Record to both CF AND SD cards on 5Dm3

Can we record to both the CF and the SD cards at the same time on our 5D3 cameras?
I thought we could, and I set up the camera's menu to:
Record Func. = Rec to multiple
Playback = [2]
But when I record a clip, it ONLY seems to record to where I have the "Playback" pointed.
Is that Record to Multiple ONLY for still images?

mjroddy wrote:
Almost 100 views, but no answers. I'd have thought this, being the Canon site, I'd have had a quick Reply here from someone.
Any suggestions where I should pose my query that I might get an answer soon? I have an upcoming shoot, so I'd like to solve this ASAP.
Thanks!
Most people on here shoot stills. Not that there aren't videographers, but most of the regulars seem to be on the stills side. That probably has something to do with the low response.
I'd recommend posting on CanonRumors.com. Lots of very knowledgeable people there; and no shortage of 5d3 owners. Post to this Forum:
http://www.canonrumors.com/forum/index.php?board=47.0

Similar Messages

I have just bought a new iPhone and gave my old one to my Mum. My problem is that even with a new SIM and phone number I seem to be getting her messages as well as mine on my thread. They are also being recorded as both sent and received so she must be pa

I have just bought a new iPhone and gave my old one to my Mum. My problem is that even with a new SIM and phone number I seem to be getting her messages as well as mine on my thread. They are also being recorded as both sent and received so she must be paying twice for each SMS sent. Help please

Wipe iPhone/iPad/iPod touch clean
There are a few steps to do:
Switch off iMessage in Settings > Messages
Switch off FaceTime in Settings > FaceTime (iPod touch 4th Generation or later, iPhone 4 or later and iPad 2 or later)
Delete iCloud in Settings > iCloud > Delete Account
Finally Settings > General > Reset > Erase All Content and Settings.
Un-register your device: https://supportprofile.apple.com
Now you can sell/give.
Now, you should get her a new Apple ID to sign in the options above.

How to synchronize the data acquisition from both GPIB and DAQ card

I want to begin/stop acquiring the data from GPIB and PCI6024E card into Labview at the same time. Since the acquisition from GPIB is quite slow comparing to the one from DAQ card, I can not put both of them in the same loop structure. Is it possible to synchronize them?
Thank you!

Hi,
I wanted to save data acquired from NI-DAQ (for example, NI 9234) in a file using the DAQ-mx ANSI C Code. The response I got was as follows:-
One way to do it is with TDMS logging. DAQmx comes with functions designed to log to a TDMS file. This is a special file type that is used for collecting data in a logical format. It can be displayed in a TDMS viewer where data is separated into groups and channels. NI-DAQmx provides examples for how to log to TDMS. Look at the TDMS examples in the C:\Users\Public\Documents\National Instruments\NI-DAQ\Examples\DAQmx ANSI C\Analog In\Measure Voltage directory.
However, now I want to know is there a way that using that same C code, can we save the data in a .txt file format (Text File) instead of a TDMS file? We actually want to access that file through MATLAB (that's why we want to save it in text format).
Also on an other note, is there a way we can access & open TDMS files by MATLAB?
Thanks,
Sauvik Das Gupta

Xorg with Both Radeon and Nouveau Cards

I seem to be having a problem getting my two cards to play nice with each other. They will both work by themselves and are detected properly. I seem to have a mistake in my configuration file when configuring the second screen. I did start with the example from the Xorg wiki page. If someone could please take a look at my Xorg.conf file and spot my error, I would appreciate it.
I am using the OSS drivers first, but would like to use the proprietary nVidia driver once I get this working, but one step at a time.
Video Card Information:
$ lspci | grep VGA
01:05.0 VGA compatible controller: ATI Technologies Inc Radeon HD 3200 Graphics
02:00.0 VGA compatible controller: nVidia Corporation G84 [GeForce 8600 GTS] (rev a1)
Errors after running "init 5" with the ATI card first (full xorg.conf & Xorg.0.log):
# cat Xorg.0.log | grep EE
[ 1133.326] Current Operating System: Linux atw-01 2.6.34-ARCH #1 SMP PREEMPT Mon Jul 5 22:12:11 CEST 2010 x86_64
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 1133.337] (II) Loading extension MIT-SCREEN-SAVER
[ 1133.350] (EE) Screen 1 deleted because of no matching config section.
[ 1133.867] (EE) Logitech Logitech Illuminated Keyboard: failed to initialize for relative axes.
Errors after running "init 5" with the nVidia card first (full xorg.conf & Xorg.0.log):
# cat Xorg.0.log | grep EE
[ 2307.780] Current Operating System: Linux atw-01 2.6.34-ARCH #1 SMP PREEMPT Mon Jul 5 22:12:11 CEST 2010 x86_64
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 2307.791] (II) Loading extension MIT-SCREEN-SAVER
[ 2307.803] (EE) Screen 1 deleted because of no matching config section.
[ 2308.587] (EE) Logitech Logitech Illuminated Keyboard: failed to initialize for relative axes.
When I look at the log file, it seems to load both cards OK, but then it always unloads the second one after the "(EE) Screen 1 deleted because of no matching config section." entry.

