Record set file names not appearing ?

Could anyone tell me why the file names for the record sets that I'm creating don't show up. The "lightning bolts" representing the data show up under the rs name and it appears within the code, but the file names are not next to the bolts as expected ?
Thank you,
Fred...

Hello PZ,
Thanks for jumping in and trying to help. Sorry for my ignorance when
it comes to this as I am just diving into the world of data bases
using php and mysql. I believe I was referring to the created "table
set name" and the "fields" within them (see bottom) . In the bindings
panel the lightning bolts appear under the created table set, but the
name of the table set is not appearing and these highlighted file
names "fields" that should be next the lightning bolts to identify
them are not appearing. These names , and so on
appear in the code but not in the bindings panel next to the lightning
bolts to help me identify which one I am choosing .
The php page is working the way I want but I have to go through the
process of elimination to figure out which "field" e.g
I'm choosing when placing them in a table in my dreamweaver page. I
hope I am explaining myself properly and thank you very much again for
your efforts.
Fred...
Here is the code I'm talking about and a picture of the database I'm
getting them from.
Year built
Floors
Address
Elevator
Doorman
Gym
Contact
Pets
Parking
Fireplace
Phone:
Email:
Description:
buildingID     propName     address     neighborhood     phone     email     floors     do orman
elevator     pets     yearBuilt     propPic     inParking     outParking     fireplace
description     gym
               14     BC670     280 East 2nd Street     Downtown     2125559876     [email protected]
     6     0     0     0     1977     BC670.jpg     0     0     0     Located between Avenues C and D at
Houston Street ...     0

Similar Messages

CSS file name not appearing accurately

Dear Dreamweaver Forum,
To sort of give you a context of what I've been doing, I've been following Garrick Chow's Dreamweaver CS3 tutorials through Lynda.com.
Specifically, I'm currently studying chapter 7 Typography.
I tried on my own to save a CSS style sheet.
It seems no matter what I do I am not able to get the CSS panel in Dreamweaver CS3 to save a style with the name I give it in the Save As dialog box.
Below is a 5-step walkthrough of what I'm talking about with two questions in blue after step 5:
Step 1:
Here I have a situation in which I would like to take the style currently in the CSS Styles panel <style> and turn it into an external style sheet I can use with my other .html pages.
Step 2:
Therefore, I used shift + click and selected all the selectors (or should I call them “rules”?) in the CSS panel.
I then right-clicked and selected “Move to External Style Sheet”. I then get this resulting dialog box:
Step 3:
I want to create a new style sheet and so I click the radio button next to “A new style sheet”:
Step 4:
I navigate to my ch7_typography root folder and, in the “Save As” field I type “styles.css”:
Step 5:
The problem is that after hitting the Save button, Dreamweaver saves the css file not as “styles.css” but as “untitled.css”.
My question is why did it do that?
My other question is how can I get Dreamweaver to save the .css file as “styles.css” or “whatevername.css”
I choose to give to it?
Thanks!

This is how I do it.
Hit File > New > CSS.
You now have a blank, untitled CSS page.
In Code View, switch to your HTML page. Scroll down to the CSS rules -- these are between the <style type="text/css> and </style> tags. Highlight and copy your CSS rules (Ctrl+C) without the <style> tags.
Switch to CSS page and hit paste (Ctrl+V).
File > Save As > some-filename.css Done.
See also Link Stylesheet.
http://alt-web.com/DEMOS/DW-Link-Stylesheet.shtml
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
http://alt-web.blogspot.com

Layout Par file name not appearing in list while creating new Layout

Hi
I downloaded com.sap.portal.layouts to modify the light_framework page to suit my needs, renamed it to com.mycomp.portal.layouts, modified the page, created a par file and uploaded it thru NWDS.
When I go to the portal to create a new Layout, I do not see my custom par file in the list.
I have even uploaded it from the portal: System Administration -> Support -> Support Desk -> Portal Runtime -> Administration Console -> Archive Uploader. Even after it was successful, I was not able to see the par file listed while creating a new Layout.
How do I get my Layout par file listed do i can create my Layout?
Thanks
J

Hi Bala
I never had a problem with the JAR files in this par file while opening, nor did I have to manually add anything.
I know it has been successfully uploaded in the portal, as I can see my par file in the Archive Deployment Checker.
What could be wrong? Is there something else I have to put in the portalapp.xml to make it visible in the list?
Thanks
J

This file does not appear to be a photoshop file error.

