Record more than 2 audio channels whil capturing?

Is there a way to capture video and 4 audio sources via firewire all at once? I am using a Motu Traveler and Final Cut 4 for this project. I've seen somewhere that there are 4 channels of audio when capturing DV and it seems that I am able to capture audio inputs 1&2 or 3&4 but not both.
If I can't do it with the items I have suggested , is there another way?

You need to ask this question on the FInal Cut Pro forum.

Similar Messages

  • I can't seem to get GB to recognize my Behringer X1222 USB Mixer. It will record, but shouldn't I be able to see and/or select which input channel(s) that I will record from? Can I record more than one channel at a time, and record multi tracks?

    I can't seem to get GarageBand to recognize my Behringer X1222 USB Mixer. It will record, but only on the generic "USB Input, without seeing or letting me select the input channel from the mixer. Can't find any drivers from Behringer. How do I getGB to "see" the mixer? Thanks, I'm a newbie to Macs in genreal, and recording...

    viiram wrote:
    It will record, but only on the generic "USB Input, without seeing or letting me select the input channel from the mixer.
    the x1222 includes a 2 channel audio interface, 2 channels are all you can get from it.
    the most you can do is record to 2 tracks at a time; skim this tute to see how:
    http://www.bulletsandbones.com/GB/Tutorials.html#allaboutrecording2tracks
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • Can Logic Pro record more than 16 channels of midi?

    I want to use multiple keyboards on 8 different ports. Am I limited to 16 channels? Can I play and record keyboard 1 channels 1-5 on Port 1, and keyboard 2 channels 1-8 on Port 2? Can I record 16 channels on each of 8 ports? I have already enabled auto demix by channel, but can only use 16 channels regardless of port.

    Tools&Keys wrote:
    Yep, unfortunately, I'm sure you can't. I kept hoping there was some obscure way to work the Environment to be able to get around this, but all the searches turn up the same limitation. Kind of surprising, and must be something very difficult to rectify, as it's been a long-time complaint. Maybe next upgrade!!
    Hopefully! The basic problem is that the sequencer doesn't allow selection of MIDI input ports per track like other DAWs. This design flaw is in fact very difficult to rectify because Logic's environment doesn't transmit port information to the sequencer. So it would require a complete rewrite or replacement of the environment.

  • Error using pretrigger when capturing more than one channel

    I am having problems acquiring data with pretrigger samples when capturing more than one channel, using NI-PXI-6071E hardware and Labview's Analog Input VIs (Legacy NI-DAQ).
    My goal is to trigger on one signal, while capturing another. Unfortunately, I cannot use the PFI0 for external triggering, as our cables/hardware have already been built, so I must use an analog input channel as the trigger. I understand that to do so I must capture both channels, and the channel that I wish to trigger off of must be the first channel in the list.
    If I trigger and capture on the same channel (tried 1-4) then it
    works great, regardless of the number of pre-trigger samples set. If I
    capture more than one channel (passing the trigger channel first), with no pretrigger samples set, then triggering and capturing both work fine. However, if I do the same with the pretrigger sample > 0 I get the following error:
    Error -10621 occurred at AI Control. Possible reason(s):
    NI-DAQ LV: The specified trigger signal cannot be assigned to the trigger resource.  
    I don't se any such limitation explained in the user manual, and searching the forum, I have found a few other people that had the
    same
    problem
    but they did not have solutions. Any ideas?
    Solved!
    Go to Solution.

    I'm sorry for double-posting this. I was trying to post it in the DAQ board and it kept ending up on the LabView board.
    If moderators have the ability to delete this thread you are welcome to do so.

  • Cheap way to record more than 12 tracks?

    Hi all!
    I´m looking for a lo-cost solution to record more than 12 tracks simultaneously. While 12 tracks is enough for most of my projects, I do some occasional live gig recordings where I take the feed from FOH mixing desk direct outs to my M-Audio FW1814 interface. More often than not 12 tracks is not enough so I am forced to leave out some channels, which I hate to do.
    However I don´t want to pay the extra cash for Logic Pro, since outside the track number restriction, the features of LE are more than sufficent for my needs.
    So I am thinking of using some other multi-track software for live recordimg and then exporting the tracks to LE for editing and mixing.
    Audacity claims to support up to 16 simultaneous tracks, but I haven´t been able to achieve that. I could be doing something wrong, since the documentation doesn´t really shed any light on the subject. Does anyone here use Audacity for multi-track recording?
    Any other alternatives? Keep in mind that I don´t really need any fancy features outside the recording itself.

    what version of LE are you using?
    i think that version 7.2 up'd the simultaneous IO of
    LE.
    I don´t think so. I browsed through the "New features in LE 7.2" document ( http://manuals.info.apple.com/en/NewFeatures_in_Logic_Express7.2.pdf )and didn´t find any mention about i/o. I´m using 7.1.1 or whatever the last update for 7.1 was.
    As NoEQ has mentioned M-Powered Pro Tools is at your
    disposal. If you search the internet you can find
    the academic version (included the dv toolkit) for
    $150 dollars.
    The problem is that I live in Finland and I doubt there´s any academic versions for sale here. And 150$ is still a bit much for me. This gig recording thing is really just a hobby for me, so I don´t want to put too much money (which I dont have anyway...) in it.
    you could just as easily send some of the tracks off
    the board to a bus and then record a sum of the bus
    and some out of the direct outs.
    Yeah, I´ve done that couple of times and it usually works fine, to be honest. But it is still a bit frustrating to not have the whole capacity of my hardware in my disposal, just because of an artificial software restriction.
    But thanks to everyone that have participated in this thread. I´m still considering my problem unsolved, so feel free to chime in.

