Record same DV source on 2 computers at once

First, I'm not sure if the FCP forum is the place to ask, but I will be using FCP to do this so I am hoping someone else has maybe tried it. Is it possible to 'split' a DV camera's video to go to 2 different computers at once? I need to capture live video from the same camera on 2 computers simultaneously. I found a product (Laird something) that will do this, but I can't spend the $720 that it goes for. Is there anything else out there? Thanks

I need to capture live video from the same camera on 2 computers simultaneously.
I found a product (Laird something) that will do this, but I can't spend the $720
that it goes for. Is there anything else out there? Thanks < </div>
You probably know our usual response: When attempting to record directly from camera to disk, anything that can go wrong will go wrong. There is nothing more secure than recording to tape.
You have said that you can't spend $800 to get a reliable tool that will do the job but you are willing to risk not getting the video at all by attempting to record to disk?
Doesn't matter, not my problem, I wish you best of luck. There are Firewire hubs, distribution amps, and repeaters on the market. Don't be confused by the apparently subtle differences; they do completely different things. You want a d.a.. The FW hub only allows more devices to share the bus, it won't allow the video signal to go to more than one device. Umm, let me rephrase that, the FW hubs I have in my shop do not distribute multiple copies of the same data. Repeaters are used to resend a FW signal long distances. There may be new tools on the market since I looked.
bogiesan

Similar Messages

  • Is it possible to use same data source for two info cube

    Hi,
    My Problem is in BW we can not have value of material at storage location level.In R/3 also value is maintained at plant level.
    Then we searched and we found out one hot to doc for summarized display of stock values on storage location level.
    Problem is that we have gone live in last December and we are using " 0AFMM_C02 " and it contains around 1,81,26,000 records. and according to note we have to use
    "0IC_C03".
    Both the cube uses same data sources for the data.So, how to get the data for "0IC_C03".
    and how to delete the data of existing info cube.And is it possible to delete data selectively from the info cube.
    Pls. help.
    Regards,
    viren.

    Hi,
    You can't create update rule from PSA.You can create from the infosource or from ODS or from cube to cube or ODS to ODS.
    In your scenario, what you can do is create update rules from the ODS to the new cube and then transfer the data from there. Or from the Infosource create rules to the new data target and then upload the full data and then set up the delta.
    Third option is to create update rules from the existing cube to the new cube and then load all the data one time. Then you can deactivate the update rules as that was needed only for 1 time data transfer.
    Cheers,
    Kedar

  • BI  IDOC type ZSBS042  is not the same as source system idoc type ZSBM023.

    Hi  Evrybody,
    I got an error when trying to initialize the delta load.
    Error Message :
    BI  IDOC type ZSBS042  is not the same as source system idoc type ZSBM023.
    Thanks for  the promt responses
    Regards,
    Zakir SM

    Hi ,
    I checked the IDOC with status 51.. I have this message
    " No status record was passed to ALE by the application ".
    what to do now...
    Rgds,
    Zakir

  • Building SCD Type2 changes. Any record deletion in Source does not expire the Target Record

    Building SCD Type2 changes. Any record deletion in Source does not expire the Target Record. When I Delete any Record in Source Table, I expect the same record should be 'Expired' with 'End_Date' with Active = 'N'. 
    BTW: In 'Table Comp',  I have Checked the 'Detect Deleted rows(s) ...'. /  ' ... largest generated key'  is selected by default..
    This is not happening..! My Update and Insert works fine..!

    Hi
    Do you have detect deletes set on Table Comparison?
    I also add the Map operations to the output of History Preserving and manage each stream of the Insert/Update/deletes separately and control the record start/effective & record end/Expiry dates with more variables based on the stream req, ie updates to end previous record have record end date set to variable for business or run date set to date - 1.
    You only need key gen for inserts (including the deleted record final state)
    Use merge to bring back together.

  • I am trying to import songs to my new macbook pro from my old computer using home sharing. Both computers say that home sharing is now on but neither show up in each other's library menu. I am logged on with the same apple id for both computers.

    I am trying to import songs to my new macbook pro from my old computer using home sharing. Both computers say that home sharing is now on but neither show up in each other's library menu. I am logged on with the same apple id for both computers. and both are on a stable wireless connection

    Logging into itunes store on each machine wth different Apple IDs is OK Autorising each others machines with the other Apple ID is OK. This is completley separate from Home Sharing
    For Home Sharing to work you need to
    File > Home Sharing > Create Home Share.
    You need to select one of the two Apple IDs you are using and ENTER THIS ON BOTH MACHINES WHEN CREATING THE HOME SHARE.
    Home sharing will then work

  • Technical question:  Is it possible to work on the same Lightroom catalog across two computers and have the catalog sync? If so, how??

