Record in Bex shows variations in decimals

Hi All,
I am facing a problem in the decimal places which impacts huge difference in the report.
Actually i had wirtten the currency conversion coding in the update rules of the cube.The data is converted and gives exact value with respect to decimal places in the infocube.
But when generating the report it shows the difference in the decimal places which leads to huge variations of the NETVALUE.
In the query design:
In the scaling factor nothing is defined.
In the number of decimal places i had given 0.00.
Can anyone help me out to solve this problem.
Pls treat the issue is urgent.
Ganesh

Olivier,
I am calculating  Total revenue of the netvalue of current year and the total revenue of the netvalue of previous year.Based on that i go for calculating ... which follows
PY Netvalue PY Order qty PY Ave.Price
CY Netvalue CY Order qty CY Ave.Price
Change in Revenue
Change due to price
Change due to Volume
The properties of keyfigures are
Number format
Scaling factor                    : Nothing Defined
Number of decimal places  :  0.00
Calculations
Calculated Result as         : Nothing Defined
Calculated single values as: Nothing Defined
Currency Translation
Currency Conversion Key   : Nothing Defined
Target Currency                :  Nothing Defined.
Ganesh

Similar Messages

  • How to watch a live broadcast show while recording two other shows

    If you have a TV with a QAM tuner built in and you use a splitter to connect the cable to the cable/antenna input of your TV while leaving a connection to the DVR, you will be able to watch a broadcast show live while recording two other shows on your DVR.  I tried this and it worked, but the channels I had access to (that seemed to be ones I was interested in) were basically the broadcast channels (in my area 3.1, 6.1, 10.1, 12.1, etc.).  Obviously you don't have access to the other features such as on demand, but it's handy to be able to handle three shows at the same time as long as one is on one of the channels available with the direct connection to your TV.
    Of course, this also provides a way to avoid the cost of additional set top boxes as long as you don't need access to the additional channels features like on demand.
    Bob S.

    OR if you're tv's older and doesn't have the qam tuner, you can hook up a HD antenna for 30 dollars, and if you live in an area that gets reasonable reception, you'll get something similiar to what you describe.
    both are good solutions.

  • I Recorded 4 audio tracks, could hear it in the headphones while recording. Meters show input. No playback sound. Advise.

    I Recorded 4 audio tracks, could hear it in the headphones while recording. Meters show input. No playback sound. Please Advise.

    How can anyone advise on such a cryptic post, all we can do is guess.
    Which version of Logic, what audio hardware are you using?
    Have you read the manual?

  • Recording Cable TV Shows using Mac Mini

    Hi:
    does anyone know how to record cable tv shows using Mac Mini?
    please discuss the hardware and software issues.
    Munir

    munirul wrote:
    Hi:
    does anyone know how to record cable tv shows using Mac Mini?
    please discuss the hardware and software issues.
    Munir
    There are several possible ways, some depend on the type of Cable TV system you have. First I am going to assume you are an American. While Cable TV is available in other countries, for example here in the UK, it ***** so bad in the UK that you are unlikely to be using it here.
    Now, with American Cable the first possible method has already been mentioned by others which is to use an analogue connection from your cable box to an Elgato EyeTV 250 (possibly discontinued). This is an analogue tuner for a Mac and will let your Mac record the signal. There is also the more expensive EyeTV 250Plus which includes a chip to do the conversion to MPEG2 and take the load off your Mac. This method will work whether your Cable box is analogue or digital.
    If your Cable box uses "Clear QAM" then you could get the HDHomeRun box from Elgato. This not only will provide a direct digital signal with no loss of quality, but will also provide two tuners, and can be shared across your home network. There is also the EyeTV 500 see http://www.elgato.com/index.php?file=products_eyetv500 but this also may have been discontinued.
    Finally, if your Cable box has a FireWire connection (and by law they have to give you the option of this) then you can connect the box via FireWire to your Mac and run software on your Mac. Again this will be a direct digital capture with no loss of quality. See the following two pages for information on how to do this.
    http://www.ammesset.com/irecord/
    http://project-tigershark.com/people/rob/blog/2007/01/14/cable-tv-mac-firewire-h d-pvr/
    Note: I am in the UK and have no direct experience of any of the above, and can only gnash my teeth in frustration at how spoilt for choice US TV/Mac users are compared to the pathetic massively DRMed situation here in the UK.

