Record Question

Hey everyone, you know how you can record a video chat on ichat right? well how do you enable it? i was in a video chat and i was unable to record the video chat that i was in. i know you need permission from the person you are in the video chat with but it still wasnt working, i dont know whats up?
Thanks!!

Hi,
Yes, as Pastahelmet says, the item is there but is conditional on the Buddy having iChat (to Accept the Record request) and a (Video) Chat has to be open.
This Add-on Alternative does not need iChat 4 or the Buddy to give Permission
http://www.ecamm.com/mac/conferencerecorder/
10:10 PM Monday; April 27, 2009

Similar Messages

  • Multi-track recording question

    Multi-track recording question
    Hey, just need some help on multi tracking using audition, hope this is the right forum?
    Wanted to know if anyone has a clue about assigning inputs from an audio interface to separate tracks on a recording program (ie: Adobe audition)
    I record live with my band alot, and have every amp and the kit mic'd up, but how do i make it so that each microphone is recording to a different track on the PC?
    My interface is an M audio fast track ultra, if that is of any use.
    Any advice appreciated! Thanks!

    FreeCT wrote:
    Wanted to know if anyone has a clue about assigning inputs from an audio interface to separate tracks on a recording program (ie: Adobe audition). I record live with my band alot, and have every amp and the kit mic'd up, but how do i make it so that each microphone is recording to a different track on the PC?
    In Audition, assuming that you can see all of the inputs available in the Hardware Setup, you find the right-facing arrow (input assign) on each track in MV's Main view, and you click on the box it's pointing to, go to Mono, and select the input you want for that particular track. The mono ones say [01M], [02M], etc. If you want to record a stereo track, then select the Stereo option where the inputs are paired and say [01S] et seq. This would have input 1 as left, input 2 as right.
    If you can't see all of the inputs available, try selecting the ASIO driver in Hardware Setup...

  • Nokia Lumia 1020 Recording Questions

    I'm planning on recording a show that I am involved in with a Nokia Lumia 1020 (which I haven't actually got yet), but was wondering whether it's possible to use the 1020 as just a camcorder and live capture/save the video file to a laptop?
    I've heard ways of doing it with a camcorder and live capturing it straight into Sony Vegas.
    But getting a new phone sounds much better than getting a new camcorder or camera.
    Also, one other reason for me thinking of using the 1020 is because the previous cameras we've used to record shows haven't been great at recording in a theatre and seem to get a bit drowned in light, since the theatre itself is dark (especially at the back where the camera will be) and the stage is flooded with bright stage lights, it often makes the dances and dancers look bad.
    Do you think the Lumia 1020 would be alright with this situation?
    So, two questions there!
    Thanks,
    Joe!

    I would be sure that you have nothing on your device memory to ensure that you have enough memory. it is going to record in 1080p unless you choose otherwise. so the file is going to be big.
    I do not believe there is a way to record using your 1020 and have it live save to a memory outside of the device memory. at least, I have not heard of or seen anything to say this is possible.
    coloring, imo, should be pretty good. so long as there isn't any lights aimed directly at the camera. I have been very happy with its videos that it creates.