    Technical question:
    Is it possible to work on the same Lightroom catalog across two computers and have the catalog sync? If so, how??
    Here's a little more information on what I am trying to do.
    I have a desktop computer with 4tb worth of pictures that has Lightroom and Photoshop on it. I also have a laptop with Photoshop and Lightroom. I would like to be able to edit those same pictures with their current edits that are currently on my desktop on my laptop. If this can be done, I'm sure I need to be on the same wifi network for my laptop to be able to access my desktop's photo library. I am technically savvy enough to map a network drive, but how do I get my two Lightroom catalogs to sync when I make a change on one of my computers? Would i be working only on one catalog? Or two separate catalogs that would need to be manually synced to the other computer? Would it be beneficial to put my lightroom catalog on something like dropbox?
    I'd appreciate any information or tutorials if someone knows how to do this.

    I do this by having my LR catalog and photos on an external drive that I swap between the two computers.  I am on Windows and have the same drive letter assigned to the drive on both computers.
    Because the photos are on a portable drive I back up the portable drive to another hard-drive every night or after important work, because portable drives are susceptible to damage or loss.

  • Can I have same Itunes library in two computers?

    I would like to have the same library in two computers.
    If I use home share to import the whole library, Does that mean the library will disappear from the "old" computer? or
    Will I be able to keep the same library in both computers?
    What will happens when I add music to one of the libraries? Will they update? or Do I have to do it manually? Can playlist be imported from home share too? and can I have same playlists in the two computers?
    Thanks!

    Again without firsthand experience my understanding is iTunes copies (not moves) just the media from the Home Shared drive and adds it to your other library as a new item.  It will not affect the original library.
    As for syncing idevices, they are intended to sync with just the original library and only one library at a time.  Apple deliberately designed it this way, and not so you could plug them into a new computer and transfer the contents from the device to the computer (see exception below).  More information:
    Some of the information below has subsequently appeared in a document by turingtest2: Recovering your iTunes library from your iPod or iOS device - https://discussions.apple.com/docs/DOC-3991
    Your i-device was not designed for unique storage of your media. It is not a backup device and media transfer was planned with you maintaining a master copy of your media on a computer which is itself properly backed up against loss. Syncing is one way, computer to device, updating the device content to the content on the computer, not updating or restoring content on a computer. The exception is iTunes Store purchased content.
    iTunes Store: Transferring purchases from your iOS device or iPod to a computer - http://support.apple.com/kb/HT1848 - only purchases from iTunes Store
    For transferring other items from an i-device to a computer you will have to use third party commercial software. Examples (check the web for others; this is not an exhaustive listing, nor do I have any idea if they are any good):
    - Senuti - http://www.fadingred.com/senuti/
    - Phoneview - http://www.ecamm.com/mac/phoneview/
    - MusicRescue - http://www.kennettnet.co.uk/products/musicrescue/
    - Sharepod (free) - http://download.cnet.com/SharePod/3000-2141_4-10794489.html?tag=mncol;2 - Windows
    - Snowfox/iMedia - http://www.mac-videoconverter.com/imedia-transfer-mac.html - Mac & PC
    - iexplorer (free) - http://www.macroplant.com/iexplorer/ - Mac&PC
    - Yamipod (free) - http://www.yamipod.com/main/modules/downloads/ - PC, Linux, Mac [Still updated for use on newer devices? No edits to site since 2010.]
    - 2010 Post by Zevoneer: iPod media recovery options - https://discussions.apple.com/message/11624224 - this is an older post and many of the links are also for old posts, so bear this in mind when reading them.
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive - https://discussions.apple.com/docs/DOC-3141 - dates from 2008 and some outdated information now.
    Copying Content from your iPod to your Computer - The Definitive Guide - http://www.ilounge.com/index.php/articles/comments/copying-music-from-ipod-to-co mputer/ - Information about use in disk mode pertains only to older model iPods.
    Get Your Music Off of Your iPod - http://howto.wired.com/wiki/Get_Your_Music_Off_of_Your_iPod - I am not sure but this may only work with some models and not newer Touch, iPhone, or iPad.
    Additional information here https://discussions.apple.com/message/18324797

