Record with two usb devices at the same time on LOGIC PRO X

I would like to record both with my Samson USB mic and my guitar wich has also a USB input in the same time. How do i make that happen? Logic Pro X only sees one device whilst recording.

You need to create an aggregate device in OSX, and then select that as your audio device in Logic's options.
Then whatever you've set up as the inputs will be selectable within the logic audio buses.
Here's an official Apple article to get you on your way:-
http://support.apple.com/kb/HT3956
Any more questions please post back.

Similar Messages

How to sync with two computers not at the same time, I'm registerd with one computer

How to sync with two computers (not at the same time), I'm registered with one computer and am trying to connect with second computer with same iPhone. To sync the first time with the second PC "Firefox Sync Option tells me Create New account or Connect, when I connect it gives me a Passcode and on iPhone it also gives me a Passcode, than how do I connect? Both the iPhone and PC gives me a Passcode and have now idea what to do with them.
Where do I find my Sync Key ? so I can install manually if it works ?

Use the Sync Key ''(Recovery Key)'' from the PC that you used to initially setup your Firefox Sync service, when setting up that 2nd PC with Sync. You need to use '''Add a device''' to setup the 2nd and subsequent devices on a Sync account. <br />
https://support.mozilla.com/en-US/kb/add-a-device-to-firefox-sync

Collecting data from advantech-usb4704 with two different apps at the same time

I wonder if I can access to Advantech-4704 with two different applications at the same time?
I use this block in my vis.
I have enough ports, but inputs are needed in completely different applications. Do I have to close one of them or can they run simultaneously?
Thankyou!

Dear gtu,
as nathand said, usually it is not supported to access the same physical resource simultaneously from multiple programs. In case of DAQmx for instance, you will get an error message which says that the resource is already reserved. I suppose the same would happen with your driver, however it might be worth a try.
One workaround could be however if you revise your applications and merge the codes if it is possible so that no concurent resource allocation takes place.
Best Regards,
Adam Cseh
Applications/Systems Engineer
National Instruments

Is is possible to open event lists from different tracks at the same time in Logic Pro 9?

Is it possible to open event lists from two difference tracks in an arrangement at the same time in Logic Pro 9?
When I switch between tracks the event list swiches as well. Thanks in advance.

If you deselect the litte chain link icon in the event list window, it will no longer follow your region selection and you can openas many as you need. Also you can select multiple regions and see the inthe SAME window if you select to show multiple regions, and you can have the notes shown in their respective track colors.

Recording two USB mics at the same time

Is there any kind of special set up needed to record two usb microphones into Garageband at the same time – and so they record onto two different tracks.
Thanks,
Ray

Is that in System Preferences or is it an app in
Applications?
It's an App in /Applications/Utilities/
Can you give some more details?
Launch Audio MIDI Setup and check the Help.
I would not have ever thought to
look at MIDI settings to record vocals from a mic.
Well it is Audio MIDI Setup B-)>
guess I thought maybe I would be able to select each
mic just using GarageBand.
GarageBand only allows you to choose a single device for Input.
--HangTime [Will Compute for Food] B-|>

Two airplay devices at the same time

Hello,
I've tried to mirror my mac via airplay to my apple tv and seperatly airplay the sound to my Harman&Kardon "Aura" but every time I try to change the sound output while mirroring it just disconnects from my apple tv and connects to the sound system. Is there a possibility to connect my mac to apple tv and the sound system via airplay at the same time?

Thanks. After restoring the AE I've gotten it "sort-of" working couple of times but it's taking a lot of time from the itunes to connect to an airport express now. Mostly it works after a long wait but not always. Certainly it's taking longer than before, and one of the AE's is dropping now constantly from the list and needs to be rebooted every now and then.

How do I use 2 Core Audio devices at the same time in Logic w/out switching

Hello, I use the Aardvark Direct Mix usb3 as my audio interface for mic and guitar. I just upgraded to Logic Pro 7 today and was hoping someone could tell me how I could use the Built-in Audio Core Audio driver along with the Direct Mix USB Core Audio Driver at the same time without having to switch Core Audio Driver's and than rebooting Logic. It is very frustrating doing that as well as not being able to hear my Logic audio during playback/record mode when I am trying to record via the USB3. WHat can I do? Thanks! If ther are both core audio, why can I not just use both of them at the same time? Why must a switch back and forth? Thanks!
[email protected]

