Record multiple, simultaneous sessions through one webinar meeting room

Is there a way to record multiple, simultaneous sessions through one webinar meeting room? I know breakout rooms can't be recorded, but is there another way to have users join a main webinar room, select a sub-room/session they're interested in, and then join that sub-session? We want to have four sessions happening at once and allow users to choose which they want to participate in. We'd also like to record the sessions. Thanks for any help you can provide.

Use PPT, or a tool of your choice, to create a slide/object with links to each room. Then the user can click between the rooms as desired.
You may want to use the ?launcher=false command at the end of the URLs to keep the individuals from having the add-in launched multiple times and in multiple rooms at the same time. This will keep the meetings in the individual's browser.

Similar Messages

  • Subscribing to new mail event of multiple impersonated user through one ExchangeService object

    I am able to subscribe to push notifications by specifying impersonating users' credentials and then specifying impersonated user's email in ExchangeService' ImpersonatedUserId property.
    However want to know how can I handle new email events on multiple email ids that are impersonated by one email id, since there is no collection as such on ExchangeService to specify multiple Impersonation Ids. In fact I think we can handle only one email
    id by using single ExchangeService object. And to subscribe to multiple user mail events, even through impersonation, I have to create multiple instances of ExchangeService. And also multiple callback listeners too. This is what I want confirmation about:
    Q. Do I need to create multiple instances of ExchangeService and callback listeners to handle new mail event on multiple user id with impersonation?
    Q. Without impersonation?
    Q. Also want to know given credentials of impersonating user, can I retrieve list of all users impersonated by that user.

    > Without impersonation?
    You don't need a separate instance in this case (you need separate subscriptions for each mailbox). However there are throttling limitations around the total number of subscriptions one particular user can make see http://msdn.microsoft.com/en-us/library/office/dn458788(v=exchg.150).aspx
    For
    subscribing to mailbox of same user id, we can use same object of ExchangeService. However I did asked for subscribing to mailboxes of
    different user ids (or simply multiple mailboxes) without impersonation.
    I cannot find how can I specify credentials for multiple mailboxes on single instance of ExchangeServer. Just following:
    service.Credentials = new WebCredentials(userid, password);
     Is it really possible to use same instance ExchangeService to subscribe to multiple mailboxes?

  • Multiple oracle session with one select

    Hi,
    When i run simple select statment oracle OPENS 5 different sessions and each session run same select .
    any body know what is wrong with it ,is there any parameter problem.
    HERE is a programe :
    ORACLE.EXE (P000)
    ORACLE.EXE (P001)
    ORACLE.EXE (P002)
    ORACLE.EXE (P003)
    ORACLE.EXE (P004)

    Basically my problem is that i am running an INSERT statement based on a SELECT statement on different tables.
    Now the problem is at times Oracle stops responding and my application hangs.
    I cannot find any other clue than the parrallel execution of INSERT statement by ORACLE.
    The reason i am considering this as an issue is when i check the status of my table on which i am running INSERT statement, they are locked.
    Below is sample peusdocode of my task.
    For each file
    begin
    open oracle connection
    read data from file using sql loader;
    insert into my tables based on select; ///// here after reading 1 or 2 files oracle hangs
    close oracle connection;
    end

  • How to open multiple sessions for one user?

    Sorry for the silly question but I couldn't find it googling or searching through this forum, so I started wondering whether it's possible in SQL Developer to open multiple sessions for one user. I'm fairly new to SQL Developer and databases in general.
    When I open SQL Developer and connect to a schema, a worksheet opens named MYSCHEMA. If I disconnect then connect, another worksheet opens, named MYSCHEMA~1. I assumed these were different sessions, but if I enter into one worksheet:
    select col1 from my_table where row_id = 1
    -- shows result is 1
    update my_table set col1 = 0 where row_id = 1
    select col1 from my_table where row_id = 1
    -- shows result is 0and then enter into the second worksheet:
    select col1 from my_table where row_id = 1
    -- shows result is 0I would have expected the second worksheet to report 1 because the first worksheet did not issue a COMMIT. Thus, I'd guess both worksheets are the same session? Is that right? If so, how do I have two sessions open simultaneously (opened by same user)?
    I'm trying to implement the code at the bottom of this post, for which testing requires at least two sessions:
    Re: Help with Procedure
    Edited by: tem on Apr 18, 2012 6:44 AM