  • How i use java applet data grid i have many record i need show in grid

    hi master
    sir i have many record i want show all record in applet grid how i use grid in applet
    please send me sample code of java class how send many record to grid and applet code how use applet grid
    thanks
    aamir

    Duplicate post:
    how use the jtable in java applete
    Aamir,
    If you use JApplet then you can use JTable. Just do an Internet search for "JTable" and "applet".
    Good Luck,
    Avi.

  • Update Record Does Not Show in Server Behaviors Pane

    I am using Dreamweaver CS4 on a Windows 7 machine. I am coding in ASP VBScript. When I apply an Update Record behavior to a form and upload the file to the server, it works fine. However, the Update Record does not show in the Server Behaviors pane. Therefore, I cannot click on it to make further edits to it. When I open this same file in Dreamweaver CS3 on a Windows XP machine, I do see the Update Record behavior in the Server Behaviors pane and I can click on it to make it edits. What do I need to do to get the Update Record behavior to show?

    Probably not the answer you are looking for, but support for traditional ASP has not been a focus of DW development, nor has it been for Windows 7 for
    that matter. ASP is a "depreciated" language and support for it is dwindling. The I don't know exact reason for what is happening to you here, but I'd imagine it's an issue with CS4s translators and the combination of the feature sets in both Win 7 and CS4 not "worrying" about ASP as much as they used to.
    Lawrence Cramer  *Adobe Community Professional*
    www.Cartweaver.com
    Complete Shopping   Cart Application for
    Dreamweaver, available in PHP and CF
    Stay updated - http://blog.cartweaver.com

  • Is it possible to record a TV show onto a DVD Rewriteable, or DVD R?

    You can connect almost any type of recording device to a Comcast box and play back or watch live in real time using the analog video outputs on the back of the Comcast box.  
    As an example if the subscriber owned a stand alone DVD recorder, connect to the DVR or cable box with composite yellow video and red / white for audio to the video input on the recorder, and match the colors to the rear panel on the DVR.  Setup the recorder to record from the video input and place the DVR in play.  You can choose any type of blank DVD disk that would work in that recorder.
    Same if you wanted to record to a computer, you would need a capture card and proper recording software on the computer to record from that composite video cable.

    Is it possible to record a TV show onto a DVD Rewriteable?  I would think that DVDs are now like VHS tapes.  Can we use our own DVD Recorders, or must we have the show recorded by Xfinity/Comcast? Is there a certain type of DVDs we need to use maybe, like R+ or R- , or a certain brand of DVDs that are made? 

  • Cloud dvr doesn't record the whole show

    New to cloud dvr.It records, downloads the show.One hour show records for one hour. But when i play the show first 54 minutes are fine, then it skips5 minutes and then it plays last minute. The last 5 minutes are empty. Very irritating with shows like sherlock Holmes. Help

    I think I understand his problem because I believe I am having a similar problem. I have 3 x1 dvr boxes with cloud services. Ever since getting the "whole home update" introduced in version 1.47.04.c I've been getting recordings that end prior to their actual scheduled end time. This only seems to happen with longer recordings, such as football games, etc. USUALLY but not always when I extend a live show recording. One hour recordings seem to work fine. Example... I set Sunday night game to start at 8:15pm and end at 11:30pm as per the guide. I then extended the recording for one hour which makes the end time 12:30am. What I wound up with is a recording that ended at 9:45pm. The dvr knows it should have been a four hour forty five minute recording because the progress bar says it. Problem is most of the progress bar is gray and only a small portion is blue, indicating the recorded content. The recording ends and asks if I want to delete it when it gets to the end of the blue portion of the progress bar. This is not an example of a continuation due to a power outage. I actually physically watched the dvr which appeared to record until 12:45am. Once the recording ended, then the back end of the recording dropped off. This situation occurs on many of my football or movie recordings, that are over an hour or so. This happens frequently although it appears to be random as to when it happens and how much of the recording it cuts short. Since I can't tell where the recording is located, I can't determine if the problem is with one box or multiple boxes. Boxes have been exchanged anyway so it appears to be a software bug as opposed to a hardware issue, unless the problem is at the account level. I've been calling Comcast about this since mid October. I have had multiple tech visits as well as many missed tech appointments. I've spent a ton of time on the phone with customer service. Nobody seems to be able to resolve the issue. Techs tell me signal level is good. We already have a booster, no moca filters. Btw, I'm a programmer and I write code for Cisco so I know a little about how a dvr works on a technical level. I'm pretty much at the end of my patience with Comcast as I've been dealing with and paying for 3 dvrs that do not record reliably. As a programmer I understand there is no such thing as bug free software but this is just crazy. Any ideas? 