  • Record more than 2 programs at once

    Now that more and more providers offer the ability to record more than 2 programs at once, will Verizon be following suit?

    walt178 wrote:
    BeBe wrote:
    Wow.......how do you record more than 1 program?  I'd love to record 2 programs but don't see any directions on how to do this.
    Thanks for any help available.
    Just schedule one;  then schedule the second.  No special instructions needed. 
    Note:  When recording 2 programs at the same time, you will not be able to watch a third channel because the DVR only has two tuners.
    While not being able to watch a live TV show when recording 2 shows you can watch an already recorded show (third show).
    If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

  • Difficulty getting Sound input configure and sound input to read more than 2 channels

    I need multichannel audio input for my project. I can't seem to read more than 2 channels of my audio interface.
    The interface Im using is an Alesis Multimix8 USB 2 mixer and and audio interface. This supports 10 channels in and 2 out. With other software I can read all input channels simultaneously without any difficulty. When I specify the sound input configure and sound input read, to read more than 2 channels any extra channel is a blank signal. Im using Labview 8.5 here.
    Solved!
    Go to Solution.

    Take a look here
    http://forums.ni.com/t5/LabVIEW/Play-waveform-express-vi-list-devices-on-front-panel/td-p/1559336
    Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
    (Sorry no Labview "brag list" so far)

  • Audio levels while capturing

    i would like to get rid of my huge yamaha audio mixing console and to work "only" within the computer.
    is there any way to enhance the audio level while capturing software-wise? very often i have dvd or S-VHS material that is around minus 20 dB ! ! ! with the maximum amount of 12 db within the mixer i cant really do that much.
    of course there is always the possibility to export to soundtrack pro or nuendo and to do all the audio levels there.... but for every day work this is just to to much work. i like to have my material digitized with proper levels.
    thanks for your input!

    Have you tried "send to soundtrack pro" w video? It's pretty cool. the soundtrack pro plugins work great for run of the mill stuff great little compressor and a great little limiter, plus you get to see your video with no doubt of sync relation ships. Other than that get a couple mic/line preamps and a clean compressor check out
    http://www.fmraudio.com/productspage.htm
    outstanding tools for the three times the price let alone the price point. handy for vo etc too.

  • How to Set Left/right audio channel while Video playback

    how can I controlling the left / right audio channel while video playback, I can't find any method or class for this in JMF, anyone that can direct me how to do it?

    The way I found to control two stereo channel is to implement a plug-in Effect that will control two volumes (left/right) indipandently.
    You can start from the example GainEffect from sun, and implement your control.
    For eample, if you want to mute the left channel, simply set to 0 all the odd samples (or even...I don't remember exactly, try it).
    You have then to add you plug in to the processor chain... again see the examples.
    More complex effects (panning etc) can be done in the same way, but it seems to me that it's quite CPU intensive.
    Bye
    Marco

  • I cannot acquire more than 5 Channels with the SCAN_op function

    Any time that i try to acquire data from more than 5 channels in labwindows CVI, i get an error that says "BadchanError - A channel, port or counter is out of range for the device type or the device configuration." I am using the function call:
    SCAN_Op (1,14,chan, gain, buffer2, 1400, 1000, 100);
    where buffer2 contains 1400 elements, chan contains 14 elements (0-13) and gain is an array of 1s. I initialized the card by using
    Init_DA_Brds (1, &b_code);
    do i need to perform more initializations? how can i make this function read 14 channels of data?

    Greetings,
    It appears that you are using the SCAN_Op function correctly. Do you receive this same error if you execute the SCANsingleBufSync.PRJ example with more than five channels? Additionally, what hardware are you using?
    Let me know.
    Spencer S.

  • Analog Source Triggering with more than one channel in channel list

    Hello,
    I am trying to use an analog reference trigger with a channel list that contains more than one entry using a
    M Series 6289. I am aware that this is generally not possible to have more than one channel in the list due to hardware limitations. I was hoping if some sort of workaround exists.
    I am using the NIDAQmx C API to control the card.
    Using a second card that is syncronized via RTSI should
    allow me to use an analog reference trigger to control multiple analog IO channels ... Right ???
    Thanks for any advice!
    Best regards
    Peter

    Hello Peter,
    If you look at the NI-DAQmx Help, Analog Triggering Considerations for E Series, M Series, and S Series Devices section, it says that to pause multiple channels with an Analog trigger, you must wire that signal to APFI0 or APFI1. Therefore, it is possible to perform this operation.
    If you are sharing the AI Sample Clock across RTSI, then you would be able to stop multiple AI channels across multiple devices with the one Analog Reference Trigger.
    I hope this helps,
    Sean C.

