Record Narratives OF Intrection Record

Hi
I have one requirement , where I need to
generate interaction record narrative for every click/action that the adviser makes within SAP CRM and also with the back end .
Thanks in advance

Similar Messages

How can I record narration with no video or beyond the end of my video in iMovie?

I have a question about recording narration in iMovie.
I wrote a script to read as the narration for a movie I'm making. My thought was I could record the narration first, then add video to match the spoken words.
I've done this before in Sony Vegas on my PC and it worked out well, better than trying to speak to what was going on in the video after I record the video.
Unfortunately, if I try to record narration in iMovie without any video being there yet, it won't record. It appears I need to put a video clip on the timeline first.
If I put a short clip in and try to record narration beyond the end of it, iMovie quits recording at the end of the video clip.
So I went to quicktime and recorded my narration there and have 10 audio files (since I just don't seem to be able to read this whole script without making mistakes).
I then tried to add all 10 to my movie and I think it made me add a video clip first, but after I did, iMovie overlayed all 10 audio files on top of each other.
If I try to drag them over one at a time, I still can't get them to go sequentially unless I add more video to my movie.
There must be a way to add audio files or create narration without having to create a video file longer than your audio first. Isn't there?
I just can't seem to find a way to get the audio files layed out one after another without more video. Very frustrating.
At this point, I really want to know how to add audio files beyond the end of my video since I have them all recorded.
But I'd also like to know how to record narration beyond the end of the video too for future projects.
Thanks!
Brad

You could insert a bunch of placeholders in the timeline before doing the voiceover.
You can find a range of placeholders (they are actually templates used in iMovie Trailers) in the Maps, Backgrounds & Animatics browser. This is the last browser at the end of the centre toolbar, after the Titles and Transitions browsers. Click on it and scroll down to see all the animatics (aka placholders or templates). Drag a number of these into your project timeline - as many as you think you need to cover your audio.
When you've finished the voiceover, drag photos directly onto the animatics and select Replace from the pop-up menu. Adjust the timing by using the Inspector (double-click a photo to open the Inspector, then change the duration).
John
EDIT: Sorry, beaten by Bengt (again)!
Message was edited by: John Cogdell

Recording Narration for Keynote?

According to the KN User Manual, each KN slide can be narrated with an audio file so that the audio plays for that one slide only and stops when that slide leaves the screen. But the user manual does not say how to record this narration. Is there a way to record narration, one slide at a time, using a UBS mic, directly into Keynote as I'm building the presentation?
Right now.... my procedure is to export the KN, no audio, presentation as a QT movie: DV NTSC Low Quality compression, at 8fps. (Any other frame rate and the QT movie is not the same length as the Keynote Presentation. I made a one minute test of this and only changed the frame rate settings. 8fps gave me a 1:00 QT movie, but 29.97fps gave me :58. Over time, this two second loss can really add up!)
I then imported that low video quality QT into Final Cut and used the voice over tool and a USB mic to record narration as each slide rolled by. I then exported just the audio track, since the video was just there as a low quality guide, and I then put that audio track in iTunes.
I then went back to the original high quality Keynote presentation and dropped the narration track into the first slide with the media option. For at least the one minute test, everything was in sync through ten different slides.
Is there an easier way for me to get narration into a Keynote presentation?
Thanks, Steve

Thanks Richard,
I did what you suggested, but instead of using QT pro, I used SoundStudio, which will also allow me to record through a USB mic. I then added an audio file to each individual slide. I did this for a ten slide test, but for my wife's 100 slide presentation I can see how that would take up a lot of time!
Still, your system of audio files (builds) added to each slide worked fine although I'm still testing out the refinements. It seems that once the audio is on the slide, the preference is towards the audio. By that I mean if you have a 12 second slide and you add 14 seconds of audio then the slide will stay on for at least 14 seconds before it makes a transition. Even though you may have set the slide to transition after 12 seconds. The audio won't get cut off. The other thing I see is that after the audio stops playing, there's too much of a delay before the transition kicks in.
I'll have to look into that.
The other route I took was making a Keynote presentation, exporting it as a low quality QT self playing movie, importing that movie into Final Cut Express, adding voiceover to the total running time of the presentation, and then exporting just the audio track as an aiff auido file. I then took that aiff audio file, went back to the high quality Keynote and dropped that track into the audio well to sync up with the first slide. All worked well with everything in sync, in Keynote. I then exported both audio and video as a QT movie and the audio fell out of sync. After 60 seconds the audio ended up 2 seconds longer than the video. Over time this could kill the project.
So..... if I have to do a lot of narration on slides I might buy QT Pro and drop the audio in as build objects for each slide. Hopefully I can work the other timing bugs out.
Any idea what went wrong with the sync when I exported a QT movie out of Keynote?
Steve

