to window server with NIP policy?

Since you refer to MySQL as the default database, I presume that you're talking about using PHP.
Yes, you can link to MS SQL Server - as long as you're willing to code everything by hand. If you're looking for automated code generation, though, the answer is no.
Even the default PHP/MySQL server behaviors are not really worth considering for professional web development. They're fine for quick prototyping, but they use deprecated functions that are not suitable for a production environment.

Connect Azure Pack to Service Bus for Windows Server with Custom DNS

Hello! I'm trying to configure Azure Pack to use Service Bus for Windows Server 1.1 with Custom DNS.
All runs on one virtual machine (Windows Server 2012 R2) in Windows Azure.
I following this post:
roysvork.wordpress.com/2014/06/14/developing-against-service-bus-for-windows-1-1
Replace FramDNS "servicebus" to "mymachine.cloudapp.net", and create certificate:
SelfSSL /N:CN=mymachine.cloudapp.net /V:1000 /T
On Windows Azure Virtual Machine:
1.I'll set publuc DNS: mymachine.cloudapp.net
2.Open ports: 10354,10355,10356,10359,10000-10004
3.In hosts file: 127.0.0.1 mymachine.cloudapp.net
4.Create certificate:
SelfSSL /N:CN=mymachine.cloudapp.net /V:1000 /T
PowerShell:
Stop-SBFarm –Verbose
Set-SBFarm -FarmDns 'mymachine.cloudapp.net'
Update-SBHost –Verbose
Start-SBFarm –Verbose
New-SBAuthorizationRule -NamespaceName ServiceBusDefaultNamespace -Name MainRule -Rights Manage, Send, Listen
Afther that i can connect to my ServiceBusDefaultNamespace with SAS.
It's work perfect. But, When I try to create Service Bus Namespace from Azure Pack Tenant portal - in Log an Exception:
Namespace Provisioning Exception. TrackingId: . SystemId: . Namespace: SomeNamespace.
Method: Activating. Exception: System.Net.Http.HttpRequestException: An error occurred while
sending the request. ---> System.Net.WebException: The underlying connection was closed:
Could not establish trust relationship for the SSL/TLS secure channel. --->
System.Security.Authentication.AuthenticationException: The remote certificate is invalid according
to the validation procedure.
And status of namespace - Activating.
Please help!

Hi Alexander,
According to the log, it seems that the validation process of the certificate failed.
Please make sure that the certificate is installed in the client properly.
Usually, self-signed certificate should be installed in the Computer Account-->Trusted Root Certificate Authorities.
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Mac keeps trying to log into a Windows server with old password.

My iBook for some reason is trying to log into a server at work we use to share files on (let's called it Xserver). I recently discovered through logging my network traffic on my router at home, that my machine was still trying to access XServer.rr.com Xserver.socal.rr.com even when I was not in the office. It doesn't stop trying, over and over and over it goes, trying to find XServer. I was wondering why my account on XServer kept becoming Locked Out (Windows Server), and this is obviously the answer because it's not using the correct password.
How can i find out where OSX is instructed to connect to XServer automatically and keep trying, and tell it to stop?

Look in SystemPreferences>Accounts>yourAccount...and then into Login items. see if this server login is set to be automatic there.
If it's just a wrong password you need to fix, look into Utilities>KeychainAccess...see if this server is in there, remove it. Or do Keychain FirstAid.
There is an automount function somewhere, but I forget where that is.

P2V of a Dell Windows server with HW Raid

Hi,
I've got a few very large WIndows 2003 Dell Servers to Virtualize. The problem I've got is that each of the Dell Servers has a hardware raid configured (using the device driver mraid.sys). If I perform a standard P2V of the Dell Server the Windows image fails to boot because it cannot find the 'C:\' Drive. To overcome this I pefromed a Linux DD of the Dell Server to an 'intermediate' standalone server that doesn't use a raid controller (standard SATA HDD), peformed a Windows repair and then did a P2V from this 'intermediate' standalone server to create the VM Image.
I don't want to modify the original Dell Server (the one with the HW Raid controller), just incase the P2V doesn't work.
Q: Can anyone suggest a better way of pefroming a P2V on a Windows Server that has a HW Raid controller (the device driver is the problem here).
BTW the P2V 'sees' the HDA Partition of the Dell Server. Alternatively is there a way to 'remove' the device driver mraid.sys and repair the VM Image?
TIA

If you have a My Oracle account (support) take a look at KB article 1122170.1
This is an article that addresses the same problem after virtualizing a HP server (hard ware raid). It has something to do with the MBR placement.

Howto install SAP NW Windows Server with Linux Oracle 11g?

