Record Real Time output from a Audio Instrument to Audio Track

Hey,
Is there anyway to record in real-time the output of an Audio Instr?
I use a plugin that doesn't support automation, so I need to record the changes as they appear?
Any other solution?
D

Sound Flower Sound FlowerSound Flower Sound FlowerSound Flower Sound FlowerSound Flower Sound FlowerSound Flower Sound FlowerSound Flower Sound FlowerSound Flower Sound FlowerSound Flower Sound FlowerSound Flower Sound FlowerSound Flower Sound FlowerSound Flower Sound FlowerSound Flower Sound FlowerSound Flower Sound FlowerSound Flower Sound FlowerSound Flower Sound FlowerSound Flower Sound FlowerSound Flower Sound FlowerSound Flower Sound FlowerSound Flower Sound FlowerSound Flower Sound FlowerSound Flower Sound FlowerSound Flower

Similar Messages

  • Problems with real-time extraction from generic datasource.

    Hello,
    I have a real-time extraction from generic datasoruce with numeric field as a delta pointer. I have created an initilization infopackage, delta IP and real-time IP, real-time data transfer process, real-time deamon. The problem is that real-time extraction does not see delta updates. Deamon creates requests in PSA every minute, but there are all empty. When i delete the deamon and shedule not real-time delta infopackage, it loads delta records correctly. Version of BI - 7.0 SP 18.
    The second question: a cannot stop real-time deamon. I stop it in RSRDA, but when i try to shedule standart IP, i get an error, that deamon is still running. So i have to delete it and recreate.
    And the 3rd question, theoretical. What real-time extraction is necessary for? As i understand, i can create a process chain that will be sheduled every 1 (5, 10, ...) minute. What are advantages of real-time extraction rather such variant?
    Thanks.

    Hi,
    1.Note 1113610 - P17:SDL:PC:RDA:Daemon runs: Do not start delta/init IPackage
    Summary
    Symptom
    When a daemon runs or is scheduled, you may not start a 'normal' delta/init InfoPackage.
    Other terms
    RDA, real-time data acquisition, daemon, InfoPackage, scheduler
    Reason and Prerequisites
    This problem is caused by a program error.
    Solution
    SAP NetWeaver 7.0 BI
               Import Support Package 17 for SAP NetWeaver 7.0 BI (BI Patch 17 or SAPKW70017) into your BI system. The Support Package is available when Note 1106569 "SAPBINews BI7.0 Support Package 17", which describes this Support Package in more detail, is released for customers.
    **********you can apply the correction instructions provided in the note
    2.i refered closing of the request in the target i.e DSO not psa.
    3. Note 1000157 - RDA daemon does not get data from delta queue
    Summary
    Symptom
    You use Real-time Data Acquisition (RDA) to load data from an SAP source system. After several hours or days, the system no longer reads the data from the delta queue. In the RDA monitor, you can see that the InfoPackage has been executed, however the data transfer process (DTP) has not been executed for a long time. In transaction RSA7 in the source system, you can see that there is already data in the delta queue.
    Cheers,
    swapna.G

  • Record 1 :Time conversion from 0CALDAY to 0FISCPER (fiscal year A1 ) failed

    Get red error when loading Delta data and the red error is:
    Record 1 :Time conversion from 0CALDAY to 0FISCPER (fiscal year A1 ) failed with value 20060426
    We went to RSA1 -> Source Systems page, right click on the source system, choose Transfer Global Settings, check "Fiscal year variants" and check "Rebuild tables" and then run it twice, but still not helpful that we always get the above red error!
    Any idea?
    Thanks

    hi Anurag,
    You are right that run OB29 on BW, find there is no any period entry for variant A1.  Since all the variant should come from R3 by run "Global Transfer Settings" on the source system, I run OB29 on R3 and find the same thing that there is no any period entry for fiscal year variant A1.  I will go ahead to ask R3 people to correct it on R3, then conduct the "Global Transfer Settings".
    Thanks

  • Triggering Real time job from Batch jobs..

