Record Programs in Mobile TV on N96

How I can record Programs in Mobile TV on N96? Is there any Software for it?

The Mobile TV application itself can record programs.
Don't ask me how - I no longer have an N96 and there's no DVB-H in my country anyway...
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Similar Messages

HOW DO I SET MY AUDIO RECORDING PROGRAM

I AM USING BEHRINGERS UF0202 TO TRANSFER MY CASSETTES TO ITUNES. IT SAYS TO SET MY AUDIO RECORDING PROGRAM TO RECORD FROM THE USB PORT. HOW DO I DO THIS?

Are you are using an audio interface?
Are you recording external instruments... you will need to explain what kind of audio, virtual instruments, loops, recorded audio through an interface?
If you're recording through an audio interface (or the computer's audio input) Logic's plugins cannot stop peaks as Software is -after- the the hardware input. If you're getting peaks recording through hardware you will need to bring down input levels.

Recording Program for SOST Tcode

Hi Experts,
I have a requirement to write program to send fail mails from SOST Tcode.
For that i am planning to write Recording Program (still not clear if it will work, as the where data in SOST is maintained)
However, send me some snipets which can help to achieve this goal.
Any suggestion will be welcome!

Hi,
Find the solution what i opted. Recording will not work as the failed messages in SOST can't be recorded.
I have find the solution by using FM 'SX_SNDREC_SELECT' and got the Error once.
Using 'perform requeue using lt_resend changing counter'
from standard send the error mails into the Queue.
This solution will be helpful.

Record audio on mobile desktop

i try to record audio on mobile sessions on the sun rays. i hear things correctly when i swich on monitor (shift+props or sdtaudiocontrol), but it seems that no data is transfered from the ray to the server! -> $AUDIODEV outputs just nothing.
is it maybe not possible to record audio, if mobile sessions are used? playing audio works very well...

Please check the response in this post - Edge Animate and iPhone 4?. Let us know if that helps, otherwise you can share the sample with us, we can take a look.
Also, we have released a new patch yesterday which contains many critical fixes. More details here - Edge Animate 2014.1.1 is now live
-Dharmendra

Copy Recorded Programs

Does anyone know if there is a way to copy a DVR recorded program to an external device (USB etc..) ? I can't get a clear answer from Verizon.
This is something that would be nice to do on occasion, like recording to VCR tape. Some times there is something I would like to keep and not take up space on the set top box.
Just wondering.

Keagle79 wrote:
Does anyone know if there is a way to copy a DVR recorded program to an external device (USB etc..) ? I can't get a clear answer from Verizon.
This is something that would be nice to do on occasion, like recording to VCR tape. Some times there is something I would like to keep and not take up space on the set top box.
It's not possible to download or copy recorded files from FiOS without a TivoHD (screenshot). That's a TiVo exclusive feature.
With the FiOS Motorola DVR, the most you can do is copy content recorded from local channels, in realtime as it is played, using Firewire. Verizon not provide any technical support for this (you've got to figure it out yourself), and it only works under 32-bit Windows XP and Vista (as far as I know) once you've installed the right software and drivers on your computer. More information in this thread.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it.

How to build dynamic databases(record set) for mobile?

Hi All ,
i have an applocation that needs to personalize the data for users .
i have the data available , but dont know how to personalize it fot users to download special version of my application.
how to build dynamic databases(record set) for mobile?

In the load rule in the dimension build settings you would need to go to the tab dimension definition, choose the time dimension and right click on it. Select Edit properties. If you have not done so, set the dimension to be the time dimension. Then go to the generations/levels tab and set the generation names you need. For example if you want YTD, you would set the generation name to Year, if you want QTD set it to Quarter. You would set the number to the generation number that coorisponds to the generation. The DBAG has the list of names for all of the DTS members.

How to use upload condition record program RV14BTCI

Hi
how to use upload condition record program RV14BTCI.
kathir.

