Record Mode Failure

It's the craziest thing - I'll set up to record, click the
record button, the program does its countdown thing
(...4...3...2...1) and then, instead of capturing anything, it
drops back to the original Captivate startup interface. Has anyone
else had this experience?

HI Gman3000 and welcome to our community
Yes, I've seen it. Happens occasionally with PCs and Students
in my classes. Seems the "fix", if you will, is to simply restart
Captivate. Sometimes even restart Windows.
By the way, I couldn't help but notice you are referring to
the countdown. This indicates you are recording audio at the same
time as you are recording the movie. Feel free to do what you want,
but I would feel remiss if I didn't point out that this won't
garner you the best results. Best results will occur by recording
your audio as a separate process after you have recorded your
movie. Actually, this is the way the motion picture industry does
things. They always treat the audio as a separate process. I'm just
guessing here that maybe they learned a thing or two about it and
that's why they do it this way. ;)
Cheers... Rick :)

Similar Messages

Custom recording mode in captivate

Captivate has demo, training simulation and assessment
simulation recording modes. It also has a custom mode. What is it
for and How to use it? Does anyone know?

Hi there prabu77
Each of the three modes configures presets.
For example:
* Demonstration mode configures the recording process to add
Text Captions, Highlight Boxes and track Mouse Movement.
* Assessment Simulation configures the recording process to
add Click Boxes with Failure Captions and Text Entry Boxes with
Failure Captions
* Training Simulation configures the recording process to add
Click Boxes with Failure and Hint Captions and Text Entry Boxes
with Failure and Hint Captions
* Custom mode allows you to choose the options that will be
in effect. Maybe you want some combination of elements that the
other modes don't offer.
Hopefully that explained it for you... Rick

I have quicktime pro and it does NOT have the screen record mode that Quicktime is suppose to have. Can I uninstall it and go back to an older version that would have screen recording? If so, how? Step by step needed. Thank you for your time.

I have quicktime pro and it does NOT have the screen record mode that Quicktime is suppose to have. Can I uninstall it and go back to an older version that would have screen recording? If so, how? Step by step needed. Thank you for your time.

Did you remove Quicktime X?
On a normal install Quicktime 7 is installed in the Utilities folder and Quicktime Pro in the main Applications folder.
You will need to reinstall OS X to get Quicktime X back if you have deleted it.
I notice yor profile says 10.5.8. Quicktime X is only available on 10.6 and above.

Searching attibutes in the record mode in Data Manager

Hi,
If i create a new attribute in taxonomy mode,i cannot view it in the corresponding search in the record mode in Data Manager.The particular attribute which i have added is not getting displayed in the attributes in the search pane.If i have to search for that attribute in the record mode what should i do.
Thanks and Regards,
Preethi

hi Preethi,
there are a few differencies between fields and attributres
have a look at table:
Tab. 1 Comparison Fields vs. Attributes
from this document
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5d4211fa-0301-0010-9fb1-ef1fd91719b6
for search options based on attributes have a look at the bottom
of the table I mention
hope this will clarify a little bit
Regards,
michal

Record mode - some doubts

Good morning … bom dia …
I have some doubts about RECORDMODE … follow ...
Is it necessary development some ABAP code in transformation ? … or in Initial / Final routine ?
In DTP from DSO to Cube, is mandatory choice the option “change log” ? Or make some filter to select only valid records ?
Is There some configuration on query ?
Or the goal is only know how recordmode works, based on the table ROOSOURCE ?
Thanks in advantage …. Obrigado …
Kokeny, Marcio
P.S.: I already read this some documents:
http://scn.sap.com/people/swapna.gollakota/blog/2007/12/27/how-does-a-datasource-communicates-delta-with-bw
(How does a datasource communicates "DELTA" with BW?)
http://scn.sap.com/docs/DOC-54330
(Recordmode Importance in SAP BI along with Delta Handling)
http://scn.sap.com/docs/DOC-29927
(Record mode Concept in SAP BI)
- Record Mode Concept in Delta Management
- 0RECORDMODE and Delta type Concepts in Delta Management