  • Record more than 2 programs...

    Is Verizon ever going to release a STB with the ability to record more than two programs at once?  I have two HD STBs sitting together and they handle my recordings.
    However, the down side is that I don't have the ability to cross check shows across the two units.  And I really have to pick and choose carefully as I don't want to end up with a conflict.
    If we could get a box that would do 4 recordings, then this would make life sooo much better!  Now, I have the power to schedule 4 shows at once on one unit and then I would only have to manage one receiver (STB).

    As of right now Verizon does not plan on releasing DVR's with more than two turners in it.  The only new plan for a DVR upgrade is to increase the storage to 320 GB.  in the first quarter of 2010.
    Frank
    Verizon Telecom
    Fiber Solution Center
    Notice: Content posted by Verizon employees is meant to be informational and does not supercede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or Plan.

  • I thought the NEW DVR's were supposed to be able to record more than 2 shows at 1 time

    I was told that the New DVR which is what i have, i guess its called a media center or something like that was supposed to record more than 2 shows simultaneously but found out last night that not to be true. I had 3 scheduled and 1 of them did not record.
    its next to impossible to make 1 show record at a later time, in the instance of a series because you would have to allow it to record 1st run and repeats. I don't want it to record older previous episodes. If I set it at only 1st run it would skip the later time becaue it is no longer 1st run it is now a repeat.
    there needs to be a better option available for series or truly allow to record more than 2 shows at a time.

    no-more-holds wrote:
    I was told that the New DVR which is what i have, i guess its called a media center or something like that was supposed to record more than 2 shows simultaneously but found out last night that not to be true. I had 3 scheduled and 1 of them did not record.
    its next to impossible to make 1 show record at a later time, in the instance of a series because you would have to allow it to record 1st run and repeats. I don't want it to record older previous episodes. If I set it at only 1st run it would skip the later time becaue it is no longer 1st run it is now a repeat.
    there needs to be a better option available for series or truly allow to record more than 2 shows at a time.
    If the media server you have (Arris VMS1100) is only recording 2 shows at once then you aren't signed up for enhanced service which does cost more per month.
    All new customers are getting the VMS boxes however you have to add the correct service to be able to record 6 shows at once. If you don't have enhanced then Verizon limits the box to be able to only use 2 tuners.
    If you want the 6 tuner option you have to upgrade through your account online or call them for them to add the enhanced service.
    I don't know if thats what you wanted and did order it and Verizon didn't configure your account correctly or not, but thats how it works.
    If you want to have 6 tuners and want to add the enhanced service all you have to do is this unless you'd prefer to call.
    Sign into your account online and go to add/change service. Once you are on the add/upgrade my services pages, on the left click on tv equipment & outlets. You should then see an option to add the enhanced service on it. If it is not there then you will have to call.

  • How to keep the Recent Call Record more than a week?

    How to keep the Recent Call Record more than a week? I found the iPhone only can keep the Recent Call Record for only a week.

    I have to disagree with your response with respect. My i phone is limiting me to call going back only 7 days ie today is 29 July and my call log will only go back to 22 July. I have only 40 calls logged for that period. I cannot view up to the 100 you mention. I have included all calls for a single caller as well ie one caller shows 7 so ive counted that as 7 calls. There appears no way to set up to 100 in the settings
    Thanks
    Graham

  • Whatapp can't record more than 10 seconds?

    Why my whatapp can't record more than 10seconds on my iPhone 5s 16gb?

    That would probably be a question best asked of Whatsapp support.
    http://www.whatsapp.com/contact/
    Regards.

Maybe you are looking for

  • Adding new fields in Item details screen in VA01 tcode

    Hi all, My requirement is to add custom fields in 'Additional Data B' tab of VA01 transaction. That is, after entering the material and quantity, if i double click tat material, it goes to item details screen. In taht, 'Additional data B' tab is ther

  • Photosmart 7520 entered incorrect email address on HP scan to email.

    Can't delete incorrect email because it wants my pin.  Keeps sending my pin to the incorrect email that I entered.  How can I delete this?

  • Syncing to iPhone: What the?

    Hey everyone, Within the last week or so, I've plugged my iPhone 3G into the usb port of my MacBook Pro, and whenever iTunes detects the iPhone, I get an error pop up on the screen. The error says something along the lines of "Cannot sync iPhone, thi

  • Function module to find wheather a user is heading any Org unit

    Function module to find wheather a user is heading any Org unit Hi Experts, I need to know if a user(SY-UNAME) is heading any Org unit(Check box marked for Head of own organisational unit in TCODE PPOMA_CRM for position in Basic Data). Is there any F

  • EDI Error Supressing

    We have a need to generate 997 Functional Ack for 856 inbound with AK5 status as E (Accepted with Error) instead of R (Rejected) for some data Error codes in (ST & SE segments only ) . To make this work ,we modified the SeverityConfig.xml file for ED