Record Windows Mixer with MAudio?

I would like to record windows sound output with an MAudio Firewire 410 soundcard? I used to be able to "Record What You Hear" with an old Soundblaster card, but the Maudio seems to disable the windows mixer (at least in Windows XP) in favour of its own driver panel.
I've tried various routings in Adobe Audition but no luck so far. If anyone has ideas / please let me know if it's possible with the MAudio hardware.
I found this clip on youTube
http://uk.youtube.com/watch?v=dGP4ZHDBkEs
which shows someone setting up Audition to record windows mixer stream. If I watch the clip on high quality + full screen it looks like he has an MAudio delta (when he selects the driver from the drop down).
Is there any reason if it does work on an Maudio delta that it shouldn't work on a MAudio FW 410?

The M-Audio mixer screen should allow you to select Software Return 1/2 as your source. Then in Audition hardware Setup screen select M-Audio ASIO as your driver and then (03S)Monitor L Delta AP or something similar for the FW 410 as your input source.

Similar Messages

Recording DJ mixes with Logic?

Hi!
Wondering if anyone uses Logic Pro 7 to record their DJ mixes and how they go about doing that...
my main question is- is there a way to get around the 15 minute recording limit?
Also, are there any useful tips anyone has for mastering the mix?
Thanks!

I do this. I just record my mixes as a stereo track and then cut them into tracks and master them in waveburner. Push A in logic and a window will open that will allow you to change the maximum recording time. This will allow you to record your whole mix without having to stop and start. Ben

Trying to record Stereo Mix with a monitor through my headphones. Using Screenium to record Audio and Video, using Avid MBox Mini with MXL 909 Microphone for the audio through the interface.

Basically, what I am trying to do is this:
Record my screen through Screeenium, record my voice as audio through an Avid MBox Mini (interface) with a MXL 909 microphone to pick up the audio. I have all that figured out. I'm able to efficiently record my audio and screenplay through these instruments and programs. What I am having trouble with is the stereo mix. I am running into a slew of problems here... My goal: Add on the audio of a game that I am playing (for example, Amneisia) so that the audio for my game will be picked up internally, and not through the speakers to be recorded through the microphone. I want there to be no external sound except me talking into my microphone. I also want to be able to HEAR the audio of the game through my headphones (and if possible, myself as well, through a monitor maybe?)
Problems I have run into so far:
-Haven't gotten it to pick up in game audio at all while using headphone. Can't figure this out
-Downloaded soundflower, have the output as soundflower. Not picking up anything, will put all my sound and midi settings at the end.
-When I do record through my microphone, it is only picking up a single channel (left earpiece only, no right channel)
-I have figured out it is NOT the equipment, I use Pro Tools and am able to pick up both channels with my mic, recorded a few tests. It's settings and I can't figure it out
-Trying not to run 16 million programs while running the game, will cause lag.
Summed up:
Trying to record:
-Audio from gameplay of any game I am playing through alternative route of speakers (do NOT want to record game audio through speakers, internally)
-Record voice through Avid MBox Mini and MXL 909 microphone.
-Record screen gameplay through Screenium
I followed a guide that told me to achieve "stereo mix'' I need to download soundflower and follow "X" steps. That is done and these are my current settings:
Audio Midi Setup - Stereo Mix custom Aggregate Device, Soundflower (2ch) selected, Avid Mbox Mini selected, Soundflower Output #1 has 2 channels (1-2), using Avid MBox mini for "Input" in order to record. Using Soundflower AND Avid MBox mini as "Output" in order to hear the sounds and replay game sounds (could be the problem? Maybe?)
Sound Settings - Output Stereo Mix (custom channel) Input Avid MBox Mini (recording)
I'm hoping this isn't too hard to understand.. I'm VERY bad at explaining information regarding computers.. It's hard becuase I don't understand it. I can clarify anything that I am able to, so any help on finding certain things would be greatly appreciated.
My computer: Macbook Pro MAC OS X Lion (11G63) 10.7.5 2.4 GHz Intel Core i7 4GB 13333 MGz DDR3 (If any of this is imporant)