Hello,
I know this has been covered a few times already, but none of the previous threads about it were able to help my situation.
Ok so here is what i did:
Exported a JPEG from a timeline in FCP. Brought that JPEG into PS (i am using CS3), and changed the image size from 1920x1080 to 720x480. Then saved as a JPEG, didn't tick any boxes, just used default save as settings.
I then brought those images into my Encore DVD Project, added them to the library, then placed one into a already made menu, and "sent to back".. so it became the new background. I did this with two menu's today. Note i have actually done this same exact process many times without problem. I then tried to build a dvd image of the project, and i got the "this file does not appear to be a photoshop file". Now it won't even let me open those menu's (plus another one, which i made a long time ago, and have even successfully built DVD's with), to edit them. I tried removing all the new JPEGS i added today, from the library, but still i get the same message.
The menu's that i now can't open, took a very long time to make, and i need to have this DVD completed ASAP.. as it is being released world wide in a couple of weeks and i need to get it replicated. So i don't actually have time to remake these menu's. So if anyone can help me, that would be much appreciated, as i have studio exec's cracking down on me.
Thanks in advance :-)

Now, if one Imports the JPEG with its extension changed to PSD as a Menu, then the Menu is created, including the necessary Layers. The Menu is NOW a PSD, and when Opened in PS will reflect the Layer structure (try this at home). If one had constructed Buttons in the JPEG, they would now only be graphics on that one single Background Layer in the JPEG. They would not function as Buttons, but could be useful graphics for other things. One would then need to add real Button Layer Sets to the PSD to be able to add any navigation.
Back in the post above, I suggested doing the Save_As to JPEG to see how things get changed. Use that in another test - Import that JPEG as a Menu. In Encore, try to Link to what had originally been Buttons in that Imported JPEG. What happens? Can you Link to them, even though you are now working with the created PSD?
Now, add a Button, or two, from the Library. Choose Edit in Photoshop, and look at the Layer and Layer Set structure. Things have changed from the original JPEG, with only the Background Layer. You now have that Library Button's Layer Set structure.
Good luck, and hope that this helps,
Hunt
Here are looks at the structure, using the Library Menu Business>Clock:
The Menu in PSD with the Layers Palette Open
Same Image With Layers Flattened to Save As a JPEG
What the JPEG Looks Like As a Flattened JPEG
The only way to Import that JPEG into Encore as a Menu would be to change the file extension to PSD, but what appear to be Buttons would NOT be Buttons, but just static pixels in the Background.
Message was edited by: Bill Hunt - Added graphics

Error Message** This file does not appear to be a photshop file

Okay.. so I have been researching forums and have seen this message throughout, my issue seems to be slightly different. When I am in Encore CS3 and trying to create a menu, I import my background designed in photoshop, have the buttons set up correctly, test it in the preview screen and everything works correctly, the file is recognized as a psd file, and even saves as a project in encore. When I go to build my DVD I get an error saying "This file does not appear to be a photoshop file, although when I check the properties it recognizes it as a psd.. any suggestions?