So it seems that nouveau only supports dual head using Randr (source). I removed the "Screen x" lines from 10-monitor.conf and both cards fired up at once. So, it looks like I will need to try this using the driver from Nvidia.
What's interesting is that I cannot have the proprietary Nvidia driver with xf86-video-ati, even though it is shown here. Am I missing something here or is that wiki section in error?
I will try using an alternate ATI driver tomorrow.
$ sudo pacman -S xf86-video-ati
resolving dependencies...
looking for inter-conflicts...
:: libgl and nvidia-utils are in conflict. Remove nvidia-utils? [y/N]

Error ID 30252 when trying to purchase apps (both paypal and credit card)

On PlayBook AppWorld, when trying to purchase an app, I get the following error:
"There is a problem with your credit card authorization. Please try again or visit BlackBerry World Support for more information. (Error Id: 30252)"
I'm 200% sure my credit card details are correct - I have used it several times today and know there is plenty of credit available on it. Have tried entering the card 3 times now.
I have also tried PayPal, and I got through to authorizing with my paypal password and have recieved the "You have signed up for preapproved payments" email from PayPal. I guess getting that email means I definitely did enter my password correctly. But it gives me a "Problem encountered with PayPal authorization. (Error: 30252)"
So, same error code with both credit card and paypal. Serching the knowledgebase for 30252 yields zero results. Help??

I've got the same issue using three different credit cards. Help!

How to make mono recording play both left and right channels

I have an old mono recording that plays only on the left channel. How can I copy it to play on the right so I'll hear it on both channels? I put it on itunes and then tranferred it to Garageband in hope I could finally get it to play on both channels. I've tried everything in Garageband and nothing works. It seems simple to me, just duplicate the one channel to the other. Garageband says if you use the compressor it will play in both channels, but it won't. Any ideas? It's a recording from a band I was in back in 1966. We used state of the art reel to reel but it was mono! All these years I've tried to figure how to fix it. Thanks

I already recorded it from the tape to CD Spin Doctor through the line in and as I said it only comes out on the left channel. So then it's on itunes and I then transfer it to Garageband but it still is only on the left channel.I guess I could do this the old fashion way and get a mono plug to re-record to Spin doctor but in this day and age of sophisticated computer software I thought there may be an easier way. I guess I wasted my money thinking Garage band would help me edit this recording. Oh well, such is life!!!!

D800 file compatibility: Has anyone experienced problems with loading D800 files onto the iPad using the camer connector kit? I have tried both RAW and JPEG using SDHC and CF cards and the iPad(3) doesnt recognise any of the files.

Has anyone experienced problems with downloading Nikon D800 files to the iPad3 using the camer connector kit? I have tried .RAW and JPEG (of various sizes) on both SD and CF cards, but the iPad doesn't recognise the files.
I have seen various forums discussing Lightroom and PSE updates that are required to process .NEF files but I can't find anything on the iPad/camera connector issue.
I dont have any problem if I put the SD card straight into the SD slot in my iMac and Aperture will process the files fine, but I would really like to be able to download and view files on the move on the iPad.
Any advice appreciated?
PS - saw something that suggested the iPad had a maximum file size of 16mb for photos, not sure if this is correct, but I have tried smaller JPEG files and they still aren't recognised.

If your camera supports both PTP and Mass Storage Device modes, it may be necessary to use both modes to import all media content.
If some files do not import as expected using one mode, try switching to the other mode and importing again.
Note: Some cameras may refer to PTP as Pictbridge or PTP/Pictbridge.