  • Recording my radio show

    I am a deejay and i would like to record my radio shows and post them to my website so that people can listen when ever they like. What is the easiest way to do that using my Mac book Pro?

    How to Record Live Radio Stream on Windows and Mac  I think this post will help you out. It provides various solutions to record radio free. 

  • Recording a Radio Show

    Hey hey. I need some help to record a radio show i do onto Garageband. The radio board has outputs. Can someone help. Thanks.

    it would be the same steps as recording from a cassette deck:
    http://www.bulletsandbones.com/GB/GBFAQ.html#recordcassette

  • DVR stops recording before the show ends

    Frequently,   when we watch one of the shows we recorded, the recording appears to have stopped early.
    We go to the program guide and click record for the show we want to record.  Sometimes, the recording stops before the previews end.

    That's the station's fault. Frequently they go a minute or two later than what's scheduled. If you know of any programs that normally go beyond what they are supposed to, then add a few minutes onto the end of the scheduled recording.

  • How to show image related to record in Bex

    I'm working to display the image directly in the workbook at item level per each material/record in the query result.
    How to I have to define an VBA macro to display the image?
    The image will be in an application server and the path will be simply defined with concatenate <common root>+<attribute of IO in result of query>
    Thanks
    Message was edited by: Sergio Locatelli
    null

    You may be able to use the document integration function (for master data).  Each master data value for a particular info object can have a graphic file associated with it.
    Please see the online docs (http://help.sap.com/bi), and search on document integration.  There should also be a "How To" document within the SDN related to mass upload of documents.
    Hope this helps.

  • Bex: Show Data present in multiple rows in single row

    Hi ,
    I have a dso with field and data like
    Material itemtype Launch Date Text
    1. 100001 10 10/11/2010 delivered to x
    2. 100001 20 10/11/2010 not delivered
    3. 100001 30 05/12/2010 delivered to y
    i have to show this data in report as single record with format condition like
    Material itemtypetext 10 itemtypetext 20 itemtypetext 30
    100001 delivered to x not delivered delivered to y
    here the itemtypetext 10 value is calculated as = if itemtype=10 and Launch date < today
    the itemtypetext 20 value is calculated as = if itemtype=20 and Launch date < today
    the itemtypetext 30 value is calculated as = if itemtype=30 and Launch date < today
    Thanks
    Prashant
    Material   itemtypetext10     itemtypetext20        itemtypetext 30
    100001     delivered to x    not delivered           delivered to y
    Can you please tell me how can i achieve this. and is it better to do in Datamodel or in Bex reporting?

    Hi,
    i dont understand what your meaning about value of itemtype text? Could you please explain it again clearly or give uns a complete example?
    This condition is a bit complex for query formular to realize it, Instead of it you could  create a new virtuell Characteristic with a flag to do it. e.g If lauch < today, this flag will be '1', else will be '0'. Then we could restrict KF in the query to calculate.

  • "Result" row not appearing for the Structure record in Bex Designer.

    Hi
    In BI BEx Designer,
    under Rows-> click any Characteristic-> Display Tab-> Result Rows: "Always Display" Option controls Last Row named "Result" (yellow colored) after the actual data reports ends.
    But i am not finding this thing for the structure.
    Actually my this report is based on 'Structure-> 2 selections' under Rows; once i run this query i get data without yellow colored 'Result" row at the end of report. I wanted to maintain the symmetry with other reports.
    Could u pls let me know how to get Query last "Result" record if i use only structure under the rows.
    Thanks...

    I limit the selection to display in one page, i see the overrall result but i've a result to show up after a Characteristic (result row option 'Display with more than one single value'), it works fine in BEx but not in web.
    for the other query, yes i do KF in the report.
    thanks

  • Latest record need to show in report

    Hi all,
    I have a requirment on shippment is as below.
    I want track a perticulat shippment based on shippment number.
    I am loading the shippment details to My ODS and the key's are 'Shippment number' and 'Date' and 'time'.
    Now my user don't want to see all the records that are relevent to perticulat shippment in bex report, he wants to see only latest record based on date and time by entering the shippment number only as input in the report.
    Can any one advice me on this, Points will be assigned.
    Regards,
    Raja reddy.

    Reddy,
    Did you try using a replacement Path variable on Date?
    If your req is to show all the shipment no.s for a date which is latest, you can do this by condition as TOPN.
    (If date is in KF list)
    But if Date is a charecteristic in the Provider, Use repl path and then put TOP N condition on it.
    Try it! You must get that.
    Cheers,
    Sri

Maybe you are looking for