  • DNS Records Questions - TXT Files

    Hello everyone,   I would like to preface this post with, this is my first time dealing with DNS records.  However, the instructions seem a little confusing, so i would like your professional feedback.  
    Currently using Godaddy for hosting.  Ill start with the instructions, then my set up, my result and my questions. 
    Instructions:
    You will be adding two separate TXT entries to your DNS record - note - be sure that you do not add any carriage returns when copying the key, below:
    First Entry (This is called the DKIM policy record):
    Name:  _domainkeyTXT:   "t=y; o=~;"If your domain is 'foo.com', then the 'name' entry will look like this when it is displayed as: "_domainkey.foo.com" 
    Second Entry: (This is called the 'selector record' and includes a public crypto key):
    Name: key1._domainkeyTXT: "k=rsa\; p=MFwwDQYJKoZIhvcNAQEBBQADSwAwSAJBAKQrQeUnNX/CQBIXWqeHc8lKl+EwhGKzPuDRbDjnN2Xzl8N4Fc2oQ6R+opnEM6U4x4p
    3NggEyNg8Mp2W6oUYpAECAwEAAQ=="
    If your domain is 'foo.com', then the 'name' entry for this will look like this when it is displayed: "key1._domainkey.foo.com"
    That's it!
    You can send a test message to a yahoo email address, then select Actions->View Full Headers in Yahoo
    when you view the email.  If you have configured DKIM correctly, the header information for the email will include a line similar to:
    Authentication-Results: mta1084.mail.mud.yahoo.com  from=mypinpointe.com; domainkeys=pass (ok)
    Fisrt Entrey
    Hostname: @
    TXT Value: _domainkey.mydomain.com:   t=y; o=~;
    TTL: 1/2 hour
    Second Entry:
    Hostname: @
    TXT Value: key1._domainkey.mydomain.com: k=rsa; p=MFwwDQYJKoZIhvcNAQEBBQADSwAwSAJBAKQrQeUnNX/CQBIXWqeHc8lKl+EwhGKzPuDRbDjnN2Xzl8N4Fc2oQ6R+opnEM6U4x4p3NggEyNg8Mp2W6oUYpAECAwEAAQ==
    TTL: 1/2 hour
    Results
    1. a really long string of code, but when you search for it here is the result  Doesnt say domainkeys=pass (ok): 
          Authentication-Results: mta1466.mail.gq1.yahoo.com  from=giglinxusa.com; domainkeys=neutral (no sig);  from=crapemyrtle.mypinpointe.com; dkim=pass (ok)
    Questions
    1. Should the TXT value include "", like they have it in the instructions?
    2. In the first entry, should there be so many spaces after the .com:    t=y
    3. What are carriage returns? (assuming spaces)

    Hello,
    but I don't understand anything else then you will use Godaddy.
    What is the aim of this? Connecting an email domain to your internal network or about web services? Please be more specific in your description what you are trying to achieve.
    Best regards
    Meinolf Weber
    MVP, MCP, MCTS
    Microsoft MVP - Directory Services
    My Blog: http://msmvps.com/blogs/mweber/
    Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.

  • Just a Few Recording Questions

    Hey everyone,
    I have a few questions about how garageband works...
    Do you have the ability to record multiple tracks at the same time using firewire and keep them as separate tracks?
    Can you then play back those tracks all at once and simultaneously record another track?
    As stated, I would be using firewire to record and the headphones jack for monitoring.
    Thank you very much!

    Tom Bacho wrote:
    Do you have the ability to record multiple tracks at the same time using firewire and keep them as separate tracks?
    http://www.bulletsandbones.com/GB/GBFAQ.html#recordmultipletracks
    (Let the page FULLY load. The link to your answer is at the top of your screen)
    Can you then play back those tracks all at once and simultaneously record another track?
    yes

  • Please help - what do I need? Recording questions

    We do not have digital cable but do NOT need a converter box because we have comcast basic cable.  (I did buy one anyway with the coupon).  We will switch to digital eventually but right now the budget doesn't allow the extra monthly charges.   I am purchasing a new TV for one of the rooms but want to still be able to record programs while watching another channel, which I can currently do with my VCR/DVD combo.  I also need to buy a new recorder (combo perhaps?) because this one is on the way out but still want to be able to do what I'm currently doing.  (I still tape programs in another room on an old VCR and can watch them in the other room).  However, my question is what equipment do I buy? With what I've been reading, I'm guessing a dual tuner DVD/DVR/VCR combo?  Is that correct?  I'm totally confused at this point.  However, I also want to be able to still use this equipment (recording one channel while watching another) when we switch to digital cable.  I don't want to spend the money on equipment that won't be usable when we upgrade to digital.  Any advice?? Your help would be appreciated.
    Thank you.

    I would suggest a Tivo to meet your needs.  There is a montly service fee involved to the Tivo service, cost depending on what type of plan you get but no more then about $15 a month.  With Tivo you can set it to record your fravorite shows once, choose if you want it to record all showings or just new eps.  Then you never have to worry about missing your favorite shows.  It has a dual tuner that can record 2 shows at once and you can watch a previously recorded show at the same time. 
     I had comcast DVR for a long time but had to pay for the digital service on top of that even though I never watched channels over 75.  So i made the switch to Tivo and love it.  If you already have Netflix then you get a major bonus.  You can watch instant queue movies on your TV.  And if you have broadband internet access some movies are sent in HD format as long as you have the TivoHD DVR model.