THanks everyone! awsome article! Thanks for posting it, nh!
The weird thing is, once I go up to the Menu and select Open Aggregate Device Editor in the AUDIO/MIDI setup utility and try to add a new Aggregate Device setup (step # 6 from the link), the only audio device available is the "Built-in Audio". What's weird is when I have the main Audio MIDI Setup utility open, every single drop-down menu/tab has the "Direct Mix USB 3 1.0.9.1" device right beneath the "Built-in Audio" option. To me that says that the core audio device is indeed recognized by my computer (obviously since I can record with it using Logic). Can anyone help me with this one? Any suggestions?
Not that it should matter but, the hardware audio interface that I am using is made by the no-longer-existant company once known as Aardvark. I actually had to purchase a third party Core Audio driver just to have it recognized by OS X.
This is the website where I purchased my audio driver :
http://www.usb-audio.com/
A little more on how this device and it's core audio driver function within Logic . . . (Hopefully this might clarify something I may be screwing up) . . .
I launch Logic with its default Built-in Audio which allows playback of audio from the app. I than go up to Audio Hardware and Drivers and than drop the flip down Driver menu down to the second option, "Direct Mix USB 3 1.0.9.1." Logic than prompts me that I should try to (re)launch Logic Pro to load the appropriate CoreAudio.. I do that. Now I am ready to record guitar through the Direct Mix USB3, I just can't hear anything (unless I use head phones as an output from the Direct Mix).
Anyway, you all probably already knew what I meant so explaining that was pointless. But my question is, if the Driver is obviously recognized by my comp in both the Audio MIDI Setup and in Logic, than why won't the Direct Mix device show up as a possibility for setting up an aggregate device? Any suggestions? Thanks!
Power Mac G5 Dual 2.7Ghz 4.5gigs of RAM Mac OS X (10.4.7)
Power Mac G5 Dual 2.7Ghz 2.5gigs of RAM Mac OS X (10.4)

Playing two midi keyboards at the same time in logic for live show

hello, i have a macbook pro 2.16 cpu, os 10.4.7, logic 7.1.1 and 7.2 is on the way
1 gb of ram
a tascma us-428 inerface
i want to be able to play two diffrent midi keyboards at the same time is their a way to have one digital instrament for on keyboard, and another midi keyboard on a diffrent digital instrament at the same time, so as to play a live show?
and also if i want to chang the intrament in the middle of a song becase it switches half way throw the song, is it posble to atomate this switch insted of doing it by hand? please help! thank you.

here is some good reading regarding patch change
http://discussions.apple.com/thread.jspa?messageID=2931940&#2931940
http://discussions.apple.com/thread.jspa?messageID=1993033&#1993033
http://www.logicprohelp.com/viewtopic.php?t=1045&highlight=instrumentprogram+programmechange

Cannot work with two Swing app. at the same time.

Hi guys,
I bring this problem here may somebody experienced that.
I developed two client side applications(applets). Locate them on Apache/Tomcat. There is also a Index.html file with two links, so when user clicks on each link the associated application will downloaded on his/her PC and ready to work. (In index.html I used JavaScript function window.open(?) to load the applications)
Now please see this scenario:
1-I ran/loaded both application in two separate browsers(IE5.5). And tried to work with them(minimized one and work with another). Soon I faced unexpected frizzing/locking or very slow running on both applications.
2-Then closed/killed one of them(killed IE). Then re-executed same application again. The application loaded with the last activated screen . Seems it never killed and it was still alive.
3- The only way to successfully working is one by one. Means execute & work with one, then kill that, and then execute and work with another.
To Debug:
When both applications were running(each on it?s own IE), I opened the Task Manager and saw there was only one IEXPLORER.EXE was running, also there was only one Java VM (a little bird icon) on right-bottom of the screen.
I believe this causes the problem. Seems they both running in the same session. Since I opened two applications in two IE I was expected to see two IEXPLORER.EXE with two JVM. Am I right? Do you think so?
Note that the two app. have no Communication with each other.
Any way, Now I am seeking to find the solution. My primary mind says probably I should not use window.open(..) in index.html to load the applications.
Would appreciate any command on this.

I am also facing the same problem !
Since this may be a very late reply , if any body has a solution pls share!
What I understand is that when we use javascript:window.open() it opens a new browser window
but under same JVM. This is helpful if we need to have a 'Close window' button/link in the newly opened window and use javascript:window.close() there. Then browser will not show us the confirmation dialog box 'Webpage you are viewing is trying to close the window. Do you wish to Proceed?'
But if we want a new JVM for each opened link and also donot want the popup dialog to be displayed when we close the browser from there..what do we do??

How do i copy several tracks at the same time in Logic Pro or is there a way to set multiple loops in one song?

For example in an AABA song format, do I have to record the 3 As and then do another to fade out and end? Seems like it would be much easier to create the part once and tell LP how many times and when to repeat each part. HELP!!