Recording narration with keynote

I've got a big keynote presentation of about 90 slides with plenty of compositions and transitions, and all my narration is written down in comments. I've already given that presentation but now I would like to publish it so that people who couldn't attend can catch-up. The first thing I'd like to do is a video of my slides with my narration on top of it.
I thought it would be simple but I can't find a simple way to do it.
So how can I actually record both video and audio output when playing this keynote and produce a video out of it? Of course exporting in flash or quicktime doesn't work because I can't control when slides are changing.
Macbook Pro 17" Mac OS X (10.4.9)

I highly suggest that you try out Profcast. I have been using it to record narration with my presentations and I am pleased with the results.
http://profcast.com/public/index.php
Here is an example that I recently did with profcast:
http://balticsojourn.com/files/672f9e3eb22699506f46fb1ec92fcea9-7.html
mini, 1.42 g4 Mac OS X (10.4.2)

Can Keynote 3 record narration for slides (like PowerPoint)?

Does anyone know if it's possible to record narration for selected slides in Keynote 3? Unfortunately, this much-desired feature was lacking in Keynote 2 (it could only play one audio file through the entire presentation). FYI, PowerPoint has this feature already, but it is then limited by an inability to export to Flash or QuickTime... Thanks!

Thanks, nanotechmama! On your lead, I looked up the User's Guide and found this additional clarification:
"Adding Narration and Other Audio
You can add music—a file or playlist from your iTunes music library, or any other sound file—to a Keynote document. You can add sound as a soundtrack for the entire slideshow, or you can add sound to a single slide.
If you add a soundtrack, the music starts playing when the slideshow starts. You can specify whether to play the audio once or repeatedly (or you can turn it off ).
If you add a sound file to an individual slide, the sound plays when the slide appears and stops when you move to the next slide. You could, for example, record narration for each slide as an MP3 file; this technique is especially useful if you plan to export the slideshow as a self-playing QuickTime movie. (For more information, see “PowerPoint” on page 167.)
Note: To make sure that the audio plays on other computers, “Copy audio and movies into document” must be selected in the expanded Save dialog. This option is on by default."
So it looks like it might be possible to add a different narration file to each slide. I've therefore ordered a copy of Keynote 3, and I'll confirm in a week or so (once I receive it) whether this is indeed so.

Recording Narration

When I try to record narration, I get a message that says "Cannot record because one of the record-enabled tracks is locked in the timeline" Please help.
Dave

Dave
Have you confirmed that the issue is confined to this one project? As a mini test run, can you open a new project and move along in it with the issue?
If you have not already, try deleting the Adobe Premiere Elements Prefs file.
I am almost certain that with Premiere Elements 11 Mac the Adobe Premiere Elements Prefs file should be found
Users/User Name/Libraries/Application Support/Adobe/Premiere Elements/11.0 Folder
Also is this an Adobe Premiere Elements 11 Editor from the Mac App Store or a Premiere Elements 11 Mac from Adobe. Lots of problems with the Mac App Store offering which is now discontinued.
More later.
Thanks for looking at the suggestions.
ATR

Premiere Elements 10 has stopped recording narrative.

I have used Premiere Elements 10 to make a number of home videos on my 2013 Dell XPS 8500. Never had a problem. This time I am unable to record/insert Narrative into the Narrative Track. The program recognizes the mic (which I have always used). I check the "enable" box. The Record Voice Narrative box recognizes the mic and the volume meter flashes indicating it is picking up sound....but when I hit the red record button and commence to narrate....nothing shows in the Narration track and nothing is recorded in the Media. Is there a fix? I can add a soundtrack and the Audio from the clips work as they should. I can see nothing amis there.

