Record rewire track to audio track

Hello
I route the rewire input into an audio track in logic. Can I record the rewire signal directly to this audio track? (even multi-record when routing several rewire tracks into several Logic audio tracks?)
I can here rewire just fine - but when I rec-enable the tracks and press the record button on the transport - it does not record the rewire input.
Anyone? Help appreciated.
Thanks
best

Thanks for the reply.
So with non-real-time bouncing I could go a bit above 100% cpu strain, right? (as I have currently between 80-90% and would like to add a bit of Ozone).
Am I nuts or is there no option in Logic Pro(?) to bounce to 32bit float? I can bounce to mp3 but not to 32 bit float?

Similar Messages

  • Recording ReWire tracks and Softsynths

    Hi there,
    I was wondering if anyones found out how to route a rewire track to an audio track. And how to route a soft synth (post fx) to an audio track for recording.
    Couldnt be done in 7. Was hoping it ould be done in 8

    Route the softsynth to a Bus and use that Bus as an input for an Audio track (this is now possible in L8). If the FX is coming from another Bus/Aux then route that to the recording Bus as well.

  • Recording rewire objects in Logic 7

    Ok, I finally got Reason to play through an Aux track in Logic, awesome. Now the next question...how do you "RECORD" the audio signal? My Aux tracks don't give me an arming button, so how do you record it?? Any help would be much appreciated...
    John

    You don't have to record rewire tracks.
    It's like having a mixer: Reason audio goes into Logic mixer.
    When you bounce you will find in the mix Reason audio too.
    If you want to manage all the Reason parts in Logic then you'll have to Export to audio in Reason and then import the audio files in Logic.
    cheers
    rob

  • Audio interface for recording 2 tracks at once

    What are my Audio Interface options for recording two tracks at once on my Macbook? What have you had success with?
    Thanks

    I'm sure you will get numerous recommendations - what you want really is an Apogee Duet... it's the best thing you'll find for the price and it sounds great...
    I use an Edirol FA-66 with a MacBook with no problems at all, except it sounds a bit "thin"...
    Over to the rest of you...

  • Using Pro Logic X to record. I have several tracks and I'm trying to record an audio track. I have the mic connect to Avalon 737 then into apollo interface. When I record all track are being recorded into that track. I can't just get the audio to record.

    Using Pro Logic X to record. I have several tracks and I'm trying to record an audio track. I have the mic connect to Avalon 737 then into apollo interface. When I record all track are being recorded into that track. I can't just get the audio to record.

    Thanks for responding. Everything seems to work right except for the when I plug into the 737. Ok let me see if I can be more clear. I had this set up done with two representatives of Neumann, and DBox. Here it is I hope this helps. 32 Channel snake (24 Inputs 8 outputs) Channels 1-8 from snake to my Octopre for Drums. From Octropre output quarter inch lines into the Apollo 2, quarter inch input. This is so that the Apollo 2 is taking the drum tracks. Snake Channel 9-12 into Apollo 1 channels 1-4 xlr. Snake Channel 13-16 into Apollo 2 Channels 1-4 xlr. Snake Channel 17 into the 737, output of 737 into Channel 5 of the Apollo 1 quarter inch.
    Ok The Dbox. Sum output L&R into channel input 7&8 of Apollo 1. Apollo 1 output channels 1-8 into summing input channel 1-8 of Dbox. Apollo 1 main L&R going to main analog input L&R of Dbox. Spid out to DAW input of Dbox. I have both ADAT of both Apollos connected by optical wire. Also have port 2 of Apollo 1 into port 1 of Apollo 2 connected by Firewire.  Let me know. Hope I got it right. Thanks for responding.

  • Recording ReWired Audio

    I've ReWired audio into 4 aux objects and I want to record the audio into 4 tracks. I think I need to route everything into 4 audio channels. I've tried various configurations of input and and output settings, but so far nothing seems to work.
    I'd be grateful for any help
    Cheers

    you are welcome
    to understand how Logic Mixer work... you just think to a real Analog Mixer... with more than 500 Channels and all routing are the same as you can find in a real Analog Recording Studio!
    the Audio Mixer in Logic is one of the powerfull feature that you can't find in other DAWs
    Think different
    Think Logic
    G

  • Rewire track problem

    I've got Logic Pro 7.3, and I've never had to create a rewire track before. Now that I've tried, I'm simply met with the message "No more tracks available". This is not different when I create a new project or start up an old one.
    Has anyone met this problem and solved it?
    I have been told, that I can use fxpansion guru through a rewire track from a friend of mine who uses cubase. I assume that it is the same in logic?

