Record only portion of slideshow

Is there any way to have a voiceover and set timing of a few slides in the middle of a keynote presentation while the rest all un-recorded?

Keynote is unable to record a voiceover of a few slides and show all the slides in a presentation under manual control.
To get round this use Quicktime X, Quicktime 7 Pro, Sound Recorder X, or Audacity to record narration for each slide and place the file on the respective slide.
Use transitions set to Automatically on the slides to play with the narration and keep the other slides transition
set as On Click

Similar Messages

How do I record only a select portion of the screen?

I can't seem to figure out how to record only a select portion of the screen.

QuickTime X screen recording feature doesn't offer anything except the entire display.

Record only part of my desktop

I use Quicktime Pro to record my screen and then create a Quicktime Movie. It always records all of my screen, but I really only want to record a portion of my desktop (say a specific app window). Can I do this?

Not with QuickTime X. Capture is all of the screnn or nothing.
Plenty of third party software that can do the job. I use Snapz Pro X:
http://www.ambrosiasw.com/utilities/snapzprox/

Display current month records only

Hi Experts,
I have the following requirement.
Report should display current month records only.
For example If the report is run on 20090324, It should display records from 20090301 to 20090324.
That means, report may run on any date of that month, It should display from 01 (of that month) to current date.
I have a select statement saying
SELECT * FROM likp
WHERE wadat_ist BETWEEN month_start_date AND sy-datum
    AND vkorg IN s_vkorg
    AND vkbur IN s_vkbur
    AND kunnr IN s_kunnr.
How to calculate date for month_start_date, so that it can display only current month records.
Thanks in advance
Rohan

Hi Kunta, Suhas, Nandi,
Thank you for your quick reply, I really appreciate it.
for this current month records, I need to display a check box saying
Open orders and shipments with the current month.
But where as Selection text is accepting 32 characters only. Is there any possibility to overcome this?
Thanks in advance
Rohan

Need to track deleted records only in all infotypes

Hi all,
I want to track all the deleted records only from all infotypes. PCL4 stores all the changes records. But I want only the deleted records.
Please suggest how to achieve it?

hi,
try this t.code PC00_M99_UDIR for restore the payroll results directory
RupaPrasad.

I'm trying to record only part of my screen using my Quicktime 10.0, but once I press record in the "Screen recording" feature it automatically starts recording and doesn't give me the option to choose what part of the screen to capture. What gives?

I'm trying to record only part of my screen using my Quicktime 10.0, but once I press record in the "Screen recording" feature it automatically starts recording and doesn't give me the option to choose what part of the screen to capture. What gives?

QuickTime version 10 can only record the entire screen.
10.1, 10.2 and 10.3 offer part of the screen recording.

How to insert 20 records only in one table

hi to all,
i want insert 20 records only in a table,but suppose i want to enter 21th record it will not inserted .
suppose delete one record then insert, it will insert.
but always count(*) is not greater than 20.
is there any solution for that,
pls help me

Yes there is a solution for that using a materialied view:
SQL> select * from v$version;
BANNER
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Product
PL/SQL Release 10.2.0.1.0 - Production
CORE 10.2.0.1.0 Production
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
SQL> drop table t purge;
Table dropped.
SQL> drop materialized view t_mv;
Materialized view dropped.
SQL> create table t (
2 x integer,
3 y varchar2(30)
4 );
Table created.
SQL> CREATE MATERIALIZED VIEW LOG on t
2 WITH ROWID (x, y)
3 including new values;
Materialized view log created.
SQL> CREATE MATERIALIZED VIEW t_mv
2 REFRESH FAST ON COMMIT AS
3 SELECT count(*) cnt
4 FROM t;
Materialized view created.
SQL> alter table t_mv ADD CONSTRAINT chk check(cnt<=20);
Table altered.
SQL> insert into t select object_id, object_name from all_objects where rownum <
21;
20 rows created.
SQL> commit;
Commit complete.
SQL> insert into t values(21,'KO');
1 row created.
SQL> commit;
commit
ERROR at line 1:
ORA-12008: error in materialized view refresh path
ORA-02290: check constraint (TEST.CHK) violated
SQL>
SQL> select count(*) from t;
COUNT(*)
20
SQL>Not sure that trigger based solution works due to multi versioning read consistency.