    Thanks Jim,
    Ctrl-Shift-N doesn't do anything for me. I'm on a mac -- by experimenting it looks like command-N does what you're looking for. This appears to be the same as left-clicking on the "New" icon in the top left corner of SQL Developer, or selecting from the pull-down menu, File > New.
    This opens "Create a New" window that appears to be a wizard. What would I select at this point? Options are: Database Connection, Table, View, Package, ...
    I don't see an option for "Worksheet".
    UPDATE:
    OK, I found that if I select "SQL File", a worksheet becomes available. Perhaps this is what you intended. However, when I issue the command
    select col1 from my_table where row_id = 1;it still returns 0 instead of 1. Hmm, maybe my initial assumption was wrong -- if this is a second (e.g. different) session, should I expect the changes made in the first session in SQL Developer (the UPDATE command) WITHOUT a commit, to be observed in this second session? I thought that changes made in one session were not viewable in a different session until these changes are committed in the first session? If so, how to show this in SQL Developer? I must be missing something basic here.
    Or, is SQL Developer issuing some sort of "auto-commit" without my knowledge?
    Edited by: tem on Apr 18, 2012 8:00 AM

  • How do I record multiple midi instruments in Logic Pro simultaneously on separate tracks?sim

    Hi. I am trying to record multiple midi instruments simultaneously into Logic Pro 9 through a MOTU USB Fas Lane so that it is similar to recording a live band.
    Essentially:
    Track 1: Midi Keyboard - Motu Fast Lane Input A - Logic Pro - Software Instrument (Absynth)
    Track 2: Midi Drum Kit - Motu Fast Lane Input B - Logic Pro - Software Instrument (Battery)
    Neither Midi device can be set to a separate channel.
    I would have thought this was a really common application (recoding from multiple live midi sources like a band would normally do) yet it seems unnecessarily complicated.
    I gather what I would have to do involves:
    1) Going into the Environment.
    2) Creating a Physical Input
    3) Creating a Sequencer Input
    4) Placing a transofrmer between the Physical Input and the Sequencer Input
    Where to go ffrom there I have not got a clue!
    Any help would be appreciated.
    Incidentally I would also like to record two audio tracks at the same time as the midi track, but hoepfully that does not complicate things further.
    Thanks,
    Luke

    I have it set to Performance mode which according to the owners manual: "This mode makes the XP-30 function as a multitimbral sound
    source, and Performance settings can be modified. If you’re
    using an external MIDI device to control the XP-30 in this
    mode, it will function as a multitimbral sound source."

  • How can I record multiple tracks simultaneously?

    How can I record multiple tracks simultaneously?  Or rather what hardware do I need to do this?  I currently run guitars and mic into a PA and then the PA into Garageband.  But this is just one track.  I want to record the guitar as one track while simultaneously recording vocals as another track.  What hardware do you suggest - keeping it affordable?

    if you want to use your two chanel PA, pan 1 channel to the left, and the other to the right, and set one GB track to Mono 1 and the other to mono 2.
    if you want better quality, any two channel interface will work:
    http://www.bulletsandbones.com/GB/Interfaces.html

  • Inserting multiple records in a table through detail block

    hi,
    i am new to oracle forms. i want to enter more than one records in a table through a master detail forms.
    the records will be entered by user in the detail section. can any ody help me?

    Hi Lance,
    Try creating records in detail block in the when new block instance trigger of
    detail block. Set the validation unit property of the form to FORM before trying this.
    Hope this might be helpful to you.
    V.Senthil Kumar

  • Multiple (parallel) RFC Calls through  one connection?

    Hi SAP gurus,
    Is there a possibility for parallel RFC calls through one open connection via one SAP system user?
    As I know when calling RFCs it opens a new session and the dialog users have only 6 sessions permitted.
    Do you know any possible solution for this?
    Thanks a lot in advance

    Is this question about the SAP StreamWork APIs. I think you have posted to the wrong forum.

  • Having a problem when scrolling through one clip: a different clip scrolls through point and time simultaneously. Can you please assist us?

    Having a problem when scrolling through one clip: a different clip scrolls through point and time simultaneously. Can you please assist us?

    First question: this is a Captivate forum, are you sure that you have a Captivate problem (with cpvc or an imported video)?

  • Can I record multiple tracks simultaneously in v. 1.1?

    Hey, I found some instructions online about how to record multiple tracks simultaneously in version 3, but I can't figure out how to do it in the old version I have, 1.1. Any help is appreciated. I'm crossing my fingers and hoping this feature wasn't implemented later. I have a two-mic setup for podcasts, and need to record both on diff. tracks.

    Multi-track recording was added in v2
    From STP 2 Manual - New Features:
    Multitrack Recording
    With Soundtrack Pro 2, you can record across multiple tracks in the Timeline. (This is limited only by your hardware setup.)
    So, not available in v1
    Have you tried Garageband?

  • Using multiple agents through one webgate

    How can we use multiple agents through one webgate.when i copy a file OBACESSCLIENT.XML its gets overwritten what should i do.