Hi !!!
In this moment i want to install a SAP Netweaver PI, but the client already has a linux database server with oracle.
I read the MasterGuide but i cannot find the section or similar situation.
Scenario
WK8-PI
192.168.1.100
Admin y passwd
Linux-Oracle
192.168.1.77
port: 3355
user y passwd
how to install SAP NW?
Levy

Hi!!!
i read the instruction with Distribution System, and continue the steps, but the time to choose SAP System Database i cannot write the linux server always show me the Windows Server, and i can write the unique field is the instance. After push the next button and send me error, not install oracle database.
thanks
Levy Gonzalez

Disconnect window server with database server

I'm currently run a pl/sql job in database, the database server currently r connected with window server, what i need to do is sometime the window server will down and the job will fail, n i need to recover the database manually. How do i eliminated from connected with window server?
Thanks

In such a scenario why do you want to run the pl/sql job?

Running Windows Server with Hyper-V on Toshiba Laptop

I will soon be in charge of a Windows server that my company is purchasing to run SQL Server off of. In order to further prepare myself, I want to get some extra practice outside of work with it. However, I'm thinking that my computer's requirements may
not be up to par - and I can't really afford to buy a new computer at the moment.
I have a Toshiba Satellite laptop running Windows 8.1 with an AMD A6-5200, 4 GB RAM and a 600 GB hard drive (HDD, not SSD). I have the book Training Guide: Administering Windows Server 2012 - and it suggests a computer with at least 8GB RAM. Also - the books
examples and exercises use Hyper-V for virtualization.
If my computer couldn't handle doing the exercises and examples - would Windows Server 2008 be a better idea? If so - could you point me in the right direction of guides/books/tutorials for Windows Server 2008 system administration?
Thanks,
-Chris

You can try running the VM with only 2GB of Memory. Also, make sure that no other program is running in the same time other than your hypervisor. You might see some slowness on the VM that way but it should be good to do some practices.
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

Connecting to a windows server with OS X Tiger

Does anyone have any experience of using Mac OS X Tiger in a windows networked environment? I am hoping to use my MacBook at my work office and wondered if a Windows server requires any special configuration to allow this?
I believe that the server at the office uses active directory and most connecting clients run Windows 2000.
More specifically, will I be able to access shared drives/folders with read/write permissions set by Windows?

http://macwindows.com/Win2003.html

ACS Windows Server with wrong user authenticatoin

Hello,
we have a new Windows ACS Server with external user database authentication. Users at the ACS Server were configured, disabled, enabled and deleted by RDBMS synchronization with account actions.
We have the problem that a user could be authenticated through the external LDAP even though if the user or his group is disabled inside the Windows ACS Server.
The same procedure doesn't work with our ACS appliance where user administration is done only through the webinterface .
Does anybody know a solution for this problem?
Best regards
Torsten Waibel

Could it be you have unknown user authentication enabled?
If you did, and a username came through authentication in a different format to one one added via dbsync... eg user@domain or domain\user the unknown user policy might legitimately think its a different user. In which case it would depend on what group mapping had been setup.
Just a thought.

Rman restore to windows server with different drive layout

I'm restoring to a server with a different drive layout. I'm using the set newname for the datafiles and it's working fine. However. My redo logs show that they are on the f: drive and the f: drive doesn't exist on the new server (recovery). so when I'm all done I get an error saying that it cant find the redo02.log. Any ideas?
TIA
Dave

no problem, thanks for the reply.
Here's what I tried in the init.ora
LOG_FILE_NAME_CONVERT=('F:\ORADATA\ORCQA08','D:\ORADATA\ORCQA08')
I didn't even create the spfile I figured I could do that later.
The datafiles alll go to the correct drive, here's my restore statement:
run
allocate channel disk_channel1 type disk;
allocate channel disk_channel2 type disk;
SET NEWNAME for datafile 1 to 'd:\ORADATA\ORCQA08\SYSTEM01.DBF';
SET NEWNAME for datafile 2 to 'd:\ORADATA\ORCQA08\SYSAUX01.DBF';
SET NEWNAME for datafile 3 to 'e:\ORADATA\ORCQA08\UNDOTBS01.DBF';
SET NEWNAME for datafile 4 to 'd:\ORADATA\ORCQA08\USERS01.DBF';
SET NEWNAME for datafile 5 to 'e:\ORADATA\ORCQA08\PLATDATA.DBF';
SET NEWNAME for datafile 6 to 'd:\ORADATA\ORCQA08\PLATHISTDATA.DBF';
SET NEWNAME for datafile 7 to 'd:\ORADATA\ORCQA08\TS_MV.DBF';
SET NEWNAME for datafile 8 to 'e:\ORADATA\ORCQA08\PLATNDX.DBF';
SET NEWNAME for datafile 9 to 'd:\ORADATA\ORCQA08\POADATA.DBF';
SET NEWNAME for datafile 10 to 'd:\ORADATA\ORCQA08\POABDATA.DBF';
SET NEWNAME for datafile 11 to 'd:\ORADATA\ORCQA08\POANDX.DBF';
SET NEWNAME for datafile 12 to 'd:\ORADATA\ORCQA08\TS_REPORT_DATA.DBF';
restore database;
release channel disk_channel1;
release channel disk_channel2;
i then do a switch database to copy and this registers the datafiles under the correct drive BUT when I try to open the database this is what i get:
ORA-00280: change 15613734 for thread 1 is in sequence #861
ORA-00278: log file
'D:\oracle\flash_recovery_area\ORCQA08\ARCHIVELOG\2012_08_03\ARC0000000860_07815
80447.0001' no longer needed for this recovery
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
cancel
Media recovery cancelled.
SQL> alter database open resetlogs;
alter database open resetlogs
ERROR at line 1:
ORA-00344: unable to re-create online log 'F:\ORADATA\ORCQA08\REDO01.LOG'
ORA-27040: file create error, unable to create file
OSD-04002: unable to open file
O/S-Error: (OS 3) The system cannot find the path specified.
You can see that it's still looking on the f: drive for the redo log. Is my syntax correct?? - - LOG_FILE_NAME_CONVERT=('F:\ORADATA\ORCQA08','D:\ORADATA\ORCQA08')
I can get rid of the other redo logs by dropping them and recreating under the proper drive but 01 is the active log.
any other ideas?
Dave