    Can we trigger real time jobs from the batch jobs. As soon as batch job completes we need to start real time job automatically. Is this possible with BODI XI?

    Greetings Post Originator,
    This post is older than 60 days and there are no entries in the past 30 days.  Based on the content discussed, it appears that you question has been answered. This message is being marked as answered and points are being assigned if available where possible. 
    Thank you for being an active participant in the SAP Forums,
    Rob Siegele
    Forum Moderator
    SAP Americas

  • [SOLVED] How to Create OGG Theora Video From an Audio Track + 1 image

    Does anyone know how to create an OGG Theora video (.ogv) from an audio track and one still image. I just want one video frame to repeat until the audio file is finished playing. Make sense? Any help would be appreciated, and if possible I'd love to do it with ffmpeg2theora. Thanks!
    Last edited by tony5429 (2009-11-30 03:14:54)

    http://lists.mplayerhq.hu/pipermail/ffm … 19761.html
    I've tested it w/ 'ffmpeg -loop_input -f image2 -i image.jpg -i sound.mp3 blah.avi' and the output works w/ mplayer but I had issues w/ .ogg and .ogv output.
    In case vlc and gstreamer won't do, check out http://v2v.cc/~j/ffmpeg2theora/
    Last edited by karol (2009-11-29 16:43:23)

  • How can I generate a real-time highchart from my database data?

    I have looked several links; however, I couldn't find a working demo showing how to implement a highchart using data from a database.
    Objective: I want to generate a real time highchart line graph getting data from my database. What I want is very similar to the
    HighChart Demo which provides a real-time highchart with randomly generated values. It is also similar by X-axis and Y-axis, for I want my x-axis to be "Time" (I have a DateTime column in my database) and y-axis to be an integer (I have
    a variable for that as well in my database).
    Please I need help in sending the model data to my razor view.
    Note that I am already using SignalR to display a realtime table. I also want to know if it can be used to automatically update the highchart as well.
    Below is the code snippet of my script in the view. I have used the code provided in
    HighChart Demo link for generating the highchart. Please tell me where should I apply the changes on my code.
    @section Scripts{
    <script src="~/Scripts/jquery.signalR-2.2.0.js"></script>
    <!--Reference the autogenerated SignalR hub script. -->
    <script src="~/SignalR/Hubs"></script>
    <script type="text/javascript">
    $(document).ready(function () {
    // Declare a proxy to reference the hub.
    var notifications = $.connection.dataHub;
    //debugger;
    // Create a function that the hub can call to broadcast messages.
    notifications.client.updateMessages = function () {
    getAllMessages()
    // Start the connection.
    $.connection.hub.start().done(function () {
    alert("connection started")
    getAllMessages();
    }).fail(function (e) {
    alert(e);
    //Highchart
    Highcharts.setOptions({
    global: {
    useUTC: false
    //Fill chart
    $('#container').highcharts({
    chart: {
    type: 'spline',
    animation: Highcharts.svg, // don't animate in old IE
    marginRight: 10,
    events: {
    load: function () {
    // set up the updating of the chart each second
    var series = this.series[0];
    setInterval(function () {
    var x = (new Date()).getTime(), // current time
    y = Math.random();
    series.addPoint([x, y], true, true);
    }, 1000);//300000
    title: {
    text: 'Live random data'
    xAxis: {
    type: 'datetime',
    tickPixelInterval: 150
    yAxis: {
    title: {
    text: 'Value'
    plotLines: [{
    value: 0,
    width: 1,
    color: '#808080'
    tooltip: {
    formatter: function () {
    return '<b>' + this.series.name + '</b><br/>' +
    Highcharts.dateFormat('%Y-%m-%d %H:%M:%S', this.x) + '<br/>' +
    Highcharts.numberFormat(this.y, 2);
    legend: {
    enabled: false
    exporting: {
    enabled: false
    series: [{
    name: 'Random data',
    data: (function () {
    // generate an array of random data
    var data = [],
    time = (new Date()).getTime(),
    i;
    for (i = -19; i <= 0; i += 1) {
    data.push({
    x: time + i * 1000,
    y: Math.random()
    return data;
    function getAllMessages() {
    var tbl = $('#messagesTable');
    var data = @Html.Raw(JsonConvert.SerializeObject(this.Model))
    $.ajax({
    url: '/nurse/GetMessages',
    data: {
    id: data.id,
    contentType: 'application/html ; charset:utf-8',
    type: 'GET',
    dataType: 'html'
    }).success(function (result) {
    tbl.empty().append(result);
    $("#g_table").dataTable();
    }).error(function (e) {
    alert(e);
    </script>