Adam,
Not sure that I understand this message:
And Actually yes I do have a circle in my button to play now.
Can you enlighten me a bit. Does this mean that En has accepted the PSD, or something else.
If something else, I would also look closely at the Layers in the PSD. While I do not recall very small Layers creating an issue in En, they have been known to do so in PrPro. This is often something like a very small logo, on a Layer by itself, with nothing but transparency around it. In PrPro, a message, similar to yours is offered up, but that is in Import, and you got it only with the Build.
Too bad that the Check Project function is not a full pre-flight test of all Assets, like in InDesign, but it falls short, as it only checks for DVD-compliance in the navigation. I've filed Feature Request for more, but since En is built on the Sonic AuthorCore modules, I suppose that it's not as easy, as I would have hoped for.
Good luck, and help me understand the above,
Hunt

How I can sort music files (audiobook) in music player on iPhone by file name, not by title name?

I have audiobook of abt.500 files, all titles are the name of the book. iPhone music player does not understand sorting by file names, but by title, hterfore it plays files chaotic. So, how I can sort audiobook files in music player by file name, not by title name?

I have the same problem.
I've went through the pains of merging all chapters into one big file for each and every audiobook, so that at least the chapters don't get played in random order. Month and month of work….. In iTunes 12.01. I can now order my audiobooks by title or by author.
But once they're uploaded to my blo*dy expensive iPhone 6Plus 128 (which I bought especially to have all my music and my audiobooks on one device) my audiobooks are NOT sorted by author, but by Title.
So, let's say I have 15 books by Ken Follet, they don't appear as Ken Follet > Title of the book but they are sorted alphabetically with all the other titles of other authors.
iPods where originally designed for music and audiobooks, but each and every version of iOS makes handling your music and especially your audiobooks harder and harder….
I am very disappointed and after so many years of using apple, I am considering to move on to android devices.

Sort downloads by file name not type?

Wondering if anyone can help me here. I'm trying to either make a script or automator workflow that will sort my downloads by file name, not file type.
To cut to the point, I'd like say Reno 911, The Daily Show and the Colbert Report to go to a Comedy Central folder, My shows to go to my folder and my wife's to go to hers, just keep the downloads tidy as they come in instead of having to clean the downloads folder manually every day.
There a easy way to do this?

Why not have two separate user accounts - your's and your wife's. Then she can select her own download folder in Safari preferences, and you can select yours. Set up the folder to display in List View and click on the Name column as the sort column (twice for descending order.)

File name not showing up at RIP from Intel Pro

I have both G4 and newer Pro G5 running CS3. If I send an ID file to the RIP from my G4 the file name will appear correctly in the Queue window. If I send an ID file from my newer Pro Intel it shows the printer name (ie 1800) but not the file name. This makes it hard to identify different jobs at the RIP. I've looked at my Print & Fax System preferences and they seem to be the same. Any ideas? Thanks, Roger

10.4.11 and ID 5.0.2
I just upgraded my G4 to CS3 from CS2 where I had no problem. The G4 has no problem even with CS3. I thought it was probably a CS3 issue until I upgraded, not an Intel issue. I may be wrong.

This XML file does not appear to have any style information associated with

Hi All,
I have IDOC to XML file scenario.
In SXMB_MONI, it showed the message processed successfully (checkered flag).
I open the payload in the target, I'm able to see the XML format without error.
then I checked in RWB the overall status is successful.
But when I checked the detail (message content) I got the following message:
"This XML file does not appear to have any style information associated with it".
So physical file created is like corrupted.
If using XML marker to open the file it show warning "Invalid Unicode Sequence".
The thing is when rerun the whole interface again, which is mean the same idoc send from the source, the file created successfully. Sometimes need to rerun twice or more than that to get the file.
Anyone has idea on what is wrong here?
Thanks,
Victor.

Hi Baskar,
Thanks for your reply.
It's PI 7.0.
Overall status is successful but when I go to RWB to check the message content i got the error message above.
Target system is only normal FTPS server.
XML file is created as well but it's showing error when we open it.
The weird thing is without fixing anything if we rerun the same interface with same set of data sometimes the error is gone by itself.
Thanks,
Victor.