  • Prevent the same user login on multiple computers at the same time

    prevent the same user login on multiple computers at the same time

    Is there any way (currently running 2012 Servers) that we can prevent users from logging into multiple domain computers simultaneously with the same username?
    We still want them to log into those computers, just not simultaneously?
    LimitLogin utility not work in Windows 2012 server.
    Thanks.
    Babu
    Unfortunately Windows has never offered this feature as a built-in feature, but there are several possibilities discussed in these articles:
    https://social.technet.microsoft.com/Forums/windowsserver/en-US/0103b5e7-0db5-4fb4-bfe7-d7132983880a/limit-concurrent-logins-on-a-ws-2008-environment
    http://www.edugeek.net/forums/windows-server-2008-r2/61216-multiple-logins.html
    http://windowsitpro.com/windows/prevent-multiple-logons-gpos
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

  • How to set default PDF print locations to be same as source file

    Is it possible to make the "Save to" location for files created using the Adobe PDF print driver to be the same location as the source file?
    When I checked the prefs dialog box in the Adobe PDF print driver, the only setting I found was to make "PDF Output Folder" either the "My Documents" folder or "Prompt for PDF File Name." I wish there were a third option that said "Same as source file."
    -Danny

    Hi Daniel,<br /><br />Yes, it is possible to do so.<br /><br />Here is the solution:<br /><br />1) Open the PDF.<br />2) File->Print<br />3) Click the Properties button available on Print Dialog Box.<br />4) Select the Adobe PDF Settings Tab and you will find static text "Adobe PDF Output Folder", Go for "Browse" button available against that and select your preferred location.<br />5) Now the drop down menu will display all the options i.e. "My Documents" , "Prompt for PDF File Name" and "<Your selected Option>".<br /><br />I hope this will help resolve your issue.<br /><br />Thanks,<br />Atul Agarwal<br />Adobe Systems

  • Need to genereate Target file name same as Source File Name thru Local J2SE

    Hi Everyone,
    I want to genereate Target file name exactly same as Source File Name. I know how to handle this in Central Adapter Engine(Sender & Receiver Communication Channel).
    But I need to do this in Local J2SE adpater engine.
    Please help me in this regard.
    Thanks & Regards,
    Nagaraju

    U can use the parameter to save the filename in the message header
    file.messageAttributes=<name,directory>
    This is similar "Adapter-Specific Message Attributes" concept.
    http://help.sap.com/saphelp_nw04/helpdata/en/6f/246b3de666930fe10000000a114084/frameset.htm
    Regards,
    Prateek

  • Recording from external source

    I am brand new to Mac / switched from pc a week ago. not able to figure out some things yet and havent found answers in support. mostly on the basic stuff. like I was able to record audio from a lp turntable on a pc. it looks like there is no recording program built in to the iMac, or am I wrong? will I have to purchase some type of software to record from external record or tape source?

    Sorry some heavy-handed moderation has been going on here. I accidently duplicated my post when I edited it to say 'Welcome to Apple Discussions'. Then I asked the mods to remove the first post above and they've gone and deleted my second post and yours; I am sorry about that. 
    You posed a question about Real Instruments in the absent post. A Real Instrument can be a microphone input or any device that connects to the Audio-In port (or a USB/Firewire Audio device).
    Hope that helps.
    mrtotes

  • How do I record an audio source outside of Logic while in Logic?

    Hi everyone, I have a question I would like to address to the forum.
    How do I record an audio source outside of Logic while in Logic? For example, I would like to record the audio off a youtube video or dvd to be then used in Logic. I am using a Dididesign M-Box Mini for both my audio input and audio output i.e. all sound is coming in and out of the M-Box. I hope this is an easy question to answer (I am a new Mac user). Thanks in advance.
    Mac Pro   Mac OS X (10.4.9)  

    Use the 3.5mm audio out jack on the back of your computer. Connect it to your audio interface, and record like normal. You need an adapter cable. ( 3.5mm stereo to two 1/4 inch mono) see link.
    http://www.musiciansfriend.com/product/Live-Wire-3.5M-TRSDual-14-Y-Cable?sku=330 481&src=3WBZ4DS