  • Newbie home recording questions

    Heyas,
    I just got audition 3, ive used cool edit pro alot - the old versions 2.0 etc.. I always just used this to laydown something in my head to work out parts or show bandmates. So the quality really hasnt mattered that much before Audition 3 has tons of new stuff in it.
    Im trying to make the recordings sound good though now, I have two questions:
    1. What is the best export format when you do a "save as" out of your mastering track? I saved as a constant highest quality drop down, and it still sounds really cheap. The volume seems low and its not a very dynamic, full sounding recording. Anyone have a basic guide for mastering out of audition3 ?
    2.I am recording all my tracks to the peak before clipping and I know the inputs are clean and loud. Basically looking for a guide, tutorial, or tips on how to mixdown and master a typical 4 piece bands, guit, vocal, drums, bass etc.with adobe audition. Guides or links for panning tricks, or something to bring out that "full sound" . Dont get me wrong, the tracks are very clean, and mixed well, just low volumes, and not that awesome "big, full" sounds that I have heard other people make on the same basic setup..
    thanks everyone!
    Alex
    Gear currently using:
    Line 6 lineport UX2 for inputs - Adobe audition 3 - Shure SM58s for vocals - Reason 4 for sound effects, drums loops.  Alesis SR 16 for basic drums as well

    Best thing to do is do a search on this forum for mastering or across on AdobeMasters forum eg http://www.audiomastersforum.net/amforum/index.php/topic,4933.0.html as an example only

  • Basic voice recording question

    Sorry for the basic question. I'm using a Plantronics headphone and an early Powerbook G4 laptop running 10.3.9. I just want to do some voice recording on Garageband 3.
    My system preference for sound is audio line-in port (I don't see a microphone jack on this G4 laptop).
    My system preference for Garageband only gives me the built-in audio option for audio input.
    I don't seem to be able to figure out how to record my voice. Can anybody help with the settings or procedures. Thanks much!

    Hi charles,
    Not familiar with that version of the iBook, but if there is a headphone jack, the line-in would be the same size plug as that (i think it wil have to arrows pointing towards a dot).
    Recording voice has alot of options. If we knew what you were trying to record (singing, podcast, voice over) we could be more specific. Budget is a huge factor as well.
    Just a couple of quick suggestions,
    Podcasting, can't go wrong with a USB mic (Sampson and Blue both make good ones) and you don't have to buy anything else to work with them.
    Vocals (singing), you should get a digital interface, a good pre amp and a good mic. In this catagory, the more money you spend (usually) the better quality you will have.
    lets start here and you can get back to us....
    good luck Charles and welcome to the forum!
    xs4is

  • Mac Speech Dictate and other Audio Recording Questions

    Thanks again for this great resource. I have a Macbook Pro, my first issue is I want to record audio from my stereo system, through the headphone output. I can't use the cables because I have an AV splitter, I have a DVD, Satellite, TV, all going through the splitter and to the stereo system, so I need to record stuff to my Macbook Pro from the stereo headphone output.
    How is this accomplished?
    My second question, is it possible to use Mac Speech Dictate to pull segments of audio from a radio talk show into typed text? I sometimes write transcripts of talk radio segments for a blog and it takes such a long time to pause, type, pause, etc. I am looking for the best solution to just play the audio and have the program type it out.
    Once I have the best program, how would I get the audio in, would the internal mic pick it up if I played the audio through my stereo system at a loud volume?
    Thanks for your time and any assitance you can give me.

    Hi there,
    I'm having issues understanding what you want to do with the cables from your stereo. Do you want to record the talk show from the stereo into your MBP? If so, then you can use a simple Y-adaptor (Stereo RCA -> 1/8" minijack) to connect your stereo's audio output to the MBP's line-in jack. Or, are you trying to go the opposite direction? MBP to stereo? Sorry for my confusion.
    Edit: I'm sorry, I completely misread your first post. If you want to go from the stereo's headphone jack to the line-in on the MBP, you only need a 1/8" to 1/8" male-male cable. Is that what you were looking to do?
    --Travis
    Message was edited by: Travis A. (Thanks)

  • DDNS ownership of record question

    We have two Window 2012 r2 DHCP servers (no other function)
    IPv4 is set to "Dynamically update DNS A and PTR records only if requested by the DHCP clients"
    Scopes are configured to "Always dynamically update DNS A and PTR records"
    "Discard A and PTR records when lease is deleted are set on both"
    The servers don't use DHCP credentials and no servers are in DNSUpdateProxy group
    With all this I would expect DHCP clients to have A and PTR records to be owned by a DHCP server but the records are owned by the computer accounts.
    These particular clients are unique in that they are DHCP reservations whose IP addresses are in the same subnet as the scope but are not part of the scope Address Pool. This was doable in w2k3 dhcp, wasn't doable in W2k8 r2
    dhcp and is again doable in w2k12 r2 dhcp
    My question is - based on this configuration - do the scope option 81 settings apply to these clients with reservations - in which case I don't understand why the computer accounts own the A and PTR records
    Or, do the IPv4 option 81 settings apply to the clients since the addresses are not part of the scope address pool - in which case I understand why the computer accounts own the A and PTR records
    Thanks

