Record the NOC codes at Job level for a particular country

Hi,
How do we record the NOC codes at job level for a particular country say for example canada?Which infotype the NOC codes exist and can be added to employee record?Is it through statistics infotype?
I could find that table T5K13 can hold these codes at job level, but unable to find a way to create  a relationship between a job and the NOC codes.Please help if there is a way in our current SAP environment to record those codes on the job and if so how?
Also, if the initial configuration has not been done  to add these codes at the job level what would be required to allow  to maintain this.
Please help!!!
Thanks in advance.
Rakesh

hi
in the view V_T5K13 , double click on the job code , there will be feild to add the noc code
Regards
sameer.

Similar Messages

  • Error in posting :First create the jurisdiction code at state level ()-URGE

    Hi,
    We are getting ERROR "First create the jurisdiction code at state level ()" at the time of postiong . This is HST calculated on benefit that we are trying to post;;
    GL account tax category is defined as '<' in FS01 and posting without tax  allowed is not checked. Are we missing aything;
    Regards,
    Neelima

    Hi Neelima,
    Tax Jurisdiction code is related mainly to US.
    Please check the if tax jurisdiction code is maintained in SPRO > Financial Accounting > Financial Accounting Global Settings 's basic settings part. If not, maintain the same for the state. This might help you.
    Best Regards,
    Venkat.
    Edited by: Venkateswara Sarma Bhamidipati on Jan 1, 2011 4:45 AM

  • HT204387 Where do you find the "key code" on your phone for pairing bluetooth to your new car?

    Where do you find the "key code" on your phone for pairing bluetooth to your new car?

    You have it backwards.  You enter the car BT system key code into the phone when initailly pairing the devices.  Consult your car sound system manual to find the code.

  • How to deactivate the "left top corner SAP menu" for a particular screen

    Hello Friends..
    We have a requirement to implement a "Non Disclosure Agreement(NDA)" for one of our SAP systems. NDA screen will have 2 buttons, "I agree" and "I disagree" which pops up when you log in to the system(after filling up our user id and password and hit enter). If we click on "I agree", it will allow you to continue with the log in and takes you to sap easy access screen. If we click on "I disagree", then session will be terminated.
    But, the NDA window which is being popped up is also a SAP screen which has SAP menu on top left corner. Without clicking on "I agree" or "I disagree" and if we try to select "Create session" option in SAP menu on top left corner, then it is taking us inside SAP(sap easy access screen) by bypassing the buttons.
    Request your help on how to deactivate the "left top corner SAP menu" for this particular NDA screen. (SAP menu to be available with other screens and it should not be available just for the window which is being popped up after log in and before SAP easy access)
    Many Thanks in advance..
    Vinay

    Hi Vinay,
    Try this if it works -
    in your first screen for the NDA screen, on the memnu bar select - EXTRAS - SETTINGS - Select the check box 'Do not display menu, only display favourites'.
    on calling the next screen , disable this option in the PBO of the screen.
    Try and let me know if it works.
    Thanks & Regards, Swapnil Mishra

  • How to enable DFF for a particular country on a Standard OA Framework page

    Hi All,
    I have a requirement for iExpense. Here I need to enable a DFF and that should be display only for a particular country say 'India'. I have done this for the core apps forms but for OA Framework pages I am not sure.
    In core apps we have used context senstive rather than Global.
    Could you please help me on this that how can I enable DFF for a particular country.
    Thanks,
    Sam

    hi
    i think u r talking about Domestic and Recoverability DFF,u need to find out the id of those LOV fields ,u can find them going in view source ,right click go to view source and search the fields against the prompt appearing against these LOV like (Recoverability) u will get the id of this field ,then extend your CO and hide this field in processRequest method of extendedCO according to your org id .
    thanx
    Pratap

  • How do I solve the error code -19946, Microsoft Outlook for Mac 2011

    I'm getting an error: error code -19946
    Error
    Could not synchronize record: <Message Name> to Exchange server: <Exchange Server Name>
    Details
    ChangeKey is required for this operation.
    Error code
    -19946
    when using Microsoft Outlook for Mac 2011. When looking up the error, Microsoft has a solution for windows users, but not for mac users. http://support.microsoft.com/kb/2556352
    Any ideas? Solutions? Help!

    As Office is not an Apple product, I strongly recommend asking in the Microsoft Office:Mac forums here:
    Office for Mac
    Everyone there is a Mac user AND an Office user, something you can't say about Apple's forums. You will get the fastest help there and I think you will find the contributors more than helpful.

  • Record the CPU Load in a log for Windows 2008 R2

    Use performance monitor and log it to a file.

    Hi,
    I am an Oracle DBA. I need to record the load of the CPU for windows 2008 R2. Load in the sense Total Memory, Available Memory, Cached and Free. All together into a log.
     Kindly suggest me on the same.
    Thank you.
    This topic first appeared in the Spiceworks Community

  • Urgent:First create the jurisdiction code at state level

    when  i enter the details in MIRO transaction  and save , i am getting the above error.
    i have maintained the tax jurisdiction code. still it shows an error.

    Hi, Chandar.
    Please check if the company code has a jurisdiction code set in transaction OBCL.
    SPRO -> Material Management -> Purchasing -> Environment Data -> Define Tax Jurisdiction.
    This should solve the issue.
    M Trein

  • For Cisco SPA112: can I make dial plan that can use 6 digit number without having to dial the area code 00357 but not for 0030?