The PDF file and slideshow view corrupted using iPhoto. Macbook air only get corrupted slideshow and Mac Mini both slideshow and PDF file is corrupted.

The PDF file and slideshow view corrupted using iPhoto. Macbook air only get corrupted slideshow and Mac Mini both slideshow and PDF file is corrupted.

Saving as a PDF file for some users have been a problem. If you boot into Safe Mode and run iPhoto you can create undamaged PDF files. We don't know why the problem but this is a workaround.
This problem prevents many from ordering books, calendars and cards since iPhoto creates PDF file of them for uploading and printing. Booting into Safe Mode lets them successfully order those items.

Need to display records only once for that particular group

Hi,
I have a requirement like displaying repeated records only once for that particular group.
For eg, in the emp table, I need to display repeated deptno only once for the particular group of job.
And for the above requirement I have used the below query,
SELECT empno, DECODE (LAG (job, 1) OVER (ORDER BY job), job, NULL, job),
DECODE (LAG (deptno, 1) OVER (ORDER BY deptno), deptno, NULL, deptno)
FROM emp;
Output:
EMPNO     JOB     DEPTNO
7782          10
7934     CLERK
7839     PRESIDENT
7876          20
7788
7902     ANALYST
7566     MANAGER
7844          30
7900
7654     SALESMAN
7698
But in the above output you can find that, say deptno 10 is getting displayed only once, whereas I want that deptno 10 to be checked whether it is getting repeated within the group of JOB and than hide the deptno 10 only if it is repeated within that job group. If not, deptno 10 should be displayed again.
Please help me in this.
Regards,
Shiva

Hi,
Hope the below helps.
SELECT emp_id, job, deptno,
       CASE WHEN LAG(deptno, 1) OVER (partition by job order by deptno) = deptno THEN null else deptno end
FROM empRegards
Ameya

Only portion of iTunes library visible on AppleTV via HomeShare

Using up to date versions of iTunes for Windows (running on Windows 8.1 64 bit), Airport Time Capsule, and current Apple TV. Even though Apple TV can connect to Media Library via Home Sharing, only portion of my library is displayed. I have restarted the Apple TV, Router, Modem, and Computer, nothing seems to force the library to be refreshed with the missing content, though the items that are listed play fine. Also tried logging out of and back into home sharing but no joy. Is there a firewall setting that I am missing, not sure what the problem is since it was working a couple of weeks ago, thank you in advance for reading this.

Hi all, sorry, but I seemed to have figured out my own problem. The missing files somehow got recategorized as home videos and music so they naturally were not showing in the TV Shows and Movies Section. Sorry for any inconvenience, take care all.

When mastering my DV deck records only black, crash record sees program

Hi there:
I've been editing for years but this is my first Final Cut job. I was having a problem outputting an 8-minute sequence, geting an Incompatible Compression Settings error message. I am not sure why, because all the sources were either DV, aiff music/vo and jpegs, but a friend I asked suggested this solution. First I created a new sequence, making sure that everything was set to DV output (which it seemed to be in the previous, but anyway...). Then I nested my output sequence in the new one. I had to render stuff again, but it seemed that it would finally let me make a digital output to the deck.
The Problem:
When I went to assemble, the deck (DSR-11, tape blacked at head) cued and went into record. The output signal was Firewire, the deck's input was DV. Since I was "mastering", it put B&T as well as a black slug in the appropriate spots and for the correct lengths and played the sequence to the end. However I was only seeing this through the FCP output window. When I checked the tape I found the deck had recorded ONLY BLACK, but did assemble correctly since I now had black and timecode on my tape for the full duration.
It was as if black were routed to the deck. This was really weird because I had been using the deck to feed my line monitor throughout the whole edit, so I knew the deck was seeing FCP. I tried this several times, using different tapes (DVCam, MiniDV) but the result was the same.
Finally I just added bars and black to the sequence and played it down manually while I hard recorded on the DSR. The deck saw and recorded the piece without a problem, but because I had to hard record the start timecode for the show isn't 01:00:00:00-how unprofessional!!
Any advice you can give is welcomed. thanks!