Hey guys,
I tried to do some research and it looks like you need to have an external device and its drivers, such as an external microphone, installed on the computer to record audio that can be saved as a sound file. Another Suggestion is to try an auxiliary spliter for your headphones and external speakers?
What software are you using to record your game?
If anyone knows anything different, please let me know.
Thank you for being a part of the Lenovo Family,
Catie
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Donate KUDOS and Click "Accepted Solution"

Recording via Optical S/PDIF on Windows XP with Macbook Pro

Hi,
I am using a new Macbook Pro with OS X 10.6 and XP (SP3). I am using optical S/PDIF to carry the signal from an Apogee Rosetta 200 Analog to Digital audio converter to the computer. I get signal from the converter on the Mac side, with Logic Pro 8, but am not getting any audio on the Windows side with any of my audio recording programs. Is the optical I/O on the Macbook supported in Windows on Bootcamp? What do I need to do to get it working properly?
Thanks,
Melissa

Found a thread here.
http://www.gearslutz.com/board/showthread.php?s=9cf0ae9b492f8e40ff794d55c2392267 &t=61431&page=2
Looks like others are having success. Try trashing the file ~/Library/Preferences/com.apple.audio.AudioMIDISetup.plist
And restart. See if that fixes anything.

Hey guys ! I use logic pro ... not logic proX ... and i want to record my drums with 4 mics. I got a mixer with also 4 inputs ( Behringer Xenyx QX 1202USB ) But in my Logic i can't take the third input !?!? i can only choose 1 and 2 .... Please Help :)

hey guys ! I use logic pro ... not logic proX ... and i want to record my drums with 4 mics. I got a mixer with also 4 inputs ( Behringer Xenyx QX 1202USB ) But in my Logic i can't take the third input !?!? i can only choose 1 and 2 .... Please Help

Friedrich sp wrote:
Can you send me a mixer wich can do that, please ?
Who do you think I am? Santa Claus?
What you need is not a mixer, but an audio interface with at least 4 mic inputs. There is a lot of choice there, but you should indicate a budget. You can go from, say, € 300 to € thousands, if you want.
Roland UA 1010
Focusrite Scarlett 18i8
However, there are other options (like multi-out mixer plus multi in interface, or standalone mic preamps plus interface with 4 inputs, etc). I have little experience using these however so I really cannot say much about which one(s) to get. The two mentioned above both have four mic preamps, but they are by no means the only way to do it.
The cheapest solution I can think of is to get a second 1204USB, plug it in, and in OS X create an Aggregate device (=the two are being merged into 'one virtual' interface with two discrete stereo (= four discrete mono) inputs. Disadvantage: you keep the same (limited) soundquality of the 16 bits convertors. Getting any of the interfaces mentioned earlier will also mean you'll make the significant step up from 16 to 24 bits sound.

How to make column headers in table in PDF report appear bold while datas in table appear regular from c# windows forms with sql server2008 using iTextSharp