Hi,
To run this program we have to maintain Upload file in Application Directory,
We have to maintain 3 levels of records in that file.. my feel you upload through BDC or LSMW.
For your information,
The batch input program RV14BTCI reads the parameters is necessary
Giving sequential file and creates (depending on the data
In the file seq) one or more batch input sessions.
The data are seq file in the following structure expected:
- The session a session intent (Table KOBTCI, Record 0)
All other records until the next session, the intent
Last session assigned to read
- The head condition Sentence (Table KOBTCI, record 1)
All other records until the next condition,
Last read head appropriate rate
This includes the corresponding condition
Condition table
- The key sentence of a Main (Table KOBTCI, record 2)
It must be directly on the head set to follow
It contains the key condition of the table
+ Detail fields
- The season record has a subordinate clause (Table KOBTCI, record 3)
The teams relate to the key sentence in the main
Best Regards,
KSK

Overlay mode won't display recorded programs

I have an MSI GeForce4 MX440-VTD AGP8X card and a Leadtek Winfast 2000XP TV Deluxe tuner card. Using overlay mode, I can easily redirect the normal cable output from the Winfast PVR application to my TV, and it looks perfectly fine.
However, when I open a stored video file recorded by the Winfast PVR and try to redirect it to the TV, the video will not display....I only get a black screen or a frozen screen of the last image from the analog cable stream. Overlay mode only plays the incoming analog cable signal and simply refuses to display the playing recorded program.
Audio works perfectly.
Yes, I can play the application in overlay mode with Windows Media Player, but then I lose the ability to use the PVR's remote control to fast forward thru commercials, etc.
I have the latest BIOS on the VGA card and the latest mobo (K7N420D-PRO) bios, and have tried nvidia driver versions 43.45 (currently) and 41.09. I have even tried turning off overlay mode, starting the recorded program in the PVR, and enabling overlay mode while it's running...no different - just a black screen.
This is the primary functionality I needed in order to turn my bedroom pc into a PVR, and yet it does not work.
Any help or suggestions would be appreciated...
Deron

I'll try and do my best to describe what it is I'm doing.
I've started out with a “flat” image of a product on a white background with a shadow on it. I need to make the background transparent and so that all I’m left with is the product with the shadow on a transparent background.I want to be able to place this image over another image in indesign and have the background remain transparent.
On the first layer I have a clipped out version of the product with no background (All by itself with no background or shadow). On the second layer I have the original “flat” image with the shadow and white background. On this layer I’ve used the multiply blending mode to remove the white background.
Now that I have the product on one layer by itself and the product and shadow on layer two with the multiply blending mode I have an image of the product with a shadow with no background. When I place this into indesign, my image shows up with the white background as if the multiply blending mode isn’t applied.
I’ve tried this on other images. It doesn’t appear that it lets you bring an image over with that blending mode. It's like I'd have to bring over a clipped image and then place that on top of my original image with a blending mode placed on it "in" Indesign.
Hope that make sense?

60-minute recorded program stops at the 49-minute mark

On Tuesday, our DVR (QIP2708)- recorded a regularly-scheduled show from 8:00 to 9:00. In the DVR's recorded programs, it showed as 59 minutes, 45 seconds (roughly). Watched the show until about the 49-minute mark, but the recording stopped abruptly and returned to the DVR menu. Hitting "resume playback" results in the last 2-3 seconds playing, then it just returns to the menu.
I tried fast-forwarding and skipping to the end, with no positive result. Once it gets to this 49-minute mark, it just stops, even though the progress bar shows a 59-minute recording. I manually reset the STB with no luck. Even tried watching on a remote STB but the result was the same. There's no error message displayed; the recording just stops.
It seems, just before the issue happens at the 49-minute mark, that the recorded program starts "skipping frames". I'd almost say that the video frames are "out of sync".
We had no power outage on Tuesday, and as far as I know, everything "FiOS" was working fine, as we were watching another program at the time this recording was taking place and we're constantly using a PC someplace in the house. I'm suspecting the recorded file is just corrupt, but I'm wondering if anybody else has seen this problem....?
I can go back and finish watching the show via the broadcast network's online library, but feel I shouldn't have to do that. I'm also wondering if this is indicative of a hard-drive problem in the DVR. (Certainly, if it appears more often, I'll request a replacement.)
Any insight greatly appreciated. Thanks!

Now is this the only program where you've experienced this issue? Can you test a few other programs and see if you get similar results?If the problem is on-going, then yes we can easily ship you out a replacement DVR. It's possible the channel had an outage and went off the air for a short bit aswell so could be a freak occurance.

Question: how to use JAVAEE to run the WAP program of mobile phone on web?

I want to develop a web program by JAVAEE. It uses the simulator of mobile phone to run the WAP program of mobile phone on web. You can operate the program on the page just as do on mobile phone. tell me how to develop on details soon. show the code, please.

Haha, there's no way in hell you can do that. And nobody in their right mind would write the code for you, at least for free.
Jesus with you people these days..."Java_Researcher". I bet you've never written a single line of Java.