This XML file does not appear to have any style information...

hello,
i am a new oracle spatial developer and also i am new in XML. i want to see the demos in oracle 10g enterprise edition. i imported the necessary dump files and i created the necessary user defined as mvdemo/mvdemo. when i want to see the demos in mapviewer, i come accross this error:
This XML file does not appear to have any style information associated with it. The document tree is shown below.
     <oms_error>
Message:[XMLHelper] xml eÅleme isteÄi incelenirken hata.
Fri Feb 25 01:37:39 EET 2005
Severity: 0
Description:
Message:[XMLHelper] xml eÅleme isteÄinde geÃ§ersiz geometri.
Fri Feb 25 01:37:39 EET 2005
Severity: 0
Description:
Message:GML Geometry type Point not suppoted.
Description:
     at oracle.sdovis.JSDOGeometry.fromNodeToGeometry(JSDOGeometry.java:3185)
     at oracle.lbs.mapserver.core.XMLHelper4Mapper.parseGeoFeature(XMLHelper4Mapper.java:712)
     at oracle.lbs.mapserver.core.XMLHelper4Mapper.convert(XMLHelper4Mapper.java:223)
     at oracle.lbs.mapserver.core.XMLHelper4Mapper.convert(XMLHelper4Mapper.java:167)
     at oracle.lbs.mapserver.oms.getMapRequest(oms.java:678)
     at oracle.lbs.mapserver.oms.doPost(oms.java:314)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:810)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:322)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:790)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:270)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
     at java.lang.Thread.run(Thread.java:534)
</oms_error>
for now, i dont know what to do.. if someone recommend any useful idea, i would be greatful.
best regards..

hello,
thank you for your reply..
i made some changes and i dont see the errors that i mentioned above any more. but still some problems..
firstly, i decided to change the settings in the mapViewerConfig.xml file in order to add a new datasource. i copied it and that is the reason why you see the '!' in my explanation. the new situation in the mapViewerConfig.xml file like this:
<map_data_source name="mvdemo"
jdbc_host="c-0y5wp0jvd2bf8"
jdbc_sid="orcl"
jdbc_port="1521"
jdbc_user="mvdemo"
jdbc_password="nzKVD/KFZYkGc0uF7EL7/vPibuAPpQ9j"
jdbc_mode="thin"
number_of_mappers="3"
/>
"c-0y5wp0jvd2bf8" is my computer name. jdbc password was encrypted when i started the mapviewer. this is the new screen of the mapviewer after starting:
05/03/01 17:49:58 INFO [oracle.lbs.mapserver.oms] oms root path: C:\mapviewer10
12_qs\mv1012qs\oc4j\j2ee\home\applications\mapviewer\web\
05/03/01 17:49:58 Oracle Application Server Containers for J2EE 10g (10.1.2.0.0)
initialized
05/03/01 17:49:58 INFO [oracle.lbs.mapserver.core.MapperConfig] using default co
nfig file: C:\mapviewer1012_qs\mv1012qs\oc4j\j2ee\home\applications\mapviewer\we
b\WEB-INF\conf\mapViewerConfig.xml
05/03/01 17:49:58 WARN [oracle.lbs.mapserver.core.MapperPool] destroying ALL map
maker instances.
05/03/01 17:50:17 INFO [oracle.sdovis.CacheMgr2] Spatial Data Cache opened. Regi
on=SDOVIS_DATA.
05/03/01 17:50:17 INFO [oracle.sdovis.CacheMgr2] max_cache_size=32 MB.
05/03/01 17:50:17 INFO [oracle.sdovis.CacheMgr2] sub region sdovis_subreg_mvdemo
_jdbc:oracle:thin:@c-0y5wp0jvd2bf8:1521:orcl created in cache.
05/03/01 17:50:17 INFO [oracle.lbs.mapserver.core.MapperPool] added a mapper ins
tance to the pool [data src=mvdemo]
05/03/01 17:50:17 INFO [oracle.lbs.mapserver.core.MapperPool] added a mapper ins
tance to the pool [data src=mvdemo]
05/03/01 17:50:17 INFO [oracle.lbs.mapserver.core.MapperPool] added a mapper ins
tance to the pool [data src=mvdemo]
05/03/01 17:50:17 INFO [oracle.lbs.mapserver.core.MapperConfig] Map Recycling th
read started.
05/03/01 17:50:17 INFO [oracle.lbs.mapserver.oms] *** Oracle MapViewer started.
when i open the page ( http://localhost:8888/mapviewer/ ) and press the submit button of the "sample map request" section to see the result of the demo, i come accross this error:
This XML file does not appear to have any style information associated with it. The document tree is shown below.
     <oms_error>
Message:[XMLHelper] xml eÅleme isteÄi incelenirken hata.
Tue Mar 01 17:53:51 EET 2005
Severity: 0
Description:
Message:[XMLHelper] xml eÅleme isteÄinde geÃ§ersiz geometri.
Tue Mar 01 17:53:51 EET 2005
Severity: 0
Description:
Message:GML Geometry type Point not suppoted.
Description:
     at oracle.sdovis.JSDOGeometry.fromNodeToGeometry(JSDOGeometry.java:3185)
     at oracle.lbs.mapserver.core.XMLHelper4Mapper.parseGeoFeature(XMLHelper4Mapper.java:712)
     at oracle.lbs.mapserver.core.XMLHelper4Mapper.convert(XMLHelper4Mapper.java:223)
     at oracle.lbs.mapserver.core.XMLHelper4Mapper.convert(XMLHelper4Mapper.java:167)
     at oracle.lbs.mapserver.oms.getMapRequest(oms.java:678)
     at oracle.lbs.mapserver.oms.doPost(oms.java:314)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:810)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:322)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:790)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:270)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
     at java.lang.Thread.run(Thread.java:534)
</oms_error>
in addition, i use firefox as my default browser. however, i tried it in the iexplorer also but gave the same error again.
i look forward to taking a response. thank you very much for your care again.
regards

