Record on Single Slide /1 at-a-time!

I would like to record my slide 1 at a time. Can this be done? If not, how does one record a slide show and make the necessary edits along the way?

Here's a screenshot of what i mean below:
I have Camera RAW 8.2.
So at the top you see the one image processing. On CS5.5, three images processed at once, so I was surprised to see this in CS6.

Similar Messages

Cannot record Full Motion slides EVER

I recently upgraded to v.3 from 2 since I thought this would
take care of the bugs that plagued my Captivate 2 experience. While
they were annoying, I could still work around those issues
comfortably and get my work accomplished.
However after upgrading to v.3, I have not only been seeing
the same bugs as before, but now I am encountering a whole series
of new issues. My biggest problem is that I can't get Captivate to
do FMR, ever:
- It won't record full motion slides when I scroll a web page
or drag and drop something.
- It won't do it during demo mode even if I force it with F9
and F10 (I only end up with regular slide captures where the full
motion slides should be).
- If I put Captivate in Full Motion Recording mode, it
records a single plain slide, regardless of how long I ran the
capture session for.
Any assistance you could provide would be greatly appreciated
as I am not having the best luck with your tech support helpdesk
(long hold times and dropped calls). We use Captivate exclusively
for our course development and getting this feature to work is
crucial to us. If I can't get this fixed - any way I can get a
downgrade back to v.2?
Thanks,
Daniel

All, I have discovered the last Captivate update (which is
causing caption text formatting issues) is also responsible for my
issue with Full Motion Recording. I did not notice this at first
since Captivate updated almost immediately after my first reinstall
so I continued to observe the issue. The only solution I have found
is to reinstall the software and then delete the AdobeUpdater.dll
library file in the Captivate directory in the Program Files
folder, which forcibly disables the Adobe Updater - I haven't found
any other way to do this.
It's kind of frustrating since I will need to watch out for
the next update that will fix what was broken in the last one and
once that is out, reinstall the software to add back the updater. I
share the frustration that I see from many of the users here - most
of the "solutions" to Captivate issues that I read on this forum
are no more than hacks, and I wish that the software could just
work properly - that way, I wouldn't need to "fix" my issue with
the latest update through a hack like reinstalling and deleting the
updater library.
Adobe, during future product design, please consider that
maybe your users would like the ability to disable updating when
you push out updates that break your own products.

In Keynote, how do I put more than one image on a single slide?

I would like to put 2, 3, or 4 “pictures” on a single slide, and program them with transitions so that they could pop-on or dissolve one at a time. Is it possible to put more than one image placeholder on a slide?

Yes. Just copy-paste the placeholder that the theme has, multiple times.

Recording more than one track at a time...

Ok, so heres my problem.
This is going to be my future setup...
for recording drums of course.
so I'm going to have around 6 microphones. A mixer, and i already have an interface. And of course i use soundtrack pro.
so if the microphones are all plugged into the mixer, and the mixer into the interface and the interface into the computer... wouldn't all the 6 microphones be one track on soundtrack pro? i mean... you can only do so much editing on a mixer. It would be very nice if i could edit every single mic separately.
so in conclusion...
i want to record 6 tracks all at the same time with every single track a different microphone.
if that is not possible, could somebody maybe tell me how i could do something relatively close to that.
thank you.

You have to set each track to a unique channel. Open track info and select Channel 1 for one of the tracks, and Channel 2 for the other.

Can Keynote 3 record narration for slides (like PowerPoint)?

Does anyone know if it's possible to record narration for selected slides in Keynote 3? Unfortunately, this much-desired feature was lacking in Keynote 2 (it could only play one audio file through the entire presentation). FYI, PowerPoint has this feature already, but it is then limited by an inability to export to Flash or QuickTime... Thanks!

Thanks, nanotechmama! On your lead, I looked up the User's Guide and found this additional clarification:
"Adding Narration and Other Audio
You can add music—a file or playlist from your iTunes music library, or any other sound file—to a Keynote document. You can add sound as a soundtrack for the entire slideshow, or you can add sound to a single slide.
If you add a soundtrack, the music starts playing when the slideshow starts. You can specify whether to play the audio once or repeatedly (or you can turn it off ).
If you add a sound file to an individual slide, the sound plays when the slide appears and stops when you move to the next slide. You could, for example, record narration for each slide as an MP3 file; this technique is especially useful if you plan to export the slideshow as a self-playing QuickTime movie. (For more information, see “PowerPoint” on page 167.)
Note: To make sure that the audio plays on other computers, “Copy audio and movies into document” must be selected in the expanded Save dialog. This option is on by default."
So it looks like it might be possible to add a different narration file to each slide. I've therefore ordered a copy of Keynote 3, and I'll confirm in a week or so (once I receive it) whether this is indeed so.