    Hi,
    Before going further, thanks for coming back and letting me know that my first reply didn’t help
    resolve our problem.
    The reason why I provided the above suggestion is:
    The priority for DHCP settings is
    reservation >
    scope policy >
    server policy >
    scope-level >
    server-level.
    If the setting of reservation is different from the setting of scope, the setting of scope will not take effect.
    Therefore, if we select the
    Dynamically update DNS records only if requested by the DNS clients
    in the Properties dialog box of the reservation, DHCP server will not register the DNS recorder until clients request.
    For fully patched, I mean to get the system updated to the latest. However, for this is a production environment, it’s really up to you to make the call.
    Now, in order to further troubleshoot the issue, we can enable the DNS debug log, and if necessary, you may upload the log to Onedrive and provide us the download link.
    Best Regards.
    Steven Lee
    TechNet Community Support

  • Broadcast Recording Question

    OK, sorry if this is off topic, but technically I am using FCP to put this current project together. (that counts right??)
    Anyway, my question stems from a client about the possibility of getting a broadcast of a town-hall meeting on their local television station recorded, then digitized and edited for the web in FCP. I would assume you could do this with a capture card, which I personally would do, but the client is far away and wants to record the broadcast themselves - needless to say, they aren't very tech savvy. They are wondering if it would be prudent to purchase a DVR, record to that and then find a way to send me the files for editing in FCP. Or perhaps just record to a VHS and then send me the tape. I told them that I don't think that is possible/legal to go this route.
    Can anyone give some advice here? If a client asked you if they could record a government town hall meeting on their local cable channel so that it could be edited into a non-profit production to be put on their website, what would you say? I have very little experience with this um.....workflow. Once again, sorry if this is too far off topic, but I am getting desperate for at least some starting guidance. Thanks.

    Before using this material in any way that might be deemed commercial use, your client should seek permission to use it from the copyright holder and the broadcaster.
    Whatever you do, don't record it off air and just put it on the web without asking.
    Who knows, the broadcaster might even give you a good quality tape to work from.

  • Loading all records question

    Hi,
    I managed to save to a file but when I try to retrieve all records it only lists one of them . What am I doing wrong?
    The whole code is at:
    http://www.multiline.com.au/~wje/java/question.html
    Thanks for your help.
    Andonny
    to load:
      public void load(String filename)
             try {
                    Map map = new HashMap();
                      Reference1 item;
                      items = new Vector();
                   DataInputStream inStream = new DataInputStream(new FileInputStream(filename));
                    String code = inStream.readUTF();
                    double pr = inStream.readDouble();
                    System.out.println(pr);
                    int qty = inStream.readInt();
                    String auth = inStream.readUTF();
                    String pub = inStream.readUTF();
                    int yr = inStream.readInt();
                    String cat = inStream.readUTF();
                    String ref = inStream.readUTF();
                   item = (Reference1)map.get(code);
                 if (item == null)
                             item = new Reference1(code,pr,qty,auth,pub,yr,cat,ref);
                             items.addElement(item);               
                   map.put(code, item);
        catch (Exception e) {
          e.printStackTrace();
          System.exit(1);
      }to save:
       public void save(String filename) {
        try {
          DataOutputStream outStream = new DataOutputStream(new FileOutputStream(filename));
           Iterator iterItems = items.iterator();
          while (iterItems.hasNext()) {
              Reference1 s = (Reference1) iterItems.next();    
               outStream.writeUTF(s.getProductCode());
               outStream.writeDouble(s.getPrice());
               outStream.writeInt(s.getQuantity());
               outStream.writeUTF(s.getAuthor());
               outStream.writeUTF(s.getPublisher());
               outStream.writeInt(s.getYear());
               outStream.writeUTF(s.getCategory());
               outStream.writeUTF(s.getReference()); 
          } // end while
          outStream.close();
        catch (Exception e) {
          e.printStackTrace();
      }