    Here goes Ayers Rock,
    Logic has three types of Tracks that are commonly used in production
    Audio-Midi-Audio-Instruments and a Fourth Rewire, not sure as what the big difference is on the Rewire compare to the Audio-Instruments,
    However for a Rewire i would chose create Multiple-Tracks and choose what ever track you want to create as some time L.P. won't allowed you to create another track if its not set-up properly in
    Logic-Set-Up Assistant
    for the amount of tracks you would like to used in your Recording-Session..
    Fr.BlayZay.

  • Help importing bounced rewire tracks

    so i have figured out that you have to bounce the rewire tracks to record them. but when i go to import the bounced track from the bounce folder the aiff file that i bounced is faded, you know like i can't click it, it is not in bold type so i cannot select it to re-import it. so i'm stuck. i have tried to bounce it to other folders, and i have also tried to bounce it with a different suffix. but it never works.
    anyways. sorry if this was already answered elsewere. but i can't figure it out. have been looking for a while now. please help. thanks
    jeff excell

    i am trying to import from the file menu. but also when i try and import from the audio menu it tells me i have to select a track. and to be totally honest i don't know what they are talking about. i have tried to highlight (or simply click on) the one of the four audio tracks in my arrange window. but still it tells me to select a track.... ? so ya
    when you say "put the spl in place (start) select the track" what is that exactly? mabye i should go read the manual more. it is pretty evident that i am a beginner isn't it?..
    anyways, any suggestions?
    jeff excell

  • Why can I only record 2 tracks at a time ?

    Until a couple of months ago I could record 10 tracks at once without a hitch. Then something happened and suddenly I could only record 4 tracks at a time. Now I can only record 2 tracks at once. My logic is completely legal and I'm running a Mac Book pro 2.4 Ghz core 2 duo, 2 GB.
    I posted this same questions a couple of months ago without any reply.
    I desperatly need help.
    Best regards
    Kristjan

    Not RAM related.
    Record tracks have to be set for individual inputs.
    If all your tracks are set to record on inputs 1-2 or Mono 1, Mono 2 you will only have two inputs.
    Make sure Universal Track Mode IS selected in Preferences/Audio and that you indeed have the correct audio driver selected. Now go to your tracks and see how many inputs you have available. If you're recording mono tracks set audio tracks 1 and 2 to record using inputs 1 and 2, Audio tracks 3 and 4 to use inputs 3 and 4, stereo tracks will use both inputs.
    pancenter-
    Tracks have

  • Garageband is not picking sound from builtin mic (rMBP). I recorded some tracks, now it is not working. All other apps can use the mic. Monitoring is switched ON at GB, it picks sound only some other app, eg. Skype, is used to access the mic.

    Garageband is not picking sound from builtin mic (rMBP).
    I recorded some tracks, now it is not working. I have checked GB Preferences, Audio/MIDI > Audio Input > Built In Microphone.
    All other apps can use the mic. Dictation, Skype etc. can use the mic!
    Monitoring is switched ON at GB, it picks sound only some other app, eg. Skype, is used to access the mic.
    Can any one help me, Please!
    Many thanks!

    I have foud the solution - rather stupid. The system setting for audio input was at 70%, increasing it to 100% solves the problem!

  • What's the best way of recording drum tracks onto garageband?

    I usually use garageband to record acoustic tracks, but I want to get some drums involved. The drum kit software on garageband isn't great and pretty difficult to use with just the macbook keyboard, should I get some kind of USB keyboard or drum kit software from elsewhere? If there's a good keyboard for this purpose could someone link me up, because I'd also like to involve a bit of piano/synths in my recordings.
    I should also mention that I'm a student and am therefore on a pretty tight budget!
    Cheers!

    Yes, i suggest you to use a MIDI-Keyboard, even a small one (like my M-AUDIO KeyRig25) is good and fun to use. It's also better to use some specific Audio Plug-Ins which you can use in GB. There are many freewares around.
    Look here: http://www.macmusic.org/software/softwares.php?lang=en
    Here: http://www.gersic.com/plugins/index.php?daCat=-3
    Or here: http://www.dontcrack.com/freeware/
    Cheers!