How to count records from 2 tables and show in RDLC Report

hi all,
its being a one day searching for the solution but No Luck.
I have two SQL tables tblstudetail and tblfeereceiptdetail.
i just want to count records from both tables and show in RDLC report.
I tried SQl Query Like This:
select a.session, a.course,
Count(CASE a.ADstatus WHEN 'OK' THEN 1 ELSE 0 END ) AS Admission,
Count(CASE s .I_receiptstatus WHEN 'OK' THEN 1 ELSE 0 END) AS Feeprint
from
tblstudetail a
FULL join
tblfeereceiptdetail s on s.studentID = a.studentID
where a.session = '2015' AND s.Fsession = '2015' AND a.adcat = 'Regular'
GROUP BY a.session,a.course
ORDER by a.course
The result Show the Same Value in Both columns
Session    Course      Admission       FeeDetail
2015          B.A. I               275              275
2015          B.A. II              307             307
2015         B.A. III             255            255
2015          B.Sc. I             110             110
2015   B.Sc. II           105            105
2015          B.Sc. III            64               64
Actully I want to Count How many ADMISSION have been Taken(FROM tblstudetail) and How many FEE RECEIPT have been Print (From tblfeereceiptdetail).
please guide me for this as soon as possible.
thanks in advance...

I am counting 'OK' in both the table columns I.e 'ADstatus' in tblstudetail and 'feereceiptstatus' in tblfeereceiptdetail
please suggest me

Token and smart card reader are not detected on Mavericks if not plugged on a USB port during system boot

Well, both token and smart card reader are not detected on OS X 10.9 if not plugged on a USB port during system boot. So, if I am already working within the system and need to use my certificates I have to plug the token or smart card reader on a USB port and restart Mavericks.
Token is a GD Starsign and Smart Card Reader is a SCR3310 v2.
Thoughts?

SCS is a very good app, since I've read that Apple has discontinued support for PC/SC interfaces after the release of Mountain Lion.
(My previous installation was a Mavericks upgrade from Lion)
However, I don't know what and how to debug using Smart Card Services. Do you know any commands to use?
Apparently, the SC reader reports no issues: the LED is blinking blue when no smart card is present and becomes fixed blue when a smart card is inserted – according to the manuals, this shows that there is correct communication between the OS and the CCID reader.
I don't know what to do; I'm beginning to hypothesize it's a digital signer issue. In fact, my smart card only supports one application called File Protector (by Actalis) to officially sign digital documents. This application seems to have major difficulties in identifying the miniLector EVO.
The generic and ambiguous internal error comes when I try to manually identify the peripheral.
Athena CNS is one of the Italian smart cards and is automatically recognized and configured (so it's correct – no doubts about this), while "ACS ACR 38U-CCID 00 00" seems to be the real name of the miniLector.
(I'm assuming this because System Information also returns that the real manufacturer is ACS... bit4id is a re-brander)
However, when I click on it and then tap OK, it returns internal error.
As first attempt, I would try to completely erase&clean File Protector files to try a reinstall. Then, if this still doesn't work, I'd debug using the terminal.
So:
- Do you know any applications to 100% clean files created by an installer?
- Do you have in mind any solutions that I might have forgotten?
Thanks in advance from an OS X fan!

TS1292 Purchased gift cards about a year ago. Misplaced two of them. Found them yesterday, tried to use one today. Invalid. If the money is tagged to the card code why is it invalid? Now have to take photos of both sides and find receipt? Guess out $20?

Purchased gift cards about a year ago. Misplaced two of them, but Found them yesterday. i tried to use one today. Invalid. If the money is tagged to the card code why is it invalid? Now have to take photos of both sides and find receipt? Finding the receipt might take as long as .finding the cards. If I paid hard earned money for the card from a computer company why would that card not be in their data base waiting to be activated? I guess I am out $20 to Apple for not activating immediately! My account was hacked once so I won't put a credit card in and live with gift cards. Now I am getting hit for $20, two gift cards for ten each. I now question who and how people are making money?? Is my only solution, buy card, redeem code instantly, purchase item?

Hi Oxfordataloss,
Thanks for posting. I'm really sorry you've had such problems with BT, it's certainly not the kind of service we would hope to provide. I'll take your comments on board and if you don't receive the final bill as expected please drop me an email with the account details and a link to this thread for reference.
Cheers
David
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