    Cisco SPA112:
    Can I make dial plan that can use 6 digit numbers without having to dial the area code 00357 but also being able to dial 0030xxxxxxxxxx numbers?

    If you include a country number, you have to drop the initial 0 from the area code. eg +31 10 2345 6789 instead of +31 (0)10 2345 6789

  • Can we restrict deliveries at plant level for a particular period

    Hi all,
    At month end , if we want to close the sale, and restrict all the delievries in that month for a particular plant.. will that be possible, if yes how?
    can anyone advise.

    Hi,
    Temporary Soluition may be
    In the Material Master,there is a setting for Plant-sp.matl status.
    You can use this for stopping the posting .
    it can be used to stop the material from being used in POs, BOMs and movements etc. by plant (you would also need to use the sales block -Dchain specific status to prevent sales orders).
    Thanks,
    Raja

  • How to get the measure total at row level for another measure calculation in DAX?

    Hi There,
    Using DAX, I am trying to get an expression for a calculated measure as follow:
    So basically, I would like to get the AMeasure total highlighted in yellow in the A2Measure calculation:
    Smeasure -(Ameasure total * WMeasure) where Ameasure total is the one highlighted. 
    I think my question would be how to get the total of a measure in order to used in the calculation of another measure.
    Thanks and best regards,
    Joss

    Hi Joss83,
    If you're trying to get the result for [AMeasure] at the total level (i.e. 5.09 in your example) you can do this by creating a version of this measures that is evaluated after ignoring the filters (indirectly or explicitly) placed on
    the 'Customer' and 'Player' columns. You may also need to ignore the filters place on some other tables or columns that must be ignored in order for the correct total to be returned.
    Without knowing much more about your data model, I can only take a vague guess as to what this calculation would look like in your scenario:
    AMeasureTotal:=
    CALCULATE(
    [AMeasure],
    ALL(Customer[Customer]),
    ALL(Player[Player])
    You can read more about the 'ALL' DAX function here:
    http://technet.microsoft.com/en-us/library/ee634802.aspx
    Hope this helps,
    Michael

  • When are the unlock codes coming out (Canada) for the new iPhone 4?

    I was told a few weeks ago that the new unlock codes for the latest iphone 4 were not yet released by apple. Does anyone know when they are coming out?

    Hi. ONLY the cellular provider can authorize unlocking. In Canada, only Rogers and Fido provide unlocking.
    Stedman

  • How do you record the iPod touch 5th generation screen for free

    I treys that weebly website but that doesn't work it says the website doesn't exist 

    Reflector - AirPlay mirror your iPhone or iPad to any Mac or PC, wirelessly.
    but not free

  • What is the t-code (or menu path) for Joint venture accounting?

    Please help. points guaranteed. Thanks!

    I try your t-code but get:
    Transaction GJVC is an area menu and cannot be executed.
    Please inform me how to access it. Thanks!

  • Debugging the program that will get triggered for a particular output type

    Hi all,
             I have one program,which will get triggered when a Sales order of type 'VOR' is created.Whenever 'VOR' order is created it will trigger the 'ZALT' output type.And this output type 'ZALT'has been configured to my program.This output type configuration has been set up by my functional consultant.
    My problem is I created Sales order of type 'VOR'.But I want to debug my program,which has to be triggered because of that 'VOR' sales order type,which in turn triggers 'ZALT' output type and in turn triggers my program.
    My problem is I created Sales order of type 'VOR' by keeping debugging point in my program.But it is not going to my program and simply displaying sales order has been saved.
    So is the outtype has been configured properly?.Do I need to go to my functional consultant?Could anyone explain in this regard?
    Rgds,
    Balaji

    Hi Balaji,
    If possible, try to repeat the output in the output type messages screen of VA02 and change its dipatch time to '1'(Through further data). Now put the break point in the program assigned to output tye 'ZALT'(You can see this in the TNAPR table) and run the program RSNAST00 through SE38. The program will stop at the break point.
    If its not possible to repeat the output and if you want to check it the first time the output type is processed, ask the functional consultant to change the dispatch time in the condition record that is being retrieved for proposing the output type to '1'. Now run RSNAST00. The program will stop at the breakpoint.
    Thanks,
    Vinay

Maybe you are looking for

  • Creative zen 4gb won't turn on manually and acting stra

    My Creative zen 4gb can only be turned on when I connect it first to the computer, and after that, I can turn it on without the use of a computer. But if I don't use for a few hours, it won't turn on again, and I have to connect it to the computer ag

  • WIndows user can no longer log in.

    Ok, here's where I'm stuck. We no longer have our server (Running OSX Server 10.4.3), which serves as the Open Directory Master and the PDC for our Windows boxes( all running XP SP2), running DHCP services. We instead installed a Linksys RV016 router

  • How can you tell if all photos in an event have a Place assigned?

    How can you tell if all photos in an event have a Place assigned, without clicking every photo in the event individually with the Info bar open to see if there is a little map in the bottom left hand corner please? cheers

  • Permissions issues with multiple volumes

    I'm currently running one boot volume with Snow Leopard and one with Mountain Lion on my Mac Pro.  Due to current software compatibility-related issues, I need to be able to use both volumes regularly as part of my workflow for now, though I plan to

  • Adding a object to the next request

    Hi all, Suppose your in a JSP section at the top of your page, and later there is an html button, that will submit the form. I know you can write code such as:     request.setAttribute("name", object);However, that attribute is set to the previous re