Recording over several slides

Hello Everyone!
I am completely new to Captivate 2 and I am having difficulty
with a few things.
1. I thought when I recorded a section that section would be
one slide. That section ends up being many slides, is there any way
to record a large sections that is one slide? Is this a capability
in Captivate 3?
2. Is there any way to record without having those bubbles
pop-up that say what to click? Can I edit the text that is
displayed in the pop-up bubble?
3. When I record the audio for a section and select to have
it go over several slides, how do you specify which slides for the
audio to go across? It ends up going across all slides that are
left in my project.
Thanks,
Amanda

Amanda said ...
quote:
1. I thought when I recorded a section that section would be
one slide. That section ends up being many slides, is there any way
to record a large sections that is one slide? Is this a capability
in Captivate 3?
If you mean you want multiple actions to appear
on a single slide - let's say, the act of opening a file opening
the File menu, navigating to the file with Windows Explorer,
selecting it, then opening it ... this would constitute at least
3-4 background changes, and each would be a separate slide. But I'm
confused, Amanda, because your Topic Subject indicates you have an
audio question, and this doesn't seem to fit that description ...
Anyway, if you want all those actions to appear on a single
slide, you can use *full-motion* to capture the entire process
(press F9 to start and F10 to stop recording). I recommend against
this, because it is counter to the designed purpose of use for
Captivate, but ... maybe you can tell us why it is important to
have a *section* all on a single slide. And maybe you can advise
what you define as a *section*?
2) Yes, you can eliminate the automatic text-captions by
changing the options selected for recording. They are inserted as a
*default* addition when you are recording a *Demonstration*. The
text can be edited by going into the application files to make
changes, but I wonder if this might be *running before you can
walk*, as it can be dangerous changing program files, and is
definitely for advanced users ...
3) You can edit the *Timing* of audio by going to the Audio
menu and selecting EDIT TIMING. I would eliminate this concern by
adding audio to your project as a step in the editing process, as
opposed to using the *Narration* option during Recording. Uncheck
the *Narrative* election for Recording, then during Editing, go to
the first slide requiring audio, and insert the audio there, then
move to the next slide, add audio, and so on.
Hope this helps, Amanda. Your question(s) are multiple, and
varied in subject matter, so I've just given you over-views and
hope that will help you get started. A last though ... watch the
tutorial movies included on the Main UI (user interface). There
should be some help there, also.
Draw fast, shoot fast, but aim slowly.
Larry

How to publish a single slide?

I have a Captivate project with about 20 slides, and I want
to publish a single slide at a time. That is, I want to make 20
separate SWF files. Is there a way to do it without having to
delete 19 of them and publish one at a time - deleting all but the
one I want each time?
Thanks!

Hi benhenny
I'm not sure why anyone would want to do it this way, but I'm
sure you have your own reasons.
I think you could do it like this:
In the Filmstrip or the Storyboard, select all slides except
one.
Edit the properties and hide the selected slides.
Publish the single slide.
Unhide the next slide.
Hide the one you published earlier.
Publish the single slide.
Repeat the process until all slides have been individually
published.
Hopefully this helps... Rick

Rerecording Narration for a Single Slide

I've recorded the narration for a long slideshow (without Keynote) and I need to rerecord the narration for a single slide. When I read the help files, they read as though I will wipe out everything after the slide I record. Please tell me that's not true and that there is a way I can record new narration for a single slide. Thanks.

The term "narration" has a very specific meaning in Keynote: it refers to a spoken (usually) track that accompanies an entire slideshow, running through all of the slide changes.
If you want to record a "voice-over" (VO) track for a single slide all you need to do is record this off-line (for example in Garage Band or any other audio production application) and then import this as an audio file into the individual slide. Use the Inspector > Build-in > start audio to initiate playback within the slide.
Caveats: 1) This will play only while the specific slide is on the screen. IF you change the slide, the VO track will stop. 2) It will play simultaneously with any Soundtrack or Narration tracks you have assigned to the overall slideshow, and you have no way to control the relative balance between them. So, if you do have either (or both) a Soundtrack and Narration for your program, you will need to record these such that they leave room (either by fading out/in or reducing level) for this specific VO track.
Good luck.

How can I restore a single image from an aperture time machine backup, do I have to restore the entire library? that does not make sense

I hope there has been found a more efficiant solution for this, how can I restore a single image from an aperture time machine backup, I really hope I don't have to restore the entire library? that does not make sense
any suggestions?

Did you try browsing your backups in the Finder ? That is, do not go and "Enter Time Machine". Instead, navigate to your Time Machine backup via Finder and then manually go to the time period (by folder name) you are looking for ... when you find your Aperture library you can then "Show Package Contents" and find the Master you are looking for.