  • 'disk too slow' problems when trying to record ONE TRACK on my ibook.

    okay- help guys. my new ibook freezes after not even a minute of one track live recording and i ge the disk too slow error. i'm using a basic m-audio usb interface with the internal (4200 rpm) hard drive. i know this isn't a fast hard drive, but SURELY. one track? i've been in touch with m audio, reinstalled driver, repaired hard disk permissions. still no good. i only ever need to record two live tracks at a time, but then i do need to stack them up a bit. is my ibook really incapable of that? i'm shocked if it is. anyone want to buy an ibook?
    any advice much appreciated as i'm going out of my mind.
    happy christmas,
    adam gilhespy

    Adam:
    You haven't given a lot of info, but here are a couple of ideas:
    1) What sample rate are you using? You should be at 44.1 or 48 kHz. Don't even think of anything higher.
    2) Are you recording in a new arrange window? Or are you overdubbing to existing tracks? If so, freeze all your existing tracks.
    3) Are you attempting to use any plugins while you're recording? If you are, turn them off for now.
    4) How much RAM do you have installed? You need at least 768 MB; more preferably.
    5) You're going to need an external drive eventually, but to record one track should be easily done.

  • I can only hear my record enabled track when recording,not when just playing

    This has to be a simple one - normally I can hear my record enabled track when playing back or recording but suddenly i can only hear it when I am actually recording.  I must have accidentally selected an option i am unaware of - can someone please help!
    Thanks

    In case anyone is also stuck I went to Options->Audio where there is an Auto Input Monitoring option.  I turned it off and it fixed my issue.

  • Help with recording 2 tracks at the same time

    Basically I recently purchased an Audio Interface (BEHRINGER XENYX Q802 USB) and I'm having trouble recording multiple tracks at the same time while using it.
    When I set up 2 MONO tracks in my DAW (one using input 1, the other using input 2) all that happens is that I get a recording of one mic over both tracks in my DAW.
    This is probably a beginner post and I have looked it up on YouTube etc. but it just doesn't work for me... Maybe it has something to do with my Interface, but any help will be much appreciated.

    Hi Pancenter,
    Unfortunately I don't have the manual as I purchased it from a friend who failed to provide me with the Manual.
    But thank you for answering as this was what I needed to do.
    Many thanks
    Olie.

  • Trying to record multiple tracks at once with Mixer (Two Microphones)

    I have a Alesis Multimix 4, and two microphones plugged into the mic 1 and mic two inputs.  I am trying to record both, at the same time, to two distinct tracks.  I set Device Class to ASIO in the Audio Hardware section, and delected ASIO4ALL v2 for the Device.  My mixer (I assume) is showing up as USB Aduio CODEC in the ASIO4ALL settings.  When I go back to my multitrack setting, I am given four options for incoming audio: 
    Audio Front Mic Input 1
    Audio Front Mic Input 2
    USB Audio CODEC 1
    USB Audio Codec 2
    No matter what combination I try, when I record, both tracks pick up both microphones.  My goal is to isolate both, so I can apply different settings to both tracks later on, adjust in the mix etc...   The audio only comes through when I pick the USB Audio option.  Thanks in advance. 
    Brett

    I think you've got the right driver selected, otherwise it wouln't work at all. The single most obvious thing to ask you though (I'm sorry if this is too basic) is where you have the pan controls set to? To get each mic to record on a single channel, you'd have to have one panned hard left and the other panned hard right. If you leave them both panned dead centre, that's exactly what you get - both mics on both channels.

Maybe you are looking for

  • Error while compiling procedure

    Hai All I have created a procedure its get created and while executing its get an error My Requirement I have a table called attendance and the fields are Empcode var,name var intime date,outtime date ,WTime number, ETime number ,L_in number, L_out n

  • Installation on Mac OS 10.8.5 SOLVED (missing mach_kernal)

    egon1984 solved it!! Thank you!!! You are the only one who had the answer! After a recent Mac update, the supposed-to-be invisible "mach_kernal" was showing right in the root of my hard drive. I stupidly deleted it. That's why the latest Flash update

  • Root element added in existing mapping PI 7.1

    Hi Experts, I got existing mapping with around 500 fields, the source structure is external defination, they added the root element to existing xsd, when i try to import the external definition into the mapping it is giving following error. Function

  • Odd Airport Extreme Issues

    Hi I'm new to these discussion boards but I was wondering if someone could possibly help me with some airport issues I've been having. My roommate and I both share use an Extreme with Comcast and as far as internet goes everything is great. However o

  • Hacked product photos when online shopping in safari

    This morning, when shopping online via Safari on my iPhone 4S, a very weird thing happened. On several sites (bestbuy.com, jcpenney.com and oldnavy.com) some of the product photos were replaced by random candid shots unrelated to the product. They ar