    Hi,
    Thank you for your advice.
    I did insert a for loop and it loads all the items. In this case I know that I have 4 items in the file so it is okay to loop to 4. How can I loop to the last record not knowing how many are there. What do I need to put as the 4 to make it universal.
    public void load(String filename)
             try {
                    Map map = new HashMap();
                      Reference1 item;
                   DataInputStream inStream = new DataInputStream(new FileInputStream(filename));
                   for(int i = 0; i < 4; i++){
                         String code = inStream.readUTF();
                         double pr = inStream.readDouble();
                         int qty = inStream.readInt();
                         String auth = inStream.readUTF();
                         String pub = inStream.readUTF();
                         int yr = inStream.readInt();
                         String cat = inStream.readUTF();
                         String ref = inStream.readUTF();
                        item = (Reference1)map.get(code);
                      if (item == null) {
                             item = new Reference1(code,pr,qty,auth,pub,yr,cat,ref);
                             items.addElement(item);               
                   map.put(code, item);
        catch (Exception e) {
          e.printStackTrace();
          System.exit(1);
      }

  • Multiple camera recording question

    Ok so if i have multiple cameras and one of them triggers and is recording can another record at the same time.  it looks like when this happens i lose a video.  the triggers are all in the activioty log but no video is there to see.
    Al

    From my experience the cameras record independently. The motion sensor mode however is not enough for consistent recordings with the wireless cameras. I had to create a second timed mode for each wireless camera and set it to run all day. The issue I have now is consistently viewing the recordings. I keep getting an "unable to play" message! always something!

  • Import Manager  Match Records question

    Hi
    I am following the below file
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a0a9cee4-9cd1-2a10-62b6-ea2acb06a5a3
    Till 5.2 I have done it successfully
    while proceeding through the match records
    i.e.
    In Import Manager, Match Records------> Default Import Action
    is not active to create Records
    35 of 35 ->None->None--->SKIP (its inactive)
    pls check this screen shot
    http://www.flickr.com/photos/11212307@N08/2555733854/
    why it is inactive , where should I have to check
    Any Help pls
    Thanks
    manian

    Hi,
    i have got your Problem, you could come to know if you try this
    Create an Excel file as below
    Category Type Attribute Value
    PC  Text  A  10
    PC  Text  B  11
    Now during import this Taxonomy:
    First Map your Source Category Field with your Target Name Field when Select Categories as Destination Table
    So in MDM Data Manager: when select Categories as destination Table you will GET PC as Value there.
    Noe 2nd step Select Categories( Attributes) as your Destination Table here Map Source Attribute and Type Fields with corresponding Target Destination fields.
    If you skip this 2nd step and just go for Saelcting Categories(Text Values) as your Destination table , the problem you describe is come into picture.coz that attributes are not available into MDM data Manager.thats why even for Update All Update Options it is showing 0 Record.
    Hope it will clear your doubt,
    Rewards if useful.....
    Mandeep Saini
    Edited by: Mandeep Saini on Jun 6, 2008 9:51 AM

  • Camcorder direct to DVD recorder questions

    I've got a client that does focus groups and sometimes they ask me to videotape them. The clients usually want a VHS copy right on the spot. So there is no editing. Well, now some clients are beginning to want a DVD-video instead of VHS.
    I do not have any experience using a set-top DVD-Recorder and I was wondering if anyone can chime in on their reliability for making DVDs from an external source such as a camcorder. These disks do NOT need any menuing or anything fancy. And honestly, they don't need to be pristine in their image quality either. But since the sessions often last over 2 hours, they need to allow for more than two hours of footage. And they cannot have any major hiccups. The recording needs to be pretty reliable.
    So can anyone recommend any (US) models that are reliable for this sort of application? I noticed that some have disk drives and I thought that the reliability might be better to record onto disk then make a "fast copy" to DVD. Any thoughts on this method vs just strait to DVD? Still others have a firewire input. Might I obtain better quality coming from a DV camcorder using firewire to the DVD recorder? Or, is this only used when the source is actually recorded onto DV tape, which I cannot use do to session lengths?

    Everything you need to know is discussed here
    http://www.avsforum.com/avs-vb/forumdisplay.php?f=106

  • MATCH RECORDS question

    Hi
    I am following
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/90e42521-0645-2b10-d1b2-e9f6fab39856
    As in page 14
    " After mapping, under the u201CMATCH RECORDSu201D tab, we select the Material ID as matching field and import the records."
    i am not getting MATERIAL ID [DF] [key] [All]in the Matching field
    pls check my snapshot
    http://www.flickr.com/photos/28108043@N08/2752825285/
    thanks
    manian

    Hi
    I have done the mapping
    http://www.flickr.com/photos/28108043@N08/2752856985/
    manian

Maybe you are looking for