I keep getting "This XML file does not appear to have any style information associated with it."

I keep getting a message that reads "This XML file does not appear to have any style information associated with it. The document tree is shown below." when I try to view certain images with the document tree reading something like this:
<Error>
<Code>AccessDenied</Code>
<Message>Access Denied</Message>
<RequestId>BCC4C0545EAAB7AE</RequestId><HostId>3LxcI9VY5wksYdmblAgu2dYu9ZfkLVZJWYhDtoIdRIE4HyARxC+ogJXkApL6U+tT</HostId>
</Error>
I tried updating Firefox and that didn't work. All I could find was that it could be a proxy thing, but I'm set to "no proxy" in my network settings so I'm stumped.

You can try these steps in case of issues with web pages:
You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and remove cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Files do not appear in Finder

When I launch Finder, files do not appear in any folder except "All My Files." If I look in any other folder, such as my user folder, Documents, Downloads, Applications, etc., nothing appears. It is as if those folders are completely empty -- but they are not, because I can open files from "All My Files" and see that they are located in the various folders that appear to be empty in Finder.
For example: when I open "Applications" from my Dock, I see all the application icons. If I open "Applications" in Finder, I see . . . nothing at all.
I have tried searching for answers in the forums and see nothing that helps. Thanks.
Also, I can't even tell you what operating system I am using, because when I click on "About This Mac" it does nothing. I know it is a relatively recent application, since I purchased this MacBook Pro within the last 6 months.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

File names not showing up

I am running Audition 3.0 on a BRAND NEW HP Envy running Windows 8.1 For the last month AA 3.0 has been working
fantastic until just this morning when I opened a file and it appeared on my timeline just fine.
BUT, the name of the file did not appear on the upper left hand portion of the screen - nothing, nada, blank.
This is causing a TREMENDOUS slowdown, need to get this fixed...any solutions???
Kevin