Recorded programs have no audio and clock out of s...

Hi
I have had Vision box since May and have recently moved into a new home taking the service with me. At my previous address we had no problems whatsoever with the service.
It's been one month since moving home and It's been a disaster.
I used the online change of address tool which seemed fine but upon moving in and setting up my box, BT had cancelled my subscriptions leaving me with just the freeview channels. I have since made a number of calls and thankfully this problem has been resolved.
Unfortunately a new problem has arisen, all my recorded programs have no sound. The video playback is smooth but we can't hear anything.
The clock has also bizarrely decided to stop working!?
Getting a bit fed up with it all to be honest.
Any help would be great!

Hi Kyebuff,
Thanks for posting and welcome to the community forum!
Sorry for the problems you're having with the sound on the content you recorded on your BT Vision+ box. We'll need your details to help get you sorted from here.
Click on my username and under the "about me" section of my profile you'll see the link to get in touch with us.
All the best,
Robbie
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

The video that is recorder through my mobile camera can't be seen in mobile screen

I need to record through by mobile camera and play it in browser of my website. In my mobile phone the frame that should show the video is created by flash player but it is just white and no video (preview) is seem inside the frame.
The video that is recorded through my mobile camera should be seen in the frame but it is not there.
I used HUAWEI and sumsong mobiles and both use Android.
I later made an Air for Android application and used CameraUI class. It works in desktop and shows the video captured by webcam but still it dose not work on the mobile.
Thank you very much for your prompt answer

same thing is happening with mine, every solutions proposed require a fully charged battery, but there's just no way to charge it, computer is not recognizing it anymore, and pluging it into the wall doesn't work either, so is there left to do? thow the $500 object in the freakin garbage? I hate this thing

Audio recording program with thinkpads?

I have a T61p. I have upgraded to Windows Vista since I purchased it, and have restored most of the ThinkVantage software. But I remember using a nice audio recording program before my upgrade that would just simply record sound and show a nice graph on a black background while doing so.
I thought it might be the Multimedia Centre for Think Offerings package, but that just seems to burn CDs. Does anybody know which software this is?

Ah, I figured this one out. To get it to accept input from a microphone, either internal or external, I had to go into the Garageband settings in the app and turn on Airplay/Bluetooth and then turn it off. On the iPad a high-pitched squeal was emitted from the speaker. This died away after a few seconds and then voila, the VU meter began to move. The same trick worked on the iPod Touch 5g -- without the accompanying squeal. Strange that this would solve the problem.

Sample rate is resetted by recording program

E-MU locked.jpg
Hi,
I try to record some of my old DAT (digital audio tape) recordings to PC (Vista) using the E-MU 0404. Sample rate 48 kHZ, sync source external, locked; I can hear the sound coming from earphones connected tot the E-MU device.
Then when I try to record, the sample rate is reset automatically to 44.1 kHz. No sound is coming from the earphones anymore; the blue 'locked' signal is out and there is no signal shown in the meters of the recording program. This happens with Ableton Live (Free download) as well as Adobe Soundbooth CS4 and Audacity 2.0. What can I do to prevent the E-MU device being reset?
greetings from The Hague, Holland

Resolved.
The trick is in the Windows Sound Settings, Digital Input:
WindowsDigitalInput.jpg
Signal at the microphone input of the E-MU can be recorded.

Can't Watch Recorded Programs from Other TVs

I recently had to replace my Verizon box that controls my main TV. Of course I lost all of my recorded programs. But the big issue is that now I cannot watch programs recorded on my main TV on the other two TVs that I have. Before the replacement I was able to watch recorded programs on any TV. Verizon also replaced my router as I had a very old one that was installed four or five years ago.
Can you help me with the remote TVs with regards to being able to watch recorded programs from the main TV box?
Thank you,
Hugh

The iPhone records video in the H.264 video codec, which should be included as part of your install of Quicktime. What version of Quicktime are you running? You might check and see if there is an update that you might need to install. Do you have problems playing videos on the Apple Movies Trailer website? If yes, then you might be missing the H.264 codec for some reason. If no, then maybe the file is getting corrupted somehow when you copy it from your iPhone to your PC. I've has instances where a file said it finished copying and I tried to play it and couldn't (I got the same message you got from Quicktime), so I copied the file again and the file worked the second time.
http://trailers.apple.com/

Record Programs in Mobile TV on N96

Similar Messages

Maybe you are looking for