Hi,
Is it necessary development some ABAP code in transformation ? … or in Initial / Final routine ?
Why you got above doubt?
Routines are used as per needs. Not based on 0recordmode.
In DTP from DSO to Cube, is mandatory choice the option “change log” ? Or make some filter to select only valid records ?
Not mandatory. if we run first time dtp with delta mode option then no need to select change log option.
if we perform dtp as init and later delta then we need to choose changlog option for delta.
Is There some configuration on query ?
No. 0RECORDMODE is upto DSO level only to track changes.
Or the goal is only know how recordmode works, based on the table ROOSOURCE ?
0record mode works based on data source delta type.
Data source delta type you cam see from table ROOSOURCE and field deltyp - ABB.ABD.AIE...etc.
Thanks

Animations not working in record mode

I uploaded a powerpoint file to Keynote, and started off working fine in record mode. But then I noticed some of the formatting needed to be changed and now the animation text doesn't show up in the recorded window. I can see it in the preview window of the next slide, but not in the main window. When I go to play a full screen slide show, it works fine. Help is appreciated

Try restarting your iPhone by holding down the on/off and the home buttons at the same time until you see the Apple logo. Then give it a try.

Does Premiere Pro support a "self-record" mode?

Does Premiere Pro support a "self-record" mode? It would record a new video with the source being what you are previewing, in terms of "animation" rather than in terms of the quality seen on screen. I often like to make humorous effects by dragging the time indicator back and forth, and have to resort to recording my own screen while in semi-fullscreen mode, then import that video and crop out the chrome. This obviously is not optimal and results in significant quality loss. Does Pr itself have such a feature built in?
I doubt it does, but it would be extremely useful.

Ditto what mark said. The intended purpose of the project manager is basically to do just as you said. It was a great solution for anyone that wanted to store the few usable minutes of their media and were confident in just discarding the rest. The problem is that, as Mark said, it doesn't handle the trimming of all common file types these days. That's because, in video, 'destructive' editing is always a matter of re-exporting edited versions and project manage simply cannot export every format to any format. The original files are never actually being trimmed down, you're just getting new versions to replace the old ones with. This represents another drawback in the form of generational loss. That's why the Project Trimmer many not be the ideal solution for you even if it is able to trim all applicable formats for you.
I tend to agree with Jim and thing that the better way to go is with Prelude. With that app, you can log what you want before hand and then capture (or, more accurately, 'Ingest') just those parts from the start. Still, it might be a good idea to save the original footage on memory card(s), hard drive(s)s (or , dare I say, tape(s_?). That way if you find out later that you didn't capture (or ingest) all of what you wanted, you can always go back and get it. Also you'll have an additional backup which could easily be re-captured from the original source if you've save the prelude project(s).

Soundtrack Pro pops out of record mode after 1 second - Help!

I have an ADR session tomorrow, so this one is pretty urgent. I have Soundtrack Pro 2.02 on my PPC G5 and I've used it to record vocal tracks for a long time, but I haven't used it a couple months. I started it tonight to do a couple test takes and hit the record button and it records for about 1 second then pops out of record mode. The playhead, however, continues to run. So it's not that it stops altogether, it just quits recording.
Nothing new in terms of hardware, same preamps, same mic. No new software that I can think of, just the standard updates. Searched the and found the same question asked a earlier this year but was never answered ( http://discussions.apple.com/thread.jspa?threadID=1382762&tstart=6 ). I hope someone knows what's going on. Thanks much.

UPDATE:
I did a complete re-install of FCS and it's working now.

Selecting multiple recording modes in Captivate 3

I'm using Captivate 3. I understand the concept of choosing your mode eg. demo mode but when you first start a project, you are allowed to select multiple modes.
From what I can see however, you can only produce and add content to these multiple outputs simultaneously, at project creation. Multiple .cp files have been created but you can only edit one at a time. Any additional recordings/edits I add to one will not be picked up by the others.
Is that your understanding? Or am I missing something? My intention was to produce both a demo version and a training simulation simultaneously, with editing of captions and additional recording to be carried out afterwards. It's not viable for me to do all my recording in one seamless session.