Hi my name is vishal
For past 10 days i have been breaking my head on how to make column headers in table appear bold while datas in table appear regular from c# windows forms with sql server2008 using iTextSharp.
Given below is my code in c# on how i export datas from different tables in sql server to PDF report using iTextSharp:
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
using System.Windows.Forms;
using System.Data.SqlClient;
using iTextSharp.text;
using iTextSharp.text.pdf;
using System.Diagnostics;
using System.IO;
namespace DRRS_CSharp
public partial class frmPDF : Form
public frmPDF()
InitializeComponent();
private void button1_Click(object sender, EventArgs e)
Document doc = new Document(PageSize.A4.Rotate());
var writer = PdfWriter.GetInstance(doc, new FileStream("AssignedDialyzer.pdf", FileMode.Create));
doc.SetMargins(50, 50, 50, 50);
doc.SetPageSize(new iTextSharp.text.Rectangle(iTextSharp.text.PageSize.LETTER.Width, iTextSharp.text.PageSize.LETTER.Height));
doc.Open();
PdfPTable table = new PdfPTable(6);
table.TotalWidth =530f;
table.LockedWidth = true;
PdfPCell cell = new PdfPCell(new Phrase("Institute/Hospital:AIIMS,NEW DELHI", FontFactory.GetFont("Arial", 14, iTextSharp.text.Font.BOLD, BaseColor.BLACK)));
cell.Colspan = 6;
cell.HorizontalAlignment = 0;
table.AddCell(cell);
Paragraph para=new Paragraph("DCS Clinical Record-Assigned Dialyzer",FontFactory.GetFont("Arial",16,iTextSharp.text.Font.BOLD,BaseColor.BLACK));
para.Alignment = Element.ALIGN_CENTER;
iTextSharp.text.Image png = iTextSharp.text.Image.GetInstance("logo5.png");
png.ScaleToFit(105f, 105f);
png.Alignment = Element.ALIGN_RIGHT;
SqlConnection conn = new SqlConnection("Data Source=NPD-4\\SQLEXPRESS;Initial Catalog=DRRS;Integrated Security=true");
SqlCommand cmd = new SqlCommand("Select d.dialyserID,r.errorCode,r.dialysis_date,pn.patient_first_name,pn.patient_last_name,d.manufacturer,d.dialyzer_size,r.start_date,r.end_date,d.packed_volume,r.bundle_vol,r.disinfectant,t.Technician_first_name,t.Technician_last_name from dialyser d,patient_name pn,reprocessor r,Techniciandetail t where pn.patient_id=d.patient_id and r.dialyzer_id=d.dialyserID and t.technician_id=r.technician_id and d.deleted_status=0 and d.closed_status=0 and pn.status=1 and r.errorCode<106 and r.reprocessor_id in (Select max(reprocessor_id) from reprocessor where dialyzer_id=d.dialyserID) order by pn.patient_first_name,pn.patient_last_name", conn);
conn.Open();
SqlDataReader dr;
dr = cmd.ExecuteReader();
table.AddCell("Reprocessing Date");
table.AddCell("Patient Name");
table.AddCell("Dialyzer(Manufacturer,Size)");
table.AddCell("No.of Reuse");
table.AddCell("Verification");
table.AddCell("DialyzerID");
while (dr.Read())
table.AddCell(dr[2].ToString());
table.AddCell(dr[3].ToString() +"_"+ dr[4].ToString());
table.AddCell(dr[5].ToString() + "-" + dr[6].ToString());
table.AddCell("@count".ToString());
table.AddCell(dr[12].ToString() + "-" + dr[13].ToString());
table.AddCell(dr[0].ToString());
dr.Close();
table.SpacingBefore = 15f;
doc.Add(para);
doc.Add(png);
doc.Add(table);
doc.Close();
System.Diagnostics.Process.Start("AssignedDialyzer.pdf");
if (MessageBox.Show("Do you want to save changes to AssignedDialyzer.pdf before closing?", "DRRS", MessageBoxButtons.YesNoCancel, MessageBoxIcon.Exclamation) == DialogResult.Yes)
var writer2 = PdfWriter.GetInstance(doc, new FileStream("AssignedDialyzer.pdf", FileMode.Create));
else if (MessageBox.Show("Do you want to save changes to AssignedDialyzer.pdf before closing?", "DRRS", MessageBoxButtons.YesNoCancel, MessageBoxIcon.Exclamation) == DialogResult.No)
this.Close();
The above code executes well with no problem at all!
As you can see the file to which i create and save and open my pdf report is
AssignedDialyzer.pdf.
The column headers of table in pdf report from c# windows forms using iTextSharp are
"Reprocessing Date","Patient Name","Dialyzer(Manufacturer,Size)","No.of Reuse","Verification" and
"DialyzerID".
However the problem i am facing is after execution and opening of document is my
column headers in table in pdf report from
c# and datas in it all appear in bold.
I have browsed through net regarding to solve this problem but with no success.
What i want is my pdf report from c# should be similar to following format which i was able to accomplish in vb6,adodb with MS access using iTextSharp.:
Given below is report which i have achieved from vb6,adodb with MS access using iTextSharp
I know that there has to be another way to solve my problem.I have browsed many articles in net regarding exporting sql datas to above format but with no success!
Is there is any another way to solve to my problem on exporting sql datas from c# windows forms using iTextSharp to above format given in the picture/image above?!
If so Then Can anyone tell me what modifications must i do in my c# code given above so that my pdf report from c# windows forms using iTextSharp will look similar to image/picture(pdf report) which i was able to accomplish from
vb6,adodb with ms access using iTextSharp?
I have approached Sound Forge.Net for help but with no success.
I hope anyone/someone truly understands what i am trying to ask!
I know i have to do lot of modifications in my c# code to achieve this level of perfection but i dont know how to do it.
Can anyone help me please! Any help/guidance in solving this problem would be greatly appreciated.
I hope i get a reply in terms of solving this problem.
vishal