The DSR-11 is a mainly a player. It wasn't designed for mastering. There is no RS-422 deck control, and a few internal components and menu settings are missing, so you cannot master to the deck with timeline timecode. The only thing you can do is PRINT TO VIDEO, and the deck will start recording at 1:00:00:00. You cannot EDIT TO TAPE. The only way to do that is if you have RS-422 deck control, or you use firewire as deck control and send video out via another route, like SDI. The DSR-25 and 45 were the mastering decks.
There was a trick to getting timeline timecode to the deck, but that trick is 5 years out of date, and no longer works. Bottom line is that you cannot master to that deck and get the timecode you are aiming for.
Sorry.
Shane

When I send mi presentation to a Quick Movie, the program record only the last frame

Why when I send mi presentation to a Quick Movie, the program record only the last frame, how I do to record the whole presentation of 52 frames

I mean when I try to burn a CD.

Hi Lèonie, it is still recording only 8 minutes (more or less). I take off the 'metronomo', time is 'on', the section timing is on 'automatic'. What do you mean saying 'set the tempo to a very low value' ? Thank you again. Ipad Retina ...

Hi Lèonie, I tried, but it still recording only 8 minutes (more or less).
I took off the 'metronomo', tempo is on (automatic), the section time
is on (automatic).
What do you mean when you say "set the tempo to a very low value" ?
Thank you again.
Best Regards,
Enrico

Enrico,
in your previous post you said:
GarageBand (used with a Mic microphone) is stopping to record after only 7/8 minutes.
In which way I may record a complete concert or at least one hour of music ???
If you want to record at least one hour of music, you need to make the max. of 320 bars last for a long time - for example:
With a maximum of 320 bars, a song with160 bpm and a 4/4 measure will only last for 8 minutes; to make it last 32 minutes, reduce the tempo to 40 bpm.
Léonie

How to make the Tabular Form for Inserting records only?

Hello Experts
I need to create a Tabular form page to use it to insert records only. I do not want to update or delete records. I want the user to fill some fields and then validate it and submit. Also, I need to add a field that shows the sum of a specific field of the added records.
Thanks a lot for all your help.

UPDATE_LTD
For Maintain subset of data (Update selected data)
SHOW_LTD
Display subset (Display Selected Data)
TVIMV-VARIANT
Variant name. Use variant (only with UPDATE_LTD, SHOW_LTD and TRANSP_LTD)
For more information refer the below link
[Maintain parameter transaction code|http://help.sap.com/saphelp_webas630/helpdata/en/a7/5134f9407a11d1893b0000e8323c4f/content.htm]
Hope this helps.
Thanks.,
Balaji

Recording ONLY new episodes of a series is not allowed!

I recently upgraded to quantum. Now when I try to record a new season of a TV series I am not allowed to record just the first run (new episodes).....I am forced to,record the new episodes and ALL or the reruns. I just spent 40 minutes on the phone the the fios people and they say that is all they have. I said so you charge me more & give me fewer option. Furthermore the DVR recording options are redundant..."record episode" is fine, then there's "record series" and you get the new & old episodes and there's "record series with options" and you get the new and the old episodes...THERE ARE NO OPTIONS!!! This is stupid! The other nonsensical part of this is the shows I already had saved to record on my old equipment migrated to the new equipment and those still record just the new episodes.....so why can't I create a new recording and record only new episodes?????

Nedsma wrote:
TNS_2 - I beg you to come to my house so I can show you the option is not there. I have not had the option to record first run only ever since I got the new quantum equipment. Furthermore, the Verizon tech support person and her supervisor TOLD me there was no option to record only the new episodes, hence NONSENSE! Please get Verizon to correct this!!!
I have Quantum, and I most definitely have the option to record only first-run episodes. However, that option is not available when I first schedule a series, I have to go in and modify the series.
I think maybe you are failing to scroll down on your options. I have a number of series recordings scheduled, I can easily go in and change the recording option on any of them:
Scheduled Recordings ==> series I want to modify/OK ==> scroll down to Modify Series/OK ==> scroll up to Episodes/OK ==> select First-Run Only/OK == Save
Unfortunately the reps you talk to on the phone know very little, I have had FiOS now for 10 years, Quantum for one full year, and I have found I generally know far more about how FiOS works than pretty much any of the reps you might talk to.
And last, none of us here can get Verizon to do anything, we are all just other customers trying to help.
Good luck.
Justin
FiOS TV: Extreme HD, Internet: 50/50, Digital Voice
VMS Enhanced Service: 1 server, 2 clients
Keller, TX 76248 (VHO 1)

Record only portion of slideshow

Similar Messages

Maybe you are looking for