Recording Audio and Midi at the same time in Logic 7 Express Can it be done

I am wondering if I can record audio and midi at the same time in Logic 7 Express. I am running my guitar thrugh a Roland GR 33, and a line out and using the GR 33 to trigger sounds in the Logic's synth section but cant seem to record all three tracks at once. If any one knows how let me know. Oh and I am running the GR Synth and Guitar into the Prosonus Fire Fox and have the GR 33 out midi to the Fire Box as well. So I guss the question is how do I sent up two audo tracks and one midi track to record in real time. Thanks Victor

I am wondering if I can record audio and midi at the
same time in Logic 7 Express. I am running my guitar
thrugh a Roland GR 33, and a line out and using the
GR 33 to trigger sounds in the Logic's synth section
but cant seem to record all three tracks at once. If
any one knows how let me know. Oh and I am running
the GR Synth and Guitar into the Prosonus Fire Fox
and have the GR 33 out midi to the Fire Box as well.
So I guss the question is how do I sent up two audo
tracks and one midi track to record in real time.
Thanks Victor
Try arming the audio tracks, select one of the tracks, then while holding down the shift key, select the midi track you want to record, arming the "r" on the midi track. Press "record".....
HL

Multiple buttons on a single slide each connecting to a different url

Using a trial version of Captivate 7. I have a handful of slides where the customer wants to open different forms via url. I tried using a button for each link, inserting the url and using the "enter" key for each of the multiple buttons. Works fine with the mouse but for 508 folks who tab to the URL and hit the enter key ......... I get many instances where the incorrect url is activated. Is there a way around this without assicning a different shortcut key for buttons where thare are more than one on a single slide? Thanks

Welcome to AD!
Here is an article on using multiple ipods. I suggest method 1 and steer clear of method 3.
http://support.apple.com/kb/HT1495
For your point #1, sharing music on same PC between users, put it in a shared library & set permissions as directed here
http://support.apple.com/kb/HT1203
For #2, itunes doesn't have the capability to monitor folders for new content. You'll need to get something like the free program 'itunes folder watch'.

Writing multiple arrays to a single xml file at seperate times without overwriting the previous file?

Hi my name is Dustin,
I am new to labview and teststand... I am trying to right multiple arrays of data to a single xml file. I can do this with a cluster but I have to create a variable for each of those arrays (21 arrays) and I was hoping to use the same variable for each array. Meaning I obtain my array of data write it to an xml file then replace that array in that variable with a new array and then call up my VI that writes that array to an xml file and write it to the same xml file underneath the first array without overwriting it. Attached is my VI I created to write an array to an xml file. Again I am wondering if there is a way to write multiple arrays to a single xml file at different times without overwriting the previous xml file.
Thanks
Solved!
Go to Solution.
Attachments:
Write_to_XML_File.vi ‏11 KB

Hi dlovell,
Check the attached example. I think it may help you.
Regards,
Nitz
(Give Kudos to Good Answers, Mark it as a Solution if your problem is Solved)
Attachments:
Write to XML.vi ‏17 KB

How do I record more than 2 tracks at a time with my new board?

I just bought a new Behringer x2222usb board and I still can not record more that 2 tracks at a time. Are there drivers out there that I'm missing? How can I fix this problem?

thehideouscreatureshow wrote:
How can I fix this problem?
i'm afraid the only solution looks like returning or selling it and getting something else. that console is described as having a [emphasis added] "built-in, bi-directional stereo USB audio interface..."
http://www.behringer.com/EN/Products/X2222USB.aspx

Recording vocals and guitar at the same time, using the Alesis IO dock!

Hi there!
I have an Ipad 2 with the newest OS installed etc. And I rea the other posts in here.
I bought an IO dock from Alesis the other day and was full of exspectations, but I got a bit disappointed -> Garageband! When I bought the Ipad dock I exspected that I would be able to record (or just play and hear the inputsound from two devices) at the same time in my headphones! But I wasn't... Now I'm wondering if this is going to be fixed in an update or not? I think it would be a shame if this issue isnt adressed, due to the huge abilities the Ipad/garageband/Ipad docks withhold.
So anyone know anything? I went to my musicstore and spent about an hour or so with the tech dude there trying dfferent setups, but unfortunatly without luck! Just to clarify that I didt just plugged in my guitar and got mad that it wasnt apple intuative!
Hope someone can help :)

I am wondering if I can record audio and midi at the
same time in Logic 7 Express. I am running my guitar
thrugh a Roland GR 33, and a line out and using the
GR 33 to trigger sounds in the Logic's synth section
but cant seem to record all three tracks at once. If
any one knows how let me know. Oh and I am running
the GR Synth and Guitar into the Prosonus Fire Fox
and have the GR 33 out midi to the Fire Box as well.
So I guss the question is how do I sent up two audo
tracks and one midi track to record in real time.
Thanks Victor
Try arming the audio tracks, select one of the tracks, then while holding down the shift key, select the midi track you want to record, arming the "r" on the midi track. Press "record".....
HL

How can I change the background of a single slide?

I applied a theme to my keynote presentation but now I want to change the back of a single slide. How can I do this??? thanks in advance!!!

Hi
While you are at the slide that you want to change:
Open Inspector
Go to the second tab, named "Slide"
The last option is named "Backround"
You can choose a color, a gradient or an image fill from there
And that's it.
Hope it helps you
Dimitrios Karamitros
http://www.karamitros.gr

Record on Single Slide /1 at-a-time!

Similar Messages

Maybe you are looking for