Clearwater1950
I will think about this in the morning.
Please check to determine if any of the following applies to your situation at any time.
http://www.atr935.blogspot.com/2013/07/pe-narration-recording-stops-after-30.html
The narration is not going to turn up on the Narration track until you have hit Stop in the Narration dialog. Is that what you are
saying? At one point it sounded like you were expecting to see the narration clip in the Narration track while recording it was still in
progress.
What happens if you start a new project and create narration with the Narration Tool? Still the same narration issue?
More later.
ATR

Recorded Narration Playback level

I am using Captivate 2
I record narration using a good microphone
while capturing Software Simulation of an Windows
application.
I keep my voice level during recording constant.
To explain different features of the application,
I have to re-size Panels within the application.
After completing recording, I publish it in Flash.
I have noticed that during playback, narration volume drops
drastically
when panels are re-sized within application. Once volume
drops
it stay at that level to the end of the presentation.
Audio is recorded at 64 kbs, 22.050 khz, encoding speed 9.
Overall Captivate 2 has been a very unstable, very buggy
software
unlike other Adobe products.
Any suggestion to correct fluctuating audio output during
playback??
Please don't tell me to upgrade to Captivate 3 -
I want first Captivate 2 to perform as advertised - at lease
do basic job of capturing well
Thanks.

Welcome to our community, PrintHelper
Yes, it would be very nice indeed if software never had any
issues, but I digress.
You might wish to consider recording your audio separately
from the recording of the project. That's what we normally consider
best practice. When you think about it, Hollywood never records the
actors talking while filming the set. The voice is handled
separately. There is a reason for this. It's because you get better
results.
In addition to suggesting you record the audio as a separate
action, I've seen others suggest that the best results are achieved
by recording using a separate application. One such application is
called Audacity. The good news is that it's open source and one may
obtain it at no charge. To visit the Audacity site,
Click here.
Cheers... Rick

When I try to record narration in keynote on my imac I cannot escape out of this screen. I have to force quit out of keynote. This makes it impossible for me to use.

When I try to record narration in keynote on my imac I cannot escape out of this screen. I have to force quit out of keynote. This makes it impossible for me to use.

Click the record button to stop recording.

Record narration in Powerpoint 2013 with returns to previous slides

Hi,
I am trying to record narration on a Powerpoint slide show (Powerpoint 2013). However I discovered that I can go only forward with slides. When I return to a previous slide the audio simply overwrites the narration of the first visit to the slide.
I s there any way to have Powerpoint store multiple audio segments and the timing on returning to previous slides ?
Thanks

Hi,
Could you please tell me how do you record narration in PowerPoint 2013? Do you use record slide show from Slide Show?
If yes, it records narration on each slide not by time. This is why you return to a previous slide the audio simply overwrites the narration of the first visit to the slide.
For more reference about record slide show:
http://office.microsoft.com/en-us/powerpoint-help/record-and-add-narration-and-timings-to-a-slide-show-HA010338313.aspx
Or we can try steps mentioned in following article:
http://blogs.office.com/2011/03/02/the-secret-to-converting-your-presentation-into-a-video/
Feel free to post back.
Regards,
Greta Ge
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Record narrative get msg "The specified capture destinatin file already exi

Tried this morning to record narrative when I got this message: "The specified capture destination file already exists". How do I resolve this? Thanks Rich

Hi(Bonjour)!
If you previously recorded a voice over with the same name (in the same project), that's why there is file with the same name.
If you use a completly new name, FCE will increase for all subsequent takes.
Michel Boissonneault

Recording Narration Adobe Elements 13

Hi
I have recorded a narration into my video in elements 13 and unfortunately I can not hear anything when it plays back. Is there a specific microphone to use for recording narration? Please help

Hi,
Have you tried this page?
https://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html
Which operating system?
Brian

Difference between empty plsql record and null plsql record

Hi there,
I am kinda getting confused with empty plsql record and null plsql record.
How do I assign plsql record to be empty and to be null?
create type emp_obj as object (enum number, ename varchar2);
CREATE OR REPLACE TYPE emp_type AS TABLE OF emp_obj;
Thanks

First of all, do not use term PL/SQL record in this context. Record type in PL/SQL is completely different from object type. Secondly, there are 2 states of a nested table:
1. Unintialized:
SQL> create or replace
2    type emp_obj_type as object(enum number, ename varchar2(10));
3 /
Type created.
SQL> create or replace
2    type emp_tbl_type as table of emp_obj_type
3 /
Type created.
SQL> declare
2      v_emp_tbl emp_tbl_type;
3 begin
4      v_emp_tbl.extend;
5 end;
6 /
declare
ERROR at line 1:
ORA-06531: Reference to uninitialized collection
ORA-06512: at line 4
SQL> 2 Empty:
SQL> set serveroutput on
SQL> declare
2      v_emp_tbl emp_tbl_type := emp_tbl_type();
3 begin
4      dbms_output.put_line('Nested table v_emp_tbl has ' || v_emp_tbl.count || ' element(s).');
5 end;
6 /
Nested table v_emp_tbl has 0 element(s).
PL/SQL procedure successfully completed.
SQL> NULL aplies to nested table element, not to nested table itself:
SQL> declare
2      v_emp_tbl emp_tbl_type := emp_tbl_type();
3 begin
4      v_emp_tbl.extend;
5      if v_emp_tbl(1) is null
6        then
7          dbms_output.put_line('Nested table v_emp_tbl first element is NULL.');
8      end if;
9 end;
10 /
Nested table v_emp_tbl first element is NULL.
PL/SQL procedure successfully completed.
SQL> SY.