    This is trivial to do - just don't use Finder aliases.
    Aliases are Mac OS X-specific and UNIX-based applications like apache don't know how to deal with them.
    The solution is to use symbolic links, the original UNIX equivalent of the Mac's aliases.:
    <pre class=command>$ cd /Library/WebServer/Documents
    $ ln -s /Volumes/User1Drive user1
    $ ln -s /Volumes/User2Drive user2
    ...</pre>
    etc.
    This will create a symbolic link from user1 to /Volumes/User1Drive. Now when anyone hits /user1 on your server they'll given the content on /Volume/User1Drive.
    There is an alternative solution which doesn't use directory paths, but hostnames. It's possible to configure Apache's virtual hosts so that 'http://user1.server.com/' is based on /Volumes/User1Drive while 'http://user2.server.com/' is based on /Volumes/User2Drive, and so on.
    This takes some configuration in DNS to point all the hostnames to the same IP address, but it's another option that can scale without the need of more IP addresses.

  • Recording multiple Real Instruments simultaneously

    I am new to this forum. After having my iBook G4 for several years, I'm just getting around to trying Garage Band v1.1.0. After reading the tutorials, I can't find anything in there about recording several instruments at the same time. Can this version record multiple tracks? What sort of audio interface would I need?
    Thanks!

    In your recording settings (File > Song Settings > Recording), check 'Auto Demix by Channel if Multitrack Recording'. Then adjust the Channel parameter of each instrument track (in the Object parameter box on the left) to the MIDI Channel of the corresponding MIDI Controller.
    That's it. ███████

  • How to process multiple messages through one url over https

    Hi,
    My scenario is HTTP to IDOC, and the vendor will send different messages through one url to SAP system.
    is there any way to achieve this?
    Thanks
    Jessica

    can the Vendor at least pass URL parameters ? Normally, when you have several messages interfaces, the HTTP sender system should distinguish them with the URL parameters (party, namespace, interface). By that, XI then knows how to handle those messages, and can start its receiver determination pipeline. See SAP Help for HTTP sender channel:
    Queries entering the plain HTTP adapter must have the following syntax:
    http://<hostname:port>/<path>?<query-string>
    The query string contains the following data:
    ●      Sender namespace ?namespace=<namespace>
    ●      Sender interface &interface=<interface>
    These details define the sender interface.
    ●      Sender service &service=<service>
    Specifies the sender service.
    ●      Sender party (optional) &party=<party>
    CSY

  • Need help in recording multiple seperate tracks

    hello, i've used cool edit and now audition to record for the last eight years or so. however, i've never gone byond tracking more then one mic at a time in the past. with some upcoming projects i will be tracking a full band and need to record multiple mics (most challenging being drums) and i need to be able to assign each mic to its own seperate track in real time.
    i will be using a PreSonus firebox which was four inputs. i can make do with four mics just fine. my only problem is i can't find any info and i'm not even sure audition allows for simultaneous multi channel recording. it is imperative i be able to have separation for each mic for mixing. any advice/help? will i be forced to find another program?
    thanks in advance,
    joel

    Audition handles multitrack recording just fine.
    You don't say what version of Audition you have (there are variations in how to set up the recording) but if you're on the current 3.0 version, you'd:
    Under Edit/Audio Hardware Set up, click on the Multitrack tab at the top.  On the "Audio Driver" menu, select the appriopriate Presonus driver.  Under "Default Input" Select the Presonus interface.  Also select it on the Output menu if you want to outuput sound that way for monitoring.  Click Okay.
    Go to Multitrack view in the main programme.
    Work down the inputs for each track (marked with a right-facing arrow) and select "Mono" and the Presonus output you wish to go to that track.  If you want to output back to the Presonus, do the same with the output selection, otherwise just leave it to "Main".
    (At this point, I suggest you save a session as "Basic multi setup" or similar to make it faster for the next take--then do a "Save As" for the actual recording you're about to do.)
    Click the "R" button on each track you wish to record in (you don't have to do all tracks every time) to arm for record.
    Click the main Record button to actually start recording.
    If you have an earlier version of Audition or Cool Edit Pro, the procedure is similar but some of the controls are accessed in different ways.
    Bob

  • Multiple View sessions, same PC?

    View 6.0.1, Client 3.3.0
    Can I have multiple View sessions from the same PC? In other words
    Launch the Horizon View client, login, and access a desktop
    Launch the Horizon View client again, login as a different user, and access a different desktop
    Repeat until I have many session open at once
    The reason I ask is we are migrating from Exchange to Gmail. Google provides a utility called GAMME that in a larger environment can be run from multiple machines with each machine migrating one portion of the alphabet. Rather than using 10 physical machines I would rather use 10 View desktops. This will work slick if from my real PC I can access all 10 view desktops. I will be using a different login account to access each desktop.

    Have not tried yet. I did not want to go through the time setting up a separate non-persistent desktop pool if I could not login to more than one desktop at the same time. Now that I know it will work, I will run with it. Thanks for the help

Maybe you are looking for