    Hi Sihem,
    Thank you for contacting National Instruments.  Using the LabVIEW Real-Time module, you can do development without actually having a target.  While viewing the project explorer window, you can do the following steps:
    Right click on the project
    Select New >> Targets and Devices
    Select the "New Target or Device" radio button
    Select the target you would like to develop on.Information about the LabVIEW Real-Time Module can be found here.
    Regards,
    Kevin H
    National Instruments
    WSN/Wireless DAQ Product Support Engineer

  • PC time output from NI-FBUS Monitor

    Whenevr I set NI-FBUS Monitor to record data from a device I can select various methods for displaying time, including PC Time as an option, but whenever I select this option and save a file I find that when I re-open the same file later all PC Times for every file starts on 12/32/69 at 18.00 regardless of when the file was saved. Is there a way to get the software to save real time as well as display it while recording data? Note that absolute time saves perfectly, and PC Time displays correctly while recording the data, it is only on playback everything is lost, so that I have to write down the exact time of the first record if I want to know the exact time according to my PC.

    Hello friend.
                You were right on an absolute time. You are recording an absolute time start at 0. First of all I don’t know what type of target you are running on. You might run on RT, PXI, or PC. If you are running of RT, it might explain it why you start at 0 every time. You might try to save the start time using time function, because you mentioned you can display time correctly.
    Hope this is help.
    Good luck.

  • How to get the real-time data from a CCD camera in labview?

    I am going to setup a monitor system and need to acquire the intensity of each pixel at each second from a CCD camera. Also, I need to to some simple calculations with these real-time data at every moment to get my finanl output in this monitor system.
    How may I do this using Labview?
    Thank you very much.
    Kai

    We don't have special powers, so we can't guess if you have Imaq Vision or not, if your camera comes with a LabVIEW driver, if it has an USB interface, or firewire, or a dedicated NI card, if you just want to detect a move, or a change in intensity, etc...
    So, try to be more specific with your question, that will helps a lot  
    Chilly Charly    (aka CC)
             E-List Master - Kudos glutton - Press the yellow button on the left...        

  • 10 band real time equalizer from mic to earphones

    Hi. I would like to do script to do 10 band equalizer which would change sound from microphone dynamicly (in real time) and result play in earphones (also realtime) with small time lag.
    Is that possible? Maybe some paid library? I would like to get 15 band EQ.
    I found something like this:
    http://www.blixtsystems.com/2008/05/simple-3-band-eq-with-flash-player-10/
    but i don`t know how to scale it to get 10 or 15 bands.
    Would it work on mobile air apps or only on desktop & flash apps?

    I found something like this:
    http://philippseifried.com/blog/2011/10/20/dynamic-audio-in-as3-part-3-robot-voice/
    I would like to change it get EQ band corrector to set some bands (f.e. 10 different frequences in hearing range from 125Hz to 8000Hz) volume level up anddown. 
    Something like this:
    band125hz.volume +=1;
    band200hz.volume +=5;
    band400hz.volume +=0;
    band800hz.volume +=1;
    I would like volume up and down by frequencies. This script after change should strengthen (boost) or weaken (cut) the energy of specific frequency bands as in this process:
    http://en.wikipedia.org/wiki/Equalization

  • How to get real time date from Sunny Boy Inverters through SMA Webbox?