Sorry to disagree a little bit. In some cases having the possibility to create 3 recording modes at once is useful and I do not understand why you say this has been abandoned in later versions? They are still there in Captivate 5, and I think that is the latest version. Could you explain
Useful in this situation: you want to have combination of Show me/Try me/Test in one file. Capture in the 3 modes at once and you can use copy/paste (or import in previous versions) slides to achieve your goal. You will be sure that the setup (resolution etc) and the capture will be identical, whereas if you capture at different times in the different modes this is not always the case. It is much easier to delete some slides than to create slides that fit perfectly in the middle of other previous captured slides.In the case you described, I would capture in 2 modes (Demonstration and Training), then copy the 25% slides I need from the Training mode to the Demonstration file.
Hope you understand this viewpoint?
Lilybiri

Recording Modes greyed out

All my recording modes have greyed out, as the attached screen shot, so I cannt change options.
I seem to be stuck in Demo mode.
Any ideas what I have done wrong?
Noel
England

Hi Noel
Please note that if you have an image, you may insert it inline using the little camera icon just above where you type the post.
This way we may see your image immediately and not have to wait for the forum mods to make it available in the attachments section.
So it will be helpful if you could reply and add the image that way. Perhaps then we might better help you.
Also, what version of Captivate are you using?
Cheers... Rick
Click here for Adobe Authorized Captivate and RoboHelp HTML Training
Click here for the SorcerStone Blog
Click here for RoboHelp and Captivate eBooks

Zen V Plus stuck in microphone/recording mode HE

HiMy brand new Zen V Plus is stuck in microphone/recording mode. I've tried holding the back button (which is what you're stupposed to do for more options) but then it just starts recording. AFter I end the recording, I'm back in microphone mode again and can't get out. I've already tried turning on/off and resetting - nothing hel
ps.
Please help if you can!ThanksDucky

I'm also having this problem and would have tremendous appreciation for anyone who could offer a solution. My Zen V Plus worked well for about three months before this problem arose, and I really enjoyed having it, so it's very dissapointing to me that it's not working anymore.
The behavior: as soon as the player is turned on, it goes into locked mode, regardless of the position of the lock toggle switch. If I toggle the lock switch, it either wakes up and then immediately goes back into locked mode or simply doesn't respond. If I'm lucky, I can get it to actually unlock by toggling the switch many times in a row, but then it will return to locked mode after a few seconds.
A few more details: I have tried doing a hard reset. I am not having any trouble syncing the player to my computer. Also, this problem creeped up slowly: it started just happening once in a while, but now it happens every time I use the player.
Thank you in advance to anyone who can help.

Record Mode in SRM Std Extractor.

Hi All,
In the SRM std extractor for POs we are having an issue. The POs which are deleted in SRM are supposed to be deleted in BW DSO as well. But this doesn't always happens for POs with limit Line items. Rest all the records are deleted and one Limit Item remains as the record mode for the rest of the records come as 'D' and for Limit Item is blank. It is an AIMD extractor. If anyone has faced the issue please let us know how this was solved.
Alternatively Is there any way to find how record mode is populated in a standard extractor. Please let us know.
Thanks In Advance,
Aparna

Hi Aparna:
Could you please provide more details? For example:
- Which is the DataSource you're working with?
- Are you loading data to a Standard DSO? Which one?
- What are the InfoObjects included in the "Key fields" of your DSO?
Regards,
Francisco Milán.

Record mode " R"

Hi ,
Here i have a Write Optimized DSO as EDW layer from which the data is loaded to other DSO 's
Now, i have a record with record mode value ' R' ( reverse posting ) in EDW, I understand that the particular key combination record will be deleted from Active table of ODS if the Recordmode value is R .
However i believe i should be able to see the same record with Recordmode value "R' in change log table.But i am unable to see the particular key combination record itself in cahnge log table.
Can you please explian why is it so ?
Thanks,
Siva.