Unable to replicate both Numeric and alpha numeric vendors records from R3

Dear all,
In our ECC 5 environment, we have some vendors who master record numbers that are numeric internally assigned i.e 7000000 or 23000000 and some alphanumeric externally assigned i.e SmallBusiness1 or Grinad10. This is posible as you may know via vendor account groups.
We have implemented a classic scenario in SRM 4, Server 5 environment, therefore we need to replicate ECC backend vendors masters. We initally set SAP's AB business Partner (vendors) number range in SRM to A - zzzzzzzz and created numeric number ranges to match thoes set up for all our vendors in ECC.
When we ran BBPGETVD only the alpha numeric vendors records replicated down to SRM. The numeric were ingnored. The BBPGETVD t-code was reporting that the other vendors had incorrect data.
We then chnaged the AB Business Partner (vendor)number range to 000000001 - 999999999 and ran BBPGETVD. Only then did the numeric vendors get replicated down to SRM. But the issue is now, I cannot replicate the alpha numeric with out chaanging the number range back to A - zzzzzzzzz.
Question,
How can I set the Business Partner(Vendor) number range in SRM to anable the replication of both Numeric and Alpha numeric assigned vendor records down to SRM.
Thanks,
Grace

Christophe,
PLEASE HELP I HAVE AN URGENT ISSUE NOW!!!
On the subject of setting back the internal BP number range, does SRM expect it to be set for example to:
01 0000000001 - 0000999999?
Should the grouping for this internal number range be also ways set to 0001. Iam refernceing the settings in our sandbox client, they seam to be set up that way.
If its set to say 0003, will this cause a problem?
Because we have set all our BP ranges to external, any ORG unit, USER or position that we created after we "removed" the internal number range does appear to be working.
I have noticed this. when I login as a new user and try to create a shopping cart, tthe product category drop down does not work on the "new user".
If I go in the BP transaction and search for this new user or new unit org units that where created after the removal of the internal number range nothing is found!. The last internal BP number is 105.
Question.
If I set the internal number range back to
01 0000000001 - 0000099999 and set the current number to 106, then delete and recreate the org units, do you think this will work?
Please help I need to get this issue sorted out because as you said no new org unit/user can be setup.
Thanks Again.
Grace

HT4101 Camera connector kit not working with ipad3. Not at all able to see any photo . Have tried both the USB connector directly with camera and thru card reader. Tried by copying photos to DCIM folder also.

Got a iPad camera connector kit. It is not working as expected. It is not able to read any photos. Both the USB connector and sd card reader arenot showing any photos on iPad. Tried copying all photos directly in DCIM folder. Still no result.
Any other setting needs to be changed?

Hey, thanks for your updates.
The photos are 8 character long and extension is .jpg
The file names are 8 characters long with 3 as alphapet followed by an "_" and then 4 numbers.
Initially the photos were in a folder inside DCIM folder. I manually copied them to DCIM folder, still no result.
Can you advice.

Query to delete both parent and child record....

hai.........
I tried to delete a record from the table.... but i get a error saying 'child record' exist cannot delete record'.... can u plz tell me the query to delete both parent and child record....
plz help me.....
anoo...

Hello,
Is already answered in {thread:id=824593}. Please mark the question as answered.
Greetings,
Roel
http://roelhartman.blogspot.com/
http://www.bloggingaboutoracle.org/
http://www.logica.com/

My credit card has been charged for book, however my purchase history shows no record of the transaction and I have not received the book. The online problem reporting system does not have options to report this incident. Who can I cal

My credit card has been charged for book, however my purchase history shows no record of the transaction and I have not received the book. The online problem reporting system does not have options to report this incident. Who can I call?

Would be problems with purchases, billing, and redemption option. It's not 100% exact to your issue, but it will get you to the right department.
Go here https://expresslane.apple.com/GetproductgroupList.do then select ITunes, then Store, then Purchases, Billing, and Redemption. Then.. probably pick "My topic is not listed."

How can I use QuickTime to make a screen recording that has both video and audio?

How do use QuickTime to make a screen recording that can be saved with both video and audio together?

do you know of any software that would record a QT movie playing on my Mac screen with both audio and video?
I have used Ambrosia's Snapz Pro X ($69) for years, but they are currently upgrading their Kext (Kernel Extension) software for changes inroduced by the Lion release so it might not be your best bet at this time. I also use ScreenFlow but it is a combination capture and editing utility which runs $99 and may include more features than you may need or will use. Have also tried Screenflick ($29) which, to some extent, appears to have a functionality somewhere between that of Snapz Pro X and ScreenFlow. It is a bit more complicated to set up but for the price might be the best bargin at this point. All three can capture the entire screen or a portion thereof, with or without mic/line and/or system audio. (Or at least they all will as soon as Ambrosia updates its Kext routine.)
Here is a URL link posted by QTKirk three days ago to an article that recaps of a number of currently available third-party screen capture apps from around the world several of which may interest you: http://mac.appstorm.net/roundups/utilities-roundups/10-screen-recording-tools-fo r-mac/

Record to both CF AND SD cards on 5Dm3

Similar Messages

Maybe you are looking for