    Hello,
    I was looking on how to communicate with three Sunny Boy Inverters that are linked to a SMA webbox. Currently we get a daily summary of the solar production, but we would like to have real time data uploaded into LabVIEW. The people of SMA said that I needed to use "RS485 protocols" with a software they have called YASDI (http://www.sma.de/en/products/software/yasdi.html); however, I keep finding other information that says that I can communicate with my inverters using the SMA OPC server (http://www.sma-america.com/en_US/products/software/sma-opc-server.html). I also found this forum, http://forums.ni.com/t5/LabVIEW/Sunny-Island/m-p/809129/highlight/true#M368718, where I understood that I don't need to use the OPC server, but instead I can use UDP communication to get the data. I found another forum that talks about using the YASDI :http://forums.ni.com/t5/LabVIEW/help-with-Sunny-Boy-inverter/m-p/293273/highlight/true#M153892. 
    I've tried to communicate with the people of the forums and I haven't gotten any responses; therefore, I wanted to see if I can get cleared up on this issue. Do I need to use OPC server to communicate with my inverters through the webbox or can I just use UDP in LabVIEW?
    Any help would be greatly appreciated,
    Thanks
    Jose

    Hello,
    I got a response from Vincezo: http://forums.ni.com/t5/LabVIEW/Sunny-Island/m-p/1794786. I'm currently working with the VI to communicate with the webbox through UDP. Since the PRC protocols to communicate with the webbox are in JavaScript Object Notation (JSON), I'm not sure if the data-in string has to be in JSON format. However, the only error I'm getting is 56 in the UDP read function. I've tried increasing the size of the bytes and timeout, but I keep getting this error. If anyone can help me with this part I would very grateful. 
    Thanks,
    Jose

  • CRM 2007 - Real Time Quotations from ECC 6.0

    Hi Gurus
    We want to be able to generate Quotations in our CRM 2007 system.
    The Master Data is maintained in ECC 6.0 for the products we wish to Quote on.
    I think the terminology we're looking for is a real time quotation capability where by we pulled the required values from ECC 6.0 at the time of the quotation.
    Is this possible?
    What are the general steps required to do this?
    We want to avoid delta loads of data from ECC 6.0 into CRM if this is at all possible.
    Is this the right approach or should we consider Delta Loads?
    Many Thanks in advance
    Panduranga

    Hello Panduranga,
    Not as far as I know, but the following is a good starting point:
    IMG: Customer Relationship Management => Transactions => Settings for Sales Transactions => Define Profile for ERP Sales Transactions
    Kind regards,
    Johan Wigert

  • Why does transport bar show Midi Out activity from an AUDIO track?

    I am running Logic Pro 9 on Mac OS 10.7.5 and I've noticed lately that The Transport display is indicating Midi output signal when I have an AUDIO track engaged. This happens when I engage the Record-Enable button, while I'm actually recording, or when i merely press Play. The good thing is that it does not affect my ability to record and playback my vocals.
    I should add that this also happens when I have a Software Instrument track playing or recording (but not when only Record-engaged). I'm not sure if that's what's supposed to happen since we are dealing with midi data in this instance. I know there should be Midi-In activity, but not sure about the Midi-Out activity.
    My Audio Track is used for recording vocals from my mic input, which is a separate in put from when I'm recording the output of an external midi instrument. I have checked all of my connections, I have tested my Midi Interface and Midi controller keyboard through Audio/Midi Setup in the Utilities and everything checks out. I have not added, taken away, or replaced any software, nor hardware.
    This is very puzzling to me because as far as my limited knowledge takes me, I do not think I should have any midi activity while I'm recording from my microphone inputs onto an Audio track. Any insight would be helpful.

    There's been lots of talking in this forum about MidiO. Just do a quick search!