Do you have to copy each track separately? It would be much easier if I could select all the tracks together for copying/pasting.
You cannot select multiple tracks in LP9, but you CAN select multiple regions. Use Shift-Click to select the parts on the tracks you want to copy, then hold the "option" key and drag them to the new position. This will create a copy at the new position.
Let's say you have tracks for piano, drums and bass. In the arrange window, click on the 8-bar "A" part for piano. Hold shift key and click on the drums region then again for the bass region. All three will be selected. Now hold the option key and drag all three sections to the right to place them on bar 25.
Also, how do you specify that you only want to loop X times? I can get a perpetual loop but I have to turn it off to get it to stop. This is very inconvenient when I'm playing.
You can control looping in a few ways.
1. Go to a region that does NOT have looping checked. Click near the TOP RIGHT of the region in the arrange window. Drag to the right to specify where the looping will stop. This is tricky... if you click too low, it will extend the length of the region. You must click the correct spot near the top to control looping.
2. For a region where looping is checked, go to the end of the region in the arrange window (at the end of the song) and do as #1 above. Drag to the left until you reach the point where you want the region to stop looping.
3. Use the "pencil" tool to create a blank region where you want the first region to stop looping. If your 8-bar verse is repeating once, create a blank region at bar 17. The first region will stop looping there.
Hope this helps.

HP DV7 laptop, cant listen and talk from 2 usb headsets at the same time??

Hi,
I am trying to use two usb headsets at the same time as my wife and I are doing an online course, but can onle use either one at onc, not both?? Has anyone got any ideas?
Thanks, Matt

Hello Mattynsavvy, welcome to the HP Forums.
It appears that you're trying to use two headphones from your notebook to do an online course.
The way that you're trying to do this probably won't work. The notebook itself only has one sound card. This card can only output audio to one device at a time. So if you have both USB headsets into ports. Only one will have sound. Just like how the headset cuts off the speakers. You would need a second sound card, or to be using speakers or another computer.
The only thing I could think of that may accomplish what you're trying is to use the audio/mic jacks on the notebook specifically with a splitter. This may allow the sound to be direct to two headsets. I can not say for certain if this will work or not.
I was able to find a few YouTube videos with various ways to achieve what you're trying to do, but as they run with 3rd party software attempting those suggestions would be completely up to you.
I hope this helps.
Thank you for posting on the HP Forums.
I worked on behalf of HP.

Can I have a Face Time conversation between two Apple devices using the same Apple ID?

Can I have a Face Time conversation between two Apple devices using the same Apple ID?

Yes, you can, but the two devices can't have the same e mail address associated with both. Each, device needs its own unique e mail ADR. In your case, the iPod can call your iPhone if you use the phone number, but the iPhone can not call your iPod because it must use the e mail address, and if the email address is the same on both, the iPhone will think it's calling itself, so the call will not go through.

How do I sync two ipods with two different IDs on the same computer?

How do I sync two ipods with two different IDs on the same computer?

Simply connect them. One computer with one iTunes can manage multiple devices. They're tracked by S/N but you might wish to assign them unique names so that you can track them yourself.
The only minor issue is app updating and purchases while on the computer. It's necessary to log out and back in to the "correct" ID. Much easier to do these things from the iPods.

Bluetooth - Connecting two devices at the same time on a Run (Bluetooth Mot headset

I would like to connect two Bluetooth devised at the same time on my runs. (Bluetooth Motorola headset (S10-HD) and Polars heart monitor (H7) at the same time) is that possible?

fitnessdr wrote:
Thank you for the information. So if I were to return the new bluetooth keyboard, should I purchase the "Palm 3169WWZ Wireless Keyboard", or is there another model I should be looking for? (From what I can tell, I believe this one will use IR.)
THANKS!
Correct, that's the one I use.
Be sure to download the newest driver (1.13) for the keyboard from the Palm Support pages for the keyboard:
http://kb.palm.com/wps/portal/kb/na/keyboards/palmuniversalwirelesskeyboard/unlocked/downloads/page_...
Do not install the driver that comes with the device on the disk - 1.13 is designed for the TX and fixes a bug that existed in the original driver.
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Can two Palm devices use the same Hot Sync ID?

Can two Palm devices share the same Hot Sync ID using the same desktop? I presently owe a Treo 700p with a lot of purchased software. I'm considering buying a Palm TX handheld and would like to use both devices using the same Hot Sync ID. Is this possible and should there be any synchronization issues if they are syncing to the same desktop?
Post relates to: Treo 700p (Sprint)
Post relates to: Treo 700p (Sprint)

You will be assured of unpredictable device behavior, random crashes, spontaneous resets, and other delights described in one of the boxes in the Read This First flyer if you sync two very different device models (phone vs. PDA, different screen sizes, etc.) to the same Hotsync ID on the same computer.
This can be done but you will have to treat each sync as an Upgrade, rename the Backup folder, and reinstall third-party applications, reset your preferences, basically the entire process involving multiple syncs every time you sync. I don't think the headache involved is worth it.
Suggest you decide which third-party apps you want on your second device and get an additional licence and registration from the developers.
Post relates to: Palm TX

Record with two usb devices at the same time on LOGIC PRO X

Similar Messages

Maybe you are looking for