Hi,
About iTextSharp component issue , I think this case is off-topic in here.
I suggest you consulting to compenent provider.
http://sourceforge.net/projects/itextsharp/
Regards,
Marvin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Unable to perform multi audio tracks mixing with Audio Mixer

How do you get a simple multi track mix with the Premier Pro 1.5 Audio Mixer?
I got 2 audio clips, each sitting at the start of its own separate track (Audio 1 and Audio 2). I just want to mix them into the Master track. Simple enough.
So I go to the Audio Mixer. Position the CTI at the start of the tracks and hit the red RECORD button. The red spot starts blinking. Then I hit the START/STOP button expecting the tracks to start mixing into the Master track. Instead, I get this error message
"PLAYER ERROR: You cannot record without enabling at least one track for recording."
I get the same problem if I try the mix onto a submix track.
What am I missing? I combed through the Premiere Pro User Guide and J. Rosenberg's Premiere Pro Studio Techniques but to no avail.
Thanks for any help.
JB.

Jacques, I havn't seen 1.5 for a while, so I need to stress that what I'm about to say is more of an educated guess linked to a rough memory.
Each audio track in the mixer has a small chip (tickbox in 1.5??) that you click in order to enable that track for recording. In CS3 it's a little microphone.
Having said that, I DON'T think that's going to give you what you want, as the intention of the recording functionality in PP is to record audio FROM AN EXTERNAL SOURCE (like a microphone) straight to an audio track, say, when doing a Voice Over for some video.
You can't "mix down" to the master, as the master is not a track per se. It's just a "final" level control. The master will always be the sum of the active tracks, and THAT'S what will be rendered in the final output.
You can still "live mix" your audio with the faders, it's just that those movements get recorded as keyframes on each of the tracks you modify (including, BTW, the Master).
The advantage to this workflow is that every fader move you make is infinitley editable... a small error when riding the faders can easily be fixed by dragging keyframes.
HTH.
Matthew