  • Multiple use of the same video time line for different audio tracks

    I have a 90 minute video timeline
    I will be putting different audio tracks in multiple languages.
    But as i was just editing i wondered if i could use only a segment (30 minutes ) of the timeline
    along with a 30 minute audio.
    Example:
    So the first thing on the menu will be the whole 90 minute video
    with a 90 minute music track
    Second thing might be the 90 minute video with a 90 minute commentary
    Third thing might be the first 30 minutes of video with a different commentary
    Forth thing on the menu might be the first 30 minutes of video and 30 minutes of
    a different language
    Etc.
    I realize i will need to make space (mb)  for all the audio.....but if i could use the same video or pieces of it
    that would be fantastic.
    If i can do this i am presuming i should use playlists and chapter playlists to get it done?
    I have never done this before and would love some feedback on an over view or tips
    that might save me some guess work
    Thanks for any help :-)
    Soshman

    Soshman wrote:
    Hey Stan!
    Thanks for your help...i think i am really getting this. And have learned a lot.
    I had to go back to my computer programming and flowcharting skills to figure out the flow :-)
    And i still have 153mb to spare when i build it.
    I ended up lining up all the different videos and audios exactly for each time line except for 1 timeline.
    Question: I know if the audio is shorter it will be ok.... but if the audio is longer than the video on a timeline ( and its the audio i assigned it by specify link )
    Will the DVD keep playing until the audio is done or end when the video is done playing?
    2nd Question: I am previewing the playlists with the "Preview from Here" feature
    I specify the link and chapter within that timeline ( it is the only timeline with more than one chaper....the one with the longer audio than video from the question above )
    For most of the audios i only need video chapter 1.....the preview here plays it ok but if i hit the skip to next (in the preview button on theright of the play button)...it goes to the next chapter #2... instead of the next timeline chapter 1 like it is programed to do from the playlist.
    I am wondering if this is just fluke in the preview feature...or will it do that on the actual DVD as well?
    Lastly because i am using different timelines. I am wondering if there are delays between playlists? for example...i have a long audio that continues between three timelines...i have spliced it pretty fine so it picks up perfectly on the next timeline...but i am wondering if the DVD when playing in realtime will have a little black space inbetween timelines.
    Thanks again for your help and time :-)
    Mark
    Hiya Mark.
    DVD-Video is video dominant, with the audio always following the visuals so if the audio ends berfore the video it will not (okay, should not) be a problem.
    However, the other way around could go either way - if the actual video timeline has ended the audio may well truncate so I would personally add videoblack at the very least.
    I am also not at all sure how you are going to work a single contiguous audio file across 3 separate playlists. This sounds flawed in concept to me (have I misunderstood your meaning?). In DVD-Video the format is graphically/visually dominant - the audio must always be tied to a visual asset be it a menu or a timeline - so there is no way to have one piece of audio playing across 3 timelines and having it play back glitch free whilst the timeline changes. You will not get a black space - it will simply stop. So unless I have misunderstood you in some way.........
    As Stan says, preview is flaky - the only way to know for sure is to multiplex & burn.

  • Does anyone know how to separate a movie track from an audio track on the new Mavericks Garage band. It used to be very easy on the iLife 11 version. If anyone could respond ASAP I'd be grateful. I need to make an audio file from a video.

    I urgently need to make some audio tracks from videos using the new 2013 GarageBand. In iLife11 Garageband, this was very easy. However, I cannot see how to do it in the new one. The alternative might be to revert to the iLife11 version, so does anyone know how to do this. It's extremely urgent since I need to produce these for a court custody hearing which will take place at 0800 GMT UK time on 31st October 2013. Please help.
    Thank you.

    When you drag a movie from the Media Browser to the Time lIne in GarageBand, you will see a pop-up "Extracting Audio".
    The Movie and the audio file will appear in separate tracks. You can copy the audio region from the sound track to a different track to keep it safe and then hide the Movie track.
    Léonie

  • How do I separate a video from an audio track?

    I imported an edited .AVI file into iMovie HD. I want to reedit it, but am a complete novice. I would like to realign and edit certain audio in that file with reedited video (sorta basic editing I guess). When I drag clips into the Timeline Viewer it seems that the video and audio are one or at least inseparable. I have no idea how, or if I can, separate the audio track from the video track. Could someone please lend some guidance. Thanks very much.

    TexanMac,
    If a clip is in the timeline you can choose Advance>Extract Audio. That will place a copy of the clips audio in one of the two audio tracks.
    From there you can do what you want with it.
    Mat

Maybe you are looking for