Windows server with one NIC and two IP address answers to ping with wrong address.

Hi,
I have Windows 2012R2 server, as a web server. It has only one NIC, and I have given it two IP addresses. 10.0.0.11 at the main Window, and under the advanced tab, I have added 10.0.0.12 as additional ip to the nic. I have even but to
host file a row, that states 10.0.0.11 server.domain.local.
Now when I ping "server.domain.local" from the server itself, it gives me 10.0.0.12 as answer.
With nslookup I can get correct address (10.0.0.11). But when I type server.domain.local to the web browser it tries to connect 10.0.0.12, which is incorrect. It should connect to 10.0.0.11 address. Could you please help me?
Regards,
Jouko

Windows does not work well with two IP addresses on the same subnet. Results are inconsistent, as you have discovered. In general, you should never try to put two IP addresses from the same subnet onto a single Windows box. That means either
multiple addresses on a single NIC or on multiple NICs.
Maybe if you tell us what you are trying to accomplish by having two addresses, we could provide better assistance.
. : | : . : | : . tim

Restore Oracle with brtools to a Windows server with different disk structure

Hello gurus,
Is it possible to restore Oracle to a Windows machine that has different disk structure than a source machine?
E.g. source machine had disks C:, D:, E: (on which Oracle data files were distributed), but a target machine has only disk C:
Database is backuped with brtools.

Hi
I did some mass changes using a script... to be honest I'm not sure if I did it to restore FROM a different location, or TO a different location.
You could also use Brrestore option -m|-mode to restore the datafiles to a new location.
Check online help -m|-mode - SAP Database Guide: Oracle (BC-DB-ORA-DBA) - SAP Library
For instance the here under command will restore datafiles #10 to #20 to the /tmp directory
brrestore -u / -b beokfyeu.pnd -c -m 10-20=/tmp
You could find datafile ID by querying view dba_data_files
select FILE_ID, FILE_NAME, TABLESPACE_NAME from DBA_DATA_FILES;
Regards

Windows server with dual wan router

Hello, I have a doubtful scenario to be addressed. We had our 2008 server running on a single internet connection, but since its not reliable and has down time we planned to get another one. We also bought a
DUAL WAN Router so that we get some of the IPs without the group policy applied for testing purposes. So if we run a DHCP
server on the router instead of the Windows 2008 server, will it work? We need one internet connection as the main connection and the other as standby for continous internet access.

Guys,
This is getting difficult to follow the conversation. Let me try to clarify,..this is way way simpler than what it is being made (as far as I can interpret the situation).
1. The dual WAN is completely irrelevant to the situation. It could easily be a single WAN (single ISP) and it wouldn't make any difference.
2. The WAN Device is the "Firewall",...meaning it is the NAT device,..and the only NAT Device
3. There is no VPN,...but if there were the VPN would have to be performed by the WAN Device, meaning that you would have had to purchased one capable of such.
4. The private LAN, as far as I can tell from what I read, is a single subnet "flat" network. Hence there is no router, none, zero,...and there should not be.
5. The result of #3 and #4 mean that RRAS should not be enabled on any server on the LAN anywhere.
6. DHCP needs to be, or at least it is best to be, "Active Directory Aware". Therefore it should be run on the Domain Controller. The WAN Device should have Client serving DHCP completely disable.
7. Group Policy is applied to an OU. If a machine account is in such OU then the policy will be applied, if the machine account is not in the OU then it will not be applied. GPOs should be applied to specific OUs,...not at the "root" of the tree.
The only policies that should be applied at the "root" are the Default Domain Policy and the Default Domain Controller Policy,..and those should never be touched and left at their "default" so that you have a place to return to if GPO things go badly.
Do not leave objects within the Default Containers (Computers, USers, etc). Always create one or more OUs (you can even nest them), move the objects into them, and Link (apply) the GPOs at that level.
Hope this helps clarify things.
Phil

Record File in Window Server with RFC to File Interface

Similar Messages

Maybe you are looking for