Unable to record internal audio with RecordMyDesktop

In order to record sound and video from my desktop, I installed RecordMyDesktop (https://wiki.archlinux.org/index.php/RecordMyDesktop) and followed the instructions from post #4 and #6 on a thread about "Recording internal audio with alsa and recordmydesktop" (https://bbs.archlinux.org/viewtopic.php … 3#p1359593). When I try to record with "recordmydesktop --device looprec", it will not start recording and closes with the following error:
Initial recording window is set to:
X:0 Y:0 Width:1920 Height:1080
Adjusted recording window is set to:
X:0 Y:4 Width:1920 Height:1072
Your window manager appears to be i3
Initializing...
Buffer size adjusted to 4096 from 4096 frames.
Opened PCM device looprec
Couldn't set format.
Error while opening/configuring soundcard looprec
Try running with the --no-sound or specify a correct device.
If this information would be helpful, I use alsamixer and "aplay -l" gives the following:
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC663 Analog [ALC663 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 1: ALC663 Digital [ALC663 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: Loopback [Loopback], device 0: Loopback PCM [Loopback PCM]
Subdevices: 7/8
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
Subdevice #2: subdevice #2
Subdevice #3: subdevice #3
Subdevice #4: subdevice #4
Subdevice #5: subdevice #5
Subdevice #6: subdevice #6
Subdevice #7: subdevice #7
card 1: Loopback [Loopback], device 1: Loopback PCM [Loopback PCM]
Subdevices: 8/8
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
Subdevice #2: subdevice #2
Subdevice #3: subdevice #3
Subdevice #4: subdevice #4
Subdevice #5: subdevice #5
Subdevice #6: subdevice #6
Subdevice #7: subdevice #7
I can record from the microphone with with the command "recordmydesktop". I succeeded in recording the internal audio with audacity by choosing the device "looprec" for recordings. I'm not sure why RecordMyDesktop gives an error while Audacity does not. Below is my ~/.asoundrc, which I copied from the aforementioned thread. I am not knowledgeable, but I guess there is a mistake in it? Would you please assist me solving this error? Thank you for your time.
pcm.!default {
type asym
playback.pcm "LoopAndReal"
#capture.pcm "looprec"
capture.pcm "hw:0,0"
pcm.looprec {
type hw
card "Loopback"
device 1
subdevice 0
pcm.LoopAndReal {
type plug
slave.pcm mdev
route_policy "duplicate"
pcm.mdev {
type multi
slaves.a.pcm pcm.MixReale
slaves.a.channels 2
slaves.b.pcm pcm.MixLoopback
slaves.b.channels 2
bindings.0.slave a
bindings.0.channel 0
bindings.1.slave a
bindings.1.channel 1
bindings.2.slave b
bindings.2.channel 0
bindings.3.slave b
bindings.3.channel 1
pcm.MixReale {
type dmix
ipc_key 1024
slave {
pcm "hw:0,0"
rate 48000
#rate 44100
periods 128
period_time 0
period_size 1024 # must be power of 2
buffer_size 8192
pcm.MixLoopback {
type dmix
ipc_key 1025
slave {
pcm "hw:Loopback,0,0"
rate 48000
#rate 44100
periods 128
period_time 0
period_size 1024 # must be power of 2
buffer_size 8192
Last edited by rayanamukami (2014-07-05 14:05:20)

You might want to take a look here and here.

I have a hp hpe-595a, i'm trying to use stereo mix with a hot mic. anyone know how to do this?

I'm trying to sing along with the music in the chat program Paltalk and also host a music room on the same program, I can only use the mic or stereo mix but not both at the same time.
I have been using this chat program for over 5yrs and have always been able to use Stereo mix with the mic active, using the realteck codecs or soundblaster (what you hear)
I can't do this with the IDT codecs supplied.

Hey Redritr,
Thanks for the question. iTunes purchases are billed to Store Credits first, before Credit Cards, as outlined by the following article:
When making purchases, content credits are used first, followed by Gift Certificate, iTunes Card, or Allowance Account credits; your credit card or PayPal account is then charged for any remaining balance.
via iTunes Store: How iTunes Store purchases are billed
http://support.apple.com/kb/HT5582
It also may be that the iTunes Store is prompting to verify your billing information:
When there is a mismatch between the iTunes Store's records and your credit card company's records, you will receive an error message stating that your credit card's security code isn't valid or that your zip code does not match your bank's records.
In most cases, this issue is caused by a formatting error in the billing address that you have provided. You can correct the issue by verifying that the information you have provided is correct, or by changing the format of your address to match the format that your credit card company has on file.
via iTunes Store: My credit card's security code or zip code does not match my bank's records
http://support.apple.com/kb/TS1646
Additional Information:
Why can’t I select None when I edit my payment information?
http://support.apple.com/kb/TS5366
Thanks,
Matt M.