  • Same as Source Printing from Acrobat 9

    Hello Everyone,
    I'm in the process of testing CS4 for deployment to a large print production environment and I'm seeing some interesting behavior in so far as it's handling of color management is concerned, specifically with Same as Source printing from Acrobat.
    I currently have CS2 deployed, and we're using InDesign for page composition. We primarily accept Adobe RGB (1998) and US Web Coated (SWOP) artwork. PDFs are created from InDesign via File > Export, and we have it configured for "No Color Conversion" and "Include all Profiles." As such, our PDFs contain both RGB and CMYK artwork, all of which is tagged with an ICC profile.
    In Acrobat 7, we submit these files "Same as Source" to our RIPs (Fiery and Wasatch) in order to preserve the embedded profiles. All of our color management is handled at the RIP. This works quite nicely. We have tested the submissions and the RGB and CMYK builds (color numbers) come through dead on.
    With Acrobat 9 Same as Source submissions, we are seeing that the builds are changing, and that we are getting a conversion to CMYK.
    -Original PDF file
    Raster RGB - 191,45,47
    Here are the numbers that are submitted by Acrobat, captured by our RIP:
    -Acrobat 7 Same As Source
    Raster RGB - 191,45,47
    -Acrobat 7 Printer/Postscript Color Management
    Raster CMYK- 0,244,245,0
    -Acrobat 9 Same As Source
    Raster CMYK - 0,242,251,0
    -Acrobat 9 Printer/Postscript Color Management
    Raster CMYK - 0,242,251,0
    -Acrobat 9 Acrobat Color Management
    Raster CMYK - 17,248,245,1
    So the question is: What changes have been made in Acrobat 9 to cause for it to handle Same as Source print submissions differently? Why is it that our builds are changing when Same as Source has always been how we get "pass through" color from Acrobat?
    Has anyone else run into this? From the perspective of a RIP-driven, color managed workflow, this is a serious issue, no?
    (This is also posted to the Color Management forum, as it is both a color management concern generally, and an issue specificly related to Acrobat.)
    Matt

    We’ve done some further investigations into the differences in Same as Source printing from Acrobat 7 and Acrobat 9. For our tests we created a simple InDesign file with two red vector rectangles, one defined as Adobe RGB (1998) and one as U.S. Web Coated (SWOP). This file was then exported to PDF with “No Color Conversion” and “Include All Profiles.” The resulting PDF contained both rectangles tagged as specified, as verified with PitStop.
    We then opened this PDF in both Acrobat 7 and 9 and printed to PS files (at the time, the queue for our HP5500PS was selected). Our cursory findings are:
    1. The file sizes differs, which suggests that there is a difference right off the bat.
    2. The printed artwork differs visually, which is troublesome.
    3. In both instances, when opened in Notepad2, the page objects appear to be tagged properly with Adobe RGB and SWOP specified as the objects color space. This, on the other hand, is good.
    a.       Acrobat 7
      i.      RGB – Line 3342
      ii.      CMYK – Line 3400
    b.       Acrobat 9
      i.      RGB – Line 8406
      ii.      CMYK – Line 8468
    4. And here's the biggie: When the PS file created from Acrobat 9 is opened in Illustrator, it says "The document does not have an embedded RGB profile" and it allows for the specification of an RGB profile ONLY. When the PS file created from Acrobat 7 is opened in Illustrator, it says "This document contains objects using both CMYK and RGB color modes. Illustrator allows only one color mode per document. Which color mode would you like to use?" Of course, this PS file SHOULD contain mixed color modes (because it came from a mixed color mode PDF), but only the PS files from Acrobat 7 do. The PS files from Acrobat 9 do NOT. This suggests to us that the PS files (and therefor print data submitted to PS queues as Same As Source) created by Acrobat 9 are not honoring the embedded ICC profiles of tagged artwork.
    Does anyone out there have any thoughts or experience? If what we are finding is true, this is a major problem for Adobe's Acrobat 9 print engine.
    Matt