Hi,
Delta Administration:
Data that is loaded into Write-Optimized Data Store objects is available immediately for further processing. The activation step that has been necessary up to now is no longer required. Note here that the loaded data is not aggregated. If two data records with the same logical key are extracted from the source, both records are saved in the Data Store object, since the technical key for the both records not unique. The record mode (InfoObject 0RECORDMODE (space,X,A,D,R)) responsible for aggregation remains, however, the aggregation of data can take place at a later time in standard Data Store objects (or) InfoCube. Write-Optimized DataStore does not support the image based delta(RECORDMODE), it supports request level delta, and you will get brand new delta request for each data load. When you load a DataStore object that is optimized for writing, the delta administration is supplied with the change log request and not the load request.
Since write-optimized DataStore objects do not have a change log, the system does not create delta (in the sense of a before image and an after image). When you update data into the connected InfoProviders, the system only updates the requests that have not yet been posted.
Write-Optimized Data Store supports request level delta. In order to capture before and after image delta, you must have to post latest request into further targets like Standard DataStore or Infocubes.
Thanks

Record mode 1 unknown

Hi Experts,
I am loding to the data to ODS,When i am loding data to ODS It's Showing below given error
Record mode 1 unknown data record , activation failed,Please give him to suggestion so that i am go throw that your suggetion please help me.
Regards,
Suresh.

Hi,
RECORDMODE object can only have values N,R,X,D, and blank ...
It cannot have 1 as the value in the recordmode field.
check your mappings for the RECORMODE object in the DSO and see which field you have mapped in the transformation for this DSO.
if not appearing in the main transformation then look for it in the other rule groups.
Its should be mapped to either ROCANCEL or any indicator like deletion indicator..which brings only X and blank.
If nothing like that is coming from the datasource then you can leave it blank and should not map to anything.
Right now I think you have done wrong mappings and have recordmode to something which is bringing values 1.
correct the mappings and reload the data.
Thanks
Ajeet

Record mode

hi friends can any one pls send me notes on bw record mode and with clear steps ...how does it works ...and things like that ....sorry my mail id is [email protected]
thanking you all in advance,
kavita

'X': The record delivers a before image
The status is transferred before data is changed or deleted.
All record attributes that can be aggregated have to be transferred with a reverse +/- sign. The reversal of the sign is carried out either by the extractor (default) or the Service API. In this case, the indicator 'Field is inverted in the cancelation field' must be set for the relevant extraction structure field in the DataSource.
These records are ignored if the update is a non-additive update of an ODS object.
The before image is complementary to the after image.
'A': The record delivers an additive image.
For attributes that can be aggregated, only the change is transferred. For attributes that cannot be aggregated, the status after a record has been changed or created is transferred. This record can replace an after image and a before image if there are no non-aggregation attributes or if these cannot be changed. You can update the record into an InfoCube without restriction, but this requires an additive update into an ODS Object.
'D': The record has to be deleted.
Only the key is transferred. This record (and its DataSource) can only be updated into an ODS Object.
'R': The record delivers a reverse image.
The content of this record is the same as the content of a before image. The only difference is with an ODS object update: Existing records with the same key are deleted.
'N': The record delivers a new image.
The content of this record is the same as for an after image without a before image. When a record is created, a new image is transferred instead of an after image.
The new image is complementary to the reverse image.
The table RODELTAM determines which characteristic values a delta process uses (columns UPDM_NIM, UPDM_BIM UPDM_AIM, PDM_ADD UPDM_DEL and UPDM_RIM). The table ensures that only useful combinations of the above values are used within a delta process.
When extracting in the 'delta' update mode in the extracted records for the indicator, a DataSource that uses a delta process can deliver only those characteristic values that are specified in the delta process.

Record Mode Failure

Similar Messages

Maybe you are looking for