You might want to ask in the Photoshop.com forum:
http://forums.adobe.com/community/photoshopdotcom

Getting error logical file name not maintained adequtely

Hi,
when i execute a z report and press the download botton getting error logical file name not maintained adequtely,see long text.
Below code i wriien. Please somebody help..
    DATA: lt_rows TYPE lvc_t_row.
    CASE e_ucomm.
      WHEN 'DOWNL'.
Determine and construct OS specific file name                        *
        PERFORM get_file_name_for_os.
in the above perform , i wriien
FORM build_file_name USING pf_os
                           pf_with_file_extension
                           pf_param_1
                           pf_format
                           pf_fname.
DATA: lf_para1(20) TYPE c.
pf_param_1 hold the materialnr with leading zeros not prefered in    *
download file name                                                   *
WRITE pf_param_1 TO lf_para1.
CALL FUNCTION 'FILE_GET_NAME'
    EXPORTING
CLIENT                        = SY-MANDT
      logical_filename              = 'Z_MATERIAL_BOM_FILE'
      operating_system              = pf_os
      parameter_1                   = lf_para1
PARAMETER_2                   = ' '
PARAMETER_3                   = ' '
USE_PRESENTATION_SERVER       = ' '
      with_file_extension           = pf_with_file_extension
USE_BUFFER                    = ' '
    IMPORTING
EMERGENCY_FLAG                =
    file_format                   = pf_format
    file_name                     = pf_fname
EXCEPTIONS
   file_not_found                = 1
   OTHERS                        = 2
Error handling.
CASE sy-subrc.
    WHEN '1'.
      MESSAGE e014(ba) WITH 'Z_MATERIAL_BOM_FILE'.                     "error message i am getting      LEAVE.
    WHEN '2'.
      MESSAGE e213(ky) WITH 'Z_MATERIAL_BOM_FILE'.
      LEAVE.
ENDCASE.

Hi.
In file txn,
click on "Logical File Name Definition, Cross-Client" from the left.
Then click position and check for your logical file name.
If you dont get it, it means you need to create it. You can click on New Entries to create.
Thanks
Mani

"This file does not appear to be a Photoshop file"

Ok, I used the first edition of Encore in the past, but I just installed the version that came with Premiere CS3. I used Photoshop 6.0 to do my menus in the past, but just installed the trial of Photoshop CS3.
Two things:
My old menus I created in Photoshop 6.0 won't import into the new Encore.
The new menus (I opened my old menus with CS3 and saved them out.) won't import into Encore either. In both cases, Encore says:
"This file does not appear to be a photoshop file."
The files are indeed all photoshop .PSD files and the Photoshop 6.0 files are actually menu files that were in the same .ncor project I used on the old Encore and opened on the new one.
Why won't Encore read these?
Thanks!

Bummer,
I hoped that I had helped.
Let's play 20 Questions:
The PSD files were originally created in PS 6, and you have Opened them in PS-CS3, from which they were Saved. Correct?
Did CS3 throw any error messages?
You state that they were Menus in Encore. Which version, and did they function perfectly there?
I assume that when used in a previous ver. of Encore, they did function, but now you have Opened, worked on and Saved from PS-CS3. What changes were made?
Was the Color Mode, or Bit-Depth changed, or were Alpha Channels introduced?
Has your OS been changed?
Will these files still Open fine in PS-CS3?
I'm trying to find the point that they ceased to Import, as they should and find out what might have changed with them. You might want to do a bit of a timeline on the life of these files, i.e. 1.) created in PS6. 2.) used as Menus in Encore2. 3.) Opened and changed in PS-CS3 by doing X. 4.) Saved out as PSDs and attempted to Import into Encore CS3 with above error message...
Something has to have changed, and the task is to find out what that is/was.
Hunt

Record set file names not appearing ?

Similar Messages

Maybe you are looking for