  • Changes to Same as Source Printing - CS4

    Hello Everyone,
    I'm in the process of testing CS4 for deployment to a large print production environment and I'm seeing some interesting behavoir in so far as it's handling of color management is concerned, specifically with Same as Source printing from Acrobat.
    I currently have CS2 deployed, and we're using InDesign for page composition. We primarily accept Adobe RGB (1998) and US Web Coated (SWOP) artwork. PDFs are created from InDesign via File > Export, and we have it configured for "No Color Conversion" and "Include all Profiles." As such, our PDFs contain both RGB and CMYK artwork, all of which is tagged with an ICC profile.
    In Acrobat 7, we submit these files "Same as Source" to our RIPs (Fiery and Wasatch) in order to preserve the embedded profiles. All of our color management is handled at the RIP. This works quite nicely. We have tested the submissions and the RGB and CMYK builds (color numbers) come through dead on.
    With Acrobat 9 Same as Source submissions, we are seeing that the builds are changing, and that we are getting a conversion to CMYK.
    -Original PDF file
    Raster RGB - 191,45,47
    Here are the numbers that are submitted by Acrobat, captured by our RIP:
    -Acrobat 7 Same As Source
    Raster RGB - 191,45,47
    -Acrobat 7 Printer/Postscript Color Management
    Raster CMYK- 0,244,245,0
    -Acrobat 9 Same As Source
    Raster CMYK - 0,242,251,0
    -Acrobat 9 Printer/Postscript Color Management
    Raster CMYK - 0,242,251,0
    -Acrobat 9 Acrobat Color Management
    Raster CMYK - 17,248,245,1
    So the question is: What changes have been made in Acrobat 9 to cause for it to handle Same as Source print submissions differently? Why is it that our builds are changing when Same as Source has always been how we get "pass through" color from Acrobat?
    Has anyone else run into this? From the perspective of a RIP-driven, color managed workflow, this is a serious issue, no?
    Matt

    mattrichards wrote:
    I hope that the suggestions that this group is dead are wrong...
    We’ve done some further investigations into the differences in Same as Source printing from Acrobat 7 and Acrobat 9. For our tests we created a simple InDesign file with two red vector rectangles, one defined as Adobe RGB (1998) and one as U.S. Web Coated (SWOP). This file was then exported to PDF with “No Color Conversion” and “Include All Profiles.” The resulting PDF contained both rectangles tagged as specified, as verified with PitStop.
    We then opened this PDF in both Acrobat 7 and 9 and printed to PS files (at the time, the queue for our HP5500PS was selected). Our cursory findings are:
    1. The file sizes differs, which suggests that there is a difference right off the bat.
    2. The printed artwork differs visually, which is troublesome.
    3. In both instances, when opened in Notepad2, the page objects appear to be tagged properly with Adobe RGB and SWOP specified as the objects color space. This, on the other hand, is good.
    a.       Acrobat 7
      i.      RGB – Line 3342
      ii.      CMYK – Line 3400
    b.       Acrobat 9
      i.      RGB – Line 8406
      ii.      CMYK – Line 8468
    4. And here's the biggie: When the PS file created from Acrobat 9 is opened in Illustrator, it says "The document does not have an embedded RGB profile" and it allows for the specification of an RGB profile ONLY. When the PS file created from Acrobat 7 is opened in Illustrator, it says "This document contains objects using both CMYK and RGB color modes. Illustrator allows only one color mode per document. Which color mode would you like to use?" Of course, this PS file SHOULD contain mixed color modes (because it came from a mixed color mode PDF), but only the PS files from Acrobat 7 do. The PS files from Acrobat 9 do NOT. This suggests to us that the PS files (and therefor print data submitted to PS queues as Same As Source) created by Acrobat 9 are not honoring the embedded ICC profiles of tagged artwork.
    Does anyone out there have any thoughts or experience? If what we are finding is true, this is a major problem for Adobe's Acrobat 9 print engine.
    Matt
    Matt,
    I think I see why you need PS, maybe to get proper device orientation?
    I downloaded your PS files and distilled. The Acrobat 7 is all mystery meat. The Acrobat 9 is calibrated.
    It looks like 9 is preserving all the tags, and 7 isn't. So the tags may be your problem. One option is decalibrating everything in Acrobat 9 but it's an extra step.
    Maybe Don't Include Profiles out of ID would solve your problem BUT
    To me it looks like 9 is doing the right thing (preserving tags), and 7 isn't. Generally you want calibrated output. Maybe your RIP is performing an extra unwanted conversion of the tagged content that's in the PS output from Acrobat 9...
    Message was edited by: Printer_Rick - added "performing an extra unwanted conversion"

  • I have 10 B. records in the source i want to load it fast

    Hi Gurus,
    I have 10B. records in my source now this is my first load. to load the records fast what are the steps i need to do??
    Please let me know ASAP..
    Thanks
    Kiran Kumar

    Thanks for u r reaply
    what is the best practice could u tell me the brife
    Thanks
    Kiran Kumar

Maybe you are looking for