Surround Mix with Logitech Z-5500 Digital

Hello,
I have a project for a 3D animation short movie, and I'll also make the score and sound effect for it, to make a DVD.
I don't have Logic Pro yet; I have Logic Express.
Is it possible to use a Logitech Z-5500 Digital set to do the surround mix with Logic Pro ? Using the optical digital out ?
I have a very limited budget, so I'm looking for the cheapest solution possible, with the best possible sound.
I'm waiting for a Mac Pro 2.66 with an ATI graphic cards (for Motion and 3D).
Thanks.
G4 1.42Ghz Mac OS X (10.4.7)

can't you pick the surround soundtrack in the control bar that is displayed close to the bottom of the movie window when you start one in iTunes? If theres no surround track, it cannot be done, furthermore, the speakers must be run from a surround home theatre receiver. Messing around with it on one of my desktops, I can choose the surround channel, but since it only has 2 built in speakers, I obviously won't get 5.1 (L/R front, center, L/R rear, and subwoofer). I agree iTunes should have preference that surround is automatically decoded when a surround track is available much like it's a preference in DVD player. I still haven't figured that one out.
Marty

I cant record a mix onto my imac using my headphone port? Any ideas?

Im trying to record a mix onto my Imac using the headphone port....i was hoping that the line in button would be there but its not....
Can someone help?

if apple headset for ios devices works with macs also for input then it's because the non std. way of adding input into the minijack std which officially support no input only output is not wired with the cable you are trying to connect you can likely buy a converter or cannibalise a iphone headset and makeyour own
link to apple headset pinout
here is the pin out
http://pinouts.ru/HeadsetsHeadphones/iphone_headphone_pinout.shtml

Never used microphone input before, sound recorder window okay, no sound output.

Sound from sound recorder input goes nowhere, a sound window is supposed to open, it does not.
There is some software missing in my pavilion g7 laptop. Media player sound is fine, internet sound
is fine, only sound missing is from the microphone input. The sound recorder window is open and the
recording bar is moving as the input varies, how do I get the sound to the speakers. Never used this
option before, it might be defective from the factory.
This question was solved.
View Solution.

Problem solved. You cannot turn on computer with the microphone or other audio cable plugged in.
Otherwise the computer does not respond to the inputs, you have to plug in the microphone or audio
cable after logging in and then a window will open that allows you to select the that input over the default.

Recording a mix into Logic??

I'm wanting to record a mix, but not sure whether you can do it in Logic...anyone got any ideas?
Cheers
Ibook G4 1.33 GHz Mac OS X (10.4.3)

Hi
If you want to mix stuff within logic: audio files and soft instruments then go to file and choose BOUNCE.
or open your audio environment windows, look for your output fader and there should be a bounce button on the bottom. You can then save your bounce as several file formats or burn a CD (depending on your logic version).
for further information open the help window whithin logic,go to logic reference manual and on the search box type MIXDOWN or Bounce.

Recording a Mix CD need help please

I recorded my mix CD in GB its one big trck how can I cut it town to make different song on one mix CD and how do I export it all to Itunes I can export the whole one trake into itunes but its one long song. Thanks Matt.

Without an audio editor:
1. Cut your big track into little pieces, using the apple-T command.
2. Put each song on a different track (create new tracks by selecting "new basic track" from the track menu, pull the little song sniplets down so each starts on bar no. 1).
3. Solo track 1, which should contain one song now (soloing means: click the little headphone symbol on the track controls, so you hear only one track).
4. Move the purple triangle in the "ruler" that is probably sitting where you "big" song ended to the end of the song in track 1.
5. Choose "export to iTunes".
6. Repeat this with every track, starting from no. 3.
Then you probably have several songs with the same name in iTunes - just go ahead and rename them.

HT2929 record live set with garageband

hi, is it possible to record a liveset with garageband through my mac connected to my mixer ?
rgds niels

niels van der burg wrote:
is it possible to record a liveset with garageband through my mac connected to my mixer ?
yes, plug the console into the line-IN on the mac and set up GB:
http://www.bulletsandbones.com/GB/GBFAQ.html#recordlinein
(Let the page FULLY load. The link to your answer is at the top of your screen)
however GB would not be my recommended choice, especiall if the recording is to be unattended. if GB throws a modal error dialog it will cease recording; an audio editor is often a better choice:
http://www.bulletsandbones.com/GB/GBFAQ.html#audioeditors
(Let the page FULLY load. The link to your answer is at the top of your screen)

Record Windows Mixer with MAudio?

Similar Messages

Maybe you are looking for