Loading multiple physical records into a logical record

Hello,
I'm not sure if this is the right place to post this thread.
I have to import data from a fixed length positioned text file into a oracle table using sql loader.
My sample input file (which has 3 columns) looks like:
Col1 Col2 Col3
1 A abcdefgh
1 A ijklmnop
1 A pqrstuv
1 B abcdefgh
1 B ijklmn
2 A abcdefgh
3 C hello
3 C world
The above text file should be loaded into the table as:
Col1 Col2 Col3
1 A abcdefghijklmnpqrstuv
1 B abcdefghijklmn
2 A abcdefgh
3 C helloworld
My question: Is there a way tht i can use the logic of loading multiple physical records into a logical record in my oracle tables. Please suggest.
Thanks in advance.

Hi,
user1049091 wrote:
Kulash,
Thanks for your reply.
The order of the concatenated strings is important as the whole text is split into several physical records in the flat file and has to be combined into 1 record in Oracle table.
My scenario is we get these fixed length input files from mainframes on a daily basis and this data needs to be loaded into a oracle table for reporting purpose. It needs to be automated.
Am still confused whether to use external table or a staging table using sql loader. Please advise with more clarity as am a beginner in sql loader. Thanks.I still think an external table would be better.
You can create the external table like this:
CREATE TABLE     fubar_external
(      col1     NUMBER (2)
,      col2     VARCHAR2 (2)
,      col3     VARCHAR2 (50)
ORGANIZATION EXTERNAL
(       TYPE             ORACLE_LOADER
     DEFAULT DIRECTORY XYZ_DIR
     ACCESS PARAMETERS (
                             RECORDS DELIMITED BY     NEWLINE
                      FIELDS (   col1        POSITION (1:2)
                                  ,   col2        POSITION (3:4)
                           ,   col3        POSITION (5:54)
     LOCATION        ('fubar.txt')
);where XYZ_DIR is the Oracle Directory on the database server's file system, and fubar.txt is the name of the file on that directory. Every day, when you get new data, just overwrite fubar.txt. Whenever you query the table, Oracle will read the file that's currently on that directory. You don't have to drop and re-create the table every day.
Note that the way you specify the columns is similar to how you do it in SQL*Loader, but the SEQUENCE generator doesn't work in external files; use ROWNUM instead.
Do you need to populate a table with the concatenated col3's, or do you just need to display them in a query?
Either way, you can reference the external table the same way you would reference a regular, internal table.

Concatenate multiple records into one single record

Hello everyone,
Can anyone guide me how to merge multiple records into one single record
like......... I am getting the data in the file like
aaaaa/bbbbbbb/ccccccccccc/dddddddddddd/eee
ffffff/gggg/hhhhhhhhhhhhhh
/123/4567/55555/99999999/kaoabfa/eee
fffff/kkkkkkkk/llllllllllllllllllllllll
when i use gui_upload I am getting the data into the internal table in the above format.
My main intension is to split the record at / to multiple lines and dowload it into another file.
What i am planning to do is... if the line does not start with / then i want to concatenate the multiple lines into single line and then split it into multiple records. Can anyone guide me how to achieve this.

Yes, it should work.
In my example
Loop at itab.
concatenate i_text itab into i_text.
endloop.
You change that loop for the loop of your internal table with the file records
So if you have this three records
'aaaa/bbb/ccc'
'/dddd/efg'
'hijk/lmn'
i_text will look like this at the end
'aaaa/bbb/ccc/dddd/efghijk/lmn'
then in this part of the code
split i_text at '/' into table itab2.
itab2 will have the records looking like this
aaaa
bbb
ccc
dddd
efghijk
lmn'

Record Narratives OF Intrection Record

